usb: dwc2: gadget: configure fifos from device tree

As fifo size can vary between SOCs, add possibility to configure
them from device tree. Fifo sizes used by the legacy driver will
be used If they are not provided by the device tree.
Tested-by: NRobert Baldyga <r.baldyga@samsung.com>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGregory Herrero <gregory.herrero@intel.com>
Signed-off-by: NMian Yousaf Kaukab <yousaf.kaukab@intel.com>
Reviewed-by: NRobert Baldyga <r.baldyga@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

drivers/usb/dwc2/core.h

@@ -193,6 +193,13 @@ enum dwc2_lx_state {
 	DWC2_L3,	/* Off state */
 };
 
+/*
+ * Gadget periodic tx fifo sizes as used by legacy driver
+ * EP0 is not included
+ */
+#define DWC2_G_P_LEGACY_TX_FIFO_SIZE {256, 256, 256, 256, 768, 768, 768, \
+					   768, 0, 0, 0, 0, 0, 0, 0}
+
 /**
  * struct dwc2_core_params - Parameters for configuring the core
  *
@@ -564,6 +571,9 @@ struct dwc2_hw_params {
  * @last_rst:           Time of last reset
  * @eps:                The endpoints being supplied to the gadget framework
  * @g_using_dma:          Indicate if dma usage is enabled
+ * @g_rx_fifo_sz:         Contains rx fifo size value
+ * @g_np_g_tx_fifo_sz:      Contains Non-Periodic tx fifo size value
+ * @g_tx_fifo_sz:         Contains tx fifo size value per endpoints
  */
 struct dwc2_hsotg {
 	struct device *dev;
@@ -699,6 +709,9 @@ struct dwc2_hsotg {
 	struct s3c_hsotg_ep *eps_in[MAX_EPS_CHANNELS];
 	struct s3c_hsotg_ep *eps_out[MAX_EPS_CHANNELS];
 	u32 g_using_dma;
+	u32 g_rx_fifo_sz;
+	u32 g_np_g_tx_fifo_sz;
+	u32 g_tx_fifo_sz[MAX_EPS_CHANNELS];
 #endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
 };
 

drivers/usb/dwc2/gadget.c

@@ -174,15 +174,14 @@ static void s3c_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
 {
 	unsigned int ep;
 	unsigned int addr;
-	unsigned int size;
 	int timeout;
 	u32 val;
 
-	/* set FIFO sizes to 2048/1024 */
-
-	writel(2048, hsotg->regs + GRXFSIZ);
-	writel((2048 << FIFOSIZE_STARTADDR_SHIFT) |
-		(1024 << FIFOSIZE_DEPTH_SHIFT), hsotg->regs + GNPTXFSIZ);
+	/* set RX/NPTX FIFO sizes */
+	writel(hsotg->g_rx_fifo_sz, hsotg->regs + GRXFSIZ);
+	writel((hsotg->g_rx_fifo_sz << FIFOSIZE_STARTADDR_SHIFT) |
+		(hsotg->g_np_g_tx_fifo_sz << FIFOSIZE_DEPTH_SHIFT),
+		hsotg->regs + GNPTXFSIZ);
 
 	/*
 	 * arange all the rest of the TX FIFOs, as some versions of this
@@ -192,35 +191,21 @@ static void s3c_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
 	 */
 
 	/* start at the end of the GNPTXFSIZ, rounded up */
-	addr = 2048 + 1024;
+	addr = hsotg->g_rx_fifo_sz + hsotg->g_np_g_tx_fifo_sz;
 
 	/*
-	 * Because we have not enough memory to have each TX FIFO of size at
-	 * least 3072 bytes (the maximum single packet size), we create four
-	 * FIFOs of lenght 1024, and four of length 3072 bytes, and assing
+	 * Configure fifos sizes from provided configuration and assign
 	 * them to endpoints dynamically according to maxpacket size value of
 	 * given endpoint.
 	 */
-
-	/* 256*4=1024 bytes FIFO length */
-	size = 256;
-	for (ep = 1; ep <= 4; ep++) {
-		val = addr;
-		val |= size << FIFOSIZE_DEPTH_SHIFT;
-		WARN_ONCE(addr + size > hsotg->fifo_mem,
-			  "insufficient fifo memory");
-		addr += size;
-
-		writel(val, hsotg->regs + DPTXFSIZN(ep));
-	}
-	/* 768*4=3072 bytes FIFO length */
-	size = 768;
-	for (ep = 5; ep <= 8; ep++) {
+	for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
+		if (!hsotg->g_tx_fifo_sz[ep])
+			continue;
 		val = addr;
-		val |= size << FIFOSIZE_DEPTH_SHIFT;
-		WARN_ONCE(addr + size > hsotg->fifo_mem,
+		val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT;
+		WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem,
 			  "insufficient fifo memory");
-		addr += size;
+		addr += hsotg->g_tx_fifo_sz[ep];
 
 		writel(val, hsotg->regs + DPTXFSIZN(ep));
 	}
@@ -3495,9 +3480,42 @@ static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg)
 static void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg)
 {
 	struct device_node *np = hsotg->dev->of_node;
+	u32 len = 0;
+	u32 i = 0;
 
 	/* Enable dma if requested in device tree */
 	hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma");
+
+	/*
+	* Register TX periodic fifo size per endpoint.
+	* EP0 is excluded since it has no fifo configuration.
+	*/
+	if (!of_find_property(np, "g-tx-fifo-size", &len))
+		goto rx_fifo;
+
+	len /= sizeof(u32);
+
+	/* Read tx fifo sizes other than ep0 */
+	if (of_property_read_u32_array(np, "g-tx-fifo-size",
+						&hsotg->g_tx_fifo_sz[1], len))
+		goto rx_fifo;
+
+	/* Add ep0 */
+	len++;
+
+	/* Make remaining TX fifos unavailable */
+	if (len < MAX_EPS_CHANNELS) {
+		for (i = len; i < MAX_EPS_CHANNELS; i++)
+			hsotg->g_tx_fifo_sz[i] = 0;
+	}
+
+rx_fifo:
+	/* Register RX fifo size */
+	of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz);
+
+	/* Register NPTX fifo size */
+	of_property_read_u32(np, "g-np-tx-fifo-size",
+						&hsotg->g_np_g_tx_fifo_sz);
 }
 #else
 static inline void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg) { }
@@ -3515,12 +3533,26 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
 	int epnum;
 	int ret;
 	int i;
+	u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE;
 
 	/* Set default UTMI width */
 	hsotg->phyif = GUSBCFG_PHYIF16;
 
 	s3c_hsotg_of_probe(hsotg);
 
+	/* Initialize to legacy fifo configuration values */
+	hsotg->g_rx_fifo_sz = 2048;
+	hsotg->g_np_g_tx_fifo_sz = 1024;
+	memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo));
+	/* Device tree specific probe */
+	s3c_hsotg_of_probe(hsotg);
+	/* Dump fifo information */
+	dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n",
+						hsotg->g_np_g_tx_fifo_sz);
+	dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz);
+	for (i = 0; i < MAX_EPS_CHANNELS; i++)
+		dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i,
+						hsotg->g_tx_fifo_sz[i]);
 	/*
 	 * If platform probe couldn't find a generic PHY or an old style
 	 * USB PHY, fall back to pdata