i2c-rpx: Remove

This driver has been broken forever. It depends on i2c-algo-8xx which
has never been in the mainline kernel.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Documentation/i2c/summary

@@ -67,7 +67,6 @@ i2c-proc: The /proc/sys/dev/sensors interface for device (client) drivers
 Algorithm drivers
 -----------------
 
-i2c-algo-8xx:    An algorithm for CPM's I2C device in Motorola 8xx processors (NOT BUILT BY DEFAULT)
 i2c-algo-bit:    A bit-banging algorithm
 i2c-algo-pcf:    A PCF 8584 style algorithm
 i2c-algo-ibm_ocp: An algorithm for the I2C device in IBM 4xx processors (NOT BUILT BY DEFAULT)
@@ -81,6 +80,5 @@ i2c-pcf-epp:     PCF8584 on a EPP parallel port (uses i2c-algo-pcf) (NOT mkpatch
 i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit)
 i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT)
 i2c-pport:       Primitive parallel port adapter (uses i2c-algo-bit)
-i2c-rpx:         RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT)
 i2c-velleman:    Velleman K8000 parallel port adapter (uses i2c-algo-bit)
 

drivers/i2c/algos/Kconfig

@@ -34,10 +34,6 @@ config I2C_ALGOPCA
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-algo-pca.
 
-config I2C_ALGO8XX
-	tristate "MPC8xx CPM I2C interface"
-	depends on 8xx
-
 config I2C_ALGO_SGI
 	tristate "I2C SGI interfaces"
 	depends on SGI_IP22 || SGI_IP32 || X86_VISWS

drivers/i2c/busses/Kconfig

@@ -391,11 +391,6 @@ config I2C_PROSAVAGE
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-prosavage.
 
-config I2C_RPXLITE
-	tristate "Embedded Planet RPX Lite/Classic support"
-	depends on RPXLITE || RPXCLASSIC
-	select I2C_ALGO8XX
-
 config I2C_S3C2410
 	tristate "S3C2410 I2C Driver"
 	depends on ARCH_S3C2410

drivers/i2c/busses/Makefile

@@ -36,7 +36,6 @@ obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PROSAVAGE)	+= i2c-prosavage.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
-obj-$(CONFIG_I2C_RPXLITE)	+= i2c-rpx.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
 obj-$(CONFIG_I2C_SAVAGE4)	+= i2c-savage4.o
 obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o

drivers/i2c/busses/i2c-rpx.c

-/*
- * Embedded Planet RPX Lite MPC8xx CPM I2C interface.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
- *
- * moved into proper i2c interface;
- * Brad Parker (brad@heeltoe.com)
- *
- * RPX lite specific parts of the i2c interface
- * Update:  There actually isn't anything RPXLite-specific about this module.
- * This should work for most any 8xx board.  The console messages have been 
- * changed to eliminate RPXLite references.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/stddef.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-8xx.h>
-#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
-
-
-static void
-rpx_iic_init(struct i2c_algo_8xx_data *data)
-{
-	volatile cpm8xx_t *cp;
-	volatile immap_t *immap;
-
-	cp = cpmp;	/* Get pointer to Communication Processor */
-	immap = (immap_t *)IMAP_ADDR;	/* and to internal registers */
-
-	data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-
-	/* Check for and use a microcode relocation patch.
-	*/
-	if ((data->reloc = data->iip->iic_rpbase))
-		data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase];
-		
-	data->i2c = (i2c8xx_t *)&(immap->im_i2c);
-	data->cp = cp;
-
-	/* Initialize Port B IIC pins.
-	*/
-	cp->cp_pbpar |= 0x00000030;
-	cp->cp_pbdir |= 0x00000030;
-	cp->cp_pbodr |= 0x00000030;
-
-	/* Allocate space for two transmit and two receive buffer
-	 * descriptors in the DP ram.
-	 */
-	data->dp_addr = cpm_dpalloc(sizeof(cbd_t) * 4, 8);
-		
-	/* ptr to i2c area */
-	data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c);
-}
-
-static int rpx_install_isr(int irq, void (*func)(void *), void *data)
-{
-	/* install interrupt handler */
-	cpm_install_handler(irq, func, data);
-
-	return 0;
-}
-
-static struct i2c_algo_8xx_data rpx_data = {
-	.setisr = rpx_install_isr
-};
-
-static struct i2c_adapter rpx_ops = {
-	.owner		= THIS_MODULE,
-	.name		= "m8xx",
-	.id		= I2C_HW_MPC8XX_EPON,
-	.algo_data	= &rpx_data,
-};
-
-int __init i2c_rpx_init(void)
-{
-	printk(KERN_INFO "i2c-rpx: i2c MPC8xx driver\n");
-
-	/* reset hardware to sane state */
-	rpx_iic_init(&rpx_data);
-
-	if (i2c_8xx_add_bus(&rpx_ops) < 0) {
-		printk(KERN_ERR "i2c-rpx: Unable to register with I2C\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-void __exit i2c_rpx_exit(void)
-{
-	i2c_8xx_del_bus(&rpx_ops);
-}
-
-MODULE_AUTHOR("Dan Malek <dmalek@jlc.net>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards");
-
-module_init(i2c_rpx_init);
-module_exit(i2c_rpx_exit);