[PATCH] net: fix bonding with spider_net

Another small update for the spidernet driver to fix a bug encountered
during testing our latest hardware with dual-ethernet support.
Signed-off-by: NArnd Bergmann <arndb@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

drivers/net/spider_net.c

@@ -1292,23 +1292,29 @@ static int
 spider_net_set_mac(struct net_device *netdev, void *p)
 {
 	struct spider_net_card *card = netdev_priv(netdev);
-	u32 macl, macu;
+	u32 macl, macu, regvalue;
 	struct sockaddr *addr = p;
 
-	/* GMACTPE and GMACRPE must be off, so we only allow this, if
-	 * the device is down */
-	if (netdev->flags & IFF_UP)
-		return -EBUSY;
-
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 
+	/* switch off GMACTPE and GMACRPE */
+	regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
+	regvalue &= ~((1 << 5) | (1 << 6));
+	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
+
+	/* write mac */
 	macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) +
 		(addr->sa_data[2]<<8) + (addr->sa_data[3]);
 	macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]);
 	spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu);
 	spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl);
 
+	/* switch GMACTPE and GMACRPE back on */
+	regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
+	regvalue |= ((1 << 5) | (1 << 6));
+	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
+
 	spider_net_set_promisc(card);
 
 	/* look up, whether we have been successful */

drivers/net/spider_net_ethtool.c

@@ -27,6 +27,24 @@
 
 #include "spider_net.h"
 
+static int
+spider_net_ethtool_get_settings(struct net_device *netdev,
+			       struct ethtool_cmd *cmd)
+{
+	struct spider_net_card *card;
+	card = netdev_priv(netdev);
+
+	cmd->supported   = (SUPPORTED_1000baseT_Full |
+			     SUPPORTED_FIBRE);
+	cmd->advertising = (ADVERTISED_1000baseT_Full |
+			     ADVERTISED_FIBRE);
+	cmd->port = PORT_FIBRE;
+	cmd->speed = card->phy.speed;
+	cmd->duplex = DUPLEX_FULL;
+
+	return 0;
+}
+
 static void
 spider_net_ethtool_get_drvinfo(struct net_device *netdev,
 			       struct ethtool_drvinfo *drvinfo)
@@ -96,6 +114,7 @@ spider_net_ethtool_set_rx_csum(struct net_device *netdev, u32 n)
 }
 
 struct ethtool_ops spider_net_ethtool_ops = {
+	.get_settings		= spider_net_ethtool_get_settings,
 	.get_drvinfo		= spider_net_ethtool_get_drvinfo,
 	.get_wol		= spider_net_ethtool_get_wol,
 	.get_msglevel		= spider_net_ethtool_get_msglevel,