phy: add AT803x driver

This driver add support for wake over lan on AT803x phys.
Signed-off-by: NMatus Ujhelyi <ujhelyi.m@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/phy/Kconfig

@@ -15,6 +15,11 @@ if PHYLIB
 
 comment "MII PHY device drivers"
 
+config AT803X_PHY
+	tristate "Drivers for Atheros AT803X PHYs"
+	---help---
+	  Currently supports the AT8030 and AT8035 model
+
 config AMD_PHY
 	tristate "Drivers for the AMD PHYs"
 	---help---

drivers/net/phy/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_STE10XP)		+= ste10Xp.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
+obj-$(CONFIG_AT803X_PHY)	+= at803x.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
 obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o
 obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o

drivers/net/phy/at803x.c

+/*
+ * drivers/net/phy/at803x.c
+ *
+ * Driver for Atheros 803x PHY
+ *
+ * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#define AT803X_INTR_ENABLE			0x12
+#define AT803X_INTR_STATUS			0x13
+#define AT803X_WOL_ENABLE			0x01
+#define AT803X_DEVICE_ADDR			0x03
+#define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
+#define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
+#define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
+#define AT803X_MMD_ACCESS_CONTROL		0x0D
+#define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
+#define AT803X_FUNC_DATA			0x4003
+
+MODULE_DESCRIPTION("Atheros 803x PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_LICENSE("GPL");
+
+static void at803x_set_wol_mac_addr(struct phy_device *phydev)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	const u8 *mac;
+	unsigned int i, offsets[] = {
+		AT803X_LOC_MAC_ADDR_32_47_OFFSET,
+		AT803X_LOC_MAC_ADDR_16_31_OFFSET,
+		AT803X_LOC_MAC_ADDR_0_15_OFFSET,
+	};
+
+	if (!ndev)
+		return;
+
+	mac = (const u8 *) ndev->dev_addr;
+
+	if (!is_valid_ether_addr(mac))
+		return;
+
+	for (i = 0; i < 3; i++) {
+		phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+				  AT803X_DEVICE_ADDR);
+		phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+				  offsets[i]);
+		phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+				  AT803X_FUNC_DATA);
+		phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+				  mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+	}
+}
+
+static int at803x_config_init(struct phy_device *phydev)
+{
+	int val;
+	u32 features;
+	int status;
+
+	features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI |
+		   SUPPORTED_FIBRE | SUPPORTED_BNC;
+
+	val = phy_read(phydev, MII_BMSR);
+	if (val < 0)
+		return val;
+
+	if (val & BMSR_ANEGCAPABLE)
+		features |= SUPPORTED_Autoneg;
+	if (val & BMSR_100FULL)
+		features |= SUPPORTED_100baseT_Full;
+	if (val & BMSR_100HALF)
+		features |= SUPPORTED_100baseT_Half;
+	if (val & BMSR_10FULL)
+		features |= SUPPORTED_10baseT_Full;
+	if (val & BMSR_10HALF)
+		features |= SUPPORTED_10baseT_Half;
+
+	if (val & BMSR_ESTATEN) {
+		val = phy_read(phydev, MII_ESTATUS);
+		if (val < 0)
+			return val;
+
+		if (val & ESTATUS_1000_TFULL)
+			features |= SUPPORTED_1000baseT_Full;
+		if (val & ESTATUS_1000_THALF)
+			features |= SUPPORTED_1000baseT_Half;
+	}
+
+	phydev->supported = features;
+	phydev->advertising = features;
+
+	/* enable WOL */
+	at803x_set_wol_mac_addr(phydev);
+	status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE);
+	status = phy_read(phydev, AT803X_INTR_STATUS);
+
+	return 0;
+}
+
+/* ATHEROS 8035 */
+static struct phy_driver at8035_driver = {
+	.phy_id		= 0x004dd072,
+	.name		= "Atheros 8035 ethernet",
+	.phy_id_mask	= 0xffffffef,
+	.config_init	= at803x_config_init,
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.driver		= {
+		.owner = THIS_MODULE,
+	},
+};
+
+/* ATHEROS 8030 */
+static struct phy_driver at8030_driver = {
+	.phy_id		= 0x004dd076,
+	.name		= "Atheros 8030 ethernet",
+	.phy_id_mask	= 0xffffffef,
+	.config_init	= at803x_config_init,
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.driver		= {
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init atheros_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&at8035_driver);
+	if (ret)
+		goto err1;
+
+	ret = phy_driver_register(&at8030_driver);
+	if (ret)
+		goto err2;
+
+	return 0;
+
+err2:
+	phy_driver_unregister(&at8035_driver);
+err1:
+	return ret;
+}
+
+static void __exit atheros_exit(void)
+{
+	phy_driver_unregister(&at8035_driver);
+	phy_driver_unregister(&at8030_driver);
+}
+
+module_init(atheros_init);
+module_exit(atheros_exit);
+
+static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+	{ 0x004dd076, 0xffffffef },
+	{ 0x004dd072, 0xffffffef },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, atheros_tbl);