Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 0b381a28 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers 

Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells:
 "The patches contained herein do the following:

 (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI.  I checked
     this with Paul Mackerras before I created the patch and he suggested some
     extra bits to unexport.

 (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace
     applicable, and remove from the UAPI that part of linux/fs.h that was the
     reason for linux/blk_types.h being exported in the first place.  I
     discussed this with Jens Axboe before creating the patch.

 (3) The big patch of the series to disintegrate include/linux/*.h as a unit.
     This could be split up, though there would be collisions in moving stuff
     between the two Kbuild files when the parts are merged as that file is
     sorted alphabetically rather than being grouped by subsystem.

     Of this set of headers, 17 files have changed in the UAPI exported region
     since the 4th and only 8 since the 9th so there isn't much change in this
     area - as one might expect.

     It should be pretty obvious and straightforward if it does come to fixing
     up: stuff in __KERNEL__ guards stays where it is and stuff outside moves
     to the same file in the include/uapi/linux/ directory.

     If a new file appears then things get a bit more complicated as the
     "headers +=" line has to move to include/uapi/linux/Kbuild.  Only one new
     file has appeared since the 9th and I judge this type of event relatively
     unlikely.

 (4) A patch to disintegrate include/linux/byteorder/*.h as a unit.

  Signed-off-by: David Howells <dhowells@redhat.com>"

* tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/linux/byteorder
  UAPI: (Scripted) Disintegrate include/linux
  UAPI: Unexport linux/blk_types.h
  UAPI: Unexport part of linux/ppp-comp.h
上级 034b5eeb 5921e6f8
展开全部 隐藏空白更改
内联 并排
Showing with 32928 addition and 30367 deletion
include/linux/Kbuild
浏览文件 @ 0b381a28
......@@ -22,390 +22,10 @@ header-y += wimax/
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),)
header-y += a.out.h
endif
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),)
header-y += kvm.h
endif
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),)
header-y += kvm_para.h
endif
header-y += acct.h
header-y += adb.h
header-y += adfs_fs.h
header-y += affs_hardblocks.h
header-y += agpgart.h
header-y += aio_abi.h
header-y += apm_bios.h
header-y += arcfb.h
header-y += atalk.h
header-y += atm.h
header-y += atm_eni.h
header-y += atm_he.h
header-y += atm_idt77105.h
header-y += atm_nicstar.h
header-y += atm_tcp.h
header-y += atm_zatm.h
header-y += atmapi.h
header-y += atmarp.h
header-y += atmbr2684.h
header-y += atmclip.h
header-y += atmdev.h
header-y += atmioc.h
header-y += atmlec.h
header-y += atmmpc.h
header-y += atmppp.h
header-y += atmsap.h
header-y += atmsvc.h
header-y += audit.h
header-y += auto_fs.h
header-y += auto_fs4.h
header-y += auxvec.h
header-y += ax25.h
header-y += b1lli.h
header-y += baycom.h
header-y += bfs_fs.h
header-y += binfmts.h
header-y += blk_types.h
header-y += blkpg.h
header-y += blktrace_api.h
header-y += bpqether.h
header-y += bsg.h
header-y += can.h
header-y += capability.h
header-y += capi.h
header-y += cciss_defs.h
header-y += cciss_ioctl.h
header-y += cdrom.h
header-y += cgroupstats.h
header-y += chio.h
header-y += cm4000_cs.h
header-y += cn_proc.h
header-y += coda.h
header-y += coda_psdev.h
header-y += coff.h
header-y += connector.h
header-y += const.h
header-y += cramfs_fs.h
header-y += cuda.h
header-y += cyclades.h
header-y += cycx_cfm.h
header-y += dcbnl.h
header-y += dccp.h
header-y += dlm.h
header-y += dlm_device.h
header-y += dlm_netlink.h
header-y += dlm_plock.h
header-y += dlmconstants.h
header-y += dm-ioctl.h
header-y += dm-log-userspace.h
header-y += dn.h
header-y += dqblk_xfs.h
header-y += edd.h
header-y += efs_fs_sb.h
header-y += elf-em.h
header-y += elf-fdpic.h
header-y += elf.h
header-y += elfcore.h
header-y += errno.h
header-y += errqueue.h
header-y += ethtool.h
header-y += eventpoll.h
header-y += fadvise.h
header-y += falloc.h
header-y += fanotify.h
header-y += fb.h
header-y += fcntl.h
header-y += fd.h
header-y += fdreg.h
header-y += fib_rules.h
header-y += fiemap.h
header-y += filter.h
header-y += firewire-cdev.h
header-y += firewire-constants.h
header-y += flat.h
header-y += fs.h
header-y += fsl_hypervisor.h
header-y += fuse.h
header-y += futex.h
header-y += gameport.h
header-y += gen_stats.h
header-y += genetlink.h
header-y += gfs2_ondisk.h
header-y += gigaset_dev.h
header-y += hdlc.h
header-y += hdlcdrv.h
header-y += hdreg.h
header-y += hid.h
header-y += hiddev.h
header-y += hidraw.h
header-y += hpet.h
header-y += hysdn_if.h
header-y += i2c-dev.h
header-y += i2c.h
header-y += i2o-dev.h
header-y += i8k.h
header-y += icmp.h
header-y += icmpv6.h
header-y += if.h
header-y += if_addr.h
header-y += if_addrlabel.h
header-y += if_alg.h
header-y += if_arcnet.h
header-y += if_arp.h
header-y += if_bonding.h
header-y += if_bridge.h
header-y += if_cablemodem.h
header-y += if_eql.h
header-y += if_ether.h
header-y += if_fc.h
header-y += if_fddi.h
header-y += if_frad.h
header-y += if_hippi.h
header-y += if_infiniband.h
header-y += if_link.h
header-y += if_ltalk.h
header-y += if_packet.h
header-y += if_phonet.h
header-y += if_plip.h
header-y += if_ppp.h
header-y += if_pppol2tp.h
header-y += if_pppox.h
header-y += if_slip.h
header-y += if_team.h
header-y += if_tun.h
header-y += if_tunnel.h
header-y += if_vlan.h
header-y += if_x25.h
header-y += igmp.h
header-y += in.h
header-y += in6.h
header-y += in_route.h
header-y += sock_diag.h
header-y += inet_diag.h
header-y += unix_diag.h
header-y += packet_diag.h
header-y += inotify.h
header-y += input.h
header-y += ioctl.h
header-y += ip.h
header-y += ip6_tunnel.h
header-y += ip_vs.h
header-y += ipc.h
header-y += ipmi.h
header-y += ipmi_msgdefs.h
header-y += ipsec.h
header-y += ipv6.h
header-y += ipv6_route.h
header-y += ipx.h
header-y += irda.h
header-y += irqnr.h
header-y += isdn.h
header-y += isdn_divertif.h
header-y += isdn_ppp.h
header-y += isdnif.h
header-y += iso_fs.h
header-y += ivtv.h
header-y += ivtvfb.h
header-y += ixjuser.h
header-y += jffs2.h
header-y += joystick.h
header-y += kd.h
header-y += kdev_t.h
header-y += kernel.h
header-y += kernelcapi.h
header-y += kernel-page-flags.h
header-y += kexec.h
header-y += keyboard.h
header-y += keyctl.h
header-y += l2tp.h
header-y += limits.h
header-y += llc.h
header-y += loop.h
header-y += lp.h
header-y += magic.h
header-y += major.h
header-y += map_to_7segment.h
header-y += matroxfb.h
header-y += mdio.h
header-y += media.h
header-y += mei.h
header-y += mempolicy.h
header-y += meye.h
header-y += mii.h
header-y += minix_fs.h
header-y += mman.h
header-y += mmtimer.h
header-y += mqueue.h
header-y += mroute.h
header-y += mroute6.h
header-y += msdos_fs.h
header-y += msg.h
header-y += mtio.h
header-y += n_r3964.h
header-y += nbd.h
header-y += ncp.h
header-y += ncp_fs.h
header-y += ncp_mount.h
header-y += ncp_no.h
header-y += neighbour.h
header-y += net.h
header-y += net_dropmon.h
header-y += net_tstamp.h
header-y += netdevice.h
header-y += netfilter.h
header-y += netfilter_arp.h
header-y += netfilter_bridge.h
header-y += netfilter_decnet.h
header-y += netfilter_ipv4.h
header-y += netfilter_ipv6.h
header-y += netlink.h
header-y += netrom.h
header-y += nfc.h
header-y += nfs.h
header-y += nfs2.h
header-y += nfs3.h
header-y += nfs4.h
header-y += nfs4_mount.h
header-y += nfs_fs.h
header-y += nfs_idmap.h
header-y += nfs_mount.h
header-y += nfsacl.h
header-y += nl80211.h
header-y += nubus.h
header-y += nvram.h
header-y += omap3isp.h
header-y += omapfb.h
header-y += oom.h
header-y += param.h
header-y += parport.h
header-y += patchkey.h
header-y += pci.h
header-y += pci_regs.h
header-y += perf_event.h
header-y += personality.h
header-y += pfkeyv2.h
header-y += pg.h
header-y += phantom.h
header-y += phonet.h
header-y += pkt_cls.h
header-y += pkt_sched.h
header-y += pktcdvd.h
header-y += pmu.h
header-y += poll.h
header-y += posix_types.h
header-y += ppdev.h
header-y += ppp-comp.h
header-y += ppp-ioctl.h
header-y += ppp_defs.h
header-y += pps.h
header-y += prctl.h
header-y += ptp_clock.h
header-y += ptrace.h
header-y += qnx4_fs.h
header-y += qnxtypes.h
header-y += quota.h
header-y += radeonfb.h
header-y += random.h
header-y += raw.h
header-y += rds.h
header-y += reboot.h
header-y += reiserfs_fs.h
header-y += reiserfs_xattr.h
header-y += resource.h
header-y += rfkill.h
header-y += romfs_fs.h
header-y += rose.h
header-y += route.h
header-y += rtc.h
header-y += rtnetlink.h
header-y += scc.h
header-y += sched.h
header-y += screen_info.h
header-y += sdla.h
header-y += seccomp.h
header-y += securebits.h
header-y += selinux_netlink.h
header-y += sem.h
header-y += serial.h
header-y += serial_core.h
header-y += serial_reg.h
header-y += serio.h
header-y += shm.h
header-y += signal.h
header-y += signalfd.h
header-y += snmp.h
header-y += socket.h
header-y += sockios.h
header-y += som.h
header-y += sonet.h
header-y += sonypi.h
header-y += sound.h
header-y += soundcard.h
header-y += stat.h
header-y += stddef.h
header-y += string.h
header-y += suspend_ioctls.h
header-y += swab.h
header-y += synclink.h
header-y += sysctl.h
header-y += sysinfo.h
header-y += taskstats.h
header-y += tcp.h
header-y += tcp_metrics.h
header-y += telephony.h
header-y += termios.h
header-y += time.h
header-y += times.h
header-y += timex.h
header-y += tiocl.h
header-y += tipc.h
header-y += tipc_config.h
header-y += toshiba.h
header-y += tty.h
header-y += tty_flags.h
header-y += types.h
header-y += udf_fs_i.h
header-y += udp.h
header-y += uhid.h
header-y += uinput.h
header-y += uio.h
header-y += ultrasound.h
header-y += un.h
header-y += unistd.h
header-y += usbdevice_fs.h
header-y += utime.h
header-y += utsname.h
header-y += uuid.h
header-y += uvcvideo.h
header-y += v4l2-common.h
header-y += v4l2-controls.h
header-y += v4l2-dv-timings.h
header-y += v4l2-mediabus.h
header-y += v4l2-subdev.h
header-y += veth.h
header-y += vfio.h
header-y += vhost.h
header-y += videodev2.h
header-y += virtio_9p.h
header-y += virtio_balloon.h
header-y += virtio_blk.h
header-y += virtio_config.h
header-y += virtio_console.h
header-y += virtio_ids.h
header-y += virtio_net.h
header-y += virtio_pci.h
header-y += virtio_ring.h
header-y += virtio_rng.h
header-y += vt.h
header-y += wait.h
header-y += wanrouter.h
header-y += watchdog.h
header-y += wimax.h
header-y += wireless.h
header-y += x25.h
header-y += xattr.h
header-y += xfrm.h
include/linux/a.out.h
浏览文件 @ 0b381a28
#ifndef __A_OUT_GNU_H__
#define __A_OUT_GNU_H__
#define __GNU_EXEC_MACROS__
#ifndef __STRUCT_EXEC_OVERRIDE__
#include <asm/a.out.h>
#endif /* __STRUCT_EXEC_OVERRIDE__ */
#include <uapi/linux/a.out.h>
#ifndef __ASSEMBLY__
/* these go in the N_MACHTYPE field */
enum machine_type {
#if defined (M_OLDSUN2)
M__OLDSUN2 = M_OLDSUN2,
#else
M_OLDSUN2 = 0,
#endif
#if defined (M_68010)
M__68010 = M_68010,
#else
M_68010 = 1,
#endif
#if defined (M_68020)
M__68020 = M_68020,
#else
M_68020 = 2,
#endif
#if defined (M_SPARC)
M__SPARC = M_SPARC,
#else
M_SPARC = 3,
#endif
/* skip a bunch so we don't run into any of sun's numbers */
M_386 = 100,
M_MIPS1 = 151, /* MIPS R3000/R3000 binary */
M_MIPS2 = 152 /* MIPS R6000/R4000 binary */
};
#if !defined (N_MAGIC)
#define N_MAGIC(exec) ((exec).a_info & 0xffff)
#endif
#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
#define N_SET_INFO(exec, magic, type, flags) \
((exec).a_info = ((magic) & 0xffff) \
| (((int)(type) & 0xff) << 16) \
| (((flags) & 0xff) << 24))
#define N_SET_MAGIC(exec, magic) \
((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
#define N_SET_MACHTYPE(exec, machtype) \
((exec).a_info = \
((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
#define N_SET_FLAGS(exec, flags) \
((exec).a_info = \
((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
/* Code indicating object file or impure executable. */
#define OMAGIC 0407
/* Code indicating pure executable. */
#define NMAGIC 0410
/* Code indicating demand-paged executable. */
#define ZMAGIC 0413
/* This indicates a demand-paged executable with the header in the text.
The first page is unmapped to help trap NULL pointer references */
#define QMAGIC 0314
/* Code indicating core file. */
#define CMAGIC 0421
#if !defined (N_BADMAG)
#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \
&& N_MAGIC(x) != NMAGIC \
&& N_MAGIC(x) != ZMAGIC \
&& N_MAGIC(x) != QMAGIC)
#endif
#define _N_HDROFF(x) (1024 - sizeof (struct exec))
#if !defined (N_TXTOFF)
#define N_TXTOFF(x) \
(N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
(N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
#endif
#if !defined (N_DATOFF)
#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
#endif
#if !defined (N_TRELOFF)
#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
#endif
#if !defined (N_DRELOFF)
#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
#endif
#if !defined (N_SYMOFF)
#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
#endif
#if !defined (N_STROFF)
#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
#endif
/* Address of text segment in memory after it is loaded. */
#if !defined (N_TXTADDR)
#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
#endif
/* Address of data segment in memory after it is loaded.
Note that it is up to you to define SEGMENT_SIZE
on machines not listed here. */
#if defined(vax) || defined(hp300) || defined(pyr)
#define SEGMENT_SIZE page_size
#endif
#ifdef sony
#define SEGMENT_SIZE 0x2000
#endif /* Sony. */
#ifdef is68k
#define SEGMENT_SIZE 0x20000
#endif
#if defined(m68k) && defined(PORTAR)
#define PAGE_SIZE 0x400
#define SEGMENT_SIZE PAGE_SIZE
#endif
#ifdef linux
#ifdef __KERNEL__
#include <asm/page.h>
#else
#include <unistd.h>
#endif
#if defined(__i386__) || defined(__mc68000__)
#define SEGMENT_SIZE 1024
#else
#ifndef SEGMENT_SIZE
#ifdef __KERNEL__
#define SEGMENT_SIZE PAGE_SIZE
#else
#define SEGMENT_SIZE getpagesize()
#endif
#endif
#endif
#endif
#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
#ifndef N_DATADDR
#define N_DATADDR(x) \
(N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
: (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
#endif
/* Address of bss segment in memory after it is loaded. */
#if !defined (N_BSSADDR)
#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
#endif
#if !defined (N_NLIST_DECLARED)
struct nlist {
union {
char *n_name;
struct nlist *n_next;
long n_strx;
} n_un;
unsigned char n_type;
char n_other;
short n_desc;
unsigned long n_value;
};
#endif /* no N_NLIST_DECLARED. */
#if !defined (N_UNDF)
#define N_UNDF 0
#endif
#if !defined (N_ABS)
#define N_ABS 2
#endif
#if !defined (N_TEXT)
#define N_TEXT 4
#endif
#if !defined (N_DATA)
#define N_DATA 6
#endif
#if !defined (N_BSS)
#define N_BSS 8
#endif
#if !defined (N_FN)
#define N_FN 15
#endif
#if !defined (N_EXT)
#define N_EXT 1
#endif
#if !defined (N_TYPE)
#define N_TYPE 036
#endif
#if !defined (N_STAB)
#define N_STAB 0340
#endif
/* The following type indicates the definition of a symbol as being
an indirect reference to another symbol. The other symbol
appears as an undefined reference, immediately following this symbol.
Indirection is asymmetrical. The other symbol's value will be used
to satisfy requests for the indirect symbol, but not vice versa.
If the other symbol does not have a definition, libraries will
be searched to find a definition. */
#define N_INDR 0xa
/* The following symbols refer to set elements.
All the N_SET[ATDB] symbols with the same name form one set.
Space is allocated for the set in the text section, and each set
element's value is stored into one word of the space.
The first word of the space is the length of the set (number of elements).
The address of the set is made into an N_SETV symbol
whose name is the same as the name of the set.
This symbol acts like a N_DATA global symbol
in that it can satisfy undefined external references. */
/* These appear as input to LD, in a .o file. */
#define N_SETA 0x14 /* Absolute set element symbol */
#define N_SETT 0x16 /* Text set element symbol */
#define N_SETD 0x18 /* Data set element symbol */
#define N_SETB 0x1A /* Bss set element symbol */
/* This is output from LD. */
#define N_SETV 0x1C /* Pointer to set vector in data area. */
#if !defined (N_RELOCATION_INFO_DECLARED)
/* This structure describes a single relocation to be performed.
The text-relocation section of the file is a vector of these structures,
all of which apply to the text section.
Likewise, the data-relocation section applies to the data section. */
struct relocation_info
{
/* Address (within segment) to be relocated. */
int r_address;
/* The meaning of r_symbolnum depends on r_extern. */
unsigned int r_symbolnum:24;
/* Nonzero means value is a pc-relative offset
and it should be relocated for changes in its own address
as well as for changes in the symbol or section specified. */
unsigned int r_pcrel:1;
/* Length (as exponent of 2) of the field to be relocated.
Thus, a value of 2 indicates 1<<2 bytes. */
unsigned int r_length:2;
/* 1 => relocate with value of symbol.
r_symbolnum is the index of the symbol
in file's the symbol table.
0 => relocate with the address of a segment.
r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
(the N_EXT bit may be set also, but signifies nothing). */
unsigned int r_extern:1;
/* Four bits that aren't used, but when writing an object file
it is desirable to clear them. */
#ifdef NS32K
unsigned r_bsr:1;
unsigned r_disp:1;
unsigned r_pad:2;
#else
unsigned int r_pad:4;
#endif
};
#endif /* no N_RELOCATION_INFO_DECLARED. */
#endif /*__ASSEMBLY__ */
#endif /* __A_OUT_GNU_H__ */
include/linux/acct.h
浏览文件 @ 0b381a28
......@@ -11,109 +11,11 @@
* Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
*
*/
#ifndef _LINUX_ACCT_H
#define _LINUX_ACCT_H
#include <linux/types.h>
#include <asm/param.h>
#include <asm/byteorder.h>
/*
* comp_t is a 16-bit "floating" point number with a 3-bit base 8
* exponent and a 13-bit fraction.
* comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
* (leading 1 not stored).
* See linux/kernel/acct.c for the specific encoding systems used.
*/
typedef __u16 comp_t;
typedef __u32 comp2_t;
/*
* accounting file record
*
* This structure contains all of the information written out to the
* process accounting file whenever a process exits.
*/
#include <uapi/linux/acct.h>
#define ACCT_COMM 16
struct acct
{
char ac_flag; /* Flags */
char ac_version; /* Always set to ACCT_VERSION */
/* for binary compatibility back until 2.0 */
__u16 ac_uid16; /* LSB of Real User ID */
__u16 ac_gid16; /* LSB of Real Group ID */
__u16 ac_tty; /* Control Terminal */
__u32 ac_btime; /* Process Creation Time */
comp_t ac_utime; /* User Time */
comp_t ac_stime; /* System Time */
comp_t ac_etime; /* Elapsed Time */
comp_t ac_mem; /* Average Memory Usage */
comp_t ac_io; /* Chars Transferred */
comp_t ac_rw; /* Blocks Read or Written */
comp_t ac_minflt; /* Minor Pagefaults */
comp_t ac_majflt; /* Major Pagefaults */
comp_t ac_swaps; /* Number of Swaps */
/* m68k had no padding here. */
#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
__u16 ac_ahz; /* AHZ */
#endif
__u32 ac_exitcode; /* Exitcode */
char ac_comm[ACCT_COMM + 1]; /* Command Name */
__u8 ac_etime_hi; /* Elapsed Time MSB */
__u16 ac_etime_lo; /* Elapsed Time LSB */
__u32 ac_uid; /* Real User ID */
__u32 ac_gid; /* Real Group ID */
};
struct acct_v3
{
char ac_flag; /* Flags */
char ac_version; /* Always set to ACCT_VERSION */
__u16 ac_tty; /* Control Terminal */
__u32 ac_exitcode; /* Exitcode */
__u32 ac_uid; /* Real User ID */
__u32 ac_gid; /* Real Group ID */
__u32 ac_pid; /* Process ID */
__u32 ac_ppid; /* Parent Process ID */
__u32 ac_btime; /* Process Creation Time */
#ifdef __KERNEL__
__u32 ac_etime; /* Elapsed Time */
#else
float ac_etime; /* Elapsed Time */
#endif
comp_t ac_utime; /* User Time */
comp_t ac_stime; /* System Time */
comp_t ac_mem; /* Average Memory Usage */
comp_t ac_io; /* Chars Transferred */
comp_t ac_rw; /* Blocks Read or Written */
comp_t ac_minflt; /* Minor Pagefaults */
comp_t ac_majflt; /* Major Pagefaults */
comp_t ac_swaps; /* Number of Swaps */
char ac_comm[ACCT_COMM]; /* Command Name */
};
/*
* accounting flags
*/
/* bit set when the process ... */
#define AFORK 0x01 /* ... executed fork, but did not exec */
#define ASU 0x02 /* ... used super-user privileges */
#define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */
#define ACORE 0x08 /* ... dumped core */
#define AXSIG 0x10 /* ... was killed by a signal */
#ifdef __BIG_ENDIAN
#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */
#else
#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */
#endif
#ifdef __KERNEL__
#ifdef CONFIG_BSD_PROCESS_ACCT
......@@ -163,12 +65,6 @@ typedef struct acct_v3 acct_t;
typedef struct acct acct_t;
#endif
#else
#define ACCT_VERSION 2
#define AHZ (HZ)
#endif /* __KERNEL */
#ifdef __KERNEL__
#include <linux/jiffies.h>
/*
* Yet another set of HZ to *HZ helper functions.
......@@ -210,6 +106,4 @@ static inline u64 nsec_to_AHZ(u64 x)
return x;
}
#endif /* __KERNEL */
#endif /* _LINUX_ACCT_H */
include/linux/adb.h
浏览文件 @ 0b381a28
......@@ -4,43 +4,8 @@
#ifndef __ADB_H
#define __ADB_H
/* ADB commands */
#define ADB_BUSRESET 0
#define ADB_FLUSH(id) (0x01 | ((id) << 4))
#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4))
#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4))
#include <uapi/linux/adb.h>
/* ADB default device IDs (upper 4 bits of ADB command byte) */
#define ADB_DONGLE 1 /* "software execution control" devices */
#define ADB_KEYBOARD 2
#define ADB_MOUSE 3
#define ADB_TABLET 4
#define ADB_MODEM 5
#define ADB_MISC 7 /* maybe a monitor */
#define ADB_RET_OK 0
#define ADB_RET_TIMEOUT 3
/* The kind of ADB request. The controller may emulate some
or all of those CUDA/PMU packet kinds */
#define ADB_PACKET 0
#define CUDA_PACKET 1
#define ERROR_PACKET 2
#define TIMER_PACKET 3
#define POWER_PACKET 4
#define MACIIC_PACKET 5
#define PMU_PACKET 6
#define ADB_QUERY 7
/* ADB queries */
/* ADB_QUERY_GETDEVINFO
* Query ADB slot for device presence
* data[2] = id, rep[0] = orig addr, rep[1] = handler_id
*/
#define ADB_QUERY_GETDEVINFO 1
#ifdef __KERNEL__
struct adb_request {
unsigned char data[32];
......@@ -98,6 +63,4 @@ int adb_reset_bus(void);
int adb_try_handler_change(int address, int new_id);
int adb_get_infos(int address, int *original_address, int *handler_id);
#endif /* __KERNEL__ */
#endif /* __ADB_H */
include/linux/adfs_fs.h
浏览文件 @ 0b381a28
#ifndef _ADFS_FS_H
#define _ADFS_FS_H
#include <linux/types.h>
#include <linux/magic.h>
#include <uapi/linux/adfs_fs.h>
/*
* Disc Record at disc address 0xc00
*/
struct adfs_discrecord {
__u8 log2secsize;
__u8 secspertrack;
__u8 heads;
__u8 density;
__u8 idlen;
__u8 log2bpmb;
__u8 skew;
__u8 bootoption;
__u8 lowsector;
__u8 nzones;
__le16 zone_spare;
__le32 root;
__le32 disc_size;
__le16 disc_id;
__u8 disc_name[10];
__le32 disc_type;
__le32 disc_size_high;
__u8 log2sharesize:4;
__u8 unused40:4;
__u8 big_flag:1;
__u8 unused41:1;
__u8 nzones_high;
__le32 format_version;
__le32 root_size;
__u8 unused52[60 - 52];
};
#define ADFS_DISCRECORD (0xc00)
#define ADFS_DR_OFFSET (0x1c0)
#define ADFS_DR_SIZE 60
#define ADFS_DR_SIZE_BITS (ADFS_DR_SIZE << 3)
#ifdef __KERNEL__
/*
* Calculate the boot block checksum on an ADFS drive. Note that this will
* appear to be correct if the sector contains all zeros, so also check that
......@@ -59,5 +21,3 @@ static inline int adfs_checkbblk(unsigned char *ptr)
return (result & 0xff) != ptr[511];
}
#endif
#endif
include/linux/agpgart.h
浏览文件 @ 0b381a28
......@@ -23,94 +23,12 @@
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#ifndef _AGP_H
#define _AGP_H 1
#define AGPIOC_BASE 'A'
#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, struct agp_info*)
#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1)
#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2)
#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, struct agp_setup*)
#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, struct agp_region*)
#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, struct agp_region*)
#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, struct agp_bind*)
#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
#define AGP_DEVICE "/dev/agpgart"
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#ifndef __KERNEL__
#include <linux/types.h>
struct agp_version {
__u16 major;
__u16 minor;
};
typedef struct _agp_info {
struct agp_version version; /* version of the driver */
__u32 bridge_id; /* bridge vendor/device */
__u32 agp_mode; /* mode info of bridge */
unsigned long aper_base;/* base of aperture */
size_t aper_size; /* size of aperture */
size_t pg_total; /* max pages (swap + system) */
size_t pg_system; /* max pages (system) */
size_t pg_used; /* current pages used */
} agp_info;
typedef struct _agp_setup {
__u32 agp_mode; /* mode info of bridge */
} agp_setup;
/*
* The "prot" down below needs still a "sleep" flag somehow ...
*/
typedef struct _agp_segment {
__kernel_off_t pg_start; /* starting page to populate */
__kernel_size_t pg_count; /* number of pages */
int prot; /* prot flags for mmap */
} agp_segment;
typedef struct _agp_region {
__kernel_pid_t pid; /* pid of process */
__kernel_size_t seg_count; /* number of segments */
struct _agp_segment *seg_list;
} agp_region;
typedef struct _agp_allocate {
int key; /* tag of allocation */
__kernel_size_t pg_count;/* number of pages */
__u32 type; /* 0 == normal, other devspec */
__u32 physical; /* device specific (some devices
* need a phys address of the
* actual page behind the gatt
* table) */
} agp_allocate;
typedef struct _agp_bind {
int key; /* tag of allocation */
__kernel_off_t pg_start;/* starting page to populate */
} agp_bind;
typedef struct _agp_unbind {
int key; /* tag of allocation */
__u32 priority; /* priority for paging out */
} agp_unbind;
#else /* __KERNEL__ */
#include <linux/mutex.h>
#include <linux/agp_backend.h>
#include <uapi/linux/agpgart.h>
#define AGPGART_MINOR 175
......@@ -209,6 +127,4 @@ struct agp_front_data {
bool backend_acquired;
};
#endif /* __KERNEL__ */
#endif /* _AGP_H */
include/linux/apm_bios.h
浏览文件 @ 0b381a28
#ifndef _LINUX_APM_H
#define _LINUX_APM_H
/*
* Include file for the interface to an APM BIOS
* Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
......@@ -15,25 +12,11 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#ifndef _LINUX_APM_H
#define _LINUX_APM_H
#include <linux/types.h>
typedef unsigned short apm_event_t;
typedef unsigned short apm_eventinfo_t;
struct apm_bios_info {
__u16 version;
__u16 cseg;
__u32 offset;
__u16 cseg_16;
__u16 dseg;
__u16 flags;
__u16 cseg_len;
__u16 cseg_16_len;
__u16 dseg_len;
};
#include <uapi/linux/apm_bios.h>
#ifdef __KERNEL__
#define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8)
#define APM_CS_16 (APM_CS + 8)
......@@ -110,111 +93,9 @@ struct apm_info {
*/
extern struct apm_info apm_info;
#endif /* __KERNEL__ */
/*
* Power states
*/
#define APM_STATE_READY 0x0000
#define APM_STATE_STANDBY 0x0001
#define APM_STATE_SUSPEND 0x0002
#define APM_STATE_OFF 0x0003
#define APM_STATE_BUSY 0x0004
#define APM_STATE_REJECT 0x0005
#define APM_STATE_OEM_SYS 0x0020
#define APM_STATE_OEM_DEV 0x0040
#define APM_STATE_DISABLE 0x0000
#define APM_STATE_ENABLE 0x0001
#define APM_STATE_DISENGAGE 0x0000
#define APM_STATE_ENGAGE 0x0001
/*
* Events (results of Get PM Event)
*/
#define APM_SYS_STANDBY 0x0001
#define APM_SYS_SUSPEND 0x0002
#define APM_NORMAL_RESUME 0x0003
#define APM_CRITICAL_RESUME 0x0004
#define APM_LOW_BATTERY 0x0005
#define APM_POWER_STATUS_CHANGE 0x0006
#define APM_UPDATE_TIME 0x0007
#define APM_CRITICAL_SUSPEND 0x0008
#define APM_USER_STANDBY 0x0009
#define APM_USER_SUSPEND 0x000a
#define APM_STANDBY_RESUME 0x000b
#define APM_CAPABILITY_CHANGE 0x000c
/*
* Error codes
*/
#define APM_SUCCESS 0x00
#define APM_DISABLED 0x01
#define APM_CONNECTED 0x02
#define APM_NOT_CONNECTED 0x03
#define APM_16_CONNECTED 0x05
#define APM_16_UNSUPPORTED 0x06
#define APM_32_CONNECTED 0x07
#define APM_32_UNSUPPORTED 0x08
#define APM_BAD_DEVICE 0x09
#define APM_BAD_PARAM 0x0a
#define APM_NOT_ENGAGED 0x0b
#define APM_BAD_FUNCTION 0x0c
#define APM_RESUME_DISABLED 0x0d
#define APM_NO_ERROR 0x53
#define APM_BAD_STATE 0x60
#define APM_NO_EVENTS 0x80
#define APM_NOT_PRESENT 0x86
/*
* APM Device IDs
*/
#define APM_DEVICE_BIOS 0x0000
#define APM_DEVICE_ALL 0x0001
#define APM_DEVICE_DISPLAY 0x0100
#define APM_DEVICE_STORAGE 0x0200
#define APM_DEVICE_PARALLEL 0x0300
#define APM_DEVICE_SERIAL 0x0400
#define APM_DEVICE_NETWORK 0x0500
#define APM_DEVICE_PCMCIA 0x0600
#define APM_DEVICE_BATTERY 0x8000
#define APM_DEVICE_OEM 0xe000
#define APM_DEVICE_OLD_ALL 0xffff
#define APM_DEVICE_CLASS 0x00ff
#define APM_DEVICE_MASK 0xff00
#ifdef __KERNEL__
/*
* This is the "All Devices" ID communicated to the BIOS
*/
#define APM_DEVICE_BALL ((apm_info.connection_version > 0x0100) ? \
APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
#endif
/*
* Battery status
*/
#define APM_MAX_BATTERIES 2
/*
* APM defined capability bit flags
*/
#define APM_CAP_GLOBAL_STANDBY 0x0001
#define APM_CAP_GLOBAL_SUSPEND 0x0002
#define APM_CAP_RESUME_STANDBY_TIMER 0x0004 /* Timer resume from standby */
#define APM_CAP_RESUME_SUSPEND_TIMER 0x0008 /* Timer resume from suspend */
#define APM_CAP_RESUME_STANDBY_RING 0x0010 /* Resume on Ring fr standby */
#define APM_CAP_RESUME_SUSPEND_RING 0x0020 /* Resume on Ring fr suspend */
#define APM_CAP_RESUME_STANDBY_PCMCIA 0x0040 /* Resume on PCMCIA Ring */
#define APM_CAP_RESUME_SUSPEND_PCMCIA 0x0080 /* Resume on PCMCIA Ring */
/*
* ioctl operations
*/
#include <linux/ioctl.h>
#define APM_IOC_STANDBY _IO('A', 1)
#define APM_IOC_SUSPEND _IO('A', 2)
#endif /* LINUX_APM_H */
include/linux/atalk.h
浏览文件 @ 0b381a28
#ifndef __LINUX_ATALK_H__
#define __LINUX_ATALK_H__
#include <linux/types.h>
#include <asm/byteorder.h>
#include <linux/socket.h>
/*
* AppleTalk networking structures
*
* The following are directly referenced from the University Of Michigan
* netatalk for compatibility reasons.
*/
#define ATPORT_FIRST 1
#define ATPORT_RESERVED 128
#define ATPORT_LAST 254 /* 254 is only legal on localtalk */
#define ATADDR_ANYNET (__u16)0
#define ATADDR_ANYNODE (__u8)0
#define ATADDR_ANYPORT (__u8)0
#define ATADDR_BCAST (__u8)255
#define DDP_MAXSZ 587
#define DDP_MAXHOPS 15 /* 4 bits of hop counter */
#define SIOCATALKDIFADDR (SIOCPROTOPRIVATE + 0)
struct atalk_addr {
__be16 s_net;
__u8 s_node;
};
struct sockaddr_at {
__kernel_sa_family_t sat_family;
__u8 sat_port;
struct atalk_addr sat_addr;
char sat_zero[8];
};
struct atalk_netrange {
__u8 nr_phase;
__be16 nr_firstnet;
__be16 nr_lastnet;
};
#ifdef __KERNEL__
#include <net/sock.h>
#include <uapi/linux/atalk.h>
struct atalk_route {
struct net_device *dev;
......@@ -205,5 +165,4 @@ extern void atalk_proc_exit(void);
#define atalk_proc_exit() do { } while(0)
#endif /* CONFIG_PROC_FS */
#endif /* __KERNEL__ */
#endif /* __LINUX_ATALK_H__ */
include/linux/atm.h
浏览文件 @ 0b381a28
/* atm.h - general ATM declarations */
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
/*
* WARNING: User-space programs should not #include <linux/atm.h> directly.
* Instead, #include <atm.h>
*/
#ifndef _LINUX_ATM_H
#define _LINUX_ATM_H
/*
* BEGIN_xx and END_xx markers are used for automatic generation of
* documentation. Do not change them.
*/
#include <linux/compiler.h>
#include <linux/atmapi.h>
#include <linux/atmsap.h>
#include <linux/atmioc.h>
#include <linux/types.h>
/* general ATM constants */
#define ATM_CELL_SIZE 53 /* ATM cell size incl. header */
#define ATM_CELL_PAYLOAD 48 /* ATM payload size */
#define ATM_AAL0_SDU 52 /* AAL0 SDU size */
#define ATM_MAX_AAL34_PDU 65535 /* maximum AAL3/4 PDU payload */
#define ATM_AAL5_TRAILER 8 /* AAL5 trailer size */
#define ATM_MAX_AAL5_PDU 65535 /* maximum AAL5 PDU payload */
#define ATM_MAX_CDV 9999 /* maximum (default) CDV */
#define ATM_NOT_RSV_VCI 32 /* first non-reserved VCI value */
#define ATM_MAX_VPI 255 /* maximum VPI at the UNI */
#define ATM_MAX_VPI_NNI 4096 /* maximum VPI at the NNI */
#define ATM_MAX_VCI 65535 /* maximum VCI */
/* "protcol" values for the socket system call */
#define ATM_NO_AAL 0 /* AAL not specified */
#define ATM_AAL0 13 /* "raw" ATM cells */
#define ATM_AAL1 1 /* AAL1 (CBR) */
#define ATM_AAL2 2 /* AAL2 (VBR) */
#define ATM_AAL34 3 /* AAL3/4 (data) */
#define ATM_AAL5 5 /* AAL5 (data) */
/*
* socket option name coding functions
*
* Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
* << 22 only reserves 9 bits for the level. On some architectures
* SOL_SOCKET is 0xFFFF, so that's a bit of a problem
*/
#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \
sizeof(t))
#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF))
#define __SO_NUMBER(c) (((c) >> 16) & 0x3f)
#define __SO_SIZE(c) ((c) & 0x3fff)
/*
* ATM layer
*/
#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int)
/* set CLP bit value - TODO */
#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange)
/* connection identifier range; socket must be
bound or connected */
#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos)
/* Quality of Service setting */
#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap)
/* Service Access Point */
#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
/* "PVC" address (also for SVCs); get only */
#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int)
/* make this vc a p2mp */
/*
* Note @@@: since the socket layers don't really distinguish the control and
* the data plane but generally seems to be data plane-centric, any layer is
* about equally wrong for the SAP. If you have a better idea about this,
* please speak up ...
*/
/* ATM cell header (for AAL0) */
/* BEGIN_CH */
#define ATM_HDR_GFC_MASK 0xf0000000
#define ATM_HDR_GFC_SHIFT 28
#define ATM_HDR_VPI_MASK 0x0ff00000
#define ATM_HDR_VPI_SHIFT 20
#define ATM_HDR_VCI_MASK 0x000ffff0
#define ATM_HDR_VCI_SHIFT 4
#define ATM_HDR_PTI_MASK 0x0000000e
#define ATM_HDR_PTI_SHIFT 1
#define ATM_HDR_CLP 0x00000001
/* END_CH */
/* PTI codings */
/* BEGIN_PTI */
#define ATM_PTI_US0 0 /* user data cell, congestion not exp, SDU-type 0 */
#define ATM_PTI_US1 1 /* user data cell, congestion not exp, SDU-type 1 */
#define ATM_PTI_UCES0 2 /* user data cell, cong. experienced, SDU-type 0 */
#define ATM_PTI_UCES1 3 /* user data cell, cong. experienced, SDU-type 1 */
#define ATM_PTI_SEGF5 4 /* segment OAM F5 flow related cell */
#define ATM_PTI_E2EF5 5 /* end-to-end OAM F5 flow related cell */
#define ATM_PTI_RSV_RM 6 /* reserved for traffic control/resource mgmt */
#define ATM_PTI_RSV 7 /* reserved */
/* END_PTI */
/*
* The following items should stay in linux/atm.h, which should be linked to
* netatm/atm.h
*/
/* Traffic description */
#define ATM_NONE 0 /* no traffic */
#define ATM_UBR 1
#define ATM_CBR 2
#define ATM_VBR 3
#define ATM_ABR 4
#define ATM_ANYCLASS 5 /* compatible with everything */
#define ATM_MAX_PCR -1 /* maximum available PCR */
struct atm_trafprm {
unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */
int max_pcr; /* maximum PCR in cells per second */
int pcr; /* desired PCR in cells per second */
int min_pcr; /* minimum PCR in cells per second */
int max_cdv; /* maximum CDV in microseconds */
int max_sdu; /* maximum SDU in bytes */
/* extra params for ABR */
unsigned int icr; /* Initial Cell Rate (24-bit) */
unsigned int tbe; /* Transient Buffer Exposure (24-bit) */
unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */
unsigned int rif : 4; /* Rate Increment Factor (4-bit) */
unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */
unsigned int nrm_pres :1; /* nrm present bit */
unsigned int trm_pres :1; /* rm present bit */
unsigned int adtf_pres :1; /* adtf present bit */
unsigned int cdf_pres :1; /* cdf present bit*/
unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */
unsigned int trm :3; /* Time between forward RM cells (3-bit) */
unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */
unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */
unsigned int spare :9; /* spare bits */
};
struct atm_qos {
struct atm_trafprm txtp; /* parameters in TX direction */
struct atm_trafprm rxtp __ATM_API_ALIGN;
/* parameters in RX direction */
unsigned char aal __ATM_API_ALIGN;
};
/* PVC addressing */
#define ATM_ITF_ANY -1 /* "magic" PVC address values */
#define ATM_VPI_ANY -1
#define ATM_VCI_ANY -1
#define ATM_VPI_UNSPEC -2
#define ATM_VCI_UNSPEC -2
struct sockaddr_atmpvc {
unsigned short sap_family; /* address family, AF_ATMPVC */
struct { /* PVC address */
short itf; /* ATM interface */
short vpi; /* VPI (only 8 bits at UNI) */
int vci; /* VCI (only 16 bits at UNI) */
} sap_addr __ATM_API_ALIGN; /* PVC address */
};
/* SVC addressing */
#define ATM_ESA_LEN 20 /* ATM End System Address length */
#define ATM_E164_LEN 12 /* maximum E.164 number length */
#define ATM_AFI_DCC 0x39 /* DCC ATM Format */
#define ATM_AFI_ICD 0x47 /* ICD ATM Format */
#define ATM_AFI_E164 0x45 /* E.164 ATM Format */
#define ATM_AFI_LOCAL 0x49 /* Local ATM Format */
#define ATM_AFI_DCC_GROUP 0xBD /* DCC ATM Group Format */
#define ATM_AFI_ICD_GROUP 0xC5 /* ICD ATM Group Format */
#define ATM_AFI_E164_GROUP 0xC3 /* E.164 ATM Group Format */
#define ATM_AFI_LOCAL_GROUP 0xC7 /* Local ATM Group Format */
#include <uapi/linux/atm.h>
#define ATM_LIJ_NONE 0 /* no leaf-initiated join */
#define ATM_LIJ 1 /* request joining */
#define ATM_LIJ_RPJ 2 /* set to root-prompted join */
#define ATM_LIJ_NJ 3 /* set to network join */
struct sockaddr_atmsvc {
unsigned short sas_family; /* address family, AF_ATMSVC */
struct { /* SVC address */
unsigned char prv[ATM_ESA_LEN];/* private ATM address */
char pub[ATM_E164_LEN+1]; /* public address (E.164) */
/* unused addresses must be bzero'ed */
char lij_type; /* role in LIJ call; one of ATM_LIJ* */
__u32 lij_id; /* LIJ call identifier */
} sas_addr __ATM_API_ALIGN; /* SVC address */
};
static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
{
return *addr.sas_addr.prv || *addr.sas_addr.pub;
}
static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
{
return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
}
/*
* Some stuff for linux/sockios.h
*/
struct atmif_sioc {
int number;
int length;
void __user *arg;
};
#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
struct compat_atmif_sioc {
......@@ -246,6 +13,3 @@ struct compat_atmif_sioc {
};
#endif
#endif
typedef unsigned short atm_backend_t;
#endif
include/linux/atm_tcp.h
浏览文件 @ 0b381a28
......@@ -3,61 +3,11 @@
/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
#ifndef LINUX_ATM_TCP_H
#define LINUX_ATM_TCP_H
#include <linux/atmapi.h>
#include <linux/atm.h>
#include <linux/atmioc.h>
#include <linux/types.h>
/*
* All values in struct atmtcp_hdr are in network byte order
*/
struct atmtcp_hdr {
__u16 vpi;
__u16 vci;
__u32 length; /* ... of data part */
};
/*
* All values in struct atmtcp_command are in host byte order
*/
#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */
#define ATMTCP_CTRL_OPEN 1 /* request/reply */
#define ATMTCP_CTRL_CLOSE 2 /* request/reply */
#include <uapi/linux/atm_tcp.h>
struct atmtcp_control {
struct atmtcp_hdr hdr; /* must be first */
int type; /* message type; both directions */
atm_kptr_t vcc; /* both directions */
struct sockaddr_atmpvc addr; /* suggested value from kernel */
struct atm_qos qos; /* both directions */
int result; /* to kernel only */
} __ATM_API_ALIGN;
/*
* Field usage:
* Messge type dir. hdr.v?i type addr qos vcc result
* ----------- ---- ------- ---- ---- --- --- ------
* OPEN K->D Y Y Y Y Y 0
* OPEN D->K - Y Y Y Y Y
* CLOSE K->D - - Y - Y 0
* CLOSE D->K - - - - Y Y
*/
#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */
#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP
interface */
#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP
interface */
#ifdef __KERNEL__
struct atm_tcp_ops {
int (*attach)(struct atm_vcc *vcc,int itf);
......@@ -69,5 +19,3 @@ struct atm_tcp_ops {
extern struct atm_tcp_ops atm_tcp_ops;
#endif
#endif
include/linux/atmdev.h
浏览文件 @ 0b381a28
/* atmdev.h - ATM device driver declarations and various related items */
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
#ifndef LINUX_ATMDEV_H
#define LINUX_ATMDEV_H
#include <linux/atmapi.h>
#include <linux/atm.h>
#include <linux/atmioc.h>
#define ESI_LEN 6
#define ATM_OC3_PCR (155520000/270*260/8/53)
/* OC3 link rate: 155520000 bps
SONET overhead: /270*260 (9 section, 1 path)
bits per cell: /8/53
max cell rate: 353207.547 cells/sec */
#define ATM_25_PCR ((25600000/8-8000)/54)
/* 25 Mbps ATM cell rate (59111) */
#define ATM_OC12_PCR (622080000/1080*1040/8/53)
/* OC12 link rate: 622080000 bps
SONET overhead: /1080*1040
bits per cell: /8/53
max cell rate: 1412830.188 cells/sec */
#define ATM_DS3_PCR (8000*12)
/* DS3: 12 cells in a 125 usec time slot */
#define __AAL_STAT_ITEMS \
__HANDLE_ITEM(tx); /* TX okay */ \
__HANDLE_ITEM(tx_err); /* TX errors */ \
__HANDLE_ITEM(rx); /* RX okay */ \
__HANDLE_ITEM(rx_err); /* RX errors */ \
__HANDLE_ITEM(rx_drop); /* RX out of memory */
struct atm_aal_stats {
#define __HANDLE_ITEM(i) int i
__AAL_STAT_ITEMS
#undef __HANDLE_ITEM
};
struct atm_dev_stats {
struct atm_aal_stats aal0;
struct atm_aal_stats aal34;
struct atm_aal_stats aal5;
} __ATM_API_ALIGN;
#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
/* get link rate */
#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
/* get interface names (numbers) */
#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
/* get interface type name */
#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
/* get interface ESI */
#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
/* get itf's local ATM addr. list */
#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
/* reset itf's ATM address list */
#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
/* add a local ATM address */
#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
/* remove a local ATM address */
#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
/* get connection identifier range */
#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
/* set connection identifier range */
#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
/* set interface ESI */
#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
/* force interface ESI */
#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
/* register a LECS address */
#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
/* unregister a LECS address */
#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
/* retrieve LECS address(es) */
#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
/* get AAL layer statistics */
#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
/* get AAL layer statistics and zero */
#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
/* get loopback mode */
#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
/* set loopback mode */
#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
/* query supported loopback modes */
#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
/* enable or disable single-copy */
#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
/* set backend handler */
#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
/* use backend to make new if */
#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
/* add party to p2mp call */
#ifdef CONFIG_COMPAT
/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
#endif
#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
/* drop party from p2mp call */
/*
* These are backend handkers that can be set via the ATM_SETBACKEND call
* above. In the future we may support dynamic loading of these - for now,
* they're just being used to share the ATMIOC_BACKEND ioctls
*/
#define ATM_BACKEND_RAW 0
#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
/* for ATM_GETTYPE */
#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
/*
* Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
*/
/* Point of loopback CPU-->SAR-->PHY-->line--> ... */
#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
/* RESERVED 4 loop back on PHY side ---' */
#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
/* Direction of loopback */
#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
#define __ATM_LM_XTLOC(n) ((n) & 0xff)
#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
#define ATM_LM_NONE 0 /* no loopback */
#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
/*
* Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
* __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
*/
struct atm_iobuf {
int length;
void __user *buffer;
};
/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
struct atm_cirange {
signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
};
/* for ATM_SETSC; actually taken from the ATM_VF number space */
#define ATM_SC_RX 1024 /* enable RX single-copy */
#define ATM_SC_TX 2048 /* enable TX single-copy */
#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
anyway */
/* MF: change_qos (Modify) flags */
#define ATM_MF_IMMED 1 /* Block until change is effective */
#define ATM_MF_INC_RSV 2 /* Change reservation on increase */
#define ATM_MF_INC_SHP 4 /* Change shaping on increase */
#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
#define ATM_MF_BWD 32 /* Set the backward direction parameters */
#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
ATM_MF_DEC_SHP | ATM_MF_BWD)
/*
* ATM_VS_* are used to express VC state in a human-friendly way.
*/
#define ATM_VS_IDLE 0 /* VC is not used */
#define ATM_VS_CONNECTED 1 /* VC is connected */
#define ATM_VS_CLOSING 2 /* VC is closing */
#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
#define ATM_VS_BOUND 5 /* VC is bound */
#define ATM_VS2TXT_MAP \
"IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
#define ATM_VF2TXT_MAP \
"ADDR", "READY", "PARTIAL", "REGIS", \
"RELEASED", "HASQOS", "LISTEN", "META", \
"256", "512", "1024", "2048", \
"SESSION", "HASSAP", "BOUND", "CLOSE"
#ifdef __KERNEL__
#include <linux/wait.h> /* wait_queue_head_t */
#include <linux/time.h> /* struct timeval */
#include <linux/net.h>
......@@ -221,6 +11,7 @@ struct atm_cirange {
#include <linux/uio.h>
#include <net/sock.h>
#include <linux/atomic.h>
#include <uapi/linux/atmdev.h>
#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>
......@@ -521,6 +312,4 @@ void deregister_atm_ioctl(struct atm_ioctl *);
int register_atmdevice_notifier(struct notifier_block *nb);
void unregister_atmdevice_notifier(struct notifier_block *nb);
#endif /* __KERNEL__ */
#endif
include/linux/audit.h
浏览文件 @ 0b381a28
......@@ -20,389 +20,11 @@
* Written by Rickard E. (Rik) Faith <faith@redhat.com>
*
*/
#ifndef _LINUX_AUDIT_H_
#define _LINUX_AUDIT_H_
#include <linux/types.h>
#include <linux/elf-em.h>
#include <linux/ptrace.h>
/* The netlink messages for the audit system is divided into blocks:
* 1000 - 1099 are for commanding the audit system
* 1100 - 1199 user space trusted application messages
* 1200 - 1299 messages internal to the audit daemon
* 1300 - 1399 audit event messages
* 1400 - 1499 SE Linux use
* 1500 - 1599 kernel LSPP events
* 1600 - 1699 kernel crypto events
* 1700 - 1799 kernel anomaly records
* 1800 - 1899 kernel integrity events
* 1900 - 1999 future kernel use
* 2000 is for otherwise unclassified kernel audit messages (legacy)
* 2001 - 2099 unused (kernel)
* 2100 - 2199 user space anomaly records
* 2200 - 2299 user space actions taken in response to anomalies
* 2300 - 2399 user space generated LSPP events
* 2400 - 2499 user space crypto events
* 2500 - 2999 future user space (maybe integrity labels and related events)
*
* Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
* exclusively user space. 1300-2099 is kernel --> user space
* communication.
*/
#define AUDIT_GET 1000 /* Get status */
#define AUDIT_SET 1001 /* Set status (enable/disable/auditd) */
#define AUDIT_LIST 1002 /* List syscall rules -- deprecated */
#define AUDIT_ADD 1003 /* Add syscall rule -- deprecated */
#define AUDIT_DEL 1004 /* Delete syscall rule -- deprecated */
#define AUDIT_USER 1005 /* Message from userspace -- deprecated */
#define AUDIT_LOGIN 1006 /* Define the login id and information */
#define AUDIT_WATCH_INS 1007 /* Insert file/dir watch entry */
#define AUDIT_WATCH_REM 1008 /* Remove file/dir watch entry */
#define AUDIT_WATCH_LIST 1009 /* List all file/dir watches */
#define AUDIT_SIGNAL_INFO 1010 /* Get info about sender of signal to auditd */
#define AUDIT_ADD_RULE 1011 /* Add syscall filtering rule */
#define AUDIT_DEL_RULE 1012 /* Delete syscall filtering rule */
#define AUDIT_LIST_RULES 1013 /* List syscall filtering rules */
#define AUDIT_TRIM 1014 /* Trim junk from watched tree */
#define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */
#define AUDIT_TTY_GET 1016 /* Get TTY auditing status */
#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */
#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */
#define AUDIT_USER_AVC 1107 /* We filter this differently */
#define AUDIT_USER_TTY 1124 /* Non-ICANON TTY input meaning */
#define AUDIT_LAST_USER_MSG 1199
#define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */
#define AUDIT_LAST_USER_MSG2 2999
#define AUDIT_DAEMON_START 1200 /* Daemon startup record */
#define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */
#define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */
#define AUDIT_DAEMON_CONFIG 1203 /* Daemon config change */
#define AUDIT_SYSCALL 1300 /* Syscall event */
/* #define AUDIT_FS_WATCH 1301 * Deprecated */
#define AUDIT_PATH 1302 /* Filename path information */
#define AUDIT_IPC 1303 /* IPC record */
#define AUDIT_SOCKETCALL 1304 /* sys_socketcall arguments */
#define AUDIT_CONFIG_CHANGE 1305 /* Audit system configuration change */
#define AUDIT_SOCKADDR 1306 /* sockaddr copied as syscall arg */
#define AUDIT_CWD 1307 /* Current working directory */
#define AUDIT_EXECVE 1309 /* execve arguments */
#define AUDIT_IPC_SET_PERM 1311 /* IPC new permissions record type */
#define AUDIT_MQ_OPEN 1312 /* POSIX MQ open record type */
#define AUDIT_MQ_SENDRECV 1313 /* POSIX MQ send/receive record type */
#define AUDIT_MQ_NOTIFY 1314 /* POSIX MQ notify record type */
#define AUDIT_MQ_GETSETATTR 1315 /* POSIX MQ get/set attribute record type */
#define AUDIT_KERNEL_OTHER 1316 /* For use by 3rd party modules */
#define AUDIT_FD_PAIR 1317 /* audit record for pipe/socketpair */
#define AUDIT_OBJ_PID 1318 /* ptrace target */
#define AUDIT_TTY 1319 /* Input on an administrative TTY */
#define AUDIT_EOE 1320 /* End of multi-record event */
#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */
#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */
#define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */
#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */
#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */
#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */
#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */
#define AUDIT_AVC_PATH 1402 /* dentry, vfsmount pair from avc */
#define AUDIT_MAC_POLICY_LOAD 1403 /* Policy file load */
#define AUDIT_MAC_STATUS 1404 /* Changed enforcing,permissive,off */
#define AUDIT_MAC_CONFIG_CHANGE 1405 /* Changes to booleans */
#define AUDIT_MAC_UNLBL_ALLOW 1406 /* NetLabel: allow unlabeled traffic */
#define AUDIT_MAC_CIPSOV4_ADD 1407 /* NetLabel: add CIPSOv4 DOI entry */
#define AUDIT_MAC_CIPSOV4_DEL 1408 /* NetLabel: del CIPSOv4 DOI entry */
#define AUDIT_MAC_MAP_ADD 1409 /* NetLabel: add LSM domain mapping */
#define AUDIT_MAC_MAP_DEL 1410 /* NetLabel: del LSM domain mapping */
#define AUDIT_MAC_IPSEC_ADDSA 1411 /* Not used */
#define AUDIT_MAC_IPSEC_DELSA 1412 /* Not used */
#define AUDIT_MAC_IPSEC_ADDSPD 1413 /* Not used */
#define AUDIT_MAC_IPSEC_DELSPD 1414 /* Not used */
#define AUDIT_MAC_IPSEC_EVENT 1415 /* Audit an IPSec event */
#define AUDIT_MAC_UNLBL_STCADD 1416 /* NetLabel: add a static label */
#define AUDIT_MAC_UNLBL_STCDEL 1417 /* NetLabel: del a static label */
#define AUDIT_FIRST_KERN_ANOM_MSG 1700
#define AUDIT_LAST_KERN_ANOM_MSG 1799
#define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */
#define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */
#define AUDIT_ANOM_LINK 1702 /* Suspicious use of file links */
#define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */
#define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */
#define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */
#define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */
#define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */
#define AUDIT_INTEGRITY_RULE 1805 /* policy rule */
#define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */
/* Rule flags */
#define AUDIT_FILTER_USER 0x00 /* Apply rule to user-generated messages */
#define AUDIT_FILTER_TASK 0x01 /* Apply rule at task creation (not syscall) */
#define AUDIT_FILTER_ENTRY 0x02 /* Apply rule at syscall entry */
#define AUDIT_FILTER_WATCH 0x03 /* Apply rule to file system watches */
#define AUDIT_FILTER_EXIT 0x04 /* Apply rule at syscall exit */
#define AUDIT_FILTER_TYPE 0x05 /* Apply rule at audit_log_start */
#define AUDIT_NR_FILTERS 6
#define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */
/* Rule actions */
#define AUDIT_NEVER 0 /* Do not build context if rule matches */
#define AUDIT_POSSIBLE 1 /* Build context if rule matches */
#define AUDIT_ALWAYS 2 /* Generate audit record if rule matches */
/* Rule structure sizes -- if these change, different AUDIT_ADD and
* AUDIT_LIST commands must be implemented. */
#define AUDIT_MAX_FIELDS 64
#define AUDIT_MAX_KEY_LEN 256
#define AUDIT_BITMASK_SIZE 64
#define AUDIT_WORD(nr) ((__u32)((nr)/32))
#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32))
#define AUDIT_SYSCALL_CLASSES 16
#define AUDIT_CLASS_DIR_WRITE 0
#define AUDIT_CLASS_DIR_WRITE_32 1
#define AUDIT_CLASS_CHATTR 2
#define AUDIT_CLASS_CHATTR_32 3
#define AUDIT_CLASS_READ 4
#define AUDIT_CLASS_READ_32 5
#define AUDIT_CLASS_WRITE 6
#define AUDIT_CLASS_WRITE_32 7
#define AUDIT_CLASS_SIGNAL 8
#define AUDIT_CLASS_SIGNAL_32 9
/* This bitmask is used to validate user input. It represents all bits that
* are currently used in an audit field constant understood by the kernel.
* If you are adding a new #define AUDIT_<whatever>, please ensure that
* AUDIT_UNUSED_BITS is updated if need be. */
#define AUDIT_UNUSED_BITS 0x07FFFC00
/* AUDIT_FIELD_COMPARE rule list */
#define AUDIT_COMPARE_UID_TO_OBJ_UID 1
#define AUDIT_COMPARE_GID_TO_OBJ_GID 2
#define AUDIT_COMPARE_EUID_TO_OBJ_UID 3
#define AUDIT_COMPARE_EGID_TO_OBJ_GID 4
#define AUDIT_COMPARE_AUID_TO_OBJ_UID 5
#define AUDIT_COMPARE_SUID_TO_OBJ_UID 6
#define AUDIT_COMPARE_SGID_TO_OBJ_GID 7
#define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8
#define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9
#define AUDIT_COMPARE_UID_TO_AUID 10
#define AUDIT_COMPARE_UID_TO_EUID 11
#define AUDIT_COMPARE_UID_TO_FSUID 12
#define AUDIT_COMPARE_UID_TO_SUID 13
#define AUDIT_COMPARE_AUID_TO_FSUID 14
#define AUDIT_COMPARE_AUID_TO_SUID 15
#define AUDIT_COMPARE_AUID_TO_EUID 16
#define AUDIT_COMPARE_EUID_TO_SUID 17
#define AUDIT_COMPARE_EUID_TO_FSUID 18
#define AUDIT_COMPARE_SUID_TO_FSUID 19
#define AUDIT_COMPARE_GID_TO_EGID 20
#define AUDIT_COMPARE_GID_TO_FSGID 21
#define AUDIT_COMPARE_GID_TO_SGID 22
#define AUDIT_COMPARE_EGID_TO_FSGID 23
#define AUDIT_COMPARE_EGID_TO_SGID 24
#define AUDIT_COMPARE_SGID_TO_FSGID 25
#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_SGID_TO_FSGID
/* Rule fields */
/* These are useful when checking the
* task structure at task creation time
* (AUDIT_PER_TASK). */
#define AUDIT_PID 0
#define AUDIT_UID 1
#define AUDIT_EUID 2
#define AUDIT_SUID 3
#define AUDIT_FSUID 4
#define AUDIT_GID 5
#define AUDIT_EGID 6
#define AUDIT_SGID 7
#define AUDIT_FSGID 8
#define AUDIT_LOGINUID 9
#define AUDIT_PERS 10
#define AUDIT_ARCH 11
#define AUDIT_MSGTYPE 12
#define AUDIT_SUBJ_USER 13 /* security label user */
#define AUDIT_SUBJ_ROLE 14 /* security label role */
#define AUDIT_SUBJ_TYPE 15 /* security label type */
#define AUDIT_SUBJ_SEN 16 /* security label sensitivity label */
#define AUDIT_SUBJ_CLR 17 /* security label clearance label */
#define AUDIT_PPID 18
#define AUDIT_OBJ_USER 19
#define AUDIT_OBJ_ROLE 20
#define AUDIT_OBJ_TYPE 21
#define AUDIT_OBJ_LEV_LOW 22
#define AUDIT_OBJ_LEV_HIGH 23
/* These are ONLY useful when checking
* at syscall exit time (AUDIT_AT_EXIT). */
#define AUDIT_DEVMAJOR 100
#define AUDIT_DEVMINOR 101
#define AUDIT_INODE 102
#define AUDIT_EXIT 103
#define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */
#define AUDIT_WATCH 105
#define AUDIT_PERM 106
#define AUDIT_DIR 107
#define AUDIT_FILETYPE 108
#define AUDIT_OBJ_UID 109
#define AUDIT_OBJ_GID 110
#define AUDIT_FIELD_COMPARE 111
#define AUDIT_ARG0 200
#define AUDIT_ARG1 (AUDIT_ARG0+1)
#define AUDIT_ARG2 (AUDIT_ARG0+2)
#define AUDIT_ARG3 (AUDIT_ARG0+3)
#define AUDIT_FILTERKEY 210
#define AUDIT_NEGATE 0x80000000
/* These are the supported operators.
* 4 2 1 8
* = > < ?
* ----------
* 0 0 0 0 00 nonsense
* 0 0 0 1 08 & bit mask
* 0 0 1 0 10 <
* 0 1 0 0 20 >
* 0 1 1 0 30 !=
* 1 0 0 0 40 =
* 1 0 0 1 48 &= bit test
* 1 0 1 0 50 <=
* 1 1 0 0 60 >=
* 1 1 1 1 78 all operators
*/
#define AUDIT_BIT_MASK 0x08000000
#define AUDIT_LESS_THAN 0x10000000
#define AUDIT_GREATER_THAN 0x20000000
#define AUDIT_NOT_EQUAL 0x30000000
#define AUDIT_EQUAL 0x40000000
#define AUDIT_BIT_TEST (AUDIT_BIT_MASK|AUDIT_EQUAL)
#define AUDIT_LESS_THAN_OR_EQUAL (AUDIT_LESS_THAN|AUDIT_EQUAL)
#define AUDIT_GREATER_THAN_OR_EQUAL (AUDIT_GREATER_THAN|AUDIT_EQUAL)
#define AUDIT_OPERATORS (AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
enum {
Audit_equal,
Audit_not_equal,
Audit_bitmask,
Audit_bittest,
Audit_lt,
Audit_gt,
Audit_le,
Audit_ge,
Audit_bad
};
/* Status symbols */
/* Mask values */
#define AUDIT_STATUS_ENABLED 0x0001
#define AUDIT_STATUS_FAILURE 0x0002
#define AUDIT_STATUS_PID 0x0004
#define AUDIT_STATUS_RATE_LIMIT 0x0008
#define AUDIT_STATUS_BACKLOG_LIMIT 0x0010
/* Failure-to-log actions */
#define AUDIT_FAIL_SILENT 0
#define AUDIT_FAIL_PRINTK 1
#define AUDIT_FAIL_PANIC 2
/* distinguish syscall tables */
#define __AUDIT_ARCH_64BIT 0x80000000
#define __AUDIT_ARCH_LE 0x40000000
#define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_ARMEB (EM_ARM)
#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_FRV (EM_FRV)
#define AUDIT_ARCH_H8300 (EM_H8_300)
#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_M32R (EM_M32R)
#define AUDIT_ARCH_M68K (EM_68K)
#define AUDIT_ARCH_MIPS (EM_MIPS)
#define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT)
#define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_OPENRISC (EM_OPENRISC)
#define AUDIT_ARCH_PARISC (EM_PARISC)
#define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT)
#define AUDIT_ARCH_PPC (EM_PPC)
#define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT)
#define AUDIT_ARCH_S390 (EM_S390)
#define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT)
#define AUDIT_ARCH_SH (EM_SH)
#define AUDIT_ARCH_SHEL (EM_SH|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_SH64 (EM_SH|__AUDIT_ARCH_64BIT)
#define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_SPARC (EM_SPARC)
#define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT)
#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
#define AUDIT_PERM_EXEC 1
#define AUDIT_PERM_WRITE 2
#define AUDIT_PERM_READ 4
#define AUDIT_PERM_ATTR 8
struct audit_status {
__u32 mask; /* Bit mask for valid entries */
__u32 enabled; /* 1 = enabled, 0 = disabled */
__u32 failure; /* Failure-to-log action */
__u32 pid; /* pid of auditd process */
__u32 rate_limit; /* messages rate limit (per second) */
__u32 backlog_limit; /* waiting messages limit */
__u32 lost; /* messages lost */
__u32 backlog; /* messages waiting in queue */
};
struct audit_tty_status {
__u32 enabled; /* 1 = enabled, 0 = disabled */
};
/* audit_rule_data supports filter rules with both integer and string
* fields. It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
* AUDIT_LIST_RULES requests.
*/
struct audit_rule_data {
__u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
__u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
__u32 field_count;
__u32 mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
__u32 fields[AUDIT_MAX_FIELDS];
__u32 values[AUDIT_MAX_FIELDS];
__u32 fieldflags[AUDIT_MAX_FIELDS];
__u32 buflen; /* total length of string fields */
char buf[0]; /* string fields buffer */
};
/* audit_rule is supported to maintain backward compatibility with
* userspace. It supports integer fields only and corresponds to
* AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
*/
struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
__u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
__u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
__u32 field_count;
__u32 mask[AUDIT_BITMASK_SIZE];
__u32 fields[AUDIT_MAX_FIELDS];
__u32 values[AUDIT_MAX_FIELDS];
};
#ifdef __KERNEL__
#include <linux/sched.h>
#include <uapi/linux/audit.h>
struct audit_sig_info {
uid_t uid;
......@@ -860,4 +482,3 @@ static inline void audit_log_string(struct audit_buffer *ab, const char *buf)
}
#endif
#endif
include/linux/auto_fs.h
浏览文件 @ 0b381a28
......@@ -10,77 +10,11 @@
*
* ----------------------------------------------------------------------- */
#ifndef _LINUX_AUTO_FS_H
#define _LINUX_AUTO_FS_H
#include <linux/types.h>
#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/limits.h>
#include <linux/ioctl.h>
#else
#include <sys/ioctl.h>
#endif /* __KERNEL__ */
/* This file describes autofs v3 */
#define AUTOFS_PROTO_VERSION 3
/* Range of protocol versions defined */
#define AUTOFS_MAX_PROTO_VERSION AUTOFS_PROTO_VERSION
#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION
/*
* Architectures where both 32- and 64-bit binaries can be executed
* on 64-bit kernels need this. This keeps the structure format
* uniform, and makes sure the wait_queue_token isn't too big to be
* passed back down to the kernel.
*
* This assumes that on these architectures:
* mode 32 bit 64 bit
* -------------------------
* int 32 bit 32 bit
* long 32 bit 64 bit
*
* If so, 32-bit user-space code should be backwards compatible.
*/
#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
|| defined(__powerpc__) || defined(__s390__)
typedef unsigned int autofs_wqt_t;
#else
typedef unsigned long autofs_wqt_t;
#endif
/* Packet types */
#define autofs_ptype_missing 0 /* Missing entry (mount request) */
#define autofs_ptype_expire 1 /* Expire entry (umount request) */
struct autofs_packet_hdr {
int proto_version; /* Protocol version */
int type; /* Type of packet */
};
struct autofs_packet_missing {
struct autofs_packet_hdr hdr;
autofs_wqt_t wait_queue_token;
int len;
char name[NAME_MAX+1];
};
/* v3 expire (via ioctl) */
struct autofs_packet_expire {
struct autofs_packet_hdr hdr;
int len;
char name[NAME_MAX+1];
};
#define AUTOFS_IOC_READY _IO(0x93,0x60)
#define AUTOFS_IOC_FAIL _IO(0x93,0x61)
#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62)
#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int)
#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire)
#include <uapi/linux/auto_fs.h>
#endif /* _LINUX_AUTO_FS_H */
include/linux/auxvec.h
浏览文件 @ 0b381a28
#ifndef _LINUX_AUXVEC_H
#define _LINUX_AUXVEC_H
#include <asm/auxvec.h>
#include <uapi/linux/auxvec.h>
/* Symbolic values for the entries in the auxiliary table
put on the initial stack */
#define AT_NULL 0 /* end of vector */
#define AT_IGNORE 1 /* entry should be ignored */
#define AT_EXECFD 2 /* file descriptor of program */
#define AT_PHDR 3 /* program headers for program */
#define AT_PHENT 4 /* size of program header entry */
#define AT_PHNUM 5 /* number of program headers */
#define AT_PAGESZ 6 /* system page size */
#define AT_BASE 7 /* base address of interpreter */
#define AT_FLAGS 8 /* flags */
#define AT_ENTRY 9 /* entry point of program */
#define AT_NOTELF 10 /* program is not ELF */
#define AT_UID 11 /* real uid */
#define AT_EUID 12 /* effective uid */
#define AT_GID 13 /* real gid */
#define AT_EGID 14 /* effective gid */
#define AT_PLATFORM 15 /* string identifying CPU for optimizations */
#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */
#define AT_CLKTCK 17 /* frequency at which times() increments */
/* AT_* values 18 through 22 are reserved */
#define AT_SECURE 23 /* secure mode boolean */
#define AT_BASE_PLATFORM 24 /* string identifying real platform, may
* differ from AT_PLATFORM. */
#define AT_RANDOM 25 /* address of 16 random bytes */
#define AT_EXECFN 31 /* filename of program */
#ifdef __KERNEL__
#define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */
/* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
#endif
#endif /* _LINUX_AUXVEC_H */
include/linux/binfmts.h
浏览文件 @ 0b381a28
#ifndef _LINUX_BINFMTS_H
#define _LINUX_BINFMTS_H
#include <linux/capability.h>
struct pt_regs;
/*
* These are the maximum length and maximum number of strings passed to the
* execve() system call. MAX_ARG_STRLEN is essentially random but serves to
* prevent the kernel from being unduly impacted by misaddressed pointers.
* MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
*/
#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
#define MAX_ARG_STRINGS 0x7FFFFFFF
/* sizeof(linux_binprm->buf) */
#define BINPRM_BUF_SIZE 128
#ifdef __KERNEL__
#include <linux/sched.h>
#include <linux/unistd.h>
#include <asm/exec.h>
#include <uapi/linux/binfmts.h>
#define CORENAME_MAX_SIZE 128
......@@ -141,5 +125,4 @@ extern void free_bprm(struct linux_binprm *);
extern void ret_from_kernel_execve(struct pt_regs *normal) __noreturn;
#endif
#endif /* __KERNEL__ */
#endif /* _LINUX_BINFMTS_H */
include/linux/blktrace_api.h
浏览文件 @ 0b381a28
#ifndef BLKTRACE_H
#define BLKTRACE_H
#include <linux/types.h>
#ifdef __KERNEL__
#include <linux/blkdev.h>
#include <linux/relay.h>
#include <linux/compat.h>
#endif
/*
* Trace categories
*/
enum blktrace_cat {
BLK_TC_READ = 1 << 0, /* reads */
BLK_TC_WRITE = 1 << 1, /* writes */
BLK_TC_FLUSH = 1 << 2, /* flush */
BLK_TC_SYNC = 1 << 3, /* sync IO */
BLK_TC_SYNCIO = BLK_TC_SYNC,
BLK_TC_QUEUE = 1 << 4, /* queueing/merging */
BLK_TC_REQUEUE = 1 << 5, /* requeueing */
BLK_TC_ISSUE = 1 << 6, /* issue */
BLK_TC_COMPLETE = 1 << 7, /* completions */
BLK_TC_FS = 1 << 8, /* fs requests */
BLK_TC_PC = 1 << 9, /* pc requests */
BLK_TC_NOTIFY = 1 << 10, /* special message */
BLK_TC_AHEAD = 1 << 11, /* readahead */
BLK_TC_META = 1 << 12, /* metadata */
BLK_TC_DISCARD = 1 << 13, /* discard requests */
BLK_TC_DRV_DATA = 1 << 14, /* binary per-driver data */
BLK_TC_FUA = 1 << 15, /* fua requests */
BLK_TC_END = 1 << 15, /* we've run out of bits! */
};
#define BLK_TC_SHIFT (16)
#define BLK_TC_ACT(act) ((act) << BLK_TC_SHIFT)
/*
* Basic trace actions
*/
enum blktrace_act {
__BLK_TA_QUEUE = 1, /* queued */
__BLK_TA_BACKMERGE, /* back merged to existing rq */
__BLK_TA_FRONTMERGE, /* front merge to existing rq */
__BLK_TA_GETRQ, /* allocated new request */
__BLK_TA_SLEEPRQ, /* sleeping on rq allocation */
__BLK_TA_REQUEUE, /* request requeued */
__BLK_TA_ISSUE, /* sent to driver */
__BLK_TA_COMPLETE, /* completed by driver */
__BLK_TA_PLUG, /* queue was plugged */
__BLK_TA_UNPLUG_IO, /* queue was unplugged by io */
__BLK_TA_UNPLUG_TIMER, /* queue was unplugged by timer */
__BLK_TA_INSERT, /* insert request */
__BLK_TA_SPLIT, /* bio was split */
__BLK_TA_BOUNCE, /* bio was bounced */
__BLK_TA_REMAP, /* bio was remapped */
__BLK_TA_ABORT, /* request aborted */
__BLK_TA_DRV_DATA, /* driver-specific binary data */
};
/*
* Notify events.
*/
enum blktrace_notify {
__BLK_TN_PROCESS = 0, /* establish pid/name mapping */
__BLK_TN_TIMESTAMP, /* include system clock */
__BLK_TN_MESSAGE, /* Character string message */
};
/*
* Trace actions in full. Additionally, read or write is masked
*/
#define BLK_TA_QUEUE (__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_BACKMERGE (__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_FRONTMERGE (__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_GETRQ (__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_SLEEPRQ (__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_REQUEUE (__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
#define BLK_TA_ISSUE (__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
#define BLK_TA_COMPLETE (__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
#define BLK_TA_PLUG (__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_UNPLUG_IO (__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_UNPLUG_TIMER (__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_INSERT (__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_SPLIT (__BLK_TA_SPLIT)
#define BLK_TA_BOUNCE (__BLK_TA_BOUNCE)
#define BLK_TA_REMAP (__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_ABORT (__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_DRV_DATA (__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_IO_TRACE_MAGIC 0x65617400
#define BLK_IO_TRACE_VERSION 0x07
/*
* The trace itself
*/
struct blk_io_trace {
__u32 magic; /* MAGIC << 8 | version */
__u32 sequence; /* event number */
__u64 time; /* in microseconds */
__u64 sector; /* disk offset */
__u32 bytes; /* transfer length */
__u32 action; /* what happened */
__u32 pid; /* who did it */
__u32 device; /* device number */
__u32 cpu; /* on what cpu did it happen */
__u16 error; /* completion error */
__u16 pdu_len; /* length of data after this trace */
};
/*
* The remap event
*/
struct blk_io_trace_remap {
__be32 device_from;
__be32 device_to;
__be64 sector_from;
};
enum {
Blktrace_setup = 1,
Blktrace_running,
Blktrace_stopped,
};
#define BLKTRACE_BDEV_SIZE 32
/*
* User setup structure passed with BLKTRACESTART
*/
struct blk_user_trace_setup {
char name[BLKTRACE_BDEV_SIZE]; /* output */
__u16 act_mask; /* input */
__u32 buf_size; /* input */
__u32 buf_nr; /* input */
__u64 start_lba;
__u64 end_lba;
__u32 pid;
};
#include <uapi/linux/blktrace_api.h>
#ifdef __KERNEL__
#if defined(CONFIG_BLK_DEV_IO_TRACE)
#include <linux/sysfs.h>
......@@ -250,5 +111,4 @@ extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes);
#endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
#endif /* __KERNEL__ */
#endif
include/linux/bsg.h
浏览文件 @ 0b381a28
#ifndef BSG_H
#define BSG_H
#include <linux/types.h>
#include <uapi/linux/bsg.h>
#define BSG_PROTOCOL_SCSI 0
#define BSG_SUB_PROTOCOL_SCSI_CMD 0
#define BSG_SUB_PROTOCOL_SCSI_TMF 1
#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2
/*
* For flags member below
* sg.h sg_io_hdr also has bits defined for it's flags member. However
* none of these bits are implemented/used by bsg. The bits below are
* allocated to not conflict with sg.h ones anyway.
*/
#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
struct sg_io_v4 {
__s32 guard; /* [i] 'Q' to differentiate from v3 */
__u32 protocol; /* [i] 0 -> SCSI , .... */
__u32 subprotocol; /* [i] 0 -> SCSI command, 1 -> SCSI task
management function, .... */
__u32 request_len; /* [i] in bytes */
__u64 request; /* [i], [*i] {SCSI: cdb} */
__u64 request_tag; /* [i] {SCSI: task tag (only if flagged)} */
__u32 request_attr; /* [i] {SCSI: task attribute} */
__u32 request_priority; /* [i] {SCSI: task priority} */
__u32 request_extra; /* [i] {spare, for padding} */
__u32 max_response_len; /* [i] in bytes */
__u64 response; /* [i], [*o] {SCSI: (auto)sense data} */
/* "dout_": data out (to device); "din_": data in (from device) */
__u32 dout_iovec_count; /* [i] 0 -> "flat" dout transfer else
dout_xfer points to array of iovec */
__u32 dout_xfer_len; /* [i] bytes to be transferred to device */
__u32 din_iovec_count; /* [i] 0 -> "flat" din transfer */
__u32 din_xfer_len; /* [i] bytes to be transferred from device */
__u64 dout_xferp; /* [i], [*i] */
__u64 din_xferp; /* [i], [*o] */
__u32 timeout; /* [i] units: millisecond */
__u32 flags; /* [i] bit mask */
__u64 usr_ptr; /* [i->o] unused internally */
__u32 spare_in; /* [i] */
__u32 driver_status; /* [o] 0 -> ok */
__u32 transport_status; /* [o] 0 -> ok */
__u32 device_status; /* [o] {SCSI: command completion status} */
__u32 retry_delay; /* [o] {SCSI: status auxiliary information} */
__u32 info; /* [o] additional information */
__u32 duration; /* [o] time to complete, in milliseconds */
__u32 response_len; /* [o] bytes of response actually written */
__s32 din_resid; /* [o] din_xfer_len - actual_din_xfer_len */
__s32 dout_resid; /* [o] dout_xfer_len - actual_dout_xfer_len */
__u64 generated_tag; /* [o] {SCSI: transport generated task tag} */
__u32 spare_out; /* [o] */
__u32 padding;
};
#ifdef __KERNEL__
#if defined(CONFIG_BLK_DEV_BSG)
struct bsg_class_device {
......@@ -89,6 +30,4 @@ static inline void bsg_unregister_queue(struct request_queue *q)
}
#endif
#endif /* __KERNEL__ */
#endif
include/linux/byteorder/Kbuild
浏览文件 @ 0b381a28
header-y += big_endian.h
header-y += little_endian.h
include/linux/byteorder/big_endian.h
浏览文件 @ 0b381a28
#ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H
#define _LINUX_BYTEORDER_BIG_ENDIAN_H
#ifndef __BIG_ENDIAN
#define __BIG_ENDIAN 4321
#endif
#ifndef __BIG_ENDIAN_BITFIELD
#define __BIG_ENDIAN_BITFIELD
#endif
#include <uapi/linux/byteorder/big_endian.h>
#include <linux/types.h>
#include <linux/swab.h>
#define __constant_htonl(x) ((__force __be32)(__u32)(x))
#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
#define __constant_htons(x) ((__force __be16)(__u16)(x))
#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
static inline __le64 __cpu_to_le64p(const __u64 *p)
{
return (__force __le64)__swab64p(p);
}
static inline __u64 __le64_to_cpup(const __le64 *p)
{
return __swab64p((__u64 *)p);
}
static inline __le32 __cpu_to_le32p(const __u32 *p)
{
return (__force __le32)__swab32p(p);
}
static inline __u32 __le32_to_cpup(const __le32 *p)
{
return __swab32p((__u32 *)p);
}
static inline __le16 __cpu_to_le16p(const __u16 *p)
{
return (__force __le16)__swab16p(p);
}
static inline __u16 __le16_to_cpup(const __le16 *p)
{
return __swab16p((__u16 *)p);
}
static inline __be64 __cpu_to_be64p(const __u64 *p)
{
return (__force __be64)*p;
}
static inline __u64 __be64_to_cpup(const __be64 *p)
{
return (__force __u64)*p;
}
static inline __be32 __cpu_to_be32p(const __u32 *p)
{
return (__force __be32)*p;
}
static inline __u32 __be32_to_cpup(const __be32 *p)
{
return (__force __u32)*p;
}
static inline __be16 __cpu_to_be16p(const __u16 *p)
{
return (__force __be16)*p;
}
static inline __u16 __be16_to_cpup(const __be16 *p)
{
return (__force __u16)*p;
}
#define __cpu_to_le64s(x) __swab64s((x))
#define __le64_to_cpus(x) __swab64s((x))
#define __cpu_to_le32s(x) __swab32s((x))
#define __le32_to_cpus(x) __swab32s((x))
#define __cpu_to_le16s(x) __swab16s((x))
#define __le16_to_cpus(x) __swab16s((x))
#define __cpu_to_be64s(x) do { (void)(x); } while (0)
#define __be64_to_cpus(x) do { (void)(x); } while (0)
#define __cpu_to_be32s(x) do { (void)(x); } while (0)
#define __be32_to_cpus(x) do { (void)(x); } while (0)
#define __cpu_to_be16s(x) do { (void)(x); } while (0)
#define __be16_to_cpus(x) do { (void)(x); } while (0)
#ifdef __KERNEL__
#include <linux/byteorder/generic.h>
#endif
#endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
include/linux/byteorder/little_endian.h
浏览文件 @ 0b381a28
#ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
#define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
#ifndef __LITTLE_ENDIAN
#define __LITTLE_ENDIAN 1234
#endif
#ifndef __LITTLE_ENDIAN_BITFIELD
#define __LITTLE_ENDIAN_BITFIELD
#endif
#include <uapi/linux/byteorder/little_endian.h>
#include <linux/types.h>
#include <linux/swab.h>
#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
static inline __le64 __cpu_to_le64p(const __u64 *p)
{
return (__force __le64)*p;
}
static inline __u64 __le64_to_cpup(const __le64 *p)
{
return (__force __u64)*p;
}
static inline __le32 __cpu_to_le32p(const __u32 *p)
{
return (__force __le32)*p;
}
static inline __u32 __le32_to_cpup(const __le32 *p)
{
return (__force __u32)*p;
}
static inline __le16 __cpu_to_le16p(const __u16 *p)
{
return (__force __le16)*p;
}
static inline __u16 __le16_to_cpup(const __le16 *p)
{
return (__force __u16)*p;
}
static inline __be64 __cpu_to_be64p(const __u64 *p)
{
return (__force __be64)__swab64p(p);
}
static inline __u64 __be64_to_cpup(const __be64 *p)
{
return __swab64p((__u64 *)p);
}
static inline __be32 __cpu_to_be32p(const __u32 *p)
{
return (__force __be32)__swab32p(p);
}
static inline __u32 __be32_to_cpup(const __be32 *p)
{
return __swab32p((__u32 *)p);
}
static inline __be16 __cpu_to_be16p(const __u16 *p)
{
return (__force __be16)__swab16p(p);
}
static inline __u16 __be16_to_cpup(const __be16 *p)
{
return __swab16p((__u16 *)p);
}
#define __cpu_to_le64s(x) do { (void)(x); } while (0)
#define __le64_to_cpus(x) do { (void)(x); } while (0)
#define __cpu_to_le32s(x) do { (void)(x); } while (0)
#define __le32_to_cpus(x) do { (void)(x); } while (0)
#define __cpu_to_le16s(x) do { (void)(x); } while (0)
#define __le16_to_cpus(x) do { (void)(x); } while (0)
#define __cpu_to_be64s(x) __swab64s((x))
#define __be64_to_cpus(x) __swab64s((x))
#define __cpu_to_be32s(x) __swab32s((x))
#define __be32_to_cpus(x) __swab32s((x))
#define __cpu_to_be16s(x) __swab16s((x))
#define __be16_to_cpus(x) __swab16s((x))
#ifdef __KERNEL__
#include <linux/byteorder/generic.h>
#endif
#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
include/linux/capability.h
浏览文件 @ 0b381a28
......@@ -9,82 +9,11 @@
*
* ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
*/
#ifndef _LINUX_CAPABILITY_H
#define _LINUX_CAPABILITY_H
#include <linux/types.h>
struct task_struct;
/* User-level do most of the mapping between kernel and user
capabilities based on the version tag given by the kernel. The
kernel might be somewhat backwards compatible, but don't bet on
it. */
/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
a set of three capability sets. The transposition of 3*the
following structure to such a composite is better handled in a user
library since the draft standard requires the use of malloc/free
etc.. */
#define _LINUX_CAPABILITY_VERSION_1 0x19980330
#define _LINUX_CAPABILITY_U32S_1 1
#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */
#define _LINUX_CAPABILITY_U32S_2 2
#define _LINUX_CAPABILITY_VERSION_3 0x20080522
#define _LINUX_CAPABILITY_U32S_3 2
typedef struct __user_cap_header_struct {
__u32 version;
int pid;
} __user *cap_user_header_t;
typedef struct __user_cap_data_struct {
__u32 effective;
__u32 permitted;
__u32 inheritable;
} __user *cap_user_data_t;
#define VFS_CAP_REVISION_MASK 0xFF000000
#define VFS_CAP_REVISION_SHIFT 24
#define VFS_CAP_FLAGS_MASK ~VFS_CAP_REVISION_MASK
#define VFS_CAP_FLAGS_EFFECTIVE 0x000001
#define VFS_CAP_REVISION_1 0x01000000
#define VFS_CAP_U32_1 1
#define XATTR_CAPS_SZ_1 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
#define VFS_CAP_REVISION_2 0x02000000
#define VFS_CAP_U32_2 2
#define XATTR_CAPS_SZ_2 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
#include <uapi/linux/capability.h>
#define XATTR_CAPS_SZ XATTR_CAPS_SZ_2
#define VFS_CAP_U32 VFS_CAP_U32_2
#define VFS_CAP_REVISION VFS_CAP_REVISION_2
struct vfs_cap_data {
__le32 magic_etc; /* Little endian */
struct {
__le32 permitted; /* Little endian */
__le32 inheritable; /* Little endian */
} data[VFS_CAP_U32];
};
#ifndef __KERNEL__
/*
* Backwardly compatible definition for source code - trapped in a
* 32-bit world. If you find you need this, please consider using
* libcap to untrap yourself...
*/
#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1
#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1
#else
#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
#define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3
......@@ -105,277 +34,6 @@ struct cpu_vfs_cap_data {
#define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct))
#define _KERNEL_CAP_T_SIZE (sizeof(kernel_cap_t))
#endif
/**
** POSIX-draft defined capabilities.
**/
/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
overrides the restriction of changing file ownership and group
ownership. */
#define CAP_CHOWN 0
/* Override all DAC access, including ACL execute access if
[_POSIX_ACL] is defined. Excluding DAC access covered by
CAP_LINUX_IMMUTABLE. */
#define CAP_DAC_OVERRIDE 1
/* Overrides all DAC restrictions regarding read and search on files
and directories, including ACL restrictions if [_POSIX_ACL] is
defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
#define CAP_DAC_READ_SEARCH 2
/* Overrides all restrictions about allowed operations on files, where
file owner ID must be equal to the user ID, except where CAP_FSETID
is applicable. It doesn't override MAC and DAC restrictions. */
#define CAP_FOWNER 3
/* Overrides the following restrictions that the effective user ID
shall match the file owner ID when setting the S_ISUID and S_ISGID
bits on that file; that the effective group ID (or one of the
supplementary group IDs) shall match the file owner ID when setting
the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
cleared on successful return from chown(2) (not implemented). */
#define CAP_FSETID 4
/* Overrides the restriction that the real or effective user ID of a
process sending a signal must match the real or effective user ID
of the process receiving the signal. */
#define CAP_KILL 5
/* Allows setgid(2) manipulation */
/* Allows setgroups(2) */
/* Allows forged gids on socket credentials passing. */
#define CAP_SETGID 6
/* Allows set*uid(2) manipulation (including fsuid). */
/* Allows forged pids on socket credentials passing. */
#define CAP_SETUID 7
/**
** Linux-specific capabilities
**/
/* Without VFS support for capabilities:
* Transfer any capability in your permitted set to any pid,
* remove any capability in your permitted set from any pid
* With VFS support for capabilities (neither of above, but)
* Add any capability from current's capability bounding set
* to the current process' inheritable set
* Allow taking bits out of capability bounding set
* Allow modification of the securebits for a process
*/
#define CAP_SETPCAP 8
/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
#define CAP_LINUX_IMMUTABLE 9
/* Allows binding to TCP/UDP sockets below 1024 */
/* Allows binding to ATM VCIs below 32 */
#define CAP_NET_BIND_SERVICE 10
/* Allow broadcasting, listen to multicast */
#define CAP_NET_BROADCAST 11
/* Allow interface configuration */
/* Allow administration of IP firewall, masquerading and accounting */
/* Allow setting debug option on sockets */
/* Allow modification of routing tables */
/* Allow setting arbitrary process / process group ownership on
sockets */
/* Allow binding to any address for transparent proxying (also via NET_RAW) */
/* Allow setting TOS (type of service) */
/* Allow setting promiscuous mode */
/* Allow clearing driver statistics */
/* Allow multicasting */
/* Allow read/write of device-specific registers */
/* Allow activation of ATM control sockets */
#define CAP_NET_ADMIN 12
/* Allow use of RAW sockets */
/* Allow use of PACKET sockets */
/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
#define CAP_NET_RAW 13
/* Allow locking of shared memory segments */
/* Allow mlock and mlockall (which doesn't really have anything to do
with IPC) */
#define CAP_IPC_LOCK 14
/* Override IPC ownership checks */
#define CAP_IPC_OWNER 15
/* Insert and remove kernel modules - modify kernel without limit */
#define CAP_SYS_MODULE 16
/* Allow ioperm/iopl access */
/* Allow sending USB messages to any device via /proc/bus/usb */
#define CAP_SYS_RAWIO 17
/* Allow use of chroot() */
#define CAP_SYS_CHROOT 18
/* Allow ptrace() of any process */
#define CAP_SYS_PTRACE 19
/* Allow configuration of process accounting */
#define CAP_SYS_PACCT 20
/* Allow configuration of the secure attention key */
/* Allow administration of the random device */
/* Allow examination and configuration of disk quotas */
/* Allow setting the domainname */
/* Allow setting the hostname */
/* Allow calling bdflush() */
/* Allow mount() and umount(), setting up new smb connection */
/* Allow some autofs root ioctls */
/* Allow nfsservctl */
/* Allow VM86_REQUEST_IRQ */
/* Allow to read/write pci config on alpha */
/* Allow irix_prctl on mips (setstacksize) */
/* Allow flushing all cache on m68k (sys_cacheflush) */
/* Allow removing semaphores */
/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
and shared memory */
/* Allow locking/unlocking of shared memory segment */
/* Allow turning swap on/off */
/* Allow forged pids on socket credentials passing */
/* Allow setting readahead and flushing buffers on block devices */
/* Allow setting geometry in floppy driver */
/* Allow turning DMA on/off in xd driver */
/* Allow administration of md devices (mostly the above, but some
extra ioctls) */
/* Allow tuning the ide driver */
/* Allow access to the nvram device */
/* Allow administration of apm_bios, serial and bttv (TV) device */
/* Allow manufacturer commands in isdn CAPI support driver */
/* Allow reading non-standardized portions of pci configuration space */
/* Allow DDI debug ioctl on sbpcd driver */
/* Allow setting up serial ports */
/* Allow sending raw qic-117 commands */
/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
arbitrary SCSI commands */
/* Allow setting encryption key on loopback filesystem */
/* Allow setting zone reclaim policy */
#define CAP_SYS_ADMIN 21
/* Allow use of reboot() */
#define CAP_SYS_BOOT 22
/* Allow raising priority and setting priority on other (different
UID) processes */
/* Allow use of FIFO and round-robin (realtime) scheduling on own
processes and setting the scheduling algorithm used by another
process. */
/* Allow setting cpu affinity on other processes */
#define CAP_SYS_NICE 23
/* Override resource limits. Set resource limits. */
/* Override quota limits. */
/* Override reserved space on ext2 filesystem */
/* Modify data journaling mode on ext3 filesystem (uses journaling
resources) */
/* NOTE: ext2 honors fsuid when checking for resource overrides, so
you can override using fsuid too */
/* Override size restrictions on IPC message queues */
/* Allow more than 64hz interrupts from the real-time clock */
/* Override max number of consoles on console allocation */
/* Override max number of keymaps */
#define CAP_SYS_RESOURCE 24
/* Allow manipulation of system clock */
/* Allow irix_stime on mips */
/* Allow setting the real-time clock */
#define CAP_SYS_TIME 25
/* Allow configuration of tty devices */
/* Allow vhangup() of tty */
#define CAP_SYS_TTY_CONFIG 26
/* Allow the privileged aspects of mknod() */
#define CAP_MKNOD 27
/* Allow taking of leases on files */
#define CAP_LEASE 28
#define CAP_AUDIT_WRITE 29
#define CAP_AUDIT_CONTROL 30
#define CAP_SETFCAP 31
/* Override MAC access.
The base kernel enforces no MAC policy.
An LSM may enforce a MAC policy, and if it does and it chooses
to implement capability based overrides of that policy, this is
the capability it should use to do so. */
#define CAP_MAC_OVERRIDE 32
/* Allow MAC configuration or state changes.
The base kernel requires no MAC configuration.
An LSM may enforce a MAC policy, and if it does and it chooses
to implement capability based checks on modifications to that
policy or the data required to maintain it, this is the
capability it should use to do so. */
#define CAP_MAC_ADMIN 33
/* Allow configuring the kernel's syslog (printk behaviour) */
#define CAP_SYSLOG 34
/* Allow triggering something that will wake the system */
#define CAP_WAKE_ALARM 35
/* Allow preventing system suspends */
#define CAP_BLOCK_SUSPEND 36
#define CAP_LAST_CAP CAP_BLOCK_SUSPEND
#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
/*
* Bit location of each capability (used by user-space library and kernel)
*/
#define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */
#define CAP_TO_MASK(x) (1 << ((x) & 31)) /* mask for indexed __u32 */
#ifdef __KERNEL__
struct inode;
struct dentry;
......@@ -557,6 +215,4 @@ extern bool inode_capable(const struct inode *inode, int cap);
/* audit system wants to get cap info from files as well */
extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
#endif /* __KERNEL__ */
#endif /* !_LINUX_CAPABILITY_H */
include/linux/cciss_ioctl.h
浏览文件 @ 0b381a28
#ifndef CCISS_IOCTLH
#define CCISS_IOCTLH
#include <linux/types.h>
#include <linux/ioctl.h>
#include <linux/cciss_defs.h>
#include <uapi/linux/cciss_ioctl.h>
#define CCISS_IOC_MAGIC 'B'
typedef struct _cciss_pci_info_struct
{
unsigned char bus;
unsigned char dev_fn;
unsigned short domain;
__u32 board_id;
} cciss_pci_info_struct;
typedef struct _cciss_coalint_struct
{
__u32 delay;
__u32 count;
} cciss_coalint_struct;
typedef char NodeName_type[16];
typedef __u32 Heartbeat_type;
#define CISS_PARSCSIU2 0x0001
#define CISS_PARCSCIU3 0x0002
#define CISS_FIBRE1G 0x0100
#define CISS_FIBRE2G 0x0200
typedef __u32 BusTypes_type;
typedef char FirmwareVer_type[4];
typedef __u32 DriverVer_type;
#define MAX_KMALLOC_SIZE 128000
typedef struct _IOCTL_Command_struct {
LUNAddr_struct LUN_info;
RequestBlock_struct Request;
ErrorInfo_struct error_info;
WORD buf_size; /* size in bytes of the buf */
BYTE __user *buf;
} IOCTL_Command_struct;
typedef struct _BIG_IOCTL_Command_struct {
LUNAddr_struct LUN_info;
RequestBlock_struct Request;
ErrorInfo_struct error_info;
DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
DWORD buf_size; /* size in bytes of the buf */
/* < malloc_size * MAXSGENTRIES */
BYTE __user *buf;
} BIG_IOCTL_Command_struct;
typedef struct _LogvolInfo_struct{
__u32 LunID;
int num_opens; /* number of opens on the logical volume */
int num_parts; /* number of partitions configured on logvol */
} LogvolInfo_struct;
#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
#define CCISS_GETBUSTYPES _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
#define CCISS_GETFIRMVER _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
#define CCISS_GETDRIVVER _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
#define CCISS_REVALIDVOLS _IO(CCISS_IOC_MAGIC, 10)
#define CCISS_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
#define CCISS_DEREGDISK _IO(CCISS_IOC_MAGIC, 12)
/* no longer used... use REGNEWD instead */
#define CCISS_REGNEWDISK _IOW(CCISS_IOC_MAGIC, 13, int)
#define CCISS_REGNEWD _IO(CCISS_IOC_MAGIC, 14)
#define CCISS_RESCANDISK _IO(CCISS_IOC_MAGIC, 16)
#define CCISS_GETLUNINFO _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
/* 32 bit compatible ioctl structs */
......@@ -111,5 +28,4 @@ typedef struct _BIG_IOCTL32_Command_struct {
#define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
#endif /* CONFIG_COMPAT */
#endif /* __KERNEL__ */
#endif
include/linux/cdrom.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/cm4000_cs.h
浏览文件 @ 0b381a28
#ifndef _CM4000_H_
#define _CM4000_H_
#include <linux/types.h>
#include <uapi/linux/cm4000_cs.h>
#define MAX_ATR 33
#define CM4000_MAX_DEV 4
/* those two structures are passed via ioctl() from/to userspace. They are
* used by existing userspace programs, so I kepth the awkward "bIFSD" naming
* not to break compilation of userspace apps. -HW */
typedef struct atreq {
__s32 atr_len;
unsigned char atr[64];
__s32 power_act;
unsigned char bIFSD;
unsigned char bIFSC;
} atreq_t;
/* what is particularly stupid in the original driver is the arch-dependent
* member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
* will lay out the structure members differently than the 64bit kernel.
*
* I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
* On 32bit this will make no difference. With 64bit kernels, it will make
* 32bit apps work, too.
*/
typedef struct ptsreq {
__u32 protocol; /*T=0: 2^0, T=1: 2^1*/
unsigned char flags;
unsigned char pts1;
unsigned char pts2;
unsigned char pts3;
} ptsreq_t;
#define CM_IOC_MAGIC 'c'
#define CM_IOC_MAXNR 255
#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *)
#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *)
#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3)
#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4)
#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*)
/* card and device states */
#define CM_CARD_INSERTED 0x01
#define CM_CARD_POWERED 0x02
#define CM_ATR_PRESENT 0x04
#define CM_ATR_VALID 0x08
#define CM_STATE_VALID 0x0f
/* extra info only from CM4000 */
#define CM_NO_READER 0x10
#define CM_BAD_CARD 0x20
#ifdef __KERNEL__
#define DEVICE_NAME "cmm"
#define MODULE_NAME "cm4000_cs"
#endif /* __KERNEL__ */
#endif /* _CM4000_H_ */
include/linux/cn_proc.h
浏览文件 @ 0b381a28
......@@ -14,111 +14,11 @@
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*/
#ifndef CN_PROC_H
#define CN_PROC_H
#include <linux/types.h>
/*
* Userspace sends this enum to register with the kernel that it is listening
* for events on the connector.
*/
enum proc_cn_mcast_op {
PROC_CN_MCAST_LISTEN = 1,
PROC_CN_MCAST_IGNORE = 2
};
/*
* From the user's point of view, the process
* ID is the thread group ID and thread ID is the internal
* kernel "pid". So, fields are assigned as follow:
*
* In user space - In kernel space
*
* parent process ID = parent->tgid
* parent thread ID = parent->pid
* child process ID = child->tgid
* child thread ID = child->pid
*/
struct proc_event {
enum what {
/* Use successive bits so the enums can be used to record
* sets of events as well
*/
PROC_EVENT_NONE = 0x00000000,
PROC_EVENT_FORK = 0x00000001,
PROC_EVENT_EXEC = 0x00000002,
PROC_EVENT_UID = 0x00000004,
PROC_EVENT_GID = 0x00000040,
PROC_EVENT_SID = 0x00000080,
PROC_EVENT_PTRACE = 0x00000100,
PROC_EVENT_COMM = 0x00000200,
/* "next" should be 0x00000400 */
/* "last" is the last process event: exit */
PROC_EVENT_EXIT = 0x80000000
} what;
__u32 cpu;
__u64 __attribute__((aligned(8))) timestamp_ns;
/* Number of nano seconds since system boot */
union { /* must be last field of proc_event struct */
struct {
__u32 err;
} ack;
struct fork_proc_event {
__kernel_pid_t parent_pid;
__kernel_pid_t parent_tgid;
__kernel_pid_t child_pid;
__kernel_pid_t child_tgid;
} fork;
struct exec_proc_event {
__kernel_pid_t process_pid;
__kernel_pid_t process_tgid;
} exec;
struct id_proc_event {
__kernel_pid_t process_pid;
__kernel_pid_t process_tgid;
union {
__u32 ruid; /* task uid */
__u32 rgid; /* task gid */
} r;
union {
__u32 euid;
__u32 egid;
} e;
} id;
struct sid_proc_event {
__kernel_pid_t process_pid;
__kernel_pid_t process_tgid;
} sid;
struct ptrace_proc_event {
__kernel_pid_t process_pid;
__kernel_pid_t process_tgid;
__kernel_pid_t tracer_pid;
__kernel_pid_t tracer_tgid;
} ptrace;
struct comm_proc_event {
__kernel_pid_t process_pid;
__kernel_pid_t process_tgid;
char comm[16];
} comm;
struct exit_proc_event {
__kernel_pid_t process_pid;
__kernel_pid_t process_tgid;
__u32 exit_code, exit_signal;
} exit;
} event_data;
};
#include <uapi/linux/cn_proc.h>
#ifdef __KERNEL__
#ifdef CONFIG_PROC_EVENTS
void proc_fork_connector(struct task_struct *task);
void proc_exec_connector(struct task_struct *task);
......@@ -151,5 +51,4 @@ static inline void proc_ptrace_connector(struct task_struct *task,
static inline void proc_exit_connector(struct task_struct *task)
{}
#endif /* CONFIG_PROC_EVENTS */
#endif /* __KERNEL__ */
#endif /* CN_PROC_H */
include/linux/coda.h
浏览文件 @ 0b381a28
......@@ -55,690 +55,12 @@ Mellon the rights to redistribute these changes without encumbrance.
* Linux modifications by
* Peter Braam, Aug 1996
*/
#ifndef _CODA_HEADER_
#define _CODA_HEADER_
/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
#if defined(__NetBSD__) || \
((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
#include <sys/types.h>
#endif
#ifndef CODA_MAXSYMLINKS
#define CODA_MAXSYMLINKS 10
#endif
#if defined(DJGPP) || defined(__CYGWIN32__)
#ifdef KERNEL
typedef unsigned long u_long;
typedef unsigned int u_int;
typedef unsigned short u_short;
typedef u_long ino_t;
typedef u_long dev_t;
typedef void * caddr_t;
#ifdef DOS
typedef unsigned __int64 u_quad_t;
#else
typedef unsigned long long u_quad_t;
#endif
#define inline
struct timespec {
long ts_sec;
long ts_nsec;
};
#else /* DJGPP but not KERNEL */
#include <sys/time.h>
typedef unsigned long long u_quad_t;
#endif /* !KERNEL */
#endif /* !DJGPP */
#if defined(__linux__)
#include <linux/time.h>
#define cdev_t u_quad_t
#ifndef __KERNEL__
#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
#define _UQUAD_T_ 1
typedef unsigned long long u_quad_t;
#endif
#else /*__KERNEL__ */
typedef unsigned long long u_quad_t;
#endif /* __KERNEL__ */
#else
#define cdev_t dev_t
#endif
#ifdef __CYGWIN32__
struct timespec {
time_t tv_sec; /* seconds */
long tv_nsec; /* nanoseconds */
};
#endif
#ifndef __BIT_TYPES_DEFINED__
#define __BIT_TYPES_DEFINED__
typedef signed char int8_t;
typedef unsigned char u_int8_t;
typedef short int16_t;
typedef unsigned short u_int16_t;
typedef int int32_t;
typedef unsigned int u_int32_t;
#endif
/*
* Cfs constants
*/
#define CODA_MAXNAMLEN 255
#define CODA_MAXPATHLEN 1024
#define CODA_MAXSYMLINK 10
/* these are Coda's version of O_RDONLY etc combinations
* to deal with VFS open modes
*/
#define C_O_READ 0x001
#define C_O_WRITE 0x002
#define C_O_TRUNC 0x010
#define C_O_EXCL 0x100
#define C_O_CREAT 0x200
/* these are to find mode bits in Venus */
#define C_M_READ 00400
#define C_M_WRITE 00200
/* for access Venus will use */
#define C_A_C_OK 8 /* Test for writing upon create. */
#define C_A_R_OK 4 /* Test for read permission. */
#define C_A_W_OK 2 /* Test for write permission. */
#define C_A_X_OK 1 /* Test for execute permission. */
#define C_A_F_OK 0 /* Test for existence. */
#ifndef _VENUS_DIRENT_T_
#define _VENUS_DIRENT_T_ 1
struct venus_dirent {
u_int32_t d_fileno; /* file number of entry */
u_int16_t d_reclen; /* length of this record */
u_int8_t d_type; /* file type, see below */
u_int8_t d_namlen; /* length of string in d_name */
char d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
};
#undef DIRSIZ
#define DIRSIZ(dp) ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
(((dp)->d_namlen+1 + 3) &~ 3))
/*
* File types
*/
#define CDT_UNKNOWN 0
#define CDT_FIFO 1
#define CDT_CHR 2
#define CDT_DIR 4
#define CDT_BLK 6
#define CDT_REG 8
#define CDT_LNK 10
#define CDT_SOCK 12
#define CDT_WHT 14
/*
* Convert between stat structure types and directory types.
*/
#define IFTOCDT(mode) (((mode) & 0170000) >> 12)
#define CDTTOIF(dirtype) ((dirtype) << 12)
#endif
#ifndef _VUID_T_
#define _VUID_T_
typedef u_int32_t vuid_t;
typedef u_int32_t vgid_t;
#endif /*_VUID_T_ */
struct CodaFid {
u_int32_t opaque[4];
};
#define coda_f2i(fid)\
(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
#ifndef _VENUS_VATTR_T_
#define _VENUS_VATTR_T_
/*
* Vnode types. VNON means no type.
*/
enum coda_vtype { C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
struct coda_vattr {
long va_type; /* vnode type (for create) */
u_short va_mode; /* files access mode and type */
short va_nlink; /* number of references to file */
vuid_t va_uid; /* owner user id */
vgid_t va_gid; /* owner group id */
long va_fileid; /* file id */
u_quad_t va_size; /* file size in bytes */
long va_blocksize; /* blocksize preferred for i/o */
struct timespec va_atime; /* time of last access */
struct timespec va_mtime; /* time of last modification */
struct timespec va_ctime; /* time file changed */
u_long va_gen; /* generation number of file */
u_long va_flags; /* flags defined for file */
cdev_t va_rdev; /* device special file represents */
u_quad_t va_bytes; /* bytes of disk space held by file */
u_quad_t va_filerev; /* file modification number */
};
#include <uapi/linux/coda.h>
#endif
/* structure used by CODA_STATFS for getting cache information from venus */
struct coda_statfs {
int32_t f_blocks;
int32_t f_bfree;
int32_t f_bavail;
int32_t f_files;
int32_t f_ffree;
};
/*
* Kernel <--> Venus communications.
*/
#define CODA_ROOT 2
#define CODA_OPEN_BY_FD 3
#define CODA_OPEN 4
#define CODA_CLOSE 5
#define CODA_IOCTL 6
#define CODA_GETATTR 7
#define CODA_SETATTR 8
#define CODA_ACCESS 9
#define CODA_LOOKUP 10
#define CODA_CREATE 11
#define CODA_REMOVE 12
#define CODA_LINK 13
#define CODA_RENAME 14
#define CODA_MKDIR 15
#define CODA_RMDIR 16
#define CODA_SYMLINK 18
#define CODA_READLINK 19
#define CODA_FSYNC 20
#define CODA_VGET 22
#define CODA_SIGNAL 23
#define CODA_REPLACE 24 /* DOWNCALL */
#define CODA_FLUSH 25 /* DOWNCALL */
#define CODA_PURGEUSER 26 /* DOWNCALL */
#define CODA_ZAPFILE 27 /* DOWNCALL */
#define CODA_ZAPDIR 28 /* DOWNCALL */
#define CODA_PURGEFID 30 /* DOWNCALL */
#define CODA_OPEN_BY_PATH 31
#define CODA_RESOLVE 32
#define CODA_REINTEGRATE 33
#define CODA_STATFS 34
#define CODA_STORE 35
#define CODA_RELEASE 36
#define CODA_NCALLS 37
#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
#define VC_MAXDATASIZE 8192
#define VC_MAXMSGSIZE sizeof(union inputArgs)+sizeof(union outputArgs) +\
VC_MAXDATASIZE
#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
/*
* Venus <-> Coda RPC arguments
*/
struct coda_in_hdr {
u_int32_t opcode;
u_int32_t unique; /* Keep multiple outstanding msgs distinct */
pid_t pid;
pid_t pgid;
vuid_t uid;
};
/* Really important that opcode and unique are 1st two fields! */
struct coda_out_hdr {
u_int32_t opcode;
u_int32_t unique;
u_int32_t result;
};
/* coda_root: NO_IN */
struct coda_root_out {
struct coda_out_hdr oh;
struct CodaFid VFid;
};
struct coda_root_in {
struct coda_in_hdr in;
};
/* coda_open: */
struct coda_open_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int flags;
};
struct coda_open_out {
struct coda_out_hdr oh;
cdev_t dev;
ino_t inode;
};
/* coda_store: */
struct coda_store_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int flags;
};
struct coda_store_out {
struct coda_out_hdr out;
};
/* coda_release: */
struct coda_release_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int flags;
};
struct coda_release_out {
struct coda_out_hdr out;
};
/* coda_close: */
struct coda_close_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int flags;
};
struct coda_close_out {
struct coda_out_hdr out;
};
/* coda_ioctl: */
struct coda_ioctl_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int cmd;
int len;
int rwflag;
char *data; /* Place holder for data. */
};
struct coda_ioctl_out {
struct coda_out_hdr oh;
int len;
caddr_t data; /* Place holder for data. */
};
/* coda_getattr: */
struct coda_getattr_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
};
struct coda_getattr_out {
struct coda_out_hdr oh;
struct coda_vattr attr;
};
/* coda_setattr: NO_OUT */
struct coda_setattr_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
struct coda_vattr attr;
};
struct coda_setattr_out {
struct coda_out_hdr out;
};
/* coda_access: NO_OUT */
struct coda_access_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int flags;
};
struct coda_access_out {
struct coda_out_hdr out;
};
/* lookup flags */
#define CLU_CASE_SENSITIVE 0x01
#define CLU_CASE_INSENSITIVE 0x02
/* coda_lookup: */
struct coda_lookup_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int name; /* Place holder for data. */
int flags;
};
struct coda_lookup_out {
struct coda_out_hdr oh;
struct CodaFid VFid;
int vtype;
};
/* coda_create: */
struct coda_create_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
struct coda_vattr attr;
int excl;
int mode;
int name; /* Place holder for data. */
};
struct coda_create_out {
struct coda_out_hdr oh;
struct CodaFid VFid;
struct coda_vattr attr;
};
/* coda_remove: NO_OUT */
struct coda_remove_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int name; /* Place holder for data. */
};
struct coda_remove_out {
struct coda_out_hdr out;
};
/* coda_link: NO_OUT */
struct coda_link_in {
struct coda_in_hdr ih;
struct CodaFid sourceFid; /* cnode to link *to* */
struct CodaFid destFid; /* Directory in which to place link */
int tname; /* Place holder for data. */
};
struct coda_link_out {
struct coda_out_hdr out;
};
/* coda_rename: NO_OUT */
struct coda_rename_in {
struct coda_in_hdr ih;
struct CodaFid sourceFid;
int srcname;
struct CodaFid destFid;
int destname;
};
struct coda_rename_out {
struct coda_out_hdr out;
};
/* coda_mkdir: */
struct coda_mkdir_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
struct coda_vattr attr;
int name; /* Place holder for data. */
};
struct coda_mkdir_out {
struct coda_out_hdr oh;
struct CodaFid VFid;
struct coda_vattr attr;
};
/* coda_rmdir: NO_OUT */
struct coda_rmdir_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int name; /* Place holder for data. */
};
struct coda_rmdir_out {
struct coda_out_hdr out;
};
/* coda_symlink: NO_OUT */
struct coda_symlink_in {
struct coda_in_hdr ih;
struct CodaFid VFid; /* Directory to put symlink in */
int srcname;
struct coda_vattr attr;
int tname;
};
struct coda_symlink_out {
struct coda_out_hdr out;
};
/* coda_readlink: */
struct coda_readlink_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
};
struct coda_readlink_out {
struct coda_out_hdr oh;
int count;
caddr_t data; /* Place holder for data. */
};
/* coda_fsync: NO_OUT */
struct coda_fsync_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
};
struct coda_fsync_out {
struct coda_out_hdr out;
};
/* coda_vget: */
struct coda_vget_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
};
struct coda_vget_out {
struct coda_out_hdr oh;
struct CodaFid VFid;
int vtype;
};
/* CODA_SIGNAL is out-of-band, doesn't need data. */
/* CODA_INVALIDATE is a venus->kernel call */
/* CODA_FLUSH is a venus->kernel call */
/* coda_purgeuser: */
/* CODA_PURGEUSER is a venus->kernel call */
struct coda_purgeuser_out {
struct coda_out_hdr oh;
vuid_t uid;
};
/* coda_zapfile: */
/* CODA_ZAPFILE is a venus->kernel call */
struct coda_zapfile_out {
struct coda_out_hdr oh;
struct CodaFid CodaFid;
};
/* coda_zapdir: */
/* CODA_ZAPDIR is a venus->kernel call */
struct coda_zapdir_out {
struct coda_out_hdr oh;
struct CodaFid CodaFid;
};
/* coda_purgefid: */
/* CODA_PURGEFID is a venus->kernel call */
struct coda_purgefid_out {
struct coda_out_hdr oh;
struct CodaFid CodaFid;
};
/* coda_replace: */
/* CODA_REPLACE is a venus->kernel call */
struct coda_replace_out { /* coda_replace is a venus->kernel call */
struct coda_out_hdr oh;
struct CodaFid NewFid;
struct CodaFid OldFid;
};
/* coda_open_by_fd: */
struct coda_open_by_fd_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int flags;
};
struct coda_open_by_fd_out {
struct coda_out_hdr oh;
int fd;
#ifdef __KERNEL__
struct file *fh; /* not passed from userspace but used in-kernel only */
#endif
};
/* coda_open_by_path: */
struct coda_open_by_path_in {
struct coda_in_hdr ih;
struct CodaFid VFid;
int flags;
};
struct coda_open_by_path_out {
struct coda_out_hdr oh;
int path;
};
/* coda_statfs: NO_IN */
struct coda_statfs_in {
struct coda_in_hdr in;
};
struct coda_statfs_out {
struct coda_out_hdr oh;
struct coda_statfs stat;
};
/*
* Occasionally, we don't cache the fid returned by CODA_LOOKUP.
* For instance, if the fid is inconsistent.
* This case is handled by setting the top bit of the type result parameter.
*/
#define CODA_NOCACHE 0x80000000
union inputArgs {
struct coda_in_hdr ih; /* NB: every struct below begins with an ih */
struct coda_open_in coda_open;
struct coda_store_in coda_store;
struct coda_release_in coda_release;
struct coda_close_in coda_close;
struct coda_ioctl_in coda_ioctl;
struct coda_getattr_in coda_getattr;
struct coda_setattr_in coda_setattr;
struct coda_access_in coda_access;
struct coda_lookup_in coda_lookup;
struct coda_create_in coda_create;
struct coda_remove_in coda_remove;
struct coda_link_in coda_link;
struct coda_rename_in coda_rename;
struct coda_mkdir_in coda_mkdir;
struct coda_rmdir_in coda_rmdir;
struct coda_symlink_in coda_symlink;
struct coda_readlink_in coda_readlink;
struct coda_fsync_in coda_fsync;
struct coda_vget_in coda_vget;
struct coda_open_by_fd_in coda_open_by_fd;
struct coda_open_by_path_in coda_open_by_path;
struct coda_statfs_in coda_statfs;
};
union outputArgs {
struct coda_out_hdr oh; /* NB: every struct below begins with an oh */
struct coda_root_out coda_root;
struct coda_open_out coda_open;
struct coda_ioctl_out coda_ioctl;
struct coda_getattr_out coda_getattr;
struct coda_lookup_out coda_lookup;
struct coda_create_out coda_create;
struct coda_mkdir_out coda_mkdir;
struct coda_readlink_out coda_readlink;
struct coda_vget_out coda_vget;
struct coda_purgeuser_out coda_purgeuser;
struct coda_zapfile_out coda_zapfile;
struct coda_zapdir_out coda_zapdir;
struct coda_purgefid_out coda_purgefid;
struct coda_replace_out coda_replace;
struct coda_open_by_fd_out coda_open_by_fd;
struct coda_open_by_path_out coda_open_by_path;
struct coda_statfs_out coda_statfs;
};
union coda_downcalls {
/* CODA_INVALIDATE is a venus->kernel call */
/* CODA_FLUSH is a venus->kernel call */
struct coda_purgeuser_out purgeuser;
struct coda_zapfile_out zapfile;
struct coda_zapdir_out zapdir;
struct coda_purgefid_out purgefid;
struct coda_replace_out replace;
};
/*
* Used for identifying usage of "Control" and pioctls
*/
#define PIOCPARM_MASK 0x0000ffff
struct ViceIoctl {
void __user *in; /* Data to be transferred in */
void __user *out; /* Data to be transferred out */
u_short in_size; /* Size of input buffer <= 2K */
u_short out_size; /* Maximum size of output buffer, <= 2K */
};
struct PioctlData {
const char __user *path;
int follow;
struct ViceIoctl vi;
};
#define CODA_CONTROL ".CONTROL"
#define CODA_CONTROLLEN 8
#define CTL_INO -1
/* Data passed to mount */
#define CODA_MOUNT_VERSION 1
struct coda_mount_data {
int version;
int fd; /* Opened device */
};
#endif
include/linux/coda_psdev.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/connector.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/cramfs_fs.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/cuda.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/cyclades.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/dccp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/dlm.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/dlm_plock.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/edd.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/elf.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/elfcore.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/errno.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/errqueue.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/ethtool.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/eventpoll.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/falloc.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/fanotify.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/fb.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/fcntl.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/fd.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/filter.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/flat.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/fs.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/fsl_hypervisor.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/futex.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/gameport.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/genetlink.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/hdlc.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/hdlcdrv.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/hid.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/hiddev.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/hidraw.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/hpet.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/i2c-dev.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/i2c.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/icmp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/icmpv6.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_arp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_bridge.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_eql.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_ether.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_fddi.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_frad.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_link.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_ltalk.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_phonet.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_pppol2tp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_pppox.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_team.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_tun.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_tunnel.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/if_vlan.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/igmp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/in.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/in6.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/inet_diag.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/inotify.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/input.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/ip.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/ipc.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/ipmi.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/ipv6.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/ipv6_route.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/irqnr.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/isdn.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/isdn_divertif.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/isdn_ppp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/isdnif.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/joystick.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/kd.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/kdev_t.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/kernel-page-flags.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/kernel.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/kernelcapi.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/kexec.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/keyboard.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/kvm_para.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/l2tp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/llc.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/loop.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/lp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/mdio.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/mempolicy.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/mii.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/mman.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/mroute.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/mroute6.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/msdos_fs.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/msg.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/n_r3964.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/nbd.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/net.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/netdevice.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/netfilter.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/netfilter_bridge.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/netfilter_ipv4.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/netfilter_ipv6.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/netlink.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/nfs.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/nfs3.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/nfs4.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/nfs_fs.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/nfs_idmap.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/nfsacl.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/nubus.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/nvram.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/omapfb.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/oom.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/parport.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/patchkey.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/pci.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/perf_event.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/personality.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/phonet.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/pktcdvd.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/pmu.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/poll.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/ppp-comp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/ppp_defs.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/ptrace.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/quota.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/random.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/reboot.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/resource.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/rfkill.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/rtc.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/rtnetlink.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/scc.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/sched.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/screen_info.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/sdla.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/seccomp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/securebits.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/sem.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/serial.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/serial_core.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/serio.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/shm.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/signal.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/signalfd.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/sock_diag.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/socket.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/sonet.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/sonypi.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/sound.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/soundcard.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/stat.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/stddef.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/string.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/swab.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/synclink.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/sysctl.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/tcp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/time.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/timex.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/toshiba.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/tty.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/types.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/udp.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/uinput.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/uio.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/usbdevice_fs.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/utsname.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/uuid.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/vfio.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/videodev2.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/virtio_config.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/virtio_console.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/virtio_ring.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/vt.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/wait.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/wanrouter.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/watchdog.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/wireless.h
浏览文件 @ 0b381a28
此差异已折叠。
include/linux/xattr.h
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/Kbuild
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/a.out.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/acct.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/adb.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/adfs_fs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/agpgart.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/apm_bios.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/atalk.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/atm.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/atm_tcp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/atmdev.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/audit.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/auto_fs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/auxvec.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/binfmts.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/blktrace_api.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/bsg.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/byteorder/Kbuild
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/byteorder/big_endian.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/byteorder/little_endian.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/capability.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/cciss_ioctl.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/cdrom.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/cm4000_cs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/cn_proc.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/coda.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/coda_psdev.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/connector.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/cramfs_fs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/cuda.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/cyclades.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/dccp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/dlm.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/dlm_plock.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/edd.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/elf.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/elfcore.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/errno.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/errqueue.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/ethtool.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/eventpoll.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/falloc.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/fanotify.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/fb.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/fcntl.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/fd.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/filter.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/flat.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/fs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/fsl_hypervisor.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/futex.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/gameport.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/genetlink.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/hdlc.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/hdlcdrv.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/hid.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/hiddev.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/hidraw.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/hpet.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/i2c-dev.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/i2c.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/icmp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/icmpv6.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_arp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_bridge.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_eql.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_ether.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_fddi.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_frad.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_link.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_ltalk.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_phonet.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_pppol2tp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_pppox.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_team.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_tun.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_tunnel.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/if_vlan.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/igmp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/in.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/in6.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/inet_diag.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/inotify.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/input.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/ip.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/ipc.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/ipmi.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/ipv6.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/ipv6_route.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/isdn.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/isdn_divertif.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/isdn_ppp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/isdnif.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/joystick.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/kd.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/kdev_t.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/kernel-page-flags.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/kernel.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/kernelcapi.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/kexec.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/keyboard.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/kvm_para.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/l2tp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/llc.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/loop.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/lp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/mdio.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/mempolicy.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/mii.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/mman.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/mroute.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/mroute6.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/msdos_fs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/msg.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/n_r3964.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/nbd.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/net.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/netdevice.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/netfilter.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/netfilter_bridge.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/netfilter_ipv4.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/netfilter_ipv6.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/netlink.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/nfs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/nfs3.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/nfs4.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/nfs_fs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/nfs_idmap.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/nfsacl.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/nubus.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/nvram.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/omapfb.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/oom.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/parport.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/patchkey.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/pci.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/perf_event.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/personality.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/phonet.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/pktcdvd.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/pmu.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/poll.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/ppp-comp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/ppp_defs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/ptrace.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/quota.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/random.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/reboot.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/resource.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/rfkill.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/rtc.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/rtnetlink.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/scc.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/sched.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/screen_info.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/sdla.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/seccomp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/securebits.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/sem.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/serial.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/serial_core.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/serio.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/shm.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/signal.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/signalfd.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/sock_diag.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/socket.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/sonet.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/sonypi.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/sound.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/soundcard.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/stat.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/stddef.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/string.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/swab.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/synclink.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/sysctl.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/tcp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/time.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/timex.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/toshiba.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/tty.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/types.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/udp.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/uinput.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/uio.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/usbdevice_fs.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/utsname.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/uuid.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/vfio.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/videodev2.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/virtio_config.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/virtio_console.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/virtio_ring.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/vt.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/wait.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/wanrouter.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/watchdog.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/wireless.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
include/uapi/linux/xattr.h 0 → 100644
浏览文件 @ 0b381a28
此差异已折叠。
tools/vm/page-types.c
浏览文件 @ 0b381a28
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或