drm/i915: check fdi B/C lane sharing constraint

And properly toggle the chicken bit in the pch to enable/disable fdi C
rx. If we don't set this bit correctly, the rx gets confused in link
training, which can result in an fdi link that silently fails to train
the link (since the corresponding register reports success). Note that
both fdi link B and C can suffer when this bit is not set correctly.

The code as-is has a few deficiencies:
- We presume all pipes use the pch which is not the case for cpu edp.
- We don't bother with disabling both pipes when we could make things
  work, e.g. when pipe B switched from 4 to 2 lanes due to a mode
  change, we don't bother updating the w/a bit.
- It's ugly.

All of these are because we compute ->fdi_lanes way too late, when
we're already setting up individual pipes. We need to have this
information in ->modeset_global_resources already, to set things up
correctly. But that is a much larger reorg of the code.

Note that we actually hit the 2 lanes limit in practice rather
quickly: Even though the 1920x1200 mode native mode of my screen fits
into 2 lanes, it needs 3 lanes for the 1920x1080 (since that somehow
has much more blanking ...). Not obeying this restriction seems to
results in cute-looking digital noise.

v2: Only ever clear the chicken bit when both pipes are off.

v3: Use the new ->modeset_global_resources callback.

v4: Move the WARNs to the right place. Oh how I hate hacks.

v5: Fix spelling, noticed by Paulo Zanoni.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -3811,8 +3811,9 @@
 #define SOUTH_CHICKEN1		0xc2000
 #define  FDIA_PHASE_SYNC_SHIFT_OVR	19
 #define  FDIA_PHASE_SYNC_SHIFT_EN	18
-#define FDI_PHASE_SYNC_OVR(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_OVR - ((pipe) * 2)))
-#define FDI_PHASE_SYNC_EN(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_EN - ((pipe) * 2)))
+#define  FDI_PHASE_SYNC_OVR(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_OVR - ((pipe) * 2)))
+#define  FDI_PHASE_SYNC_EN(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_EN - ((pipe) * 2)))
+#define  FDI_BC_BIFURCATION_SELECT	(1 << 12)
 #define SOUTH_CHICKEN2		0xc2004
 #define  DPLS_EDP_PPS_FIX_DIS	(1<<0)
 

drivers/gpu/drm/i915/intel_display.c

@@ -2343,6 +2343,29 @@ static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
 	POSTING_READ(SOUTH_CHICKEN1);
 }
 
+static void ivb_modeset_global_resources(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *pipe_B_crtc =
+		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
+	struct intel_crtc *pipe_C_crtc =
+		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
+	uint32_t temp;
+
+	/* When everything is off disable fdi C so that we could enable fdi B
+	 * with all lanes. XXX: This misses the case where a pipe is not using
+	 * any pch resources and so doesn't need any fdi lanes. */
+	if (!pipe_B_crtc->base.enabled && !pipe_C_crtc->base.enabled) {
+		WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
+		WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
+
+		temp = I915_READ(SOUTH_CHICKEN1);
+		temp &= ~FDI_BC_BIFURCATION_SELECT;
+		DRM_DEBUG_KMS("disabling fdi C rx\n");
+		I915_WRITE(SOUTH_CHICKEN1, temp);
+	}
+}
+
 /* The FDI link training functions for ILK/Ibexpeak. */
 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 {
@@ -2602,6 +2625,9 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
 	POSTING_READ(reg);
 	udelay(150);
 
+	DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
+		      I915_READ(FDI_RX_IIR(pipe)));
+
 	/* enable CPU FDI TX and PCH FDI RX */
 	reg = FDI_TX_CTL(pipe);
 	temp = I915_READ(reg);
@@ -2648,7 +2674,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
 		if (temp & FDI_RX_BIT_LOCK ||
 		    (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
 			I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
-			DRM_DEBUG_KMS("FDI train 1 done.\n");
+			DRM_DEBUG_KMS("FDI train 1 done, level %i.\n", i);
 			break;
 		}
 	}
@@ -2689,7 +2715,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
 
 		if (temp & FDI_RX_SYMBOL_LOCK) {
 			I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
-			DRM_DEBUG_KMS("FDI train 2 done.\n");
+			DRM_DEBUG_KMS("FDI train 2 done, level %i.\n", i);
 			break;
 		}
 	}
@@ -5013,6 +5039,88 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
 	return true;
 }
 
+static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t temp;
+
+	temp = I915_READ(SOUTH_CHICKEN1);
+	if (temp & FDI_BC_BIFURCATION_SELECT)
+		return;
+
+	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
+	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
+
+	temp |= FDI_BC_BIFURCATION_SELECT;
+	DRM_DEBUG_KMS("enabling fdi C rx\n");
+	I915_WRITE(SOUTH_CHICKEN1, temp);
+	POSTING_READ(SOUTH_CHICKEN1);
+}
+
+static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *pipe_B_crtc =
+		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
+
+	DRM_DEBUG_KMS("checking fdi config on pipe %i, lanes %i\n",
+		      intel_crtc->pipe, intel_crtc->fdi_lanes);
+	if (intel_crtc->fdi_lanes > 4) {
+		DRM_DEBUG_KMS("invalid fdi lane config on pipe %i: %i lanes\n",
+			      intel_crtc->pipe, intel_crtc->fdi_lanes);
+		/* Clamp lanes to avoid programming the hw with bogus values. */
+		intel_crtc->fdi_lanes = 4;
+
+		return false;
+	}
+
+	if (dev_priv->num_pipe == 2)
+		return true;
+
+	switch (intel_crtc->pipe) {
+	case PIPE_A:
+		return true;
+	case PIPE_B:
+		if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
+		    intel_crtc->fdi_lanes > 2) {
+			DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
+				      intel_crtc->pipe, intel_crtc->fdi_lanes);
+			/* Clamp lanes to avoid programming the hw with bogus values. */
+			intel_crtc->fdi_lanes = 2;
+
+			return false;
+		}
+
+		if (intel_crtc->fdi_lanes > 2)
+			WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
+		else
+			cpt_enable_fdi_bc_bifurcation(dev);
+
+		return true;
+	case PIPE_C:
+		if (!pipe_B_crtc->base.enabled || pipe_B_crtc->fdi_lanes <= 2) {
+			if (intel_crtc->fdi_lanes > 2) {
+				DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
+					      intel_crtc->pipe, intel_crtc->fdi_lanes);
+				/* Clamp lanes to avoid programming the hw with bogus values. */
+				intel_crtc->fdi_lanes = 2;
+
+				return false;
+			}
+		} else {
+			DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
+			return false;
+		}
+
+		cpt_enable_fdi_bc_bifurcation(dev);
+
+		return true;
+	default:
+		BUG();
+	}
+}
+
 static void ironlake_set_m_n(struct drm_crtc *crtc,
 			     struct drm_display_mode *mode,
 			     struct drm_display_mode *adjusted_mode)
@@ -5211,7 +5319,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	struct intel_encoder *encoder;
 	u32 temp;
 	int ret;
-	bool dither;
+	bool dither, fdi_config_ok;
 
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		switch (encoder->type) {
@@ -5349,8 +5457,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
+	/* Note, this also computes intel_crtc->fdi_lanes which is used below in
+	 * ironlake_check_fdi_lanes. */
 	ironlake_set_m_n(crtc, mode, adjusted_mode);
 
+	fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
+
 	if (is_cpu_edp)
 		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
 
@@ -5368,7 +5480,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
 	intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
 
-	return ret;
+	return fdi_config_ok ? ret : -EINVAL;
 }
 
 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
@@ -8331,6 +8443,8 @@ static void intel_init_display(struct drm_device *dev)
 			/* FIXME: detect B0+ stepping and use auto training */
 			dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 			dev_priv->display.write_eld = ironlake_write_eld;
+			dev_priv->display.modeset_global_resources =
+				ivb_modeset_global_resources;
 		} else if (IS_HASWELL(dev)) {
 			dev_priv->display.fdi_link_train = hsw_fdi_link_train;
 			dev_priv->display.write_eld = haswell_write_eld;