Staging: ipack: added support for the TEWS TPCI-200 carrier board

Driver for the carrier board TEWS TPCI-200, a bridge between PCIe bus and
IndustryPack bus.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/ipack/Kconfig

@@ -7,3 +7,8 @@ menuconfig IPACK_BUS
 	---help---
 	  If you say Y here you get support for the IndustryPack Framework.
 
+if IPACK_BUS
+
+source "drivers/staging/ipack/bridges/Kconfig"
+
+endif # IPACK

drivers/staging/ipack/Makefile

@@ -2,3 +2,4 @@
 # Makefile for the IPACK bridge device drivers.
 #
 obj-$(CONFIG_IPACK_BUS)		+= ipack.o
+obj-y				+= bridges/

drivers/staging/ipack/TODO

@@ -12,6 +12,16 @@ operations between the two kind of boards.
 TODO
 ====
 
+TPCI-200
+--------
+
+* It receives the name of the mezzanine plugged in each slot by SYSFS.
+  No autodetection supported yet, because the mezzanine driver could not be
+  loaded at the time that the tpci200 driver loads.
+
+* It has a linked list with the tpci200 devices it is managing. Get rid of it
+  and use driver_for_each_device() instead.
+
 Ipack
 -----
 

drivers/staging/ipack/bridges/Kconfig

+config BOARD_TPCI200
+	tristate "TEWS TPCI-200 support for IndustryPack bus"
+	depends on IPACK_BUS
+	depends on PCI
+	help
+	  This driver supports the TEWS TPCI200 device for the IndustryPack bus.
+	default n
+

drivers/staging/ipack/bridges/Makefile

+obj-$(CONFIG_BOARD_TPCI200) += tpci200.o

drivers/staging/ipack/bridges/tpci200.h

+/**
+ * tpci200.h
+ *
+ * driver for the carrier TEWS TPCI-200
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef _TPCI200_H_
+#define _TPCI200_H_
+
+#include <linux/version.h>
+#include <linux/limits.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/swab.h>
+#include <linux/io.h>
+
+#include "../ipack.h"
+
+#define TPCI200_SHORTNAME "TPCI200"
+
+#define TPCI200_NB_SLOT               0x4
+#define TPCI200_NB_BAR                0x6
+
+#define TPCI200_VENDOR_ID             0x1498
+#define TPCI200_DEVICE_ID             0x30C8
+#define TPCI200_SUBVENDOR_ID          0x1498
+#define TPCI200_SUBDEVICE_ID          0x300A
+
+#define TPCI200_IP_INTERFACE_BAR      2
+#define TPCI200_IO_ID_INT_SPACES_BAR  3
+#define TPCI200_MEM16_SPACE_BAR       4
+#define TPCI200_MEM8_SPACE_BAR        5
+
+#define TPCI200_REVISION_REG          0x00
+#define TPCI200_CONTROL_A_REG         0x02
+#define TPCI200_CONTROL_B_REG         0x04
+#define TPCI200_CONTROL_C_REG         0x06
+#define TPCI200_CONTROL_D_REG         0x08
+#define TPCI200_RESET_REG             0x0A
+#define TPCI200_STATUS_REG            0x0C
+
+#define TPCI200_IFACE_SIZE            0x100
+
+#define TPCI200_IO_SPACE_OFF          0x0000
+#define TPCI200_IO_SPACE_GAP          0x0100
+#define TPCI200_IO_SPACE_SIZE         0x0080
+#define TPCI200_ID_SPACE_OFF          0x0080
+#define TPCI200_ID_SPACE_GAP          0x0100
+#define TPCI200_ID_SPACE_SIZE         0x0040
+#define TPCI200_INT_SPACE_OFF         0x00C0
+#define TPCI200_INT_SPACE_GAP         0x0100
+#define TPCI200_INT_SPACE_SIZE        0x0040
+#define TPCI200_IOIDINT_SIZE          0x0400
+
+#define TPCI200_MEM8_GAP              0x00400000
+#define TPCI200_MEM8_SIZE             0x00400000
+#define TPCI200_MEM16_GAP             0x00800000
+#define TPCI200_MEM16_SIZE            0x00800000
+
+#define TPCI200_INT0_EN               0x0040
+#define TPCI200_INT1_EN               0x0080
+#define TPCI200_INT0_EDGE             0x0010
+#define TPCI200_INT1_EDGE             0x0020
+#define TPCI200_ERR_INT_EN            0x0008
+#define TPCI200_TIME_INT_EN           0x0004
+#define TPCI200_RECOVER_EN            0x0002
+#define TPCI200_CLK32                 0x0001
+
+#define TPCI200_A_RESET               0x0001
+#define TPCI200_B_RESET               0x0002
+#define TPCI200_C_RESET               0x0004
+#define TPCI200_D_RESET               0x0008
+
+#define TPCI200_A_TIMEOUT             0x1000
+#define TPCI200_B_TIMEOUT             0x2000
+#define TPCI200_C_TIMEOUT             0x4000
+#define TPCI200_D_TIMEOUT             0x8000
+
+#define TPCI200_A_ERROR               0x0100
+#define TPCI200_B_ERROR               0x0200
+#define TPCI200_C_ERROR               0x0400
+#define TPCI200_D_ERROR               0x0800
+
+#define TPCI200_A_INT0                0x0001
+#define TPCI200_A_INT1                0x0002
+#define TPCI200_B_INT0                0x0004
+#define TPCI200_B_INT1                0x0008
+#define TPCI200_C_INT0                0x0010
+#define TPCI200_C_INT1                0x0020
+#define TPCI200_D_INT0                0x0040
+#define TPCI200_D_INT1                0x0080
+
+#define TPCI200_SLOT_INT_MASK         0x00FF
+
+#define VME_IOID_SPACE  "IOID"
+#define VME_MEM_SPACE  "MEM"
+
+/**
+ * struct slot_irq - slot IRQ definition.
+ * @vector	Vector number
+ * @handler	Handler called when IRQ arrives
+ * @arg		Handler argument
+ * @name	IRQ name
+ *
+ */
+struct slot_irq {
+	int          vector;
+	int         (*handler)(void *);
+	void         *arg;
+	char         name[IPACK_IRQ_NAME_SIZE];
+};
+
+/**
+ * struct tpci200_slot - data specific to the tpci200 slot.
+ * @slot_id	Slot identification gived to external interface
+ * @irq		Slot IRQ infos
+ * @io_phys	IO physical base address register of the slot
+ * @id_phys	ID physical base address register of the slot
+ * @mem_phys	MEM physical base address register of the slot
+ *
+ */
+struct tpci200_slot {
+	struct ipack_device	*dev;
+	struct slot_irq		*irq;
+	struct ipack_addr_space io_phys;
+	struct ipack_addr_space id_phys;
+	struct ipack_addr_space mem_phys;
+};
+
+/**
+ * struct tpci200_infos - informations specific of the TPCI200 tpci200.
+ * @pci_dev		PCI device
+ * @interface_regs	Pointer to IP interface space (Bar 2)
+ * @ioidint_space	Pointer to IP ID, IO and INT space (Bar 3)
+ * @mem8_space		Pointer to MEM space (Bar 4)
+ * @access_lock		Mutex lock for simultaneous access
+ *
+ */
+struct tpci200_infos {
+	struct pci_dev			*pdev;
+	struct pci_device_id		*id_table;
+	void				*interface_regs;
+	void				*ioidint_space;
+	void				*mem8_space;
+	spinlock_t			access_lock;
+	struct ipack_bus_device		drv;
+};
+struct tpci200_board {
+	struct list_head	list;
+	unsigned int		number;
+	struct mutex		mutex;
+	struct tpci200_slot	*slots;
+	struct tpci200_infos	*info;
+};
+
+#endif /* _TPCI200_H_ */