提交 0029da3b 编写于 作者: A Artem Bityutskiy 提交者: Frank Haverkamp

JFFS2: add UBI support

This patch make JFFS2 able to work with UBI volumes via the emulated MTD
devices which are directly mapped to these volumes.
Signed-off-by: NArtem Bityutskiy <dedekind@infradead.org>
上级 801c135c
......@@ -672,6 +672,13 @@ static int jffs2_flash_setup(struct jffs2_sb_info *c) {
return ret;
}
/* and an UBI volume */
if (jffs2_ubivol(c)) {
ret = jffs2_ubivol_setup(c);
if (ret)
return ret;
}
return ret;
}
......@@ -690,4 +697,9 @@ void jffs2_flash_cleanup(struct jffs2_sb_info *c) {
if (jffs2_nor_wbuf_flash(c)) {
jffs2_nor_wbuf_flash_cleanup(c);
}
/* and an UBI volume */
if (jffs2_ubivol(c)) {
jffs2_ubivol_cleanup(c);
}
}
......@@ -98,6 +98,9 @@ static inline void jffs2_init_inode_info(struct jffs2_inode_info *f)
#define jffs2_nor_wbuf_flash(c) (0)
#define jffs2_nor_wbuf_flash_setup(c) (0)
#define jffs2_nor_wbuf_flash_cleanup(c) do {} while (0)
#define jffs2_ubivol(c) (0)
#define jffs2_ubivol_setup(c) (0)
#define jffs2_ubivol_cleanup(c) do {} while (0)
#else /* NAND and/or ECC'd NOR support present */
......@@ -133,6 +136,9 @@ void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c);
#define jffs2_dataflash(c) (c->mtd->type == MTD_DATAFLASH)
int jffs2_dataflash_setup(struct jffs2_sb_info *c);
void jffs2_dataflash_cleanup(struct jffs2_sb_info *c);
#define jffs2_ubivol(c) (c->mtd->type == MTD_UBIVOLUME)
int jffs2_ubivol_setup(struct jffs2_sb_info *c);
void jffs2_ubivol_cleanup(struct jffs2_sb_info *c);
#define jffs2_nor_wbuf_flash(c) (c->mtd->type == MTD_NORFLASH && ! (c->mtd->flags & MTD_BIT_WRITEABLE))
int jffs2_nor_wbuf_flash_setup(struct jffs2_sb_info *c);
......
......@@ -1208,3 +1208,27 @@ int jffs2_nor_wbuf_flash_setup(struct jffs2_sb_info *c) {
void jffs2_nor_wbuf_flash_cleanup(struct jffs2_sb_info *c) {
kfree(c->wbuf);
}
int jffs2_ubivol_setup(struct jffs2_sb_info *c) {
c->cleanmarker_size = 0;
if (c->mtd->writesize == 1)
/* We do not need write-buffer */
return 0;
init_rwsem(&c->wbuf_sem);
c->wbuf_pagesize = c->mtd->writesize;
c->wbuf_ofs = 0xFFFFFFFF;
c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
if (!c->wbuf)
return -ENOMEM;
printk(KERN_INFO "JFFS2 write-buffering enabled buffer (%d) erasesize (%d)\n", c->wbuf_pagesize, c->sector_size);
return 0;
}
void jffs2_ubivol_cleanup(struct jffs2_sb_info *c) {
kfree(c->wbuf);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册