提交 06dbbd69 编写于 作者: B Ben Dooks 提交者: Russell King

[ARM] 4795/1: S3C244X: Add armclk and setparent call

Add armclk to the supported clocks on the S3C2440 and S3C2442 to
better represent the DVS state which controls whether FCLK or HCLK
is fed to the ARM core.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 3a38e4be
...@@ -44,15 +44,52 @@ ...@@ -44,15 +44,52 @@
#include <asm/plat-s3c24xx/clock.h> #include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/cpu.h> #include <asm/plat-s3c24xx/cpu.h>
static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
{
unsigned long camdivn;
unsigned long dvs;
if (parent == &clk_f)
dvs = 0;
else if (parent == &clk_h)
dvs = S3C2440_CAMDIVN_DVSEN;
else
return -EINVAL;
clk->parent = parent;
camdivn = __raw_readl(S3C2440_CAMDIVN);
camdivn &= ~S3C2440_CAMDIVN_DVSEN;
camdivn |= dvs;
__raw_writel(camdivn, S3C2440_CAMDIVN);
return 0;
}
static struct clk clk_arm = {
.name = "armclk",
.id = -1,
.set_parent = s3c2440_setparent_armclk,
};
static int s3c244x_clk_add(struct sys_device *sysdev) static int s3c244x_clk_add(struct sys_device *sysdev)
{ {
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn; unsigned long clkdivn;
struct clk *clock_upll; struct clk *clock_upll;
int ret;
printk("S3C244X: Clock Support, DVS %s\n", printk("S3C244X: Clock Support, DVS %s\n",
(camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
ret = s3c24xx_register_clock(&clk_arm);
if (ret < 0) {
printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
return ret;
}
clock_upll = clk_get(NULL, "upll"); clock_upll = clk_get(NULL, "upll");
if (IS_ERR(clock_upll)) { if (IS_ERR(clock_upll)) {
printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册