提交 09dafe9e 编写于 作者: M Magnus Damm 提交者: Paul Mundt

ARM: mach-shmobile: sh73a0 PFC pull-up support for SDHI0+2

Extend the existing sh73a0 PFC code with pull-ups for
SDHI0 and SDHI2. Without this patch only SDHI1 has
pull-up support on sh73a0. Needed by boards that make
use of the internal pull-up resistor support built in
the SoC.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 fe437561
......@@ -451,11 +451,23 @@ enum {
GPIO_FN_KEYIN5_PU,
GPIO_FN_KEYIN6_PU,
GPIO_FN_KEYIN7_PU,
GPIO_FN_SDHICD0_PU,
GPIO_FN_SDHID0_0_PU,
GPIO_FN_SDHID0_1_PU,
GPIO_FN_SDHID0_2_PU,
GPIO_FN_SDHID0_3_PU,
GPIO_FN_SDHICMD0_PU,
GPIO_FN_SDHIWP0_PU,
GPIO_FN_SDHID1_0_PU,
GPIO_FN_SDHID1_1_PU,
GPIO_FN_SDHID1_2_PU,
GPIO_FN_SDHID1_3_PU,
GPIO_FN_SDHICMD1_PU,
GPIO_FN_SDHID2_0_PU,
GPIO_FN_SDHID2_1_PU,
GPIO_FN_SDHID2_2_PU,
GPIO_FN_SDHID2_3_PU,
GPIO_FN_SDHICMD2_PU,
GPIO_FN_MMCCMD0_PU,
GPIO_FN_MMCCMD1_PU,
GPIO_FN_FSIACK_PU,
......@@ -463,6 +475,7 @@ enum {
GPIO_FN_FSIAIBT_PU,
GPIO_FN_FSIAISLD_PU,
};
/* DMA slave IDs */
enum {
SHDMA_SLAVE_INVALID,
......
......@@ -488,13 +488,26 @@ enum {
KEYIN5_PU_MARK,
KEYIN6_PU_MARK,
KEYIN7_PU_MARK,
SDHICD0_PU_MARK,
SDHID0_0_PU_MARK,
SDHID0_1_PU_MARK,
SDHID0_2_PU_MARK,
SDHID0_3_PU_MARK,
SDHICMD0_PU_MARK,
SDHIWP0_PU_MARK,
SDHID1_0_PU_MARK,
SDHID1_1_PU_MARK,
SDHID1_2_PU_MARK,
SDHID1_3_PU_MARK,
SDHICMD1_PU_MARK,
SDHID2_0_PU_MARK,
SDHID2_1_PU_MARK,
SDHID2_2_PU_MARK,
SDHID2_3_PU_MARK,
SDHICMD2_PU_MARK,
MMCCMD0_PU_MARK,
MMCCMD1_PU_MARK,
FSIBISLD_PU_MARK,
FSIACK_PU_MARK,
FSIAILR_PU_MARK,
FSIAIBT_PU_MARK,
......@@ -1387,19 +1400,28 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3),
PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1),
PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, MSEL4CR_MSEL15_0), \
PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU,
MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU,
MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU,
MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU,
MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU,
MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3),
PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, MSEL4CR_MSEL15_0), \
PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU,
MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3),
PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, MSEL4CR_MSEL15_0), \
PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU,
MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3),
PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, MSEL4CR_MSEL15_0), \
PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU,
MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3),
PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU,
MSEL4CR_MSEL15_0),
PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \
PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2),
PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1),
......@@ -1516,16 +1538,29 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_IN_PU, PORT259_FN1),
PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_IN_PU, PORT260_FN1),
PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_IN_PU, PORT261_FN1),
PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_IN_PU, PORT262_FN1),
PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_IN_PU, PORT263_FN1),
PINMUX_DATA(SDHICD0_PU_MARK, PORT251_FN1, PORT251_IN_PU),
PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU),
PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU),
PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU),
PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU),
PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU),
PINMUX_DATA(SDHIWP0_PU_MARK, PORT257_FN1, PORT256_IN_PU),
PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU),
PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU),
PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU),
PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU),
PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU),
PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU),
PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU),
PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU),
PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU),
PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU),
PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT279_IN_PU,
PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
MSEL4CR_MSEL15_1),
PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
......@@ -2181,11 +2216,23 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(KEYIN5_PU),
GPIO_FN(KEYIN6_PU),
GPIO_FN(KEYIN7_PU),
GPIO_FN(SDHICD0_PU),
GPIO_FN(SDHID0_0_PU),
GPIO_FN(SDHID0_1_PU),
GPIO_FN(SDHID0_2_PU),
GPIO_FN(SDHID0_3_PU),
GPIO_FN(SDHICMD0_PU),
GPIO_FN(SDHIWP0_PU),
GPIO_FN(SDHID1_0_PU),
GPIO_FN(SDHID1_1_PU),
GPIO_FN(SDHID1_2_PU),
GPIO_FN(SDHID1_3_PU),
GPIO_FN(SDHICMD1_PU),
GPIO_FN(SDHID2_0_PU),
GPIO_FN(SDHID2_1_PU),
GPIO_FN(SDHID2_2_PU),
GPIO_FN(SDHID2_3_PU),
GPIO_FN(SDHICMD2_PU),
GPIO_FN(MMCCMD0_PU),
GPIO_FN(MMCCMD1_PU),
GPIO_FN(FSIACK_PU),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册