提交 0b0cefc8 编写于 作者: O Oder Chiou 提交者: Mark Brown

ASoC: rt5645: change gpio to gpiod APIs

Move gpio to gpio_desc and use gpiod APIs in codec driver.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 5ae4f63b
......@@ -20,9 +20,6 @@ struct rt5645_platform_data {
unsigned int dmic2_data_pin;
/* 0 = IN2P; 1 = GPIO6; 2 = GPIO10; 3 = GPIO12 */
unsigned int hp_det_gpio;
bool gpio_hp_det_active_high;
unsigned int jd_mode;
};
......
......@@ -2944,17 +2944,11 @@ static int rt5645_irq_detection(struct rt5645_priv *rt5645)
switch (rt5645->pdata.jd_mode) {
case 0: /* Not using rt5645 JD */
if (gpio_is_valid(rt5645->pdata.hp_det_gpio)) {
gpio_state = gpio_get_value(rt5645->pdata.hp_det_gpio);
dev_dbg(rt5645->codec->dev, "gpio = %d(%d)\n",
rt5645->pdata.hp_det_gpio, gpio_state);
}
if ((rt5645->pdata.gpio_hp_det_active_high && gpio_state) ||
(!rt5645->pdata.gpio_hp_det_active_high &&
!gpio_state)) {
report = rt5645_jack_detect(rt5645->codec, 1);
} else {
report = rt5645_jack_detect(rt5645->codec, 0);
if (rt5645->gpiod_hp_det) {
gpio_state = gpiod_get_value(rt5645->gpiod_hp_det);
dev_dbg(rt5645->codec->dev, "gpio_state = %d\n",
gpio_state);
report = rt5645_jack_detect(rt5645->codec, gpio_state);
}
snd_soc_jack_report(rt5645->hp_jack,
report, SND_JACK_HEADPHONE);
......@@ -3244,7 +3238,6 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
struct rt5645_priv *rt5645;
int ret;
unsigned int val;
struct gpio_desc *gpiod;
rt5645 = devm_kzalloc(&i2c->dev, sizeof(struct rt5645_priv),
GFP_KERNEL);
......@@ -3259,19 +3252,16 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
} else {
if (dmi_check_system(dmi_platform_intel_braswell)) {
rt5645->pdata = *rt5645_pdata;
gpiod = devm_gpiod_get_index(&i2c->dev, "rt5645", 0);
if (IS_ERR(gpiod) || gpiod_direction_input(gpiod)) {
rt5645->pdata.hp_det_gpio = -1;
dev_err(&i2c->dev, "failed to initialize gpiod\n");
} else {
rt5645->pdata.hp_det_gpio = desc_to_gpio(gpiod);
rt5645->pdata.gpio_hp_det_active_high
= !gpiod_is_active_low(gpiod);
}
}
}
rt5645->gpiod_hp_det = devm_gpiod_get(&i2c->dev, "hp-detect", GPIOD_IN);
if (IS_ERR(rt5645->gpiod_hp_det)) {
rt5645->gpiod_hp_det = NULL;
dev_err(&i2c->dev, "failed to initialize gpiod\n");
}
rt5645->regmap = devm_regmap_init_i2c(i2c, &rt5645_regmap);
if (IS_ERR(rt5645->regmap)) {
ret = PTR_ERR(rt5645->regmap);
......@@ -3433,16 +3423,6 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
}
if (gpio_is_valid(rt5645->pdata.hp_det_gpio)) {
ret = gpio_request(rt5645->pdata.hp_det_gpio, "rt5645");
if (ret)
dev_err(&i2c->dev, "Fail gpio_request hp_det_gpio\n");
ret = gpio_direction_input(rt5645->pdata.hp_det_gpio);
if (ret)
dev_err(&i2c->dev, "Fail gpio_direction hp_det_gpio\n");
}
return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_rt5645,
rt5645_dai, ARRAY_SIZE(rt5645_dai));
}
......@@ -3456,9 +3436,6 @@ static int rt5645_i2c_remove(struct i2c_client *i2c)
cancel_delayed_work_sync(&rt5645->jack_detect_work);
if (gpio_is_valid(rt5645->pdata.hp_det_gpio))
gpio_free(rt5645->pdata.hp_det_gpio);
snd_soc_unregister_codec(&i2c->dev);
return 0;
......
......@@ -2182,6 +2182,7 @@ struct rt5645_priv {
struct rt5645_platform_data pdata;
struct regmap *regmap;
struct i2c_client *i2c;
struct gpio_desc *gpiod_hp_det;
struct snd_soc_jack *hp_jack;
struct snd_soc_jack *mic_jack;
struct snd_soc_jack *btn_jack;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册