提交 08aff8cd 编写于 作者: M Mark Brown

ASoC: Add SPI support to WM8711

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 d97d2e35
......@@ -35,7 +35,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8523 if I2C
select SND_SOC_WM8580 if I2C
select SND_SOC_WM8711 if I2C
select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
......
......@@ -535,6 +535,62 @@ static void wm8711_unregister(struct wm8711_priv *wm8711)
wm8711_codec = NULL;
}
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8711_spi_probe(struct spi_device *spi)
{
struct snd_soc_codec *codec;
struct wm8711_priv *wm8711;
wm8711 = kzalloc(sizeof(struct wm8711_priv), GFP_KERNEL);
if (wm8711 == NULL)
return -ENOMEM;
codec = &wm8711->codec;
codec->control_data = spi;
codec->dev = &spi->dev;
dev_set_drvdata(&spi->dev, wm8711);
return wm8711_register(wm8711, SND_SOC_SPI);
}
static int __devexit wm8711_spi_remove(struct spi_device *spi)
{
struct wm8711_priv *wm8711 = dev_get_drvdata(&spi->dev);
wm8711_unregister(wm8711);
return 0;
}
#ifdef CONFIG_PM
static int wm8711_spi_suspend(struct spi_device *spi, pm_message_t msg)
{
return snd_soc_suspend_device(&spi->dev);
}
static int wm8711_spi_resume(struct spi_device *spi)
{
return snd_soc_resume_device(&spi->dev);
}
#else
#define wm8711_spi_suspend NULL
#define wm8711_spi_resume NULL
#endif
static struct spi_driver wm8711_spi_driver = {
.driver = {
.name = "wm8711",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8711_spi_probe,
.suspend = wm8711_spi_suspend,
.resume = wm8711_spi_resume,
.remove = __devexit_p(wm8711_spi_remove),
};
#endif /* CONFIG_SPI_MASTER */
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
static __devinit int wm8711_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
......@@ -590,6 +646,13 @@ static int __init wm8711_modinit(void)
printk(KERN_ERR "Failed to register WM8711 I2C driver: %d\n",
ret);
}
#endif
#if defined(CONFIG_SPI_MASTER)
ret = spi_register_driver(&wm8731_spi_driver);
if (ret != 0) {
printk(KERN_ERR "Failed to register WM8731 SPI driver: %d\n",
ret);
}
#endif
return 0;
}
......@@ -600,6 +663,9 @@ static void __exit wm8711_exit(void)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8711_i2c_driver);
#endif
#if defined(CONFIG_SPI_MASTER)
spi_unregister_driver(&wm8731_spi_driver);
#endif
}
module_exit(wm8711_exit);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册