提交 0f97b69a 编写于 作者: M Mark Brown

Merge remote-tracking branch 'asoc/topic/fsl' into tmp

Freescale i.MX audio complex with S/PDIF transceiver
Required properties:
- compatible : "fsl,imx-audio-spdif"
- model : The user-visible name of this sound complex
- spdif-controller : The phandle of the i.MX S/PDIF controller
Optional properties:
- spdif-out : This is a boolean property. If present, the transmitting
function of S/PDIF will be enabled, indicating there's a physical
S/PDIF out connector/jack on the board or it's connecting to some
other IP block, such as an HDMI encoder/display-controller.
- spdif-in : This is a boolean property. If present, the receiving
function of S/PDIF will be enabled, indicating there's a physical
S/PDIF in connector/jack on the board.
* Note: At least one of these two properties should be set in the DT binding.
Example:
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-out;
spdif-in;
};
......@@ -193,6 +193,16 @@ config SND_SOC_IMX_SGTL5000
Say Y if you want to add support for SoC audio on an i.MX board with
a sgtl5000 codec.
config SND_SOC_IMX_SPDIF
tristate "SoC Audio support for i.MX boards with S/PDIF"
select SND_SOC_IMX_PCM_DMA
select SND_SOC_FSL_SPDIF
select SND_SOC_SPDIF
help
SoC Audio support for i.MX boards with S/PDIF
Say Y if you want to add support for SoC audio on an i.MX board with
a S/DPDIF.
config SND_SOC_IMX_MC13783
tristate "SoC Audio support for I.MX boards with mc13783"
depends on MFD_MC13783 && ARM
......
......@@ -45,6 +45,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
snd-soc-wm1133-ev1-objs := wm1133-ev1.o
snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
snd-soc-imx-wm8962-objs := imx-wm8962.o
snd-soc-imx-spdif-objs :=imx-spdif.o
snd-soc-imx-mc13783-objs := imx-mc13783.o
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
......@@ -53,4 +54,5 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o
obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o
obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
......@@ -555,7 +555,6 @@ struct snd_soc_dai_ops fsl_spdif_dai_ops = {
/*
* ============================================
* FSL SPDIF IEC958 controller(mixer) functions
*
* Channel status get/put control
......@@ -563,7 +562,6 @@ struct snd_soc_dai_ops fsl_spdif_dai_ops = {
* Valid bit value get control
* DPLL lock status get control
* User bit sync mode selection control
* ============================================
*/
static int fsl_spdif_info(struct snd_kcontrol *kcontrol,
......@@ -942,11 +940,7 @@ static const struct snd_soc_component_driver fsl_spdif_component = {
.name = "fsl-spdif",
};
/*
* ================
* FSL SPDIF REGMAP
* ================
*/
/* FSL SPDIF REGMAP */
static bool fsl_spdif_readable_reg(struct device *dev, unsigned int reg)
{
......@@ -1119,10 +1113,8 @@ static int fsl_spdif_probe(struct platform_device *pdev)
}
regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(regs)) {
dev_err(&pdev->dev, "could not map device resources\n");
if (IS_ERR(regs))
return PTR_ERR(regs);
}
spdif_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
"core", regs, &fsl_spdif_regmap_config);
......@@ -1184,7 +1176,7 @@ static int fsl_spdif_probe(struct platform_device *pdev)
&spdif_priv->cpu_dai_drv, 1);
if (ret) {
dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
goto error_dev;
return ret;
}
ret = imx_pcm_dma_init(pdev);
......@@ -1197,8 +1189,6 @@ static int fsl_spdif_probe(struct platform_device *pdev)
error_component:
snd_soc_unregister_component(&pdev->dev);
error_dev:
dev_set_drvdata(&pdev->dev, NULL);
return ret;
}
......@@ -1207,7 +1197,6 @@ static int fsl_spdif_remove(struct platform_device *pdev)
{
imx_pcm_dma_exit(pdev);
snd_soc_unregister_component(&pdev->dev);
dev_set_drvdata(&pdev->dev, NULL);
return 0;
}
......
......@@ -1114,7 +1114,6 @@ static int fsl_ssi_probe(struct platform_device *pdev)
snd_soc_unregister_component(&pdev->dev);
error_dev:
dev_set_drvdata(&pdev->dev, NULL);
device_remove_file(&pdev->dev, dev_attr);
error_clk:
......
/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/module.h>
#include <linux/of_platform.h>
#include <sound/soc.h>
struct imx_spdif_data {
struct snd_soc_dai_link dai[2];
struct snd_soc_card card;
struct platform_device *txdev;
struct platform_device *rxdev;
};
static int imx_spdif_audio_probe(struct platform_device *pdev)
{
struct device_node *spdif_np, *np = pdev->dev.of_node;
struct imx_spdif_data *data;
int ret = 0, num_links = 0;
spdif_np = of_parse_phandle(np, "spdif-controller", 0);
if (!spdif_np) {
dev_err(&pdev->dev, "failed to find spdif-controller\n");
ret = -EINVAL;
goto end;
}
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
dev_err(&pdev->dev, "failed to allocate memory\n");
ret = -ENOMEM;
goto end;
}
if (of_property_read_bool(np, "spdif-out")) {
data->dai[num_links].name = "S/PDIF TX";
data->dai[num_links].stream_name = "S/PDIF PCM Playback";
data->dai[num_links].codec_dai_name = "dit-hifi";
data->dai[num_links].codec_name = "spdif-dit";
data->dai[num_links].cpu_of_node = spdif_np;
data->dai[num_links].platform_of_node = spdif_np;
num_links++;
data->txdev = platform_device_register_simple("spdif-dit", -1, NULL, 0);
if (IS_ERR(data->txdev)) {
ret = PTR_ERR(data->txdev);
dev_err(&pdev->dev, "register dit failed: %d\n", ret);
goto end;
}
}
if (of_property_read_bool(np, "spdif-in")) {
data->dai[num_links].name = "S/PDIF RX";
data->dai[num_links].stream_name = "S/PDIF PCM Capture";
data->dai[num_links].codec_dai_name = "dir-hifi";
data->dai[num_links].codec_name = "spdif-dir";
data->dai[num_links].cpu_of_node = spdif_np;
data->dai[num_links].platform_of_node = spdif_np;
num_links++;
data->rxdev = platform_device_register_simple("spdif-dir", -1, NULL, 0);
if (IS_ERR(data->rxdev)) {
ret = PTR_ERR(data->rxdev);
dev_err(&pdev->dev, "register dir failed: %d\n", ret);
goto error_dit;
}
}
if (!num_links) {
dev_err(&pdev->dev, "no enabled S/PDIF DAI link\n");
goto error_dir;
}
data->card.dev = &pdev->dev;
data->card.num_links = num_links;
data->card.dai_link = data->dai;
ret = snd_soc_of_parse_card_name(&data->card, "model");
if (ret)
goto error_dir;
ret = snd_soc_register_card(&data->card);
if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card failed: %d\n", ret);
goto error_dir;
}
platform_set_drvdata(pdev, data);
goto end;
error_dir:
if (data->rxdev)
platform_device_unregister(data->rxdev);
error_dit:
if (data->txdev)
platform_device_unregister(data->txdev);
end:
if (spdif_np)
of_node_put(spdif_np);
return ret;
}
static int imx_spdif_audio_remove(struct platform_device *pdev)
{
struct imx_spdif_data *data = platform_get_drvdata(pdev);
if (data->rxdev)
platform_device_unregister(data->rxdev);
if (data->txdev)
platform_device_unregister(data->txdev);
snd_soc_unregister_card(&data->card);
return 0;
}
static const struct of_device_id imx_spdif_dt_ids[] = {
{ .compatible = "fsl,imx-audio-spdif", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_spdif_dt_ids);
static struct platform_driver imx_spdif_driver = {
.driver = {
.name = "imx-spdif",
.owner = THIS_MODULE,
.of_match_table = imx_spdif_dt_ids,
},
.probe = imx_spdif_audio_probe,
.remove = imx_spdif_audio_remove,
};
module_platform_driver(imx_spdif_driver);
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("Freescale i.MX S/PDIF machine driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:imx-spdif");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册