提交 0d8614b4 编写于 作者: E Eliad Peller 提交者: Johannes Berg

mac80211: replace SMPS hw flags with wiphy feature bits

Use the new static_smps / dynamic_smps feature bits
instead of mac80211-internal hw flags.
Signed-off-by: NEliad Peller <eliad@wizery.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
上级 f6993174
......@@ -4759,7 +4759,6 @@ int ath10k_mac_register(struct ath10k *ar)
IEEE80211_HW_MFP_CAPABLE |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_SUPPORTS_STATIC_SMPS |
IEEE80211_HW_AP_LINK_PS |
IEEE80211_HW_SPECTRUM_MGMT;
......@@ -4767,8 +4766,10 @@ int ath10k_mac_register(struct ath10k *ar)
* bytes is used for padding/alignment if necessary. */
ar->hw->extra_tx_headroom += sizeof(struct htt_data_tx_desc_frag)*2 + 4;
ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS;
ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;
if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
......
......@@ -5757,9 +5757,8 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length)
IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
if (il->cfg->sku & IL_SKU_N)
hw->flags |=
IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
IEEE80211_HW_SUPPORTS_STATIC_SMPS;
hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS |
NL80211_FEATURE_STATIC_SMPS;
hw->sta_data_size = sizeof(struct il_station_priv);
hw->vif_data_size = sizeof(struct il_vif_priv);
......
......@@ -125,8 +125,8 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv,
*/
if (priv->nvm_data->sku_cap_11n_enable)
hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
IEEE80211_HW_SUPPORTS_STATIC_SMPS;
hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS |
NL80211_FEATURE_STATIC_SMPS;
/*
* Enable 11w if advertised by firmware and software crypto
......
......@@ -301,9 +301,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_TIMING_BEACON_ONLY |
IEEE80211_HW_CONNECTION_MONITOR |
IEEE80211_HW_CHANCTX_STA_CSA |
IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
IEEE80211_HW_SUPPORTS_STATIC_SMPS;
IEEE80211_HW_CHANCTX_STA_CSA;
hw->queues = mvm->first_agg_queue;
hw->offchannel_tx_hw_queue = IWL_MVM_OFFCHANNEL_QUEUE;
......@@ -405,7 +403,9 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN |
NL80211_FEATURE_LOW_PRIORITY_SCAN |
NL80211_FEATURE_P2P_GO_OPPPS;
NL80211_FEATURE_P2P_GO_OPPPS |
NL80211_FEATURE_DYNAMIC_SMPS |
NL80211_FEATURE_STATIC_SMPS;
mvm->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
......
......@@ -2045,8 +2045,6 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
hw->flags = IEEE80211_HW_MFP_CAPABLE |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_STATIC_SMPS |
IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_WANT_MONITOR_VIF |
IEEE80211_HW_QUEUE_CONTROL |
......@@ -2059,8 +2057,10 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
WIPHY_FLAG_AP_UAPSD |
WIPHY_FLAG_HAS_CHANNEL_SWITCH;
hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR;
hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR |
NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE |
NL80211_FEATURE_STATIC_SMPS |
NL80211_FEATURE_DYNAMIC_SMPS;
/* ask mac80211 to reserve space for magic */
hw->vif_data_size = sizeof(struct hwsim_vif_priv);
......
......@@ -1537,16 +1537,6 @@ struct ieee80211_tx_control {
* @IEEE80211_HW_MFP_CAPABLE:
* Hardware supports management frame protection (MFP, IEEE 802.11w).
*
* @IEEE80211_HW_SUPPORTS_STATIC_SMPS:
* Hardware supports static spatial multiplexing powersave,
* ie. can turn off all but one chain even on HT connections
* that should be using more chains.
*
* @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS:
* Hardware supports dynamic spatial multiplexing powersave,
* ie. can turn off all but one chain and then wake the rest
* up as required after, for example, rts/cts handshake.
*
* @IEEE80211_HW_SUPPORTS_UAPSD:
* Hardware supports Unscheduled Automatic Power Save Delivery
* (U-APSD) in managed mode. The mode is configured with
......@@ -1632,8 +1622,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12,
IEEE80211_HW_MFP_CAPABLE = 1<<13,
IEEE80211_HW_WANT_MONITOR_VIF = 1<<14,
IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15,
IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16,
/* free slots */
IEEE80211_HW_SUPPORTS_UAPSD = 1<<17,
IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
IEEE80211_HW_CONNECTION_MONITOR = 1<<19,
......
......@@ -303,11 +303,6 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf,
sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_DYNAMIC_PS\n");
if (local->hw.flags & IEEE80211_HW_MFP_CAPABLE)
sf += scnprintf(buf + sf, mxln - sf, "MFP_CAPABLE\n");
if (local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS)
sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_STATIC_SMPS\n");
if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
sf += scnprintf(buf + sf, mxln - sf,
"SUPPORTS_DYNAMIC_SMPS\n");
if (local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)
sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_UAPSD\n");
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
......
......@@ -226,12 +226,12 @@ static int ieee80211_set_smps(struct ieee80211_sub_if_data *sdata,
struct ieee80211_local *local = sdata->local;
int err;
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS) &&
if (!(local->hw.wiphy->features & NL80211_FEATURE_STATIC_SMPS) &&
smps_mode == IEEE80211_SMPS_STATIC)
return -EINVAL;
/* auto should be dynamic if in PS mode */
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS) &&
if (!(local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS) &&
(smps_mode == IEEE80211_SMPS_DYNAMIC ||
smps_mode == IEEE80211_SMPS_AUTOMATIC))
return -EINVAL;
......
......@@ -3805,7 +3805,7 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
ifmgd->p2p_noa_index = -1;
if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
else
ifmgd->req_smps = IEEE80211_SMPS_OFF;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册