mwifiex: update seq number correctly for packets from TDLS peer

This patch adds handling of updating rx sequence number for
packets received from TDLS peer. Current implementation of
mwifiex_queueing_ra_based assumes station would always receive
packets from AP which is not true in case of TDLS.
Fix this by adding this case.
Signed-off-by: NAvinash Patil <patila@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/mwifiex/fw.h

@@ -539,6 +539,7 @@ struct mwifiex_ie_types_data {
 #define MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET 0x01
 #define MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET 0x08
 #define MWIFIEX_TXPD_FLAGS_TDLS_PACKET      0x10
+#define MWIFIEX_RXPD_FLAGS_TDLS_PACKET      0x01
 
 struct txpd {
 	u8 bss_type;
@@ -581,7 +582,7 @@ struct rxpd {
 	 * [Bit 7] Reserved
 	 */
 	u8 ht_info;
-	u8 reserved;
+	u8 flags;
 } __packed;
 
 struct uap_txpd {

drivers/net/wireless/mwifiex/sta_rx.c

@@ -183,6 +183,7 @@ int mwifiex_process_sta_rx_packet(struct mwifiex_private *priv,
 	struct rx_packet_hdr *rx_pkt_hdr;
 	u8 ta[ETH_ALEN];
 	u16 rx_pkt_type, rx_pkt_offset, rx_pkt_length, seq_num;
+	struct mwifiex_sta_node *sta_ptr;
 
 	local_rx_pd = (struct rxpd *) (skb->data);
 	rx_pkt_type = le16_to_cpu(local_rx_pd->rx_pkt_type);
@@ -213,14 +214,25 @@ int mwifiex_process_sta_rx_packet(struct mwifiex_private *priv,
 	 * If the packet is not an unicast packet then send the packet
 	 * directly to os. Don't pass thru rx reordering
 	 */
-	if (!IS_11N_ENABLED(priv) ||
+	if ((!IS_11N_ENABLED(priv) &&
+	     !(ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
+	       !(local_rx_pd->flags & MWIFIEX_RXPD_FLAGS_TDLS_PACKET))) ||
 	    !ether_addr_equal_unaligned(priv->curr_addr, rx_pkt_hdr->eth803_hdr.h_dest)) {
 		mwifiex_process_rx_packet(priv, skb);
 		return ret;
 	}
 
-	if (mwifiex_queuing_ra_based(priv)) {
+	if (mwifiex_queuing_ra_based(priv) ||
+	    (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
+	     local_rx_pd->flags & MWIFIEX_RXPD_FLAGS_TDLS_PACKET)) {
 		memcpy(ta, rx_pkt_hdr->eth803_hdr.h_source, ETH_ALEN);
+		if (local_rx_pd->flags & MWIFIEX_RXPD_FLAGS_TDLS_PACKET &&
+		    local_rx_pd->priority < MAX_NUM_TID) {
+			sta_ptr = mwifiex_get_sta_entry(priv, ta);
+			if (sta_ptr)
+				sta_ptr->rx_seq[local_rx_pd->priority] =
+					      le16_to_cpu(local_rx_pd->seq_num);
+		}
 	} else {
 		if (rx_pkt_type != PKT_TYPE_BAR)
 			priv->rx_seq[local_rx_pd->priority] = seq_num;