sti_hdmi.h 2.3 KB
Newer Older
B
Benjamin Gaignard 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
/*
 * Copyright (C) STMicroelectronics SA 2014
 * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
 * License terms:  GNU General Public License (GPL), version 2
 */

#ifndef _STI_HDMI_H_
#define _STI_HDMI_H_

#include <linux/platform_device.h>

#include <drm/drmP.h>

#define HDMI_STA           0x0010
#define HDMI_STA_DLL_LCK   BIT(5)

struct sti_hdmi;

struct hdmi_phy_ops {
	bool (*start)(struct sti_hdmi *hdmi);
	void (*stop)(struct sti_hdmi *hdmi);
};

/**
 * STI hdmi structure
 *
 * @dev: driver device
 * @drm_dev: pointer to drm device
 * @mode: current display mode selected
 * @regs: hdmi register
 * @syscfg: syscfg register for pll rejection configuration
 * @clk_pix: hdmi pixel clock
 * @clk_tmds: hdmi tmds clock
 * @clk_phy: hdmi phy clock
 * @clk_audio: hdmi audio clock
 * @irq: hdmi interrupt number
 * @irq_status: interrupt status register
 * @phy_ops: phy start/stop operations
 * @enabled: true if hdmi is enabled else false
 * @hpd_gpio: hdmi hot plug detect gpio number
 * @hpd: hot plug detect status
 * @wait_event: wait event
 * @event_received: wait event status
 * @reset: reset control of the hdmi phy
 */
struct sti_hdmi {
	struct device dev;
	struct drm_device *drm_dev;
	struct drm_display_mode mode;
	void __iomem *regs;
	void __iomem *syscfg;
	struct clk *clk_pix;
	struct clk *clk_tmds;
	struct clk *clk_phy;
	struct clk *clk_audio;
	int irq;
	u32 irq_status;
	struct hdmi_phy_ops *phy_ops;
	bool enabled;
	int hpd_gpio;
	bool hpd;
	wait_queue_head_t wait_event;
	bool event_received;
	struct reset_control *reset;
};

u32 hdmi_read(struct sti_hdmi *hdmi, int offset);
void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset);

/**
 * hdmi phy config structure
 *
 * A pointer to an array of these structures is passed to a TMDS (HDMI) output
 * via the control interface to provide board and SoC specific
 * configurations of the HDMI PHY. Each entry in the array specifies a hardware
 * specific configuration for a given TMDS clock frequency range.
 *
 * @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to
 * @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to
 * @config: SoC specific register configuration
 */
struct hdmi_phy_config {
	u32 min_tmds_freq;
	u32 max_tmds_freq;
	u32 config[4];
};

#endif