phase.c 3.6 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138
/*
 *   ALSA driver for ICEnsemble ICE1724 (Envy24)
 *
 *   Lowlevel functions for Terratec PHASE 22
 *
 *	Copyright (c) 2005 Misha Zhilin <misha@epiphan.com>
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 *   You should have received a copy of the GNU General Public License
 *   along with this program; if not, write to the Free Software
 *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 *
 */

/* PHASE 22 overview:
 *   Audio controller: VIA Envy24HT-S (slightly trimmed down version of Envy24HT)
 *   Analog chip: AK4524 (partially via Philip's 74HCT125)
 *   Digital receiver: CS8414-CS (not supported in this release)
 *
 *   Envy connects to AK4524
 *	- CS directly from GPIO 10
 *	- CCLK via 74HCT125's gate #4 from GPIO 4
 *	- CDTI via 74HCT125's gate #2 from GPIO 5
 *		CDTI may be completely blocked by 74HCT125's gate #1 controlled by GPIO 3
 */

#include <sound/driver.h>
#include <asm/io.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <sound/core.h>

#include "ice1712.h"
#include "envy24ht.h"
#include "phase.h"

static akm4xxx_t akm_phase22 __devinitdata = {
	.type = SND_AK4524,
	.num_dacs = 2,
	.num_adcs = 2,
};

static struct snd_ak4xxx_private akm_phase22_priv __devinitdata = {
	.caddr =	2,
	.cif =		1,
	.data_mask =	1 << 4,
	.clk_mask =	1 << 5,
	.cs_mask =	1 << 10,
	.cs_addr =	1 << 10,
	.cs_none =	0,
	.add_flags = 	1 << 3,
	.mask_flags =	0,
};

static int __devinit phase22_init(ice1712_t *ice)
{
	akm4xxx_t *ak;
	int err;

	// Configure DAC/ADC description for generic part of ice1724
	switch (ice->eeprom.subvendor) {
	case VT1724_SUBDEVICE_PHASE22:
		ice->num_total_dacs = 2;
		ice->num_total_adcs = 2;
		ice->vt1720 = 1; // Envy24HT-S have 16 bit wide GPIO
		break;
	default:
		snd_BUG();
		return -EINVAL;
	}

	// Initialize analog chips
	ak = ice->akm = kcalloc(1, sizeof(akm4xxx_t), GFP_KERNEL);
	if (! ak)
		return -ENOMEM;
	ice->akm_codecs = 1;
	switch (ice->eeprom.subvendor) {
	case VT1724_SUBDEVICE_PHASE22:
		if ((err = snd_ice1712_akm4xxx_init(ak, &akm_phase22, &akm_phase22_priv, ice)) < 0)
			return err;
		break;
	}

	return 0;
}

static int __devinit phase22_add_controls(ice1712_t *ice)
{
	int err = 0;

	switch (ice->eeprom.subvendor) {
	case VT1724_SUBDEVICE_PHASE22:
		err = snd_ice1712_akm4xxx_build_controls(ice);
		if (err < 0)
			return err;
	}
	return 0;
}

static unsigned char phase22_eeprom[] __devinitdata = {
	0x00,	/* SYSCONF: 1xADC, 1xDACs */
	0x80,	/* ACLINK: I2S */
	0xf8,	/* I2S: vol, 96k, 24bit*/
	0xc3,	/* SPDIF: out-en, out-int, spdif-in */
	0xFF,	/* GPIO_DIR */
	0xFF,	/* GPIO_DIR1 */
	0xFF,	/* GPIO_DIR2 */
	0x00,	/* GPIO_MASK */
	0x00,	/* GPIO_MASK1 */
	0x00,	/* GPIO_MASK2 */
	0x00,	/* GPIO_STATE: */
	0x00,	/* GPIO_STATE1: */
	0x00,	/* GPIO_STATE2 */
};

struct snd_ice1712_card_info snd_vt1724_phase_cards[] __devinitdata = {
	{
		.subvendor = VT1724_SUBDEVICE_PHASE22,
		.name = "Terratec PHASE 22",
		.model = "phase22",
		.chip_init = phase22_init,
		.build_controls = phase22_add_controls,
		.eeprom_size = sizeof(phase22_eeprom),
		.eeprom_data = phase22_eeprom,
	},
	{ } /* terminator */
};