rt2x00usb.c 18.3 KB
Newer Older
1
/*
2
	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
	<http://rt2x00.serialmonkey.com>

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the
	Free Software Foundation, Inc.,
	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 */

/*
	Module: rt2x00usb
	Abstract: rt2x00 generic usb device routines.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb.h>
29
#include <linux/bug.h>
30 31 32 33 34 35 36

#include "rt2x00.h"
#include "rt2x00usb.h"

/*
 * Interfacing with the HW.
 */
A
Adam Baker 已提交
37
int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
38 39 40
			     const u8 request, const u8 requesttype,
			     const u16 offset, const u16 value,
			     void *buffer, const u16 buffer_length,
41
			     const int timeout)
42
{
43
	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
44 45 46 47 48 49
	int status;
	unsigned int i;
	unsigned int pipe =
	    (requesttype == USB_VENDOR_REQUEST_IN) ?
	    usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);

50 51
	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
		return -ENODEV;
52

53 54 55 56 57 58 59 60
	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
		status = usb_control_msg(usb_dev, pipe, request, requesttype,
					 value, offset, buffer, buffer_length,
					 timeout);
		if (status >= 0)
			return 0;

		/*
61
		 * Check for errors
62
		 * -ENODEV: Device has disappeared, no point continuing.
63
		 * All other errors: Try again.
64
		 */
65 66
		else if (status == -ENODEV) {
			clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
67
			break;
68
		}
69 70 71 72 73 74 75 76 77 78
	}

	ERROR(rt2x00dev,
	      "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n",
	      request, offset, status);

	return status;
}
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request);

79 80 81 82
int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
				   const u8 request, const u8 requesttype,
				   const u16 offset, void *buffer,
				   const u16 buffer_length, const int timeout)
83 84 85
{
	int status;

86
	BUG_ON(!mutex_is_locked(&rt2x00dev->csr_mutex));
87

88 89 90
	/*
	 * Check for Cache availability.
	 */
91
	if (unlikely(!rt2x00dev->csr.cache || buffer_length > CSR_CACHE_SIZE)) {
92 93 94 95 96
		ERROR(rt2x00dev, "CSR cache not available.\n");
		return -ENOMEM;
	}

	if (requesttype == USB_VENDOR_REQUEST_OUT)
97
		memcpy(rt2x00dev->csr.cache, buffer, buffer_length);
98 99

	status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype,
100
					  offset, 0, rt2x00dev->csr.cache,
101 102 103
					  buffer_length, timeout);

	if (!status && requesttype == USB_VENDOR_REQUEST_IN)
104
		memcpy(buffer, rt2x00dev->csr.cache, buffer_length);
105 106 107

	return status;
}
108 109 110 111 112 113 114 115 116
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_req_buff_lock);

int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
				  const u8 request, const u8 requesttype,
				  const u16 offset, void *buffer,
				  const u16 buffer_length, const int timeout)
{
	int status;

117
	mutex_lock(&rt2x00dev->csr_mutex);
118 119 120 121 122

	status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
						requesttype, offset, buffer,
						buffer_length, timeout);

123
	mutex_unlock(&rt2x00dev->csr_mutex);
124 125 126

	return status;
}
127 128
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);

129 130
int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
					const u8 request, const u8 requesttype,
I
Ivo van Doorn 已提交
131
					const u16 offset, const void *buffer,
132 133 134 135 136 137 138
					const u16 buffer_length,
					const int timeout)
{
	int status = 0;
	unsigned char *tb;
	u16 off, len, bsize;

139
	mutex_lock(&rt2x00dev->csr_mutex);
140

I
Ivo van Doorn 已提交
141
	tb  = (char *)buffer;
142 143 144 145 146 147 148 149 150 151 152 153 154
	off = offset;
	len = buffer_length;
	while (len && !status) {
		bsize = min_t(u16, CSR_CACHE_SIZE, len);
		status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
							requesttype, off, tb,
							bsize, timeout);

		tb  += bsize;
		len -= bsize;
		off += bsize;
	}

155
	mutex_unlock(&rt2x00dev->csr_mutex);
156 157 158 159 160

	return status;
}
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);

161 162
int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
			   const unsigned int offset,
163
			   const struct rt2x00_field32 field,
164 165 166 167
			   u32 *reg)
{
	unsigned int i;

168 169 170
	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
		return -ENODEV;

171 172 173 174 175 176 177 178 179 180 181 182 183 184 185
	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
		rt2x00usb_register_read_lock(rt2x00dev, offset, reg);
		if (!rt2x00_get_field32(*reg, field))
			return 1;
		udelay(REGISTER_BUSY_DELAY);
	}

	ERROR(rt2x00dev, "Indirect register access failed: "
	      "offset=0x%.08x, value=0x%.08x\n", offset, *reg);
	*reg = ~0;

	return 0;
}
EXPORT_SYMBOL_GPL(rt2x00usb_regbusy_read);

186 187 188 189 190
/*
 * TX data handlers.
 */
static void rt2x00usb_interrupt_txdone(struct urb *urb)
{
I
Ivo van Doorn 已提交
191 192 193
	struct queue_entry *entry = (struct queue_entry *)urb->context;
	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
	struct txdone_entry_desc txdesc;
194

195
	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
I
Ivo van Doorn 已提交
196
	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
197 198 199 200
		return;

	/*
	 * Obtain the status about this packet.
I
Ivo van Doorn 已提交
201 202 203 204 205 206
	 * Note that when the status is 0 it does not mean the
	 * frame was send out correctly. It only means the frame
	 * was succesfully pushed to the hardware, we have no
	 * way to determine the transmission status right now.
	 * (Only indirectly by looking at the failed TX counters
	 * in the register).
207
	 */
208
	txdesc.flags = 0;
I
Ivo van Doorn 已提交
209 210 211 212
	if (!urb->status)
		__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
	else
		__set_bit(TXDONE_FAILURE, &txdesc.flags);
I
Ivo van Doorn 已提交
213
	txdesc.retry = 0;
214

I
Ivo van Doorn 已提交
215
	rt2x00lib_txdone(entry, &txdesc);
216 217
}

218
int rt2x00usb_write_tx_data(struct queue_entry *entry)
219
{
220
	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
221
	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
222
	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
I
Ivo van Doorn 已提交
223
	struct skb_frame_desc *skbdesc;
224
	u32 length;
225 226 227 228

	/*
	 * Add the descriptor in front of the skb.
	 */
229 230
	skb_push(entry->skb, entry->queue->desc_size);
	memset(entry->skb->data, 0, entry->queue->desc_size);
231

I
Ivo van Doorn 已提交
232 233 234
	/*
	 * Fill in skb descriptor
	 */
235 236 237
	skbdesc = get_skb_frame_desc(entry->skb);
	skbdesc->desc = entry->skb->data;
	skbdesc->desc_len = entry->queue->desc_size;
I
Ivo van Doorn 已提交
238

239
	/*
240 241 242
	 * USB devices cannot blindly pass the skb->len as the
	 * length of the data to usb_fill_bulk_urb. Pass the skb
	 * to the driver to determine what the length should be.
243
	 */
244
	length = rt2x00dev->ops->lib->get_tx_data_len(entry);
245

246
	usb_fill_bulk_urb(entry_priv->urb, usb_dev,
247
			  usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint),
248 249
			  entry->skb->data, length,
			  rt2x00usb_interrupt_txdone, entry);
250

251 252 253 254 255 256
	/*
	 * Make sure the skb->data pointer points to the frame, not the
	 * descriptor.
	 */
	skb_pull(entry->skb, entry->queue->desc_size);

257 258 259 260
	return 0;
}
EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);

261 262 263 264
static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
{
	struct queue_entry_priv_usb *entry_priv = entry->priv_data;

265
	if (test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags))
266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305
		usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
}

void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
			     const enum data_queue_qid qid)
{
	struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid);
	unsigned long irqflags;
	unsigned int index;
	unsigned int index_done;
	unsigned int i;

	/*
	 * Only protect the range we are going to loop over,
	 * if during our loop a extra entry is set to pending
	 * it should not be kicked during this run, since it
	 * is part of another TX operation.
	 */
	spin_lock_irqsave(&queue->lock, irqflags);
	index = queue->index[Q_INDEX];
	index_done = queue->index[Q_INDEX_DONE];
	spin_unlock_irqrestore(&queue->lock, irqflags);

	/*
	 * Start from the TX done pointer, this guarentees that we will
	 * send out all frames in the correct order.
	 */
	if (index_done < index) {
		for (i = index_done; i < index; i++)
			rt2x00usb_kick_tx_entry(&queue->entries[i]);
	} else {
		for (i = index_done; i < queue->limit; i++)
			rt2x00usb_kick_tx_entry(&queue->entries[i]);

		for (i = 0; i < index; i++)
			rt2x00usb_kick_tx_entry(&queue->entries[i]);
	}
}
EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue);

306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340
void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
			     const enum data_queue_qid qid)
{
	struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid);
	struct queue_entry_priv_usb *entry_priv;
	struct queue_entry_priv_usb_bcn *bcn_priv;
	unsigned int i;
	bool kill_guard;

	/*
	 * When killing the beacon queue, we must also kill
	 * the beacon guard byte.
	 */
	kill_guard =
	    (qid == QID_BEACON) &&
	    (test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags));

	/*
	 * Cancel all entries.
	 */
	for (i = 0; i < queue->limit; i++) {
		entry_priv = queue->entries[i].priv_data;
		usb_kill_urb(entry_priv->urb);

		/*
		 * Kill guardian urb (if required by driver).
		 */
		if (kill_guard) {
			bcn_priv = queue->entries[i].priv_data;
			usb_kill_urb(bcn_priv->guardian_urb);
		}
	}
}
EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue);

341 342 343 344 345
/*
 * RX data handlers.
 */
static void rt2x00usb_interrupt_rxdone(struct urb *urb)
{
I
Ivo van Doorn 已提交
346 347
	struct queue_entry *entry = (struct queue_entry *)urb->context;
	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
348
	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
349
	u8 rxd[32];
350

351
	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
I
Ivo van Doorn 已提交
352
	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
353 354 355 356 357 358 359
		return;

	/*
	 * Check if the received data is simply too small
	 * to be actually valid, or if the urb is signaling
	 * a problem.
	 */
I
Ivo van Doorn 已提交
360
	if (urb->actual_length < entry->queue->desc_size || urb->status) {
361
		set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
I
Ivo van Doorn 已提交
362 363 364
		usb_submit_urb(urb, GFP_ATOMIC);
		return;
	}
365

366
	/*
367
	 * Fill in desc fields of the skb descriptor
368
	 */
369 370
	skbdesc->desc = rxd;
	skbdesc->desc_len = entry->queue->desc_size;
371

372 373 374
	/*
	 * Send the frame to rt2x00lib for further processing.
	 */
375
	rt2x00lib_rxdone(rt2x00dev, entry);
376 377 378 379 380 381 382
}

/*
 * Radio handlers
 */
void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
{
I
Ivo van Doorn 已提交
383
	rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0,
384 385 386
				    REGISTER_TIMEOUT);

	/*
387 388
	 * The USB version of kill_tx_queue also works
	 * on the RX queue.
389
	 */
390
	rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, QID_RX);
391 392 393 394 395 396
}
EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);

/*
 * Device initialization handlers.
 */
397
void rt2x00usb_clear_entry(struct queue_entry *entry)
398
{
399 400
	struct usb_device *usb_dev =
	    to_usb_device_intf(entry->queue->rt2x00dev->dev);
401
	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
402
	int pipe;
403

404
	if (entry->queue->qid == QID_RX) {
405 406
		pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint);
		usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe,
407 408
				entry->skb->data, entry->skb->len,
				rt2x00usb_interrupt_rxdone, entry);
409

410 411 412 413 414
		set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
		usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
	} else {
		entry->flags = 0;
	}
415
}
416
EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry);
417

418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457
static void rt2x00usb_assign_endpoint(struct data_queue *queue,
				      struct usb_endpoint_descriptor *ep_desc)
{
	struct usb_device *usb_dev = to_usb_device_intf(queue->rt2x00dev->dev);
	int pipe;

	queue->usb_endpoint = usb_endpoint_num(ep_desc);

	if (queue->qid == QID_RX) {
		pipe = usb_rcvbulkpipe(usb_dev, queue->usb_endpoint);
		queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 0);
	} else {
		pipe = usb_sndbulkpipe(usb_dev, queue->usb_endpoint);
		queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 1);
	}

	if (!queue->usb_maxpacket)
		queue->usb_maxpacket = 1;
}

static int rt2x00usb_find_endpoints(struct rt2x00_dev *rt2x00dev)
{
	struct usb_interface *intf = to_usb_interface(rt2x00dev->dev);
	struct usb_host_interface *intf_desc = intf->cur_altsetting;
	struct usb_endpoint_descriptor *ep_desc;
	struct data_queue *queue = rt2x00dev->tx;
	struct usb_endpoint_descriptor *tx_ep_desc = NULL;
	unsigned int i;

	/*
	 * Walk through all available endpoints to search for "bulk in"
	 * and "bulk out" endpoints. When we find such endpoints collect
	 * the information we need from the descriptor and assign it
	 * to the queue.
	 */
	for (i = 0; i < intf_desc->desc.bNumEndpoints; i++) {
		ep_desc = &intf_desc->endpoint[i].desc;

		if (usb_endpoint_is_bulk_in(ep_desc)) {
			rt2x00usb_assign_endpoint(rt2x00dev->rx, ep_desc);
I
Ivo van Doorn 已提交
458 459
		} else if (usb_endpoint_is_bulk_out(ep_desc) &&
			   (queue != queue_end(rt2x00dev))) {
460
			rt2x00usb_assign_endpoint(queue, ep_desc);
I
Ivo van Doorn 已提交
461
			queue = queue_next(queue);
462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487

			tx_ep_desc = ep_desc;
		}
	}

	/*
	 * At least 1 endpoint for RX and 1 endpoint for TX must be available.
	 */
	if (!rt2x00dev->rx->usb_endpoint || !rt2x00dev->tx->usb_endpoint) {
		ERROR(rt2x00dev, "Bulk-in/Bulk-out endpoints not found\n");
		return -EPIPE;
	}

	/*
	 * It might be possible not all queues have a dedicated endpoint.
	 * Loop through all TX queues and copy the endpoint information
	 * which we have gathered from already assigned endpoints.
	 */
	txall_queue_for_each(rt2x00dev, queue) {
		if (!queue->usb_endpoint)
			rt2x00usb_assign_endpoint(queue, tx_ep_desc);
	}

	return 0;
}

488
static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev,
I
Ivo van Doorn 已提交
489
			       struct data_queue *queue)
490
{
491 492
	struct queue_entry_priv_usb *entry_priv;
	struct queue_entry_priv_usb_bcn *bcn_priv;
493 494
	unsigned int i;

495 496 497 498 499 500 501
	for (i = 0; i < queue->limit; i++) {
		entry_priv = queue->entries[i].priv_data;
		entry_priv->urb = usb_alloc_urb(0, GFP_KERNEL);
		if (!entry_priv->urb)
			return -ENOMEM;
	}

502
	/*
503 504 505
	 * If this is not the beacon queue or
	 * no guardian byte was required for the beacon,
	 * then we are done.
506
	 */
507 508 509 510
	if (rt2x00dev->bcn != queue ||
	    !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
		return 0;

I
Ivo van Doorn 已提交
511
	for (i = 0; i < queue->limit; i++) {
512 513 514
		bcn_priv = queue->entries[i].priv_data;
		bcn_priv->guardian_urb = usb_alloc_urb(0, GFP_KERNEL);
		if (!bcn_priv->guardian_urb)
515 516 517 518 519 520 521
			return -ENOMEM;
	}

	return 0;
}

static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,
I
Ivo van Doorn 已提交
522
			       struct data_queue *queue)
523
{
524 525
	struct queue_entry_priv_usb *entry_priv;
	struct queue_entry_priv_usb_bcn *bcn_priv;
526 527
	unsigned int i;

I
Ivo van Doorn 已提交
528
	if (!queue->entries)
529 530
		return;

I
Ivo van Doorn 已提交
531
	for (i = 0; i < queue->limit; i++) {
532 533 534
		entry_priv = queue->entries[i].priv_data;
		usb_kill_urb(entry_priv->urb);
		usb_free_urb(entry_priv->urb);
535
	}
536 537 538 539 540 541 542 543 544 545 546 547 548 549 550

	/*
	 * If this is not the beacon queue or
	 * no guardian byte was required for the beacon,
	 * then we are done.
	 */
	if (rt2x00dev->bcn != queue ||
	    !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
		return;

	for (i = 0; i < queue->limit; i++) {
		bcn_priv = queue->entries[i].priv_data;
		usb_kill_urb(bcn_priv->guardian_urb);
		usb_free_urb(bcn_priv->guardian_urb);
	}
551 552 553 554
}

int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
{
I
Ivo van Doorn 已提交
555
	struct data_queue *queue;
556
	int status;
557

558 559 560 561 562 563 564
	/*
	 * Find endpoints for each queue
	 */
	status = rt2x00usb_find_endpoints(rt2x00dev);
	if (status)
		goto exit;

565 566 567
	/*
	 * Allocate DMA
	 */
I
Ivo van Doorn 已提交
568 569
	queue_for_each(rt2x00dev, queue) {
		status = rt2x00usb_alloc_urb(rt2x00dev, queue);
570 571 572 573 574 575 576 577 578 579 580 581 582 583 584
		if (status)
			goto exit;
	}

	return 0;

exit:
	rt2x00usb_uninitialize(rt2x00dev);

	return status;
}
EXPORT_SYMBOL_GPL(rt2x00usb_initialize);

void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev)
{
I
Ivo van Doorn 已提交
585
	struct data_queue *queue;
586

I
Ivo van Doorn 已提交
587 588
	queue_for_each(rt2x00dev, queue)
		rt2x00usb_free_urb(rt2x00dev, queue);
589 590 591 592 593 594 595 596 597 598 599 600 601 602
}
EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize);

/*
 * USB driver handlers.
 */
static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev)
{
	kfree(rt2x00dev->rf);
	rt2x00dev->rf = NULL;

	kfree(rt2x00dev->eeprom);
	rt2x00dev->eeprom = NULL;

603 604
	kfree(rt2x00dev->csr.cache);
	rt2x00dev->csr.cache = NULL;
605 606 607 608
}

static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev)
{
609 610
	rt2x00dev->csr.cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL);
	if (!rt2x00dev->csr.cache)
611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651
		goto exit;

	rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
	if (!rt2x00dev->eeprom)
		goto exit;

	rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
	if (!rt2x00dev->rf)
		goto exit;

	return 0;

exit:
	ERROR_PROBE("Failed to allocate registers.\n");

	rt2x00usb_free_reg(rt2x00dev);

	return -ENOMEM;
}

int rt2x00usb_probe(struct usb_interface *usb_intf,
		    const struct usb_device_id *id)
{
	struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
	struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info;
	struct ieee80211_hw *hw;
	struct rt2x00_dev *rt2x00dev;
	int retval;

	usb_dev = usb_get_dev(usb_dev);

	hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
	if (!hw) {
		ERROR_PROBE("Failed to allocate hardware.\n");
		retval = -ENOMEM;
		goto exit_put_device;
	}

	usb_set_intfdata(usb_intf, hw);

	rt2x00dev = hw->priv;
652
	rt2x00dev->dev = &usb_intf->dev;
653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727
	rt2x00dev->ops = ops;
	rt2x00dev->hw = hw;

	retval = rt2x00usb_alloc_reg(rt2x00dev);
	if (retval)
		goto exit_free_device;

	retval = rt2x00lib_probe_dev(rt2x00dev);
	if (retval)
		goto exit_free_reg;

	return 0;

exit_free_reg:
	rt2x00usb_free_reg(rt2x00dev);

exit_free_device:
	ieee80211_free_hw(hw);

exit_put_device:
	usb_put_dev(usb_dev);

	usb_set_intfdata(usb_intf, NULL);

	return retval;
}
EXPORT_SYMBOL_GPL(rt2x00usb_probe);

void rt2x00usb_disconnect(struct usb_interface *usb_intf)
{
	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
	struct rt2x00_dev *rt2x00dev = hw->priv;

	/*
	 * Free all allocated data.
	 */
	rt2x00lib_remove_dev(rt2x00dev);
	rt2x00usb_free_reg(rt2x00dev);
	ieee80211_free_hw(hw);

	/*
	 * Free the USB device data.
	 */
	usb_set_intfdata(usb_intf, NULL);
	usb_put_dev(interface_to_usbdev(usb_intf));
}
EXPORT_SYMBOL_GPL(rt2x00usb_disconnect);

#ifdef CONFIG_PM
int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state)
{
	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
	struct rt2x00_dev *rt2x00dev = hw->priv;
	int retval;

	retval = rt2x00lib_suspend(rt2x00dev, state);
	if (retval)
		return retval;

	/*
	 * Decrease usbdev refcount.
	 */
	usb_put_dev(interface_to_usbdev(usb_intf));

	return 0;
}
EXPORT_SYMBOL_GPL(rt2x00usb_suspend);

int rt2x00usb_resume(struct usb_interface *usb_intf)
{
	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
	struct rt2x00_dev *rt2x00dev = hw->priv;

	usb_get_dev(interface_to_usbdev(usb_intf));

728
	return rt2x00lib_resume(rt2x00dev);
729 730 731 732 733
}
EXPORT_SYMBOL_GPL(rt2x00usb_resume);
#endif /* CONFIG_PM */

/*
I
Ivo van Doorn 已提交
734
 * rt2x00usb module information.
735 736 737
 */
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
I
Ivo van Doorn 已提交
738
MODULE_DESCRIPTION("rt2x00 usb library");
739
MODULE_LICENSE("GPL");