pwm: samsung: Fix to use lowest div for large enough modulation bits

From pwm_samsung_calc_tin(), there is routine to find the lowest divider
possible to generate lower frequency than requested one. But it is
always possible to generate requested frequency with large enough
modulation bits except on s3c24xx, so this patch fixes to use lowest div
for the case. This patch removes following UBSAN warning:

   UBSAN: Undefined behaviour in drivers/pwm/pwm-samsung.c:197:13
   shift exponent 32 is too large for 32-bit type 'long unsigned int'
   [...]
   [<c0670248>] (ubsan_epilogue) from [<c06707b4>] (__ubsan_handle_shift_out_of_bounds+0xd8/0x120)
   [<c06707b4>] (__ubsan_handle_shift_out_of_bounds) from [<c0694b28>] (pwm_samsung_config+0x508/0x6a4)
   [<c0694b28>] (pwm_samsung_config) from [<c069286c>] (pwm_apply_state+0x174/0x40c)
   [<c069286c>] (pwm_apply_state) from [<c0b2e070>] (pwm_fan_probe+0xc8/0x488)
   [<c0b2e070>] (pwm_fan_probe) from [<c07ba8b0>] (platform_drv_probe+0x70/0x150)
   [...]

Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

drivers/pwm/pwm-samsung.c

@@ -193,9 +193,18 @@ static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip,
 	 * divider settings and choose the lowest divisor that can generate
 	 * frequencies lower than requested.
 	 */
-	for (div = variant->div_base; div < 4; ++div)
-		if ((rate >> (variant->bits + div)) < freq)
-			break;
+	if (variant->bits < 32) {
+		/* Only for s3c24xx */
+		for (div = variant->div_base; div < 4; ++div)
+			if ((rate >> (variant->bits + div)) < freq)
+				break;
+	} else {
+		/*
+		 * Other variants have enough counter bits to generate any
+		 * requested rate, so no need to check higher divisors.
+		 */
+		div = variant->div_base;
+	}
 
 	pwm_samsung_set_divisor(chip, chan, BIT(div));