• D
    clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization" · 4715f81a
    Douglas Anderson 提交于
    This reverts commit 7a03fe6f ("clk: rockchip: reset init state
    before mmc card initialization").
    
    Though not totally obvious from the commit message nor from the source
    code, that commit appears to be trying to reset the "_drv" MMC clocks to
    90 degrees (note that the "_sample" MMC clocks have a shift of 0 so are
    not touched).
    
    The major problem here is that it doesn't properly reset things.  The
    phase is a two bit field and the commit only touches one of the two
    bits.  Thus the commit had the following affect:
    - phase   0  => phase  90
    - phase  90  => phase  90
    - phase 180  => phase 270
    - phase 270  => phase 270
    
    Things get even weirder if you happen to have a bootloader that was
    actually using delay elements (should be no reason to, but you never
    know), since those are additional bits that weren't touched by the
    original patch.
    
    This is unlikely to be what we actually want.  Checking on rk3288-veyron
    devices, I can see that the bootloader leaves these clocks as:
    - emmc:  phase 180
    - sdmmc: phase 90
    - sdio0: phase 90
    
    Thus on rk3288-veyron devices the commit we're reverting had the effect
    of changing the eMMC clock to phase 270.  This probably explains the
    scattered reports I've heard of eMMC devices not working on some veyron
    devices when using the upstream kernel.
    
    The original commit was presumably made because previously the kernel
    didn't touch the "_drv" phase at all and relied on whatever value was
    there when the kernel started.  If someone was using a bootloader that
    touched the "_drv" phase then, indeed, we should have code in the kernel
    to fix that.  ...and also, to get ideal timings, we should also have the
    kernel change the phase depending on the speed mode.  In fact, that's
    the subject of a recent patch I posted at
    <https://patchwork.kernel.org/patch/9075141/>.
    
    Ideally, we should take both the patch posted to dw_mmc and this
    revert.  Since those will likely go through different trees, here I
    describe behavior with the combos:
    
    1. Just this revert: likely will fix rk3288-veyron eMMC on some devices
       + other cases; might break someone with a strange bootloader that
       sets the phase to 0 or one that uses delay elements (pretty
       unpredicable what would happen in that case).
    2. Just dw_mmc patch: fixes everyone.  Effectly the dw_mmc patch will
       totally override the broken patch and fix everything.
    3. Both patches: fixes everyone.  Once dw_mmc is initting properly then
       any defaults from the clock code doesn't mattery.
    
    Fixes: 7a03fe6f ("clk: rockchip: reset init state before mmc card initialization")
    Signed-off-by: NDouglas Anderson <dianders@chromium.org>
    Reviewed-by: NShawn Lin <shawn.lin@rock-chips.com>
    
    [emmc and sdmmc still work on all current boards in mainline after this
    revert, so they should take precedence over any out-of-tree board that
    will hopefully again get fixed with the better upcoming dw_mmc change.]
    Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
    4715f81a
clk-mmc-phase.c 4.6 KB