提交 01b8e7db 编写于 作者: A Arend van Spriel 提交者: John W. Linville

brcmfmac: wait for firmware event when creating P2P_DEVICE interface

The firmware sends a IF event to notify the host driver that the
P2P_DEVICE interface has been created. Wait for the event before
returning the related wireless_dev.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NPiotr Haber <phaber@broadcom.com>
Reviewed-by: NHante Meuleman <meuleman@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 27f10e38
......@@ -755,15 +755,23 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
}
}
/* Allocate netdev, including space for private structure */
ndev = alloc_netdev(sizeof(struct brcmf_if), name, ether_setup);
if (!ndev) {
brcmf_err("OOM - alloc_netdev\n");
return ERR_PTR(-ENOMEM);
if (!brcmf_p2p_enable && bssidx == 1) {
/* this is P2P_DEVICE interface */
brcmf_dbg(INFO, "allocate non-netdev interface\n");
ifp = kzalloc(sizeof(*ifp), GFP_KERNEL);
} else {
brcmf_dbg(INFO, "allocate netdev interface\n");
/* Allocate netdev, including space for private structure */
ndev = alloc_netdev(sizeof(*ifp), name, ether_setup);
if (!ndev) {
brcmf_err("OOM - alloc_netdev\n");
return ERR_PTR(-ENOMEM);
}
ifp = netdev_priv(ndev);
ifp->ndev = ndev;
}
ifp = netdev_priv(ndev);
ifp->ndev = ndev;
ifp->drvr = drvr;
drvr->iflist[bssidx] = ifp;
ifp->ifidx = ifidx;
......@@ -775,7 +783,7 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
memcpy(ifp->mac_addr, mac_addr, ETH_ALEN);
brcmf_dbg(TRACE, " ==== pid:%x, if:%s (%pM) created ===\n",
current->pid, ifp->ndev->name, ifp->mac_addr);
current->pid, name, ifp->mac_addr);
return ifp;
}
......@@ -807,11 +815,13 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx)
}
unregister_netdev(ifp->ndev);
drvr->iflist[bssidx] = NULL;
if (bssidx == 0)
brcmf_cfg80211_detach(drvr->config);
free_netdev(ifp->ndev);
} else {
kfree(ifp);
}
drvr->iflist[bssidx] = NULL;
}
int brcmf_attach(uint bus_hdrlen, struct device *dev)
......
......@@ -1786,7 +1786,7 @@ void brcmf_fws_add_interface(struct brcmf_if *ifp)
brcmf_dbg(TRACE, "enter: idx=%d, mac=%pM\n",
ifp->bssidx, ifp->mac_addr);
if (!ifp->drvr->fw_signals)
if (!ifp->ndev || !ifp->drvr->fw_signals)
return;
entry = &fws->desc.iface[ifp->ifidx];
......
......@@ -485,7 +485,6 @@ static int brcmf_p2p_set_firmware(struct brcmf_if *ifp, u8 *p2p_mac)
static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)
{
struct brcmf_if *pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
struct brcmf_if *p2p_ifp = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp;
bool local_admin = false;
if (!dev_addr || is_zero_ether_addr(dev_addr)) {
......@@ -499,7 +498,6 @@ static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)
memcpy(p2p->dev_addr, dev_addr, ETH_ALEN);
if (local_admin)
p2p->dev_addr[0] |= 0x02;
memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
/* Generate the P2P Interface Address. If the discovery and connection
* BSSCFGs need to simultaneously co-exist, then this address must be
......@@ -1948,6 +1946,7 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg)
p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
brcmf_p2p_generate_bss_mac(p2p, NULL);
memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
/* Initialize P2P Discovery in the firmware */
......@@ -2163,38 +2162,44 @@ static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p,
return (struct wireless_dev *)p2p_vif;
}
/* create ifp here */
p2p_ifp = kzalloc(sizeof(*p2p_ifp), GFP_KERNEL);
if (!p2p_ifp)
return ERR_PTR(-ENOMEM);
p2p_vif->ifp = p2p_ifp;
p2p_ifp->vif = p2p_vif;
p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
brcmf_p2p_generate_bss_mac(p2p, addr);
memcpy(&p2p_vif->wdev.address, p2p->dev_addr, sizeof(p2p->dev_addr));
pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
brcmf_p2p_generate_bss_mac(p2p, addr);
brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
brcmf_cfg80211_arm_vif_event(p2p->cfg, p2p_vif);
/* Initialize P2P Discovery in the firmware */
err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
if (err < 0) {
brcmf_err("set p2p_disc error\n");
brcmf_free_vif(p2p_vif);
return ERR_PTR(err);
brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
goto fail;
}
/* obtain bsscfg index for P2P discovery */
/* wait for firmware event */
err = brcmf_cfg80211_wait_vif_event_timeout(p2p->cfg, BRCMF_E_IF_ADD,
msecs_to_jiffies(1500));
brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
if (!err) {
brcmf_err("timeout occurred\n");
err = -EIO;
goto fail;
}
/* discovery interface created */
p2p_ifp = p2p_vif->ifp;
p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
memcpy(&p2p_vif->wdev.address, p2p->dev_addr, sizeof(p2p->dev_addr));
/* verify bsscfg index for P2P discovery */
err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx);
if (err < 0) {
brcmf_err("retrieving discover bsscfg index failed\n");
brcmf_free_vif(p2p_vif);
return ERR_PTR(err);
goto fail;
}
p2p_ifp->drvr = p2p->cfg->pub;
p2p_ifp->bssidx = bssidx;
WARN_ON(p2p_ifp->bssidx != bssidx);
init_completion(&p2p->send_af_done);
INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler);
......@@ -2202,6 +2207,10 @@ static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p,
init_completion(&p2p->wait_next_af);
return &p2p_vif->wdev;
fail:
brcmf_free_vif(p2p_vif);
return ERR_PTR(err);
}
/**
......@@ -2215,7 +2224,6 @@ static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_vif *vif)
cfg80211_unregister_wdev(&vif->wdev);
p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
kfree(vif->ifp);
brcmf_free_vif(vif);
}
......
......@@ -4568,9 +4568,11 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp,
ifp->vif = vif;
vif->ifp = ifp;
vif->wdev.netdev = ifp->ndev;
ifp->ndev->ieee80211_ptr = &vif->wdev;
SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy));
if (ifp->ndev) {
vif->wdev.netdev = ifp->ndev;
ifp->ndev->ieee80211_ptr = &vif->wdev;
SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy));
}
mutex_unlock(&event->vif_event_lock);
wake_up(&event->vif_wq);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册