提交 0e09a3c9 编写于 作者: M Mauro Carvalho Chehab

[media] tvp5150: device detection should be done only once

Having the device detection happening at reset is bad, as every time,
it will produce a message like:
	tvp5150 2-005c: tvp5150am1 detected.

This only polutes the log and for an accidental kernel hacker, it looks
like a real problem. So, move those printk's to happen during device
probe.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 437f5fa3
...@@ -737,27 +737,6 @@ static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) ...@@ -737,27 +737,6 @@ static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
static int tvp5150_reset(struct v4l2_subdev *sd, u32 val) static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
{ {
struct tvp5150 *decoder = to_tvp5150(sd); struct tvp5150 *decoder = to_tvp5150(sd);
u8 msb_id, lsb_id, msb_rom, lsb_rom;
msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
/* ITU-T BT.656.4 timing */
tvp5150_write(sd, TVP5150_REV_SELECT, 0);
} else {
if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
} else {
v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
msb_id, lsb_id);
v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
}
}
/* Initializes TVP5150 to its default values */ /* Initializes TVP5150 to its default values */
tvp5150_write_inittab(sd, tvp5150_init_default); tvp5150_write_inittab(sd, tvp5150_init_default);
...@@ -977,6 +956,7 @@ static int tvp5150_probe(struct i2c_client *c, ...@@ -977,6 +956,7 @@ static int tvp5150_probe(struct i2c_client *c,
{ {
struct tvp5150 *core; struct tvp5150 *core;
struct v4l2_subdev *sd; struct v4l2_subdev *sd;
u8 msb_id, lsb_id, msb_rom, lsb_rom;
/* Check if the adapter supports the needed features */ /* Check if the adapter supports the needed features */
if (!i2c_check_functionality(c->adapter, if (!i2c_check_functionality(c->adapter,
...@@ -992,6 +972,26 @@ static int tvp5150_probe(struct i2c_client *c, ...@@ -992,6 +972,26 @@ static int tvp5150_probe(struct i2c_client *c,
v4l_info(c, "chip found @ 0x%02x (%s)\n", v4l_info(c, "chip found @ 0x%02x (%s)\n",
c->addr << 1, c->adapter->name); c->addr << 1, c->adapter->name);
msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
/* ITU-T BT.656.4 timing */
tvp5150_write(sd, TVP5150_REV_SELECT, 0);
} else {
if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
} else {
v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
msb_id, lsb_id);
v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
}
}
core->norm = V4L2_STD_ALL; /* Default is autodetect */ core->norm = V4L2_STD_ALL; /* Default is autodetect */
core->input = TVP5150_COMPOSITE1; core->input = TVP5150_COMPOSITE1;
core->enable = 1; core->enable = 1;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册