Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 053fdb85 编写于 作者: F Fernando Guzman Lugo 提交者： Greg Kroah-Hartman
浏览文件
操作

staging: tidspbridge - remove hw directory 

hw directory was only being used for custom iommu implementation
APIs, so after the iommu module migration this directory is not
needed anymore.
Signed-off-by: NFernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 f265846d
隐藏空白更改
内联 并排
Showing with 2 addition and 1148 deletion
drivers/staging/tidspbridge/Makefile
浏览文件 @ 053fdb85
......@@ -11,10 +11,9 @@ librmgr = rmgr/dbdcd.o rmgr/disp.o rmgr/drv.o rmgr/mgr.o rmgr/node.o \
rmgr/nldr.o rmgr/drv_interface.o
libdload = dynload/cload.o dynload/getsection.o dynload/reloc.o \
dynload/tramp.o
libhw = hw/hw_mmu.o
bridgedriver-objs = $(libgen) $(libservices) $(libcore) $(libpmgr) $(librmgr) \
$(libdload) $(libhw)
$(libdload)
#Machine dependent
ccflags-y += -D_TI_ -D_DB_TIOMAP -DTMS32060 \
......
drivers/staging/tidspbridge/core/_tiomap.h
浏览文件 @ 053fdb85
......@@ -26,7 +26,6 @@
#include <plat/iommu.h>
#include <plat/iovmm.h>
#include <dspbridge/devdefs.h>
#include <hw_defs.h>
#include <dspbridge/dspioctl.h> /* for bridge_ioctl_extproc defn */
#include <dspbridge/sync.h>
#include <dspbridge/clk.h>
......
drivers/staging/tidspbridge/core/io_sm.c
浏览文件 @ 053fdb85
......@@ -39,10 +39,6 @@
#include <dspbridge/ntfy.h>
#include <dspbridge/sync.h>
/* Hardware Abstraction Layer */
#include <hw_defs.h>
#include <hw_mmu.h>
/* Bridge Driver */
#include <dspbridge/dspdeh.h>
#include <dspbridge/dspio.h>
......
drivers/staging/tidspbridge/core/tiomap3430.c
浏览文件 @ 053fdb85
......@@ -35,10 +35,6 @@
#include <dspbridge/drv.h>
#include <dspbridge/sync.h>
/* ------------------------------------ Hardware Abstraction Layer */
#include <hw_defs.h>
#include <hw_mmu.h>
/* ----------------------------------- Link Driver */
#include <dspbridge/dspdefs.h>
#include <dspbridge/dspchnl.h>
......
drivers/staging/tidspbridge/core/tiomap3430_pwr.c
浏览文件 @ 053fdb85
......@@ -31,10 +31,6 @@
#include <dspbridge/dev.h>
#include <dspbridge/iodefs.h>
/* ------------------------------------ Hardware Abstraction Layer */
#include <hw_defs.h>
#include <hw_mmu.h>
#include <dspbridge/pwr_sh.h>
/* ----------------------------------- Bridge Driver */
......
drivers/staging/tidspbridge/core/tiomap_io.c
浏览文件 @ 053fdb85
......@@ -143,7 +143,7 @@ int read_ext_dsp_data(struct bridge_dev_context *dev_ctxt,
ul_shm_base_virt - ul_tlb_base_virt;
ul_shm_offset_virt +=
PG_ALIGN_HIGH(ul_ext_end - ul_dyn_ext_base +
1, HW_PAGE_SIZE64KB);
1, PAGE_SIZE * 16);
dw_ext_prog_virt_mem -= ul_shm_offset_virt;
dw_ext_prog_virt_mem +=
(ul_ext_base - ul_dyn_ext_base);
......
drivers/staging/tidspbridge/hw/EasiGlobal.h 已删除 100644 → 0
浏览文件 @ f265846d
/*
* EasiGlobal.h
*
* DSP-BIOS Bridge driver support functions for TI OMAP processors.
*
* Copyright (C) 2007 Texas Instruments, Inc.
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#ifndef _EASIGLOBAL_H
#define _EASIGLOBAL_H
#include <linux/types.h>
/*
* DEFINE: READ_ONLY, WRITE_ONLY & READ_WRITE
*
* DESCRIPTION: Defines used to describe register types for EASI-checker tests.
*/
#define READ_ONLY 1
#define WRITE_ONLY 2
#define READ_WRITE 3
/*
* MACRO: _DEBUG_LEVEL1_EASI
*
* DESCRIPTION: A MACRO which can be used to indicate that a particular beach
* register access function was called.
*
* NOTE: We currently dont use this functionality.
*/
#define _DEBUG_LEVEL1_EASI(easi_num) ((void)0)
#endif /* _EASIGLOBAL_H */
drivers/staging/tidspbridge/hw/MMUAccInt.h 已删除 100644 → 0
浏览文件 @ f265846d
/*
* MMUAccInt.h
*
* DSP-BIOS Bridge driver support functions for TI OMAP processors.
*
* Copyright (C) 2007 Texas Instruments, Inc.
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#ifndef _MMU_ACC_INT_H
#define _MMU_ACC_INT_H
/* Mappings of level 1 EASI function numbers to function names */
#define EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32 (MMU_BASE_EASIL1 + 3)
#define EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32 (MMU_BASE_EASIL1 + 17)
#define EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32 (MMU_BASE_EASIL1 + 39)
#define EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 51)
#define EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32 (MMU_BASE_EASIL1 + 102)
#define EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 103)
#define EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32 (MMU_BASE_EASIL1 + 156)
#define EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32 (MMU_BASE_EASIL1 + 174)
#define EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32 (MMU_BASE_EASIL1 + 180)
#define EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32 (MMU_BASE_EASIL1 + 190)
#define EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32 (MMU_BASE_EASIL1 + 194)
#define EASIL1_MMUMMU_TTB_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 198)
#define EASIL1_MMUMMU_LOCK_READ_REGISTER32 (MMU_BASE_EASIL1 + 203)
#define EASIL1_MMUMMU_LOCK_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 204)
#define EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32 (MMU_BASE_EASIL1 + 205)
#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32 (MMU_BASE_EASIL1 + 209)
#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32 (MMU_BASE_EASIL1 + 211)
#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32 (MMU_BASE_EASIL1 + 212)
#define EASIL1_MMUMMU_LD_TLB_READ_REGISTER32 (MMU_BASE_EASIL1 + 213)
#define EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 214)
#define EASIL1_MMUMMU_CAM_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 226)
#define EASIL1_MMUMMU_RAM_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 268)
#define EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 322)
/* Register offset address definitions */
#define MMU_MMU_SYSCONFIG_OFFSET 0x10
#define MMU_MMU_IRQSTATUS_OFFSET 0x18
#define MMU_MMU_IRQENABLE_OFFSET 0x1c
#define MMU_MMU_WALKING_ST_OFFSET 0x40
#define MMU_MMU_CNTL_OFFSET 0x44
#define MMU_MMU_FAULT_AD_OFFSET 0x48
#define MMU_MMU_TTB_OFFSET 0x4c
#define MMU_MMU_LOCK_OFFSET 0x50
#define MMU_MMU_LD_TLB_OFFSET 0x54
#define MMU_MMU_CAM_OFFSET 0x58
#define MMU_MMU_RAM_OFFSET 0x5c
#define MMU_MMU_GFLUSH_OFFSET 0x60
#define MMU_MMU_FLUSH_ENTRY_OFFSET 0x64
/* Bitfield mask and offset declarations */
#define MMU_MMU_SYSCONFIG_IDLE_MODE_MASK 0x18
#define MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET 3
#define MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK 0x1
#define MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET 0
#define MMU_MMU_WALKING_ST_TWL_RUNNING_MASK 0x1
#define MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET 0
#define MMU_MMU_CNTL_TWL_ENABLE_MASK 0x4
#define MMU_MMU_CNTL_TWL_ENABLE_OFFSET 2
#define MMU_MMU_CNTL_MMU_ENABLE_MASK 0x2
#define MMU_MMU_CNTL_MMU_ENABLE_OFFSET 1
#define MMU_MMU_LOCK_BASE_VALUE_MASK 0xfc00
#define MMU_MMU_LOCK_BASE_VALUE_OFFSET 10
#define MMU_MMU_LOCK_CURRENT_VICTIM_MASK 0x3f0
#define MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET 4
#endif /* _MMU_ACC_INT_H */
drivers/staging/tidspbridge/hw/MMURegAcM.h 已删除 100644 → 0
浏览文件 @ f265846d
/*
* MMURegAcM.h
*
* DSP-BIOS Bridge driver support functions for TI OMAP processors.
*
* Copyright (C) 2007 Texas Instruments, Inc.
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#ifndef _MMU_REG_ACM_H
#define _MMU_REG_ACM_H
#include <linux/io.h>
#include <EasiGlobal.h>
#include "MMUAccInt.h"
#if defined(USE_LEVEL_1_MACROS)
#define MMUMMU_SYSCONFIG_READ_REGISTER32(base_address)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32),\
__raw_readl((base_address)+MMU_MMU_SYSCONFIG_OFFSET))
#define MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32(base_address, value)\
{\
const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
register u32 data = __raw_readl((base_address)+offset);\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32);\
data &= ~(MMU_MMU_SYSCONFIG_IDLE_MODE_MASK);\
new_value <<= MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET;\
new_value &= MMU_MMU_SYSCONFIG_IDLE_MODE_MASK;\
new_value |= data;\
__raw_writel(new_value, base_address+offset);\
}
#define MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32(base_address, value)\
{\
const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
register u32 data = __raw_readl((base_address)+offset);\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32);\
data &= ~(MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK);\
new_value <<= MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET;\
new_value &= MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK;\
new_value |= data;\
__raw_writel(new_value, base_address+offset);\
}
#define MMUMMU_IRQSTATUS_READ_REGISTER32(base_address)\
(_DEBUG_LEVEL1_EASI(easil1_mmummu_irqstatus_read_register32),\
__raw_readl((base_address)+MMU_MMU_IRQSTATUS_OFFSET))
#define MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, value)\
{\
const u32 offset = MMU_MMU_IRQSTATUS_OFFSET;\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32);\
__raw_writel(new_value, (base_address)+offset);\
}
#define MMUMMU_IRQENABLE_READ_REGISTER32(base_address)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32),\
__raw_readl((base_address)+MMU_MMU_IRQENABLE_OFFSET))
#define MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, value)\
{\
const u32 offset = MMU_MMU_IRQENABLE_OFFSET;\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32);\
__raw_writel(new_value, (base_address)+offset);\
}
#define MMUMMU_WALKING_STTWL_RUNNING_READ32(base_address)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32),\
(((__raw_readl(((base_address)+(MMU_MMU_WALKING_ST_OFFSET))))\
& MMU_MMU_WALKING_ST_TWL_RUNNING_MASK) >>\
MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET))
#define MMUMMU_CNTLTWL_ENABLE_READ32(base_address)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32),\
(((__raw_readl(((base_address)+(MMU_MMU_CNTL_OFFSET)))) &\
MMU_MMU_CNTL_TWL_ENABLE_MASK) >>\
MMU_MMU_CNTL_TWL_ENABLE_OFFSET))
#define MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, value)\
{\
const u32 offset = MMU_MMU_CNTL_OFFSET;\
register u32 data = __raw_readl((base_address)+offset);\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32);\
data &= ~(MMU_MMU_CNTL_TWL_ENABLE_MASK);\
new_value <<= MMU_MMU_CNTL_TWL_ENABLE_OFFSET;\
new_value &= MMU_MMU_CNTL_TWL_ENABLE_MASK;\
new_value |= data;\
__raw_writel(new_value, base_address+offset);\
}
#define MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, value)\
{\
const u32 offset = MMU_MMU_CNTL_OFFSET;\
register u32 data = __raw_readl((base_address)+offset);\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32);\
data &= ~(MMU_MMU_CNTL_MMU_ENABLE_MASK);\
new_value <<= MMU_MMU_CNTL_MMU_ENABLE_OFFSET;\
new_value &= MMU_MMU_CNTL_MMU_ENABLE_MASK;\
new_value |= data;\
__raw_writel(new_value, base_address+offset);\
}
#define MMUMMU_FAULT_AD_READ_REGISTER32(base_address)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32),\
__raw_readl((base_address)+MMU_MMU_FAULT_AD_OFFSET))
#define MMUMMU_TTB_WRITE_REGISTER32(base_address, value)\
{\
const u32 offset = MMU_MMU_TTB_OFFSET;\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_TTB_WRITE_REGISTER32);\
__raw_writel(new_value, (base_address)+offset);\
}
#define MMUMMU_LOCK_READ_REGISTER32(base_address)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_READ_REGISTER32),\
__raw_readl((base_address)+MMU_MMU_LOCK_OFFSET))
#define MMUMMU_LOCK_WRITE_REGISTER32(base_address, value)\
{\
const u32 offset = MMU_MMU_LOCK_OFFSET;\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_WRITE_REGISTER32);\
__raw_writel(new_value, (base_address)+offset);\
}
#define MMUMMU_LOCK_BASE_VALUE_READ32(base_address)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32),\
(((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
MMU_MMU_LOCK_BASE_VALUE_MASK) >>\
MMU_MMU_LOCK_BASE_VALUE_OFFSET))
#define MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, value)\
{\
const u32 offset = MMU_MMU_LOCK_OFFSET;\
register u32 data = __raw_readl((base_address)+offset);\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(easil1_mmummu_lock_base_value_write32);\
data &= ~(MMU_MMU_LOCK_BASE_VALUE_MASK);\
new_value <<= MMU_MMU_LOCK_BASE_VALUE_OFFSET;\
new_value &= MMU_MMU_LOCK_BASE_VALUE_MASK;\
new_value |= data;\
__raw_writel(new_value, base_address+offset);\
}
#define MMUMMU_LOCK_CURRENT_VICTIM_READ32(base_address)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32),\
(((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
MMU_MMU_LOCK_CURRENT_VICTIM_MASK) >>\
MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET))
#define MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, value)\
{\
const u32 offset = MMU_MMU_LOCK_OFFSET;\
register u32 data = __raw_readl((base_address)+offset);\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32);\
data &= ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK);\
new_value <<= MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET;\
new_value &= MMU_MMU_LOCK_CURRENT_VICTIM_MASK;\
new_value |= data;\
__raw_writel(new_value, base_address+offset);\
}
#define MMUMMU_LOCK_CURRENT_VICTIM_SET32(var, value)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32),\
(((var) & ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK)) |\
(((value) << MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET) &\
MMU_MMU_LOCK_CURRENT_VICTIM_MASK)))
#define MMUMMU_LD_TLB_READ_REGISTER32(base_address)\
(_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_READ_REGISTER32),\
__raw_readl((base_address)+MMU_MMU_LD_TLB_OFFSET))
#define MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, value)\
{\
const u32 offset = MMU_MMU_LD_TLB_OFFSET;\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32);\
__raw_writel(new_value, (base_address)+offset);\
}
#define MMUMMU_CAM_WRITE_REGISTER32(base_address, value)\
{\
const u32 offset = MMU_MMU_CAM_OFFSET;\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CAM_WRITE_REGISTER32);\
__raw_writel(new_value, (base_address)+offset);\
}
#define MMUMMU_RAM_WRITE_REGISTER32(base_address, value)\
{\
const u32 offset = MMU_MMU_RAM_OFFSET;\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_RAM_WRITE_REGISTER32);\
__raw_writel(new_value, (base_address)+offset);\
}
#define MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, value)\
{\
const u32 offset = MMU_MMU_FLUSH_ENTRY_OFFSET;\
register u32 new_value = (value);\
_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32);\
__raw_writel(new_value, (base_address)+offset);\
}
#endif /* USE_LEVEL_1_MACROS */
#endif /* _MMU_REG_ACM_H */
drivers/staging/tidspbridge/hw/hw_defs.h 已删除 100644 → 0
浏览文件 @ f265846d
/*
* hw_defs.h
*
* DSP-BIOS Bridge driver support functions for TI OMAP processors.
*
* Global HW definitions
*
* Copyright (C) 2007 Texas Instruments, Inc.
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#ifndef _HW_DEFS_H
#define _HW_DEFS_H
/* Page size */
#define HW_PAGE_SIZE4KB 0x1000
#define HW_PAGE_SIZE64KB 0x10000
#define HW_PAGE_SIZE1MB 0x100000
#define HW_PAGE_SIZE16MB 0x1000000
/* hw_status: return type for HW API */
typedef long hw_status;
/* Macro used to set and clear any bit */
#define HW_CLEAR 0
#define HW_SET 1
/* hw_endianism_t: Enumerated Type used to specify the endianism
* Do NOT change these values. They are used as bit fields. */
enum hw_endianism_t {
HW_LITTLE_ENDIAN,
HW_BIG_ENDIAN
};
/* hw_element_size_t: Enumerated Type used to specify the element size
* Do NOT change these values. They are used as bit fields. */
enum hw_element_size_t {
HW_ELEM_SIZE8BIT,
HW_ELEM_SIZE16BIT,
HW_ELEM_SIZE32BIT,
HW_ELEM_SIZE64BIT
};
/* hw_idle_mode_t: Enumerated Type used to specify Idle modes */
enum hw_idle_mode_t {
HW_FORCE_IDLE,
HW_NO_IDLE,
HW_SMART_IDLE
};
#endif /* _HW_DEFS_H */
drivers/staging/tidspbridge/hw/hw_mmu.c 已删除 100644 → 0
浏览文件 @ f265846d
/*
* hw_mmu.c
*
* DSP-BIOS Bridge driver support functions for TI OMAP processors.
*
* API definitions to setup MMU TLB and PTE
*
* Copyright (C) 2007 Texas Instruments, Inc.
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#include <linux/io.h>
#include "MMURegAcM.h"
#include <hw_defs.h>
#include <hw_mmu.h>
#include <linux/types.h>
#include <linux/err.h>
#define MMU_BASE_VAL_MASK 0xFC00
#define MMU_PAGE_MAX 3
#define MMU_ELEMENTSIZE_MAX 3
#define MMU_ADDR_MASK 0xFFFFF000
#define MMU_TTB_MASK 0xFFFFC000
#define MMU_SECTION_ADDR_MASK 0xFFF00000
#define MMU_SSECTION_ADDR_MASK 0xFF000000
#define MMU_PAGE_TABLE_MASK 0xFFFFFC00
#define MMU_LARGE_PAGE_MASK 0xFFFF0000
#define MMU_SMALL_PAGE_MASK 0xFFFFF000
#define MMU_LOAD_TLB 0x00000001
#define MMU_GFLUSH 0x60
/*
* hw_mmu_page_size_t: Enumerated Type used to specify the MMU Page Size(SLSS)
*/
enum hw_mmu_page_size_t {
HW_MMU_SECTION,
HW_MMU_LARGE_PAGE,
HW_MMU_SMALL_PAGE,
HW_MMU_SUPERSECTION
};
/*
* FUNCTION : mmu_flush_entry
*
* INPUTS:
*
* Identifier : base_address
* Type : const u32
* Description : Base Address of instance of MMU module
*
* RETURNS:
*
* Type : hw_status
* Description : 0 -- No errors occured
* RET_BAD_NULL_PARAM -- A Pointer
* Paramater was set to NULL
*
* PURPOSE: : Flush the TLB entry pointed by the
* lock counter register
* even if this entry is set protected
*
* METHOD: : Check the Input parameter and Flush a
* single entry in the TLB.
*/
static hw_status mmu_flush_entry(const void __iomem *base_address);
/*
* FUNCTION : mmu_set_cam_entry
*
* INPUTS:
*
* Identifier : base_address
* TypE : const u32
* Description : Base Address of instance of MMU module
*
* Identifier : page_sz
* TypE : const u32
* Description : It indicates the page size
*
* Identifier : preserved_bit
* Type : const u32
* Description : It indicates the TLB entry is preserved entry
* or not
*
* Identifier : valid_bit
* Type : const u32
* Description : It indicates the TLB entry is valid entry or not
*
*
* Identifier : virtual_addr_tag
* Type : const u32
* Description : virtual Address
*
* RETURNS:
*
* Type : hw_status
* Description : 0 -- No errors occured
* RET_BAD_NULL_PARAM -- A Pointer Paramater
* was set to NULL
* RET_PARAM_OUT_OF_RANGE -- Input Parameter out
* of Range
*
* PURPOSE: : Set MMU_CAM reg
*
* METHOD: : Check the Input parameters and set the CAM entry.
*/
static hw_status mmu_set_cam_entry(const void __iomem *base_address,
const u32 page_sz,
const u32 preserved_bit,
const u32 valid_bit,
const u32 virtual_addr_tag);
/*
* FUNCTION : mmu_set_ram_entry
*
* INPUTS:
*
* Identifier : base_address
* Type : const u32
* Description : Base Address of instance of MMU module
*
* Identifier : physical_addr
* Type : const u32
* Description : Physical Address to which the corresponding
* virtual Address shouldpoint
*
* Identifier : endianism
* Type : hw_endianism_t
* Description : endianism for the given page
*
* Identifier : element_size
* Type : hw_element_size_t
* Description : The element size ( 8,16, 32 or 64 bit)
*
* Identifier : mixed_size
* Type : hw_mmu_mixed_size_t
* Description : Element Size to follow CPU or TLB
*
* RETURNS:
*
* Type : hw_status
* Description : 0 -- No errors occured
* RET_BAD_NULL_PARAM -- A Pointer Paramater
* was set to NULL
* RET_PARAM_OUT_OF_RANGE -- Input Parameter
* out of Range
*
* PURPOSE: : Set MMU_CAM reg
*
* METHOD: : Check the Input parameters and set the RAM entry.
*/
static hw_status mmu_set_ram_entry(const void __iomem *base_address,
const u32 physical_addr,
enum hw_endianism_t endianism,
enum hw_element_size_t element_size,
enum hw_mmu_mixed_size_t mixed_size);
/* HW FUNCTIONS */
hw_status hw_mmu_enable(const void __iomem *base_address)
{
hw_status status = 0;
MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_SET);
return status;
}
hw_status hw_mmu_disable(const void __iomem *base_address)
{
hw_status status = 0;
MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_CLEAR);
return status;
}
hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
u32 num_locked_entries)
{
hw_status status = 0;
MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, num_locked_entries);
return status;
}
hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
u32 victim_entry_num)
{
hw_status status = 0;
MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, victim_entry_num);
return status;
}
hw_status hw_mmu_event_ack(const void __iomem *base_address, u32 irq_mask)
{
hw_status status = 0;
MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, irq_mask);
return status;
}
hw_status hw_mmu_event_disable(const void __iomem *base_address, u32 irq_mask)
{
hw_status status = 0;
u32 irq_reg;
irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg & ~irq_mask);
return status;
}
hw_status hw_mmu_event_enable(const void __iomem *base_address, u32 irq_mask)
{
hw_status status = 0;
u32 irq_reg;
irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg | irq_mask);
return status;
}
hw_status hw_mmu_event_status(const void __iomem *base_address, u32 *irq_mask)
{
hw_status status = 0;
*irq_mask = MMUMMU_IRQSTATUS_READ_REGISTER32(base_address);
return status;
}
hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, u32 *addr)
{
hw_status status = 0;
/* read values from register */
*addr = MMUMMU_FAULT_AD_READ_REGISTER32(base_address);
return status;
}
hw_status hw_mmu_ttb_set(const void __iomem *base_address, u32 ttb_phys_addr)
{
hw_status status = 0;
u32 load_ttb;
load_ttb = ttb_phys_addr & ~0x7FUL;
/* write values to register */
MMUMMU_TTB_WRITE_REGISTER32(base_address, load_ttb);
return status;
}
hw_status hw_mmu_twl_enable(const void __iomem *base_address)
{
hw_status status = 0;
MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_SET);
return status;
}
hw_status hw_mmu_twl_disable(const void __iomem *base_address)
{
hw_status status = 0;
MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_CLEAR);
return status;
}
hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr,
u32 page_sz)
{
hw_status status = 0;
u32 virtual_addr_tag;
enum hw_mmu_page_size_t pg_size_bits;
switch (page_sz) {
case HW_PAGE_SIZE4KB:
pg_size_bits = HW_MMU_SMALL_PAGE;
break;
case HW_PAGE_SIZE64KB:
pg_size_bits = HW_MMU_LARGE_PAGE;
break;
case HW_PAGE_SIZE1MB:
pg_size_bits = HW_MMU_SECTION;
break;
case HW_PAGE_SIZE16MB:
pg_size_bits = HW_MMU_SUPERSECTION;
break;
default:
return -EINVAL;
}
/* Generate the 20-bit tag from virtual address */
virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
mmu_set_cam_entry(base_address, pg_size_bits, 0, 0, virtual_addr_tag);
mmu_flush_entry(base_address);
return status;
}
hw_status hw_mmu_tlb_add(const void __iomem *base_address,
u32 physical_addr,
u32 virtual_addr,
u32 page_sz,
u32 entry_num,
struct hw_mmu_map_attrs_t *map_attrs,
s8 preserved_bit, s8 valid_bit)
{
hw_status status = 0;
u32 lock_reg;
u32 virtual_addr_tag;
enum hw_mmu_page_size_t mmu_pg_size;
/*Check the input Parameters */
switch (page_sz) {
case HW_PAGE_SIZE4KB:
mmu_pg_size = HW_MMU_SMALL_PAGE;
break;
case HW_PAGE_SIZE64KB:
mmu_pg_size = HW_MMU_LARGE_PAGE;
break;
case HW_PAGE_SIZE1MB:
mmu_pg_size = HW_MMU_SECTION;
break;
case HW_PAGE_SIZE16MB:
mmu_pg_size = HW_MMU_SUPERSECTION;
break;
default:
return -EINVAL;
}
lock_reg = MMUMMU_LOCK_READ_REGISTER32(base_address);
/* Generate the 20-bit tag from virtual address */
virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
/* Write the fields in the CAM Entry Register */
mmu_set_cam_entry(base_address, mmu_pg_size, preserved_bit, valid_bit,
virtual_addr_tag);
/* Write the different fields of the RAM Entry Register */
/* endianism of the page,Element Size of the page (8, 16, 32, 64 bit) */
mmu_set_ram_entry(base_address, physical_addr, map_attrs->endianism,
map_attrs->element_size, map_attrs->mixed_size);
/* Update the MMU Lock Register */
/* currentVictim between lockedBaseValue and (MMU_Entries_Number - 1) */
MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, entry_num);
/* Enable loading of an entry in TLB by writing 1
into LD_TLB_REG register */
MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, MMU_LOAD_TLB);
MMUMMU_LOCK_WRITE_REGISTER32(base_address, lock_reg);
return status;
}
hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
u32 physical_addr,
u32 virtual_addr,
u32 page_sz, struct hw_mmu_map_attrs_t *map_attrs)
{
hw_status status = 0;
u32 pte_addr, pte_val;
s32 num_entries = 1;
switch (page_sz) {
case HW_PAGE_SIZE4KB:
pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
virtual_addr &
MMU_SMALL_PAGE_MASK);
pte_val =
((physical_addr & MMU_SMALL_PAGE_MASK) |
(map_attrs->endianism << 9) | (map_attrs->
element_size << 4) |
(map_attrs->mixed_size << 11) | 2);
break;
case HW_PAGE_SIZE64KB:
num_entries = 16;
pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
virtual_addr &
MMU_LARGE_PAGE_MASK);
pte_val =
((physical_addr & MMU_LARGE_PAGE_MASK) |
(map_attrs->endianism << 9) | (map_attrs->
element_size << 4) |
(map_attrs->mixed_size << 11) | 1);
break;
case HW_PAGE_SIZE1MB:
pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
virtual_addr &
MMU_SECTION_ADDR_MASK);
pte_val =
((((physical_addr & MMU_SECTION_ADDR_MASK) |
(map_attrs->endianism << 15) | (map_attrs->
element_size << 10) |
(map_attrs->mixed_size << 17)) & ~0x40000) | 0x2);
break;
case HW_PAGE_SIZE16MB:
num_entries = 16;
pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
virtual_addr &
MMU_SSECTION_ADDR_MASK);
pte_val =
(((physical_addr & MMU_SSECTION_ADDR_MASK) |
(map_attrs->endianism << 15) | (map_attrs->
element_size << 10) |
(map_attrs->mixed_size << 17)
) | 0x40000 | 0x2);
break;
case HW_MMU_COARSE_PAGE_SIZE:
pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
virtual_addr &
MMU_SECTION_ADDR_MASK);
pte_val = (physical_addr & MMU_PAGE_TABLE_MASK) | 1;
break;
default:
return -EINVAL;
}
while (--num_entries >= 0)
((u32 *) pte_addr)[num_entries] = pte_val;
return status;
}
hw_status hw_mmu_pte_clear(const u32 pg_tbl_va, u32 virtual_addr, u32 page_size)
{
hw_status status = 0;
u32 pte_addr;
s32 num_entries = 1;
switch (page_size) {
case HW_PAGE_SIZE4KB:
pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
virtual_addr &
MMU_SMALL_PAGE_MASK);
break;
case HW_PAGE_SIZE64KB:
num_entries = 16;
pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
virtual_addr &
MMU_LARGE_PAGE_MASK);
break;
case HW_PAGE_SIZE1MB:
case HW_MMU_COARSE_PAGE_SIZE:
pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
virtual_addr &
MMU_SECTION_ADDR_MASK);
break;
case HW_PAGE_SIZE16MB:
num_entries = 16;
pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
virtual_addr &
MMU_SSECTION_ADDR_MASK);
break;
default:
return -EINVAL;
}
while (--num_entries >= 0)
((u32 *) pte_addr)[num_entries] = 0;
return status;
}
/* mmu_flush_entry */
static hw_status mmu_flush_entry(const void __iomem *base_address)
{
hw_status status = 0;
u32 flush_entry_data = 0x1;
/* write values to register */
MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, flush_entry_data);
return status;
}
/* mmu_set_cam_entry */
static hw_status mmu_set_cam_entry(const void __iomem *base_address,
const u32 page_sz,
const u32 preserved_bit,
const u32 valid_bit,
const u32 virtual_addr_tag)
{
hw_status status = 0;
u32 mmu_cam_reg;
mmu_cam_reg = (virtual_addr_tag << 12);
mmu_cam_reg = (mmu_cam_reg) | (page_sz) | (valid_bit << 2) |
(preserved_bit << 3);
/* write values to register */
MMUMMU_CAM_WRITE_REGISTER32(base_address, mmu_cam_reg);
return status;
}
/* mmu_set_ram_entry */
static hw_status mmu_set_ram_entry(const void __iomem *base_address,
const u32 physical_addr,
enum hw_endianism_t endianism,
enum hw_element_size_t element_size,
enum hw_mmu_mixed_size_t mixed_size)
{
hw_status status = 0;
u32 mmu_ram_reg;
mmu_ram_reg = (physical_addr & MMU_ADDR_MASK);
mmu_ram_reg = (mmu_ram_reg) | ((endianism << 9) | (element_size << 7) |
(mixed_size << 6));
/* write values to register */
MMUMMU_RAM_WRITE_REGISTER32(base_address, mmu_ram_reg);
return status;
}
void hw_mmu_tlb_flush_all(const void __iomem *base)
{
__raw_writeb(1, base + MMU_GFLUSH);
}
drivers/staging/tidspbridge/hw/hw_mmu.h 已删除 100644 → 0
浏览文件 @ f265846d
/*
* hw_mmu.h
*
* DSP-BIOS Bridge driver support functions for TI OMAP processors.
*
* MMU types and API declarations
*
* Copyright (C) 2007 Texas Instruments, Inc.
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#ifndef _HW_MMU_H
#define _HW_MMU_H
#include <linux/types.h>
/* Bitmasks for interrupt sources */
#define HW_MMU_TRANSLATION_FAULT 0x2
#define HW_MMU_ALL_INTERRUPTS 0x1F
#define HW_MMU_COARSE_PAGE_SIZE 0x400
/* hw_mmu_mixed_size_t: Enumerated Type used to specify whether to follow
CPU/TLB Element size */
enum hw_mmu_mixed_size_t {
HW_MMU_TLBES,
HW_MMU_CPUES
};
/* hw_mmu_map_attrs_t: Struct containing MMU mapping attributes */
struct hw_mmu_map_attrs_t {
enum hw_endianism_t endianism;
enum hw_element_size_t element_size;
enum hw_mmu_mixed_size_t mixed_size;
bool donotlockmpupage;
};
extern hw_status hw_mmu_enable(const void __iomem *base_address);
extern hw_status hw_mmu_disable(const void __iomem *base_address);
extern hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
u32 num_locked_entries);
extern hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
u32 victim_entry_num);
/* For MMU faults */
extern hw_status hw_mmu_event_ack(const void __iomem *base_address,
u32 irq_mask);
extern hw_status hw_mmu_event_disable(const void __iomem *base_address,
u32 irq_mask);
extern hw_status hw_mmu_event_enable(const void __iomem *base_address,
u32 irq_mask);
extern hw_status hw_mmu_event_status(const void __iomem *base_address,
u32 *irq_mask);
extern hw_status hw_mmu_fault_addr_read(const void __iomem *base_address,
u32 *addr);
/* Set the TT base address */
extern hw_status hw_mmu_ttb_set(const void __iomem *base_address,
u32 ttb_phys_addr);
extern hw_status hw_mmu_twl_enable(const void __iomem *base_address);
extern hw_status hw_mmu_twl_disable(const void __iomem *base_address);
extern hw_status hw_mmu_tlb_flush(const void __iomem *base_address,
u32 virtual_addr, u32 page_sz);
extern hw_status hw_mmu_tlb_add(const void __iomem *base_address,
u32 physical_addr,
u32 virtual_addr,
u32 page_sz,
u32 entry_num,
struct hw_mmu_map_attrs_t *map_attrs,
s8 preserved_bit, s8 valid_bit);
/* For PTEs */
extern hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
u32 physical_addr,
u32 virtual_addr,
u32 page_sz,
struct hw_mmu_map_attrs_t *map_attrs);
extern hw_status hw_mmu_pte_clear(const u32 pg_tbl_va,
u32 virtual_addr, u32 page_size);
void hw_mmu_tlb_flush_all(const void __iomem *base);
static inline u32 hw_mmu_pte_addr_l1(u32 l1_base, u32 va)
{
u32 pte_addr;
u32 va31_to20;
va31_to20 = va >> (20 - 2); /* Left-shift by 2 here itself */
va31_to20 &= 0xFFFFFFFCUL;
pte_addr = l1_base + va31_to20;
return pte_addr;
}
static inline u32 hw_mmu_pte_addr_l2(u32 l2_base, u32 va)
{
u32 pte_addr;
pte_addr = (l2_base & 0xFFFFFC00) | ((va >> 10) & 0x3FC);
return pte_addr;
}
static inline u32 hw_mmu_pte_coarse_l1(u32 pte_val)
{
u32 pte_coarse;
pte_coarse = pte_val & 0xFFFFFC00;
return pte_coarse;
}
static inline u32 hw_mmu_pte_size_l1(u32 pte_val)
{
u32 pte_size = 0;
if ((pte_val & 0x3) == 0x1) {
/* Points to L2 PT */
pte_size = HW_MMU_COARSE_PAGE_SIZE;
}
if ((pte_val & 0x3) == 0x2) {
if (pte_val & (1 << 18))
pte_size = HW_PAGE_SIZE16MB;
else
pte_size = HW_PAGE_SIZE1MB;
}
return pte_size;
}
static inline u32 hw_mmu_pte_size_l2(u32 pte_val)
{
u32 pte_size = 0;
if (pte_val & 0x2)
pte_size = HW_PAGE_SIZE4KB;
else if (pte_val & 0x1)
pte_size = HW_PAGE_SIZE64KB;
return pte_size;
}
#endif /* _HW_MMU_H */
drivers/staging/tidspbridge/include/dspbridge/dspioctl.h
浏览文件 @ 053fdb85
......@@ -19,10 +19,6 @@
#ifndef DSPIOCTL_
#define DSPIOCTL_
/* ------------------------------------ Hardware Abstraction Layer */
#include <hw_defs.h>
#include <hw_mmu.h>
/*
* Any IOCTLS at or above this value are reserved for standard Bridge driver
* interfaces.
......@@ -65,9 +61,6 @@ struct bridge_ioctl_extproc {
/* GPP virtual address. __va does not work for ioremapped addresses */
u32 ul_gpp_va;
u32 ul_size; /* Size of the mapped memory in bytes */
enum hw_endianism_t endianism;
enum hw_mmu_mixed_size_t mixed_mode;
enum hw_element_size_t elem_size;
};
#endif /* DSPIOCTL_ */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或