tg3: Add support for ethtool -L|-l to get/set the number of rings.

Default remains the same.
Reviewed-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Reviewed-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/tg3.c

@@ -10239,11 +10239,15 @@ static bool tg3_enable_msix(struct tg3 *tp)
 	int i, rc;
 	struct msix_entry msix_ent[tp->irq_max];
 
-	tp->rxq_cnt = netif_get_num_default_rss_queues();
+	tp->txq_cnt = tp->txq_req;
+	tp->rxq_cnt = tp->rxq_req;
+	if (!tp->rxq_cnt)
+		tp->rxq_cnt = netif_get_num_default_rss_queues();
 	if (tp->rxq_cnt > tp->rxq_max)
 		tp->rxq_cnt = tp->rxq_max;
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) &&
+	    !tp->txq_req)
 		tp->txq_cnt = min(tp->rxq_cnt, tp->txq_max);
 
 	tp->irq_cnt = tg3_irq_count(tp);
@@ -11384,6 +11388,58 @@ static int tg3_set_rxfh_indir(struct net_device *dev, const u32 *indir)
 	return 0;
 }
 
+static void tg3_get_channels(struct net_device *dev,
+			     struct ethtool_channels *channel)
+{
+	struct tg3 *tp = netdev_priv(dev);
+	u32 deflt_qs = netif_get_num_default_rss_queues();
+
+	channel->max_rx = tp->rxq_max;
+	channel->max_tx = tp->txq_max;
+
+	if (netif_running(dev)) {
+		channel->rx_count = tp->rxq_cnt;
+		channel->tx_count = tp->txq_cnt;
+	} else {
+		if (tp->rxq_req)
+			channel->rx_count = tp->rxq_req;
+		else
+			channel->rx_count = min(deflt_qs, tp->rxq_max);
+
+		if (tp->txq_req)
+			channel->tx_count = tp->txq_req;
+		else
+			channel->tx_count = min(deflt_qs, tp->txq_max);
+	}
+}
+
+static int tg3_set_channels(struct net_device *dev,
+			    struct ethtool_channels *channel)
+{
+	struct tg3 *tp = netdev_priv(dev);
+
+	if (!tg3_flag(tp, SUPPORT_MSIX))
+		return -EOPNOTSUPP;
+
+	if (channel->rx_count > tp->rxq_max ||
+	    channel->tx_count > tp->txq_max)
+		return -EINVAL;
+
+	tp->rxq_req = channel->rx_count;
+	tp->txq_req = channel->tx_count;
+
+	if (!netif_running(dev))
+		return 0;
+
+	tg3_stop(tp);
+
+	netif_carrier_off(dev);
+
+	tg3_start(tp, true, false);
+
+	return 0;
+}
+
 static void tg3_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 {
 	switch (stringset) {
@@ -12632,6 +12688,8 @@ static const struct ethtool_ops tg3_ethtool_ops = {
 	.get_rxfh_indir_size    = tg3_get_rxfh_indir_size,
 	.get_rxfh_indir		= tg3_get_rxfh_indir,
 	.set_rxfh_indir		= tg3_set_rxfh_indir,
+	.get_channels		= tg3_get_channels,
+	.set_channels		= tg3_set_channels,
 	.get_ts_info		= ethtool_op_get_ts_info,
 };
 

drivers/net/ethernet/broadcom/tg3.h

@@ -3038,6 +3038,7 @@ struct tg3 {
 	void				(*write32_tx_mbox) (struct tg3 *, u32,
 							    u32);
 	u32				dma_limit;
+	u32				txq_req;
 	u32				txq_cnt;
 	u32				txq_max;
 
@@ -3054,6 +3055,7 @@ struct tg3 {
 	u32				rx_std_max_post;
 	u32				rx_offset;
 	u32				rx_pkt_map_sz;
+	u32				rxq_req;
 	u32				rxq_cnt;
 	u32				rxq_max;
 	bool				rx_refill;