提交 04577994 编写于 作者: H Haojian Zhuang 提交者: Mike Turquette

clk: gate: add CLK_GATE_HIWORD_MASK

In Rockchip Cortex-A9 based chips, they don't use paradigm of
reading-changing-writing the register contents.  Instead they
use a hiword mask to indicate the changed bits.

When b1 should be set as gate, it also needs to indicate the change
by setting hiword mask (b1 << 16).

The patch adds gate flag for this usage.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
上级 d57dfe75
...@@ -53,12 +53,18 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable) ...@@ -53,12 +53,18 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
if (gate->lock) if (gate->lock)
spin_lock_irqsave(gate->lock, flags); spin_lock_irqsave(gate->lock, flags);
reg = readl(gate->reg); if (gate->flags & CLK_GATE_HIWORD_MASK) {
reg = BIT(gate->bit_idx + 16);
if (set) if (set)
reg |= BIT(gate->bit_idx); reg |= BIT(gate->bit_idx);
else } else {
reg &= ~BIT(gate->bit_idx); reg = readl(gate->reg);
if (set)
reg |= BIT(gate->bit_idx);
else
reg &= ~BIT(gate->bit_idx);
}
writel(reg, gate->reg); writel(reg, gate->reg);
...@@ -121,6 +127,13 @@ struct clk *clk_register_gate(struct device *dev, const char *name, ...@@ -121,6 +127,13 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
struct clk *clk; struct clk *clk;
struct clk_init_data init; struct clk_init_data init;
if (clk_gate_flags & CLK_GATE_HIWORD_MASK) {
if (bit_idx > 16) {
pr_err("gate bit exceeds LOWORD field\n");
return ERR_PTR(-EINVAL);
}
}
/* allocate the gate */ /* allocate the gate */
gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
if (!gate) { if (!gate) {
......
...@@ -210,6 +210,10 @@ void of_fixed_clk_setup(struct device_node *np); ...@@ -210,6 +210,10 @@ void of_fixed_clk_setup(struct device_node *np);
* CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
* enable the clock. Setting this flag does the opposite: setting the bit * enable the clock. Setting this flag does the opposite: setting the bit
* disable the clock and clearing it enables the clock * disable the clock and clearing it enables the clock
* CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit
* of this register, and mask of gate bits are in higher 16-bit of this
* register. While setting the gate bits, higher 16-bit should also be
* updated to indicate changing gate bits.
*/ */
struct clk_gate { struct clk_gate {
struct clk_hw hw; struct clk_hw hw;
...@@ -220,6 +224,7 @@ struct clk_gate { ...@@ -220,6 +224,7 @@ struct clk_gate {
}; };
#define CLK_GATE_SET_TO_DISABLE BIT(0) #define CLK_GATE_SET_TO_DISABLE BIT(0)
#define CLK_GATE_HIWORD_MASK BIT(1)
extern const struct clk_ops clk_gate_ops; extern const struct clk_ops clk_gate_ops;
struct clk *clk_register_gate(struct device *dev, const char *name, struct clk *clk_register_gate(struct device *dev, const char *name,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册