提交 0fff21a8 编写于 作者: J Jassi Brar 提交者: Mark Brown

ASoC: SMDK64XX: Move to use new I2S driver

Modify the smdk64xx_wm8580.c to use new i2s controller driver.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 fcd8c742
......@@ -74,7 +74,7 @@ config SND_S3C64XX_SOC_WM8580
tristate "SoC I2S Audio support for WM8580 on SMDK64XX"
depends on SND_S3C24XX_SOC && MACH_SMDK6410
select SND_SOC_WM8580
select SND_S3C64XX_SOC_I2S_V4
select SND_SAMSUNG_I2S
help
Say Y if you want to add support for SoC audio on the SMDK6410.
......
......@@ -19,7 +19,7 @@
#include "../codecs/wm8580.h"
#include "dma.h"
#include "s3c64xx-i2s.h"
#include "i2s.h"
/*
* Default CFG switch settings to use this driver:
......@@ -95,17 +95,6 @@ static int smdk64xx_hw_params(struct snd_pcm_substream *substream,
if (ret < 0)
return ret;
ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_CDCLK,
0, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
/* We use PCLK for basic ops in SoC-Slave mode */
ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_PCLK,
0, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
/* Set WM8580 to drive MCLK from its PLLA */
ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
WM8580_CLKSRC_PLLA);
......@@ -122,14 +111,6 @@ static int smdk64xx_hw_params(struct snd_pcm_substream *substream,
if (ret < 0)
return ret;
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_BCLK, bfs);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_RCLK, rfs);
if (ret < 0)
return ret;
return 0;
}
......@@ -223,7 +204,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = {
{ /* Primary Playback i/f */
.name = "WM8580 PAIF RX",
.stream_name = "Playback",
.cpu_dai_name = "samsung-i2s-v4",
.cpu_dai_name = "samsung-i2s.2",
.codec_dai_name = "wm8580-hifi-playback",
.platform_name = "samsung-audio",
.codec_name = "wm8580-codec.0-001b",
......@@ -233,7 +214,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = {
{ /* Primary Capture i/f */
.name = "WM8580 PAIF TX",
.stream_name = "Capture",
.cpu_dai_name = "samsung-i2s-v4",
.cpu_dai_name = "samsung-i2s.2",
.codec_dai_name = "wm8580-hifi-capture",
.platform_name = "samsung-audio",
.codec_name = "wm8580-codec.0-001b",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册