[Blackfin] serial driver: fix bug - cache the bits of the LSR on systems where...

[Blackfin] serial driver: fix bug - cache the bits of the LSR on systems where the LSR is read-to-clear

Cache the bits of the LSR on systems where the LSR is read-to-clear
so that we can safely read the LSR in random places.  this fixes
older parts where break/framing/parity/overflow was not being detected
at all in PIO mode, and this fixes newer parts where
break/framing/parity/overflow was being reported all the time
without being cleared.
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

drivers/serial/bfin_5xx.c

@@ -216,8 +216,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 	struct pt_regs *regs = get_irq_regs();
 #endif
 
- 	ch = UART_GET_CHAR(uart);
 	status = UART_GET_LSR(uart);
+	UART_CLEAR_LSR(uart);
+
+ 	ch = UART_GET_CHAR(uart);
  	uart->port.icount.rx++;
 
 #ifdef CONFIG_KGDB_UART
@@ -335,7 +337,7 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
 	struct bfin_serial_port *uart = dev_id;
 
 	spin_lock(&uart->port.lock);
-	while ((UART_GET_IER(uart) & ERBFI) && (UART_GET_LSR(uart) & DR))
+	while (UART_GET_LSR(uart) & DR)
 		bfin_serial_rx_chars(uart);
 	spin_unlock(&uart->port.lock);
 
@@ -347,7 +349,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 	struct bfin_serial_port *uart = dev_id;
 
 	spin_lock(&uart->port.lock);
-	if ((UART_GET_IER(uart) & ETBEI) && (UART_GET_LSR(uart) & THRE))
+	if (UART_GET_LSR(uart) & THRE)
 		bfin_serial_tx_chars(uart);
 	spin_unlock(&uart->port.lock);
 
@@ -428,6 +430,8 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 	int i, flg, status;
 
 	status = UART_GET_LSR(uart);
+	UART_CLEAR_LSR(uart);
+
 	uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);;
 
 	if (status & BI) {

include/asm-blackfin/mach-bf527/bfin_serial_5xx.h

@@ -23,7 +23,6 @@
 #define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_THR), v)
@@ -58,6 +57,7 @@
 struct bfin_serial_port {
 	struct uart_port port;
 	unsigned int old_status;
+	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int tx_done;
 	int tx_count;
@@ -76,6 +76,23 @@ struct bfin_serial_port {
 #endif
 };
 
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+	uart->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+	uart->lsr = 0;
+	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
 struct bfin_serial_res {
 	unsigned long uart_base_addr;

include/asm-blackfin/mach-bf533/bfin_serial_5xx.h

@@ -23,7 +23,6 @@
 #define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
@@ -46,6 +45,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int			tx_done;
 	int			tx_count;
@@ -64,6 +64,23 @@ struct bfin_serial_port {
 #endif
 };
 
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+	uart->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+	uart->lsr = 0;
+	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;

include/asm-blackfin/mach-bf537/bfin_serial_5xx.h

@@ -23,7 +23,6 @@
 #define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
@@ -58,6 +57,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int			tx_done;
 	int			tx_count;
@@ -76,6 +76,23 @@ struct bfin_serial_port {
 #endif
 };
 
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+	uart->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+	uart->lsr = 0;
+	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;

include/asm-blackfin/mach-bf548/bfin_serial_5xx.h

@@ -32,6 +32,7 @@
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
 #define UART_PUT_LSR(uart,v)	bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_CLEAR_LSR(uart)    bfin_write16(((uart)->port.membase + OFFSET_LSR), -1)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
 
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)

include/asm-blackfin/mach-bf561/bfin_serial_5xx.h

@@ -23,7 +23,6 @@
 #define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
@@ -46,6 +45,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int			tx_done;
 	int			tx_count;
@@ -64,6 +64,23 @@ struct bfin_serial_port {
 #endif
 };
 
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+	uart->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+	uart->lsr = 0;
+	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;