提交 0771fb45 编写于 作者: E Eric Sandeen 提交者: Lachlan McIlroy

[XFS] Refactor xfs_mountfs

Refactoring xfs_mountfs() to call sub-functions for logical chunks can
help save a bit of stack, and can make it easier to read this long
function.

The mount path is one of the longest common callchains, easily getting to
within a few bytes of the end of a 4k stack when over lvm, quotas are
enabled, and quotacheck must be done.

With this change on top of the other stack-related changes I've sent, I
can get xfs to survive a normal xfsqa run on 4k stacks over lvm.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29834a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NDonald Douwsma <donaldd@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>
上级 b53e675d
......@@ -733,49 +733,13 @@ xfs_initialize_perag_data(xfs_mount_t *mp, xfs_agnumber_t agcount)
}
/*
* xfs_mountfs
*
* This function does the following on an initial mount of a file system:
* - reads the superblock from disk and init the mount struct
* - if we're a 32-bit kernel, do a size check on the superblock
* so we don't mount terabyte filesystems
* - init mount struct realtime fields
* - allocate inode hash table for fs
* - init directory manager
* - perform recovery and init the log manager
* Update alignment values based on mount options and sb values
*/
int
xfs_mountfs(
xfs_mount_t *mp,
int mfsi_flags)
STATIC int
xfs_update_alignment(xfs_mount_t *mp, int mfsi_flags, __uint64_t *update_flags)
{
xfs_buf_t *bp;
xfs_sb_t *sbp = &(mp->m_sb);
xfs_inode_t *rip;
bhv_vnode_t *rvp = NULL;
int readio_log, writeio_log;
xfs_daddr_t d;
__uint64_t resblks;
__int64_t update_flags;
uint quotamount, quotaflags;
int agno;
int uuid_mounted = 0;
int error = 0;
if (mp->m_sb_bp == NULL) {
if ((error = xfs_readsb(mp, mfsi_flags))) {
return error;
}
}
xfs_mount_common(mp, sbp);
/*
* Check if sb_agblocks is aligned at stripe boundary
* If sb_agblocks is NOT aligned turn off m_dalign since
* allocator alignment is within an ag, therefore ag has
* to be aligned at stripe boundary.
*/
update_flags = 0LL;
if (mp->m_dalign && !(mfsi_flags & XFS_MFSI_SECOND)) {
/*
* If stripe unit and stripe width are not multiples
......@@ -786,8 +750,7 @@ xfs_mountfs(
if (mp->m_flags & XFS_MOUNT_RETERR) {
cmn_err(CE_WARN,
"XFS: alignment check 1 failed");
error = XFS_ERROR(EINVAL);
goto error1;
return XFS_ERROR(EINVAL);
}
mp->m_dalign = mp->m_swidth = 0;
} else {
......@@ -797,8 +760,7 @@ xfs_mountfs(
mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
if (mp->m_dalign && (sbp->sb_agblocks % mp->m_dalign)) {
if (mp->m_flags & XFS_MOUNT_RETERR) {
error = XFS_ERROR(EINVAL);
goto error1;
return XFS_ERROR(EINVAL);
}
xfs_fs_cmn_err(CE_WARN, mp,
"stripe alignment turned off: sunit(%d)/swidth(%d) incompatible with agsize(%d)",
......@@ -815,8 +777,7 @@ xfs_mountfs(
"stripe alignment turned off: sunit(%d) less than bsize(%d)",
mp->m_dalign,
mp->m_blockmask +1);
error = XFS_ERROR(EINVAL);
goto error1;
return XFS_ERROR(EINVAL);
}
mp->m_swidth = 0;
}
......@@ -829,11 +790,11 @@ xfs_mountfs(
if (XFS_SB_VERSION_HASDALIGN(sbp)) {
if (sbp->sb_unit != mp->m_dalign) {
sbp->sb_unit = mp->m_dalign;
update_flags |= XFS_SB_UNIT;
*update_flags |= XFS_SB_UNIT;
}
if (sbp->sb_width != mp->m_swidth) {
sbp->sb_width = mp->m_swidth;
update_flags |= XFS_SB_WIDTH;
*update_flags |= XFS_SB_WIDTH;
}
}
} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
......@@ -842,49 +803,45 @@ xfs_mountfs(
mp->m_swidth = sbp->sb_width;
}
xfs_alloc_compute_maxlevels(mp);
xfs_bmap_compute_maxlevels(mp, XFS_DATA_FORK);
xfs_bmap_compute_maxlevels(mp, XFS_ATTR_FORK);
xfs_ialloc_compute_maxlevels(mp);
return 0;
}
if (sbp->sb_imax_pct) {
__uint64_t icount;
/*
* Set the maximum inode count for this filesystem
*/
STATIC void
xfs_set_maxicount(xfs_mount_t *mp)
{
xfs_sb_t *sbp = &(mp->m_sb);
__uint64_t icount;
/* Make sure the maximum inode count is a multiple of the
* units we allocate inodes in.
if (sbp->sb_imax_pct) {
/*
* Make sure the maximum inode count is a multiple
* of the units we allocate inodes in.
*/
icount = sbp->sb_dblocks * sbp->sb_imax_pct;
do_div(icount, 100);
do_div(icount, mp->m_ialloc_blks);
mp->m_maxicount = (icount * mp->m_ialloc_blks) <<
sbp->sb_inopblog;
} else
} else {
mp->m_maxicount = 0;
mp->m_maxioffset = xfs_max_file_offset(sbp->sb_blocklog);
/*
* XFS uses the uuid from the superblock as the unique
* identifier for fsid. We can not use the uuid from the volume
* since a single partition filesystem is identical to a single
* partition volume/filesystem.
*/
if ((mfsi_flags & XFS_MFSI_SECOND) == 0 &&
(mp->m_flags & XFS_MOUNT_NOUUID) == 0) {
if (xfs_uuid_mount(mp)) {
error = XFS_ERROR(EINVAL);
goto error1;
}
uuid_mounted=1;
}
}
/*
* Set the default minimum read and write sizes unless
* already specified in a mount option.
* We use smaller I/O sizes when the file system
* is being used for NFS service (wsync mount option).
*/
STATIC void
xfs_set_rw_sizes(xfs_mount_t *mp)
{
xfs_sb_t *sbp = &(mp->m_sb);
int readio_log, writeio_log;
/*
* Set the default minimum read and write sizes unless
* already specified in a mount option.
* We use smaller I/O sizes when the file system
* is being used for NFS service (wsync mount option).
*/
if (!(mp->m_flags & XFS_MOUNT_DFLT_IOSIZE)) {
if (mp->m_flags & XFS_MOUNT_WSYNC) {
readio_log = XFS_WSYNC_READIO_LOG;
......@@ -910,17 +867,14 @@ xfs_mountfs(
mp->m_writeio_log = writeio_log;
}
mp->m_writeio_blocks = 1 << (mp->m_writeio_log - sbp->sb_blocklog);
}
/*
* Set the inode cluster size.
* This may still be overridden by the file system
* block size if it is larger than the chosen cluster size.
*/
mp->m_inode_cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;
/*
* Set whether we're using inode alignment.
*/
/*
* Set whether we're using inode alignment.
*/
STATIC void
xfs_set_inoalignment(xfs_mount_t *mp)
{
if (XFS_SB_VERSION_HASALIGN(&mp->m_sb) &&
mp->m_sb.sb_inoalignmt >=
XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size))
......@@ -936,14 +890,22 @@ xfs_mountfs(
mp->m_sinoalign = mp->m_dalign;
else
mp->m_sinoalign = 0;
/*
* Check that the data (and log if separate) are an ok size.
*/
}
/*
* Check that the data (and log if separate) are an ok size.
*/
STATIC int
xfs_check_sizes(xfs_mount_t *mp, int mfsi_flags)
{
xfs_buf_t *bp;
xfs_daddr_t d;
int error;
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_dblocks) {
cmn_err(CE_WARN, "XFS: size check 1 failed");
error = XFS_ERROR(E2BIG);
goto error1;
return XFS_ERROR(E2BIG);
}
error = xfs_read_buf(mp, mp->m_ddev_targp,
d - XFS_FSS_TO_BB(mp, 1),
......@@ -952,10 +914,9 @@ xfs_mountfs(
xfs_buf_relse(bp);
} else {
cmn_err(CE_WARN, "XFS: size check 2 failed");
if (error == ENOSPC) {
if (error == ENOSPC)
error = XFS_ERROR(E2BIG);
}
goto error1;
return error;
}
if (((mfsi_flags & XFS_MFSI_CLIENT) == 0) &&
......@@ -963,8 +924,7 @@ xfs_mountfs(
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
cmn_err(CE_WARN, "XFS: size check 3 failed");
error = XFS_ERROR(E2BIG);
goto error1;
return XFS_ERROR(E2BIG);
}
error = xfs_read_buf(mp, mp->m_logdev_targp,
d - XFS_FSB_TO_BB(mp, 1),
......@@ -973,17 +933,111 @@ xfs_mountfs(
xfs_buf_relse(bp);
} else {
cmn_err(CE_WARN, "XFS: size check 3 failed");
if (error == ENOSPC) {
if (error == ENOSPC)
error = XFS_ERROR(E2BIG);
}
return error;
}
}
return 0;
}
/*
* xfs_mountfs
*
* This function does the following on an initial mount of a file system:
* - reads the superblock from disk and init the mount struct
* - if we're a 32-bit kernel, do a size check on the superblock
* so we don't mount terabyte filesystems
* - init mount struct realtime fields
* - allocate inode hash table for fs
* - init directory manager
* - perform recovery and init the log manager
*/
int
xfs_mountfs(
xfs_mount_t *mp,
int mfsi_flags)
{
xfs_sb_t *sbp = &(mp->m_sb);
xfs_inode_t *rip;
bhv_vnode_t *rvp = NULL;
__uint64_t resblks;
__int64_t update_flags = 0LL;
uint quotamount, quotaflags;
int agno;
int uuid_mounted = 0;
int error = 0;
if (mp->m_sb_bp == NULL) {
error = xfs_readsb(mp, mfsi_flags);
if (error)
return error;
}
xfs_mount_common(mp, sbp);
/*
* Check if sb_agblocks is aligned at stripe boundary
* If sb_agblocks is NOT aligned turn off m_dalign since
* allocator alignment is within an ag, therefore ag has
* to be aligned at stripe boundary.
*/
error = xfs_update_alignment(mp, mfsi_flags, &update_flags);
if (error)
goto error1;
xfs_alloc_compute_maxlevels(mp);
xfs_bmap_compute_maxlevels(mp, XFS_DATA_FORK);
xfs_bmap_compute_maxlevels(mp, XFS_ATTR_FORK);
xfs_ialloc_compute_maxlevels(mp);
xfs_set_maxicount(mp);
mp->m_maxioffset = xfs_max_file_offset(sbp->sb_blocklog);
/*
* XFS uses the uuid from the superblock as the unique
* identifier for fsid. We can not use the uuid from the volume
* since a single partition filesystem is identical to a single
* partition volume/filesystem.
*/
if ((mfsi_flags & XFS_MFSI_SECOND) == 0 &&
(mp->m_flags & XFS_MOUNT_NOUUID) == 0) {
if (xfs_uuid_mount(mp)) {
error = XFS_ERROR(EINVAL);
goto error1;
}
uuid_mounted=1;
}
/*
* Set the minimum read and write sizes
*/
xfs_set_rw_sizes(mp);
/*
* Set the inode cluster size.
* This may still be overridden by the file system
* block size if it is larger than the chosen cluster size.
*/
mp->m_inode_cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;
/*
* Set inode alignment fields
*/
xfs_set_inoalignment(mp);
/*
* Check that the data (and log if separate) are an ok size.
*/
error = xfs_check_sizes(mp, mfsi_flags);
if (error)
goto error1;
/*
* Initialize realtime fields in the mount structure
*/
if ((error = xfs_rtmount_init(mp))) {
error = xfs_rtmount_init(mp);
if (error) {
cmn_err(CE_WARN, "XFS: RT mount failed");
goto error1;
}
......@@ -1101,7 +1155,8 @@ xfs_mountfs(
/*
* Initialize realtime inode pointers in the mount structure
*/
if ((error = xfs_rtmount_inodes(mp))) {
error = xfs_rtmount_inodes(mp);
if (error) {
/*
* Free up the root inode.
*/
......@@ -1119,7 +1174,8 @@ xfs_mountfs(
/*
* Initialise the XFS quota management subsystem for this mount
*/
if ((error = XFS_QM_INIT(mp, &quotamount, &quotaflags)))
error = XFS_QM_INIT(mp, &quotamount, &quotaflags);
if (error)
goto error4;
/*
......@@ -1136,7 +1192,8 @@ xfs_mountfs(
/*
* Complete the quota initialisation, post-log-replay component.
*/
if ((error = XFS_QM_MOUNT(mp, quotamount, quotaflags, mfsi_flags)))
error = XFS_QM_MOUNT(mp, quotamount, quotaflags, mfsi_flags);
if (error)
goto error4;
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册