IXP4xx: workaround for PCI prefetch problems near 64 MB boundary.

Map unused registers at the end of DMA region at 64 MB to allow PCI masters
to cross the boundary when prefetching data from SDRAM.
Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

arch/arm/include/asm/sizes.h

@@ -43,6 +43,7 @@
 #define SZ_8M                           0x00800000
 #define SZ_16M                          0x01000000
 #define SZ_32M                          0x02000000
+#define SZ_48M                          0x03000000
 #define SZ_64M                          0x04000000
 #define SZ_128M                         0x08000000
 #define SZ_256M                         0x10000000

arch/arm/mach-ixp4xx/common-pci.c

@@ -366,7 +366,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
 }
 
 void __init ixp4xx_pci_preinit(void)
-{  
+{
 	unsigned long cpuid = read_cpuid_id();
 
 	/*
@@ -386,17 +386,17 @@ void __init ixp4xx_pci_preinit(void)
 
 	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
 
-	/* 
+	/*
 	 * We use identity AHB->PCI address translation
 	 * in the 0x48000000 to 0x4bffffff address space
 	 */
 	*PCI_PCIMEMBASE = 0x48494A4B;
 
-	/* 
+	/*
 	 * We also use identity PCI->AHB address translation
 	 * in 4 16MB BARs that begin at the physical memory start
 	 */
-	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + 
+	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
 		((PHYS_OFFSET & 0xFF000000) >> 8) +
 		((PHYS_OFFSET & 0xFF000000) >> 16) +
 		((PHYS_OFFSET & 0xFF000000) >> 24) +
@@ -408,18 +408,19 @@ void __init ixp4xx_pci_preinit(void)
 		pr_debug("setup BARs in controller\n");
 
 		/*
-		 * We configure the PCI inbound memory windows to be 
+		 * We configure the PCI inbound memory windows to be
 		 * 1:1 mapped to SDRAM
 		 */
-		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET + 0x00000000);
-		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + 0x01000000);
-		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + 0x02000000);
-		local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + 0x03000000);
+		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
+		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
+		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
+		local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + SZ_48M);
 
 		/*
-		 * Enable CSR window at 0xff000000.
+		 * Enable CSR window at 64 MiB to allow PCI masters
+		 * to continue prefetching past 64 MiB boundary.
 		 */
-		local_write_config(PCI_BASE_ADDRESS_4, 4, 0xff000008);
+		local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
 
 		/*
 		 * Enable the IO window to be way up high, at 0xfffffc00