提交 0b077fea 编写于 作者: D Don Skidmore 提交者: David S. Miller

ixgbe: add WOL support for SFP+ subdevice

This patch will add wake on LAN support to the dev/sub_dev 10FB 11A9.  This
will also include ixgbe ethtool support for this device.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 c6ecf39a
......@@ -1879,7 +1879,16 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
struct ixgbe_hw *hw = &adapter->hw;
int retval = 1;
/* WOL not supported except for the following */
switch(hw->device_id) {
case IXGBE_DEV_ID_82599_SFP:
/* Only this subdevice supports WOL */
if (hw->subsystem_device_id != IXGBE_SUBDEV_ID_82599_SFP) {
wol->supported = 0;
break;
}
retval = 0;
break;
case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
/* All except this subdevice support WOL */
if (hw->subsystem_device_id ==
......@@ -1887,6 +1896,8 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
wol->supported = 0;
break;
}
retval = 0;
break;
case IXGBE_DEV_ID_82599_KX4:
retval = 0;
break;
......
......@@ -7223,13 +7223,18 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
goto err_sw_init;
switch (pdev->device) {
case IXGBE_DEV_ID_82599_SFP:
/* Only this subdevice supports WOL */
if (pdev->subsystem_device == IXGBE_SUBDEV_ID_82599_SFP)
adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
IXGBE_WUFC_MC | IXGBE_WUFC_BC);
break;
case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
/* All except this subdevice support WOL */
if (pdev->subsystem_device ==
IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) {
adapter->wol = 0;
break;
}
if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
IXGBE_WUFC_MC | IXGBE_WUFC_BC);
break;
case IXGBE_DEV_ID_82599_KX4:
adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
IXGBE_WUFC_MC | IXGBE_WUFC_BC);
......
......@@ -54,6 +54,7 @@
#define IXGBE_DEV_ID_82599_T3_LOM 0x151C
#define IXGBE_DEV_ID_82599_CX4 0x10F9
#define IXGBE_DEV_ID_82599_SFP 0x10FB
#define IXGBE_SUBDEV_ID_82599_SFP 0x11A9
#define IXGBE_DEV_ID_82599_SFP_EM 0x1507
#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC
#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册