提交 03d3ac21 编写于 作者: T Takashi Iwai

ALSA: oxygen: Use standard printk helpers

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 a3fe03f4
......@@ -147,7 +147,7 @@ void oxygen_write_ac97(struct oxygen *chip, unsigned int codec,
return;
}
}
snd_printk(KERN_ERR "AC'97 write timeout\n");
dev_err(chip->card->dev, "AC'97 write timeout\n");
}
EXPORT_SYMBOL(oxygen_write_ac97);
......@@ -179,7 +179,7 @@ u16 oxygen_read_ac97(struct oxygen *chip, unsigned int codec,
reg ^= 0xffff;
}
}
snd_printk(KERN_ERR "AC'97 read timeout on codec %u\n", codec);
dev_err(chip->card->dev, "AC'97 read timeout on codec %u\n", codec);
return 0;
}
EXPORT_SYMBOL(oxygen_read_ac97);
......@@ -208,7 +208,7 @@ static int oxygen_wait_spi(struct oxygen *chip)
OXYGEN_SPI_BUSY) == 0)
return 0;
}
snd_printk(KERN_ERR "oxygen: SPI wait timeout\n");
dev_err(chip->card->dev, "oxygen: SPI wait timeout\n");
return -EIO;
}
......@@ -288,5 +288,5 @@ void oxygen_write_eeprom(struct oxygen *chip, unsigned int index, u16 value)
& OXYGEN_EEPROM_BUSY))
return;
}
snd_printk(KERN_ERR "EEPROM write timeout\n");
dev_err(chip->card->dev, "EEPROM write timeout\n");
}
......@@ -313,7 +313,7 @@ static void oxygen_restore_eeprom(struct oxygen *chip,
oxygen_clear_bits8(chip, OXYGEN_MISC,
OXYGEN_MISC_WRITE_PCI_SUBID);
snd_printk(KERN_INFO "EEPROM ID restored\n");
dev_info(chip->card->dev, "EEPROM ID restored\n");
}
}
......@@ -617,13 +617,13 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id,
err = pci_request_regions(pci, DRIVER);
if (err < 0) {
snd_printk(KERN_ERR "cannot reserve PCI resources\n");
dev_err(card->dev, "cannot reserve PCI resources\n");
goto err_pci_enable;
}
if (!(pci_resource_flags(pci, 0) & IORESOURCE_IO) ||
pci_resource_len(pci, 0) < OXYGEN_IO_SIZE) {
snd_printk(KERN_ERR "invalid PCI I/O range\n");
dev_err(card->dev, "invalid PCI I/O range\n");
err = -ENXIO;
goto err_pci_regions;
}
......@@ -658,7 +658,7 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id,
err = request_irq(pci->irq, oxygen_interrupt, IRQF_SHARED,
KBUILD_MODNAME, chip);
if (err < 0) {
snd_printk(KERN_ERR "cannot grab interrupt %d\n", pci->irq);
dev_err(card->dev, "cannot grab interrupt %d\n", pci->irq);
goto err_card;
}
chip->irq = pci->irq;
......@@ -796,7 +796,7 @@ static int oxygen_pci_resume(struct device *dev)
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
snd_printk(KERN_ERR "cannot reenable device");
dev_err(dev, "cannot reenable device");
snd_card_disconnect(card);
return -EIO;
}
......
......@@ -120,7 +120,7 @@ void xonar_hdmi_uart_input(struct oxygen *chip)
if (chip->uart_input_count >= 2 &&
chip->uart_input[chip->uart_input_count - 2] == 'O' &&
chip->uart_input[chip->uart_input_count - 1] == 'K') {
printk(KERN_DEBUG "message from HDMI chip received:\n");
dev_dbg(chip->card->dev, "message from HDMI chip received:\n");
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
chip->uart_input, chip->uart_input_count);
chip->uart_input_count = 0;
......
......@@ -56,9 +56,9 @@ static void xonar_ext_power_gpio_changed(struct oxygen *chip)
if (has_power != data->has_power) {
data->has_power = has_power;
if (has_power) {
snd_printk(KERN_NOTICE "power restored\n");
dev_notice(chip->card->dev, "power restored\n");
} else {
snd_printk(KERN_CRIT
dev_crit(chip->card->dev,
"Hey! Don't unplug the power cable!\n");
/* TODO: stop PCMs */
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册