Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 088ef950 编写于 作者: T Tony Lindgren
浏览文件
操作

omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 

Convert ARCH_OMAP24XX to ARCH_OMAP2
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 d10f2b6e
隐藏空白更改
内联 并排
Showing with 63 addition and 67 deletion
arch/arm/mach-omap2/Kconfig
浏览文件 @ 088ef950
comment "OMAP Core Type"
depends on ARCH_OMAP2
config ARCH_OMAP24XX
bool "OMAP24xx Based System"
depends on ARCH_OMAP2
config ARCH_OMAP2420
bool "OMAP2420 support"
depends on ARCH_OMAP24XX
depends on ARCH_OMAP2
select OMAP_DM_TIMER
select ARCH_OMAP_OTG
config ARCH_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP24XX
depends on ARCH_OMAP2
config ARCH_OMAP34XX
bool "OMAP34xx Based System"
......@@ -42,7 +38,7 @@ comment "OMAP Board Type"
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
depends on ARCH_OMAP2
config MACH_OMAP2_TUSB6010
bool
......@@ -51,16 +47,16 @@ config MACH_OMAP2_TUSB6010
config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
depends on ARCH_OMAP2
select OMAP_DEBUG_DEVICES
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
depends on ARCH_OMAP2
config MACH_OMAP_2430SDP
bool "OMAP 2430 SDP board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
depends on ARCH_OMAP2
config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
......
arch/arm/mach-omap2/Makefile
浏览文件 @ 088ef950
......@@ -48,7 +48,7 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
......
arch/arm/mach-omap2/clock.h
浏览文件 @ 088ef950
......@@ -129,7 +129,7 @@ extern const struct clksel_rate gpt_32k_rates[];
extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_CPU_FREQ)
#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#else
......
arch/arm/mach-omap2/clockdomains.h
浏览文件 @ 088ef950
......@@ -84,7 +84,7 @@ static struct clkdm_dep gfx_sgx_wkdeps[] = {
/* 24XX-specific possible dependencies */
#ifdef CONFIG_ARCH_OMAP24XX
#ifdef CONFIG_ARCH_OMAP2
/* Wakeup dependency source arrays */
......
arch/arm/mach-omap2/io.c
浏览文件 @ 088ef950
......@@ -55,7 +55,7 @@
* default mapping provided here.
*/
#ifdef CONFIG_ARCH_OMAP24XX
#ifdef CONFIG_ARCH_OMAP2
static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
......
arch/arm/mach-omap2/mux.c
浏览文件 @ 088ef950
......@@ -75,7 +75,7 @@ void omap_mux_write_array(struct omap_board_mux *board_mux)
}
}
#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
static struct omap_mux_cfg arch_mux_cfg;
......
arch/arm/mach-omap2/powerdomains24xx.h
浏览文件 @ 088ef950
......@@ -30,7 +30,7 @@
/* 24XX powerdomains and dependencies */
#ifdef CONFIG_ARCH_OMAP24XX
#ifdef CONFIG_ARCH_OMAP2
/* Powerdomains */
......@@ -82,7 +82,7 @@ static struct powerdomain core_24xx_pwrdm = {
},
};
#endif /* CONFIG_ARCH_OMAP24XX */
#endif /* CONFIG_ARCH_OMAP2 */
......
arch/arm/plat-omap/Kconfig
浏览文件 @ 088ef950
......@@ -124,7 +124,7 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
......@@ -145,7 +145,7 @@ config OMAP_32K_TIMER_HZ
config OMAP_DM_TIMER
bool "Use dual-mode timer"
depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to use OMAP Dual-Mode timers.
......
arch/arm/plat-omap/devices.c
浏览文件 @ 088ef950
......@@ -244,7 +244,7 @@ int __init omap_mmc_add(const char *name, int id, unsigned long base,
#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
#ifdef CONFIG_ARCH_OMAP24XX
#ifdef CONFIG_ARCH_OMAP2
#define OMAP_RNG_BASE 0x480A0000
#else
#define OMAP_RNG_BASE 0xfffe5000
......
arch/arm/plat-omap/gpio.c
浏览文件 @ 088ef950
......@@ -177,12 +177,12 @@ struct gpio_bank {
u16 irq;
u16 virtual_irq_start;
int method;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
......@@ -248,7 +248,7 @@ static struct gpio_bank gpio_bank_7xx[7] = {
};
#endif
#ifdef CONFIG_ARCH_OMAP24XX
#ifdef CONFIG_ARCH_OMAP2
static struct gpio_bank gpio_bank_242x[4] = {
{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
......@@ -426,7 +426,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
reg += OMAP7XX_GPIO_DIR_CONTROL;
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
......@@ -493,7 +493,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
l &= ~(1 << gpio);
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
......@@ -546,7 +546,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
reg += OMAP7XX_GPIO_DATA_INPUT;
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
......@@ -592,7 +592,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
reg += OMAP7XX_GPIO_DATA_OUTPUT;
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAOUT;
......@@ -684,7 +684,7 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
......@@ -856,7 +856,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
goto bad;
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
......@@ -937,7 +937,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
reg += OMAP7XX_GPIO_INT_STATUS;
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
......@@ -954,7 +954,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
__raw_writel(gpio_mask, reg);
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
#endif
#if defined(CONFIG_ARCH_OMAP4)
......@@ -1008,7 +1008,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
inv = 1;
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
......@@ -1077,7 +1077,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
l |= gpio_mask;
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
......@@ -1131,7 +1131,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
......@@ -1227,7 +1227,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
__raw_writel(1 << offset, reg);
}
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
......@@ -1286,7 +1286,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (bank->method == METHOD_GPIO_7XX)
isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
......@@ -1756,7 +1756,7 @@ static int __init _omap_gpio_init(void)
bank_size = SZ_2K;
}
#endif
#ifdef CONFIG_ARCH_OMAP24XX
#ifdef CONFIG_ARCH_OMAP2
if (cpu_is_omap242x()) {
gpio_bank_count = 4;
gpio_bank = gpio_bank_242x;
......@@ -1809,7 +1809,7 @@ static int __init _omap_gpio_init(void)
gpio_count = 32; /* 7xx has 32-bit GPIOs */
}
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
static const u32 non_wakeup_gpios[] = {
......@@ -1903,7 +1903,7 @@ static int __init _omap_gpio_init(void)
return 0;
}
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
......@@ -1927,7 +1927,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
......@@ -1975,7 +1975,7 @@ static int omap_gpio_resume(struct sys_device *dev)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
......@@ -2013,7 +2013,7 @@ static struct sys_device omap_gpio_device = {
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
static int workaround_enabled;
......@@ -2030,7 +2030,7 @@ void omap2_gpio_prepare_for_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
......@@ -2045,7 +2045,7 @@ void omap2_gpio_prepare_for_retention(void)
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
......@@ -2074,7 +2074,7 @@ void omap2_gpio_resume_after_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
__raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(bank->saved_risingdetect,
......@@ -2113,7 +2113,7 @@ void omap2_gpio_resume_after_retention(void)
if (gen) {
u32 old0, old1;
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | gen, bank->base +
......@@ -2240,7 +2240,7 @@ static int __init omap_gpio_sysinit(void)
mpuio_init();
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
......@@ -2300,7 +2300,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
/* FIXME for at least omap2, show pullup/pulldown state */
irqstat = irq_desc[irq].status;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
......
arch/arm/plat-omap/i2c.c
浏览文件 @ 088ef950
......@@ -50,7 +50,7 @@ static const char name[] = "i2c_omap";
static struct resource i2c_resources[][2] = {
{ I2C_RESOURCE_BUILDER(0, 0) },
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
......@@ -72,7 +72,7 @@ static struct resource i2c_resources[][2] = {
static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
static struct platform_device omap_i2c_devices[] = {
I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
......
arch/arm/plat-omap/include/plat/cpu.h
浏览文件 @ 088ef950
......@@ -114,7 +114,7 @@ unsigned int omap_rev(void);
# define OMAP_NAME omap16xx
# endif
#endif
#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX))
# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
# error "OMAP1 and OMAP2 can't be selected at the same time"
# endif
......@@ -233,7 +233,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
#endif
#if defined(MULTI_OMAP2)
# if defined(CONFIG_ARCH_OMAP24XX)
# if defined(CONFIG_ARCH_OMAP2)
# undef cpu_is_omap24xx
# undef cpu_is_omap242x
# undef cpu_is_omap243x
......@@ -248,7 +248,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
# define cpu_is_omap343x() is_omap343x()
# endif
#else
# if defined(CONFIG_ARCH_OMAP24XX)
# if defined(CONFIG_ARCH_OMAP2)
# undef cpu_is_omap24xx
# define cpu_is_omap24xx() 1
# endif
......@@ -374,7 +374,7 @@ IS_OMAP_TYPE(3517, 0x3517)
# define cpu_is_omap1710() is_omap1710()
#endif
#if defined(CONFIG_ARCH_OMAP24XX)
#if defined(CONFIG_ARCH_OMAP2)
# undef cpu_is_omap2420
# undef cpu_is_omap2422
# undef cpu_is_omap2423
......
arch/arm/plat-omap/include/plat/mcbsp.h
浏览文件 @ 088ef950
......@@ -103,7 +103,7 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
#define OMAP_MCBSP_REG_DRR2 0x00
......
arch/arm/plat-omap/include/plat/menelaus.h
浏览文件 @ 088ef950
......@@ -40,7 +40,7 @@ extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
extern int menelaus_set_regulator_sleep(int enable, u32 val);
#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
#define omap_has_menelaus() 1
#else
#define omap_has_menelaus() 0
......
arch/arm/plat-omap/include/plat/mux.h
浏览文件 @ 088ef950
......@@ -135,7 +135,7 @@ struct pin_config {
const unsigned int mux_reg;
unsigned char debug;
#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
const unsigned char mask_offset;
const unsigned char mask;
......
arch/arm/plat-omap/include/plat/omap24xx.h
浏览文件 @ 088ef950
......@@ -23,8 +23,8 @@
*
*/
#ifndef __ASM_ARCH_OMAP24XX_H
#define __ASM_ARCH_OMAP24XX_H
#ifndef __ASM_ARCH_OMAP2_H
#define __ASM_ARCH_OMAP2_H
/*
* Please place only base defines here and put the rest in device
......@@ -85,5 +85,5 @@
#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
#endif /* __ASM_ARCH_OMAP24XX_H */
#endif /* __ASM_ARCH_OMAP2_H */
arch/arm/plat-omap/sram.c
浏览文件 @ 088ef950
......@@ -53,7 +53,7 @@
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#define SRAM_BOOTLOADER_SZ 0x00
#else
#define SRAM_BOOTLOADER_SZ 0x80
......
drivers/char/hw_random/Kconfig
浏览文件 @ 088ef950
......@@ -114,7 +114,7 @@ config HW_RANDOM_IXP4XX
config HW_RANDOM_OMAP
tristate "OMAP Random Number Generator support"
depends on HW_RANDOM && (ARCH_OMAP16XX || ARCH_OMAP24XX)
depends on HW_RANDOM && (ARCH_OMAP16XX || ARCH_OMAP2)
default HW_RANDOM
---help---
This driver provides kernel-side support for the Random Number
......
drivers/mfd/Kconfig
浏览文件 @ 088ef950
......@@ -94,7 +94,7 @@ config TPS65010
config MENELAUS
bool "Texas Instruments TWL92330/Menelaus PM chip"
depends on I2C=y && ARCH_OMAP24XX
depends on I2C=y && ARCH_OMAP2
help
If you say yes here you get support for the Texas Instruments
TWL92330/Menelaus Power Management chip. This include voltage
......
drivers/net/smc911x.h
浏览文件 @ 088ef950
......@@ -47,7 +47,7 @@
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
#define SMC_MEM_RESERVED 1
#elif defined(CONFIG_ARCH_OMAP24XX)
#elif defined(CONFIG_ARCH_OMAP2)
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
......
drivers/spi/Kconfig
浏览文件 @ 088ef950
......@@ -164,7 +164,7 @@ config SPI_OMAP_UWIRE
config SPI_OMAP24XX
tristate "McSPI driver for OMAP24xx/OMAP34xx"
depends on ARCH_OMAP24XX || ARCH_OMAP34XX
depends on ARCH_OMAP2 || ARCH_OMAP34XX
help
SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
(McSPI) modules.
......
drivers/watchdog/Kconfig
浏览文件 @ 088ef950
......@@ -194,7 +194,7 @@ config EP93XX_WATCHDOG
config OMAP_WATCHDOG
tristate "OMAP Watchdog"
depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX
help
Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y'
here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
......
sound/soc/omap/omap-mcbsp.c
浏览文件 @ 088ef950
......@@ -82,7 +82,7 @@ static const int omap1_dma_reqs[][2] = {};
static const unsigned long omap1_mcbsp_port[][2] = {};
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
static const int omap24xx_dma_reqs[][2] = {
{ OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX },
{ OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX },
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或