提交 0c6377f8 编写于 作者: G Greg Ungerer 提交者: Linus Torvalds

m68knommu: remove dead timer int pending code

Remove all the dead timer interrupt checking functions for the ColdFire
CPU "timers" hardware that are not used after switching to GENERIC_TIME.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 79d8bfb0
......@@ -109,20 +109,6 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
/***************************************************************************/
int mcf_timerirqpending(int timer)
{
unsigned int imr = 0;
switch (timer) {
case 1: imr = MCFSIM_IMR_TIMER1; break;
case 2: imr = MCFSIM_IMR_TIMER2; break;
default: break;
}
return (mcf_getipr() & imr);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
......
......@@ -108,20 +108,6 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
/***************************************************************************/
int mcf_timerirqpending(int timer)
{
unsigned int imr = 0;
switch (timer) {
case 1: imr = MCFSIM_IMR_TIMER1; break;
case 2: imr = MCFSIM_IMR_TIMER2; break;
default: break;
}
return (mcf_getipr() & imr);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
......
......@@ -105,20 +105,6 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
/***************************************************************************/
int mcf_timerirqpending(int timer)
{
unsigned int imr = 0;
switch (timer) {
case 1: imr = MCFSIM_IMR_TIMER1; break;
case 2: imr = MCFSIM_IMR_TIMER2; break;
default: break;
}
return (mcf_getipr() & imr);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
......
......@@ -123,19 +123,6 @@ void mcf_settimericr(int timer, int level)
/***************************************************************************/
int mcf_timerirqpending(int timer)
{
volatile unsigned long *icrp;
if ((timer >= 1 ) && (timer <= 4)) {
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
return (*icrp & (0x8 << ((4 - timer) * 4)));
}
return 0;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
#if defined (CONFIG_MOD5272)
......
......@@ -119,20 +119,6 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
/***************************************************************************/
int mcf_timerirqpending(int timer)
{
unsigned int imr = 0;
switch (timer) {
case 1: imr = MCFSIM_IMR_TIMER1; break;
case 2: imr = MCFSIM_IMR_TIMER2; break;
default: break;
}
return (mcf_getipr() & imr);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
......
......@@ -116,20 +116,6 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
/***************************************************************************/
int mcf_timerirqpending(int timer)
{
unsigned int imr = 0;
switch (timer) {
case 1: imr = 0x1; break;
case 2: imr = 0x2; break;
default: break;
}
return (mcf_getiprh() & imr);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
......
......@@ -110,20 +110,6 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
/***************************************************************************/
int mcf_timerirqpending(int timer)
{
unsigned int imr = 0;
switch (timer) {
case 1: imr = MCFSIM_IMR_TIMER1; break;
case 2: imr = MCFSIM_IMR_TIMER2; break;
default: break;
}
return (mcf_getipr() & imr);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册