Merge tag 'tty-3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are 3 patches for 3.17-rc5.  Two serial driver fixes that resolve
  some reported issues, and one new device id.

  All have been in linux-next just fine"

* tag 'tty-3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: xuartps: Fix tx_emtpy() callback
  tty/serial: at91: BUG: disable interrupts when !UART_ENABLE_MS()
  serial: 8250_dw: Add ACPI ID for Intel Braswell

drivers/tty/serial/8250/8250_dw.c

@@ -540,6 +540,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "INT3434", 0 },
 	{ "INT3435", 0 },
 	{ "80860F0A", 0 },
+	{ "8086228A", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);

drivers/tty/serial/atmel_serial.c

@@ -526,6 +526,45 @@ static void atmel_enable_ms(struct uart_port *port)
 	UART_PUT_IER(port, ier);
 }
 
+/*
+ * Disable modem status interrupts
+ */
+static void atmel_disable_ms(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	uint32_t idr = 0;
+
+	/*
+	 * Interrupt should not be disabled twice
+	 */
+	if (!atmel_port->ms_irq_enabled)
+		return;
+
+	atmel_port->ms_irq_enabled = false;
+
+	if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
+		disable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
+	else
+		idr |= ATMEL_US_CTSIC;
+
+	if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
+		disable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
+	else
+		idr |= ATMEL_US_DSRIC;
+
+	if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
+		disable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
+	else
+		idr |= ATMEL_US_RIIC;
+
+	if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
+		disable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
+	else
+		idr |= ATMEL_US_DCDIC;
+
+	UART_PUT_IDR(port, idr);
+}
+
 /*
  * Control the transmission of a break signal
  */
@@ -1993,7 +2032,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* CTS flow-control and modem-status interrupts */
 	if (UART_ENABLE_MS(port, termios->c_cflag))
-		port->ops->enable_ms(port);
+		atmel_enable_ms(port);
+	else
+		atmel_disable_ms(port);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }

drivers/tty/serial/xilinx_uartps.c

@@ -581,7 +581,7 @@ static unsigned int cdns_uart_tx_empty(struct uart_port *port)
 {
 	unsigned int status;
 
-	status = cdns_uart_readl(CDNS_UART_ISR_OFFSET) & CDNS_UART_IXR_TXEMPTY;
+	status = cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY;
 	return status ? TIOCSER_TEMT : 0;
 }