kl5kusb105.c 29.1 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125
/*
 * KLSI KL5KUSB105 chip RS232 converter driver
 *
 *   Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 * All information about the device was acquired using SniffUSB ans snoopUSB
 * on Windows98.
 * It was written out of frustration with the PalmConnect USB Serial adapter
 * sold by Palm Inc.
 * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided
 * information that was not already available.
 *
 * It seems that KLSI bought some silicon-design information from ScanLogic, 
 * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI.
 * KLSI has firmware available for their devices; it is probable that the
 * firmware differs from that used by KLSI in their products. If you have an
 * original KLSI device and can provide some information on it, I would be 
 * most interested in adding support for it here. If you have any information 
 * on the protocol used (or find errors in my reverse-engineered stuff), please
 * let me know.
 *
 * The code was only tested with a PalmConnect USB adapter; if you
 * are adventurous, try it with any KLSI-based device and let me know how it
 * breaks so that I can fix it!
 */

/* TODO:
 *	check modem line signals
 *	implement handshaking or decide that we do not support it
 */

/* History:
 *   0.3a - implemented pools of write URBs
 *   0.3  - alpha version for public testing
 *   0.2  - TIOCMGET works, so autopilot(1) can be used!
 *   0.1  - can be used to to pilot-xfer -p /dev/ttyUSB0 -l
 *
 *   The driver skeleton is mainly based on mct_u232.c and various other 
 *   pieces of code shamelessly copied from the drivers/usb/serial/ directory.
 */


#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include "kl5kusb105.h"

static int debug;

/*
 * Version Information
 */
#define DRIVER_VERSION "v0.3a"
#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>"
#define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"


/*
 * Function prototypes
 */
static int  klsi_105_startup	         (struct usb_serial *serial);
static void klsi_105_shutdown	         (struct usb_serial *serial);
static int  klsi_105_open	         (struct usb_serial_port *port,
					  struct file *filp);
static void klsi_105_close	         (struct usb_serial_port *port,
					  struct file *filp);
static int  klsi_105_write	         (struct usb_serial_port *port,
					  const unsigned char *buf,
					  int count);
static void klsi_105_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
static int  klsi_105_chars_in_buffer     (struct usb_serial_port *port);
static int  klsi_105_write_room          (struct usb_serial_port *port);

static void klsi_105_read_bulk_callback  (struct urb *urb, struct pt_regs *regs);
static void klsi_105_set_termios         (struct usb_serial_port *port,
					  struct termios * old);
static int  klsi_105_ioctl	         (struct usb_serial_port *port,
					  struct file * file,
					  unsigned int cmd,
					  unsigned long arg);
static void klsi_105_throttle		 (struct usb_serial_port *port);
static void klsi_105_unthrottle		 (struct usb_serial_port *port);
/*
static void klsi_105_break_ctl	         (struct usb_serial_port *port,
					  int break_state );
 */
static int  klsi_105_tiocmget	         (struct usb_serial_port *port,
					  struct file *file);
static int  klsi_105_tiocmset	         (struct usb_serial_port *port,
					  struct file *file, unsigned int set,
					  unsigned int clear);

/*
 * All of the device info needed for the KLSI converters.
 */
static struct usb_device_id id_table [] = {
	{ USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
	{ USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) },
	{ }		/* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, id_table);

static struct usb_driver kl5kusb105d_driver = {
	.owner =	THIS_MODULE,
	.name =		"kl5kusb105d",
	.probe =	usb_serial_probe,
	.disconnect =	usb_serial_disconnect,
	.id_table =	id_table,
};

126
static struct usb_serial_driver kl5kusb105d_device = {
L
Linus Torvalds 已提交
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343
	.owner =             THIS_MODULE,
	.name =		     "KL5KUSB105D / PalmConnect",
	.short_name =	     "kl5kusb105d",
	.id_table =	     id_table,
	.num_interrupt_in =  1,
	.num_bulk_in =	     1,
	.num_bulk_out =	     1,
	.num_ports =	     1,
	.open =		     klsi_105_open,
	.close =	     klsi_105_close,
	.write =	     klsi_105_write,
	.write_bulk_callback = klsi_105_write_bulk_callback,
	.chars_in_buffer =   klsi_105_chars_in_buffer,
	.write_room =        klsi_105_write_room,
	.read_bulk_callback =klsi_105_read_bulk_callback,
	.ioctl =	     klsi_105_ioctl,
	.set_termios =	     klsi_105_set_termios,
	/*.break_ctl =	     klsi_105_break_ctl,*/
	.tiocmget =          klsi_105_tiocmget,
	.tiocmset =          klsi_105_tiocmset,
	.attach =	     klsi_105_startup,
	.shutdown =	     klsi_105_shutdown,
	.throttle =	     klsi_105_throttle,
	.unthrottle =	     klsi_105_unthrottle,
};

struct klsi_105_port_settings {
	__u8	pktlen;		/* always 5, it seems */
	__u8	baudrate;
	__u8	databits;
	__u8	unknown1;
	__u8	unknown2;
} __attribute__ ((packed));

/* we implement a pool of NUM_URBS urbs per usb_serial */
#define NUM_URBS			1
#define URB_TRANSFER_BUFFER_SIZE	64
struct klsi_105_private {
	struct klsi_105_port_settings	cfg;
	struct termios			termios;
	unsigned long			line_state; /* modem line settings */
	/* write pool */
	struct urb *			write_urb_pool[NUM_URBS];
	spinlock_t			lock;
	unsigned long			bytes_in;
	unsigned long			bytes_out;
};


/*
 * Handle vendor specific USB requests
 */


#define KLSI_TIMEOUT	 5000 /* default urb timeout */

static int klsi_105_chg_port_settings(struct usb_serial_port *port,
				      struct klsi_105_port_settings *settings)
{
	int rc;

        rc = usb_control_msg(port->serial->dev,
			     usb_sndctrlpipe(port->serial->dev, 0),
			     KL5KUSB105A_SIO_SET_DATA,
                             USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
			     0, /* value */
			     0, /* index */
			     settings,
			     sizeof(struct klsi_105_port_settings),
			     KLSI_TIMEOUT);
	if (rc < 0)
		err("Change port settings failed (error = %d)", rc);
	info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d",
	    __FUNCTION__,
	    settings->pktlen,
	    settings->baudrate, settings->databits,
	    settings->unknown1, settings->unknown2);
        return rc;
} /* klsi_105_chg_port_settings */

/* translate a 16-bit status value from the device to linux's TIO bits */
static unsigned long klsi_105_status2linestate(const __u16 status)
{
	unsigned long res = 0;

	res =   ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0)
	      | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0)
	      ;

	return res;
}
/* 
 * Read line control via vendor command and return result through
 * *line_state_p 
 */
/* It seems that the status buffer has always only 2 bytes length */
#define KLSI_STATUSBUF_LEN	2
static int klsi_105_get_line_state(struct usb_serial_port *port,
				   unsigned long *line_state_p)
{
	int rc;
	__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1};
	__u16 status;

	info("%s - sending SIO Poll request", __FUNCTION__);
        rc = usb_control_msg(port->serial->dev,
			     usb_rcvctrlpipe(port->serial->dev, 0),
			     KL5KUSB105A_SIO_POLL,
                             USB_TYPE_VENDOR | USB_DIR_IN,
			     0, /* value */
			     0, /* index */
			     status_buf, KLSI_STATUSBUF_LEN,
			     10000
			     );
	if (rc < 0)
		err("Reading line status failed (error = %d)", rc);
	else {
		status = status_buf[0] + (status_buf[1]<<8);

		info("%s - read status %x %x", __FUNCTION__,
		     status_buf[0], status_buf[1]);

		*line_state_p = klsi_105_status2linestate(status);
	}

        return rc;
}


/*
 * Driver's tty interface functions
 */

static int klsi_105_startup (struct usb_serial *serial)
{
	struct klsi_105_private *priv;
	int i;

	/* check if we support the product id (see keyspan.c)
	 * FIXME
	 */

	/* allocate the private data structure */
	for (i=0; i<serial->num_ports; i++) {
		int j;
		priv = kmalloc(sizeof(struct klsi_105_private),
						   GFP_KERNEL);
		if (!priv) {
			dbg("%skmalloc for klsi_105_private failed.", __FUNCTION__);
			return -ENOMEM;
		}
		/* set initial values for control structures */
		priv->cfg.pktlen    = 5;
		priv->cfg.baudrate  = kl5kusb105a_sio_b9600;
		priv->cfg.databits  = kl5kusb105a_dtb_8;
		priv->cfg.unknown1  = 0;
		priv->cfg.unknown2  = 1;

		priv->line_state    = 0;

		priv->bytes_in	    = 0;
		priv->bytes_out	    = 0;
		usb_set_serial_port_data(serial->port[i], priv);

		spin_lock_init (&priv->lock);
		for (j=0; j<NUM_URBS; j++) {
			struct urb* urb = usb_alloc_urb(0, GFP_KERNEL);

			priv->write_urb_pool[j] = urb;
			if (urb == NULL) {
				err("No more urbs???");
				continue;
			}

			urb->transfer_buffer = NULL;
			urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE,
							GFP_KERNEL);
			if (!urb->transfer_buffer) {
				err("%s - out of memory for urb buffers.", __FUNCTION__);
				continue;
			}
		}

		/* priv->termios is left uninitalized until port opening */
		init_waitqueue_head(&serial->port[i]->write_wait);
	}
	
	return (0);
} /* klsi_105_startup */


static void klsi_105_shutdown (struct usb_serial *serial)
{
	int i;
	
	dbg("%s", __FUNCTION__);

	/* stop reads and writes on all ports */
	for (i=0; i < serial->num_ports; ++i) {
		struct klsi_105_private *priv = usb_get_serial_port_data(serial->port[i]);
		unsigned long flags;

		if (priv) {
			/* kill our write urb pool */
			int j;
			struct urb **write_urbs = priv->write_urb_pool;
			spin_lock_irqsave(&priv->lock,flags);

			for (j = 0; j < NUM_URBS; j++) {
				if (write_urbs[j]) {
					/* FIXME - uncomment the following
					 * usb_kill_urb call when the host
					 * controllers get fixed to set
					 * urb->dev = NULL after the urb is
					 * finished.  Otherwise this call
					 * oopses. */
					/* usb_kill_urb(write_urbs[j]); */
344
					kfree(write_urbs[j]->transfer_buffer);
L
Linus Torvalds 已提交
345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033
					usb_free_urb (write_urbs[j]);
				}
			}

			spin_unlock_irqrestore (&priv->lock, flags);

			kfree(priv);
			usb_set_serial_port_data(serial->port[i], NULL);
		}
	}
} /* klsi_105_shutdown */

static int  klsi_105_open (struct usb_serial_port *port, struct file *filp)
{
	struct klsi_105_private *priv = usb_get_serial_port_data(port);
	int retval = 0;
	int rc;
	int i;
	unsigned long line_state;
	struct klsi_105_port_settings cfg;
	unsigned long flags;

	dbg("%s port %d", __FUNCTION__, port->number);

	/* force low_latency on so that our tty_push actually forces
	 * the data through
	 * port->tty->low_latency = 1; */

	/* Do a defined restart:
	 * Set up sane default baud rate and send the 'READ_ON'
	 * vendor command. 
	 * FIXME: set modem line control (how?)
	 * Then read the modem line control and store values in
	 * priv->line_state.
	 */
	cfg.pktlen   = 5;
	cfg.baudrate = kl5kusb105a_sio_b9600;
	cfg.databits = kl5kusb105a_dtb_8;
	cfg.unknown1 = 0;
	cfg.unknown2 = 1;
	klsi_105_chg_port_settings(port, &cfg);
	
	/* set up termios structure */
	spin_lock_irqsave (&priv->lock, flags);
	priv->termios.c_iflag = port->tty->termios->c_iflag;
	priv->termios.c_oflag = port->tty->termios->c_oflag;
	priv->termios.c_cflag = port->tty->termios->c_cflag;
	priv->termios.c_lflag = port->tty->termios->c_lflag;
	for (i=0; i<NCCS; i++)
		priv->termios.c_cc[i] = port->tty->termios->c_cc[i];
	priv->cfg.pktlen   = cfg.pktlen;
	priv->cfg.baudrate = cfg.baudrate;
	priv->cfg.databits = cfg.databits;
	priv->cfg.unknown1 = cfg.unknown1;
	priv->cfg.unknown2 = cfg.unknown2;
	spin_unlock_irqrestore (&priv->lock, flags);

	/* READ_ON and urb submission */
	usb_fill_bulk_urb(port->read_urb, port->serial->dev, 
		      usb_rcvbulkpipe(port->serial->dev,
				      port->bulk_in_endpointAddress),
		      port->read_urb->transfer_buffer,
		      port->read_urb->transfer_buffer_length,
		      klsi_105_read_bulk_callback,
		      port);

	rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
	if (rc) {
		err("%s - failed submitting read urb, error %d", __FUNCTION__, rc);
		retval = rc;
		goto exit;
	}

	rc = usb_control_msg(port->serial->dev,
			     usb_sndctrlpipe(port->serial->dev,0),
			     KL5KUSB105A_SIO_CONFIGURE,
			     USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE,
			     KL5KUSB105A_SIO_CONFIGURE_READ_ON,
			     0, /* index */
			     NULL,
			     0,
			     KLSI_TIMEOUT);
	if (rc < 0) {
		err("Enabling read failed (error = %d)", rc);
		retval = rc;
	} else 
		dbg("%s - enabled reading", __FUNCTION__);

	rc = klsi_105_get_line_state(port, &line_state);
	if (rc >= 0) {
		spin_lock_irqsave (&priv->lock, flags);
		priv->line_state = line_state;
		spin_unlock_irqrestore (&priv->lock, flags);
		dbg("%s - read line state 0x%lx", __FUNCTION__, line_state);
		retval = 0;
	} else
		retval = rc;

exit:
	return retval;
} /* klsi_105_open */


static void klsi_105_close (struct usb_serial_port *port, struct file *filp)
{
	struct klsi_105_private *priv = usb_get_serial_port_data(port);
	int rc;

	dbg("%s port %d", __FUNCTION__, port->number);

	/* send READ_OFF */
	rc = usb_control_msg (port->serial->dev,
			      usb_sndctrlpipe(port->serial->dev, 0),
			      KL5KUSB105A_SIO_CONFIGURE,
			      USB_TYPE_VENDOR | USB_DIR_OUT,
			      KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
			      0, /* index */
			      NULL, 0,
			      KLSI_TIMEOUT);
	if (rc < 0)
		    err("Disabling read failed (error = %d)", rc);

	/* shutdown our bulk reads and writes */
	usb_kill_urb(port->write_urb);
	usb_kill_urb(port->read_urb);
	/* unlink our write pool */
	/* FIXME */
	/* wgg - do I need this? I think so. */
	usb_kill_urb(port->interrupt_in_urb);
	info("kl5kusb105 port stats: %ld bytes in, %ld bytes out", priv->bytes_in, priv->bytes_out);
} /* klsi_105_close */


/* We need to write a complete 64-byte data block and encode the
 * number actually sent in the first double-byte, LSB-order. That 
 * leaves at most 62 bytes of payload.
 */
#define KLSI_105_DATA_OFFSET	2   /* in the bulk urb data block */


static int klsi_105_write (struct usb_serial_port *port,
			   const unsigned char *buf, int count)
{
	struct klsi_105_private *priv = usb_get_serial_port_data(port);
	int result, size;
	int bytes_sent=0;

	dbg("%s - port %d", __FUNCTION__, port->number);

	while (count > 0) {
		/* try to find a free urb (write 0 bytes if none) */
		struct urb *urb = NULL;
		unsigned long flags;
		int i;
		/* since the pool is per-port we might not need the spin lock !? */
		spin_lock_irqsave (&priv->lock, flags);
		for (i=0; i<NUM_URBS; i++) {
			if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
				urb = priv->write_urb_pool[i];
				dbg("%s - using pool URB %d", __FUNCTION__, i);
				break;
			}
		}
		spin_unlock_irqrestore (&priv->lock, flags);

		if (urb==NULL) {
			dbg("%s - no more free urbs", __FUNCTION__);
			goto exit;
		}

		if (urb->transfer_buffer == NULL) {
			urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
			if (urb->transfer_buffer == NULL) {
				err("%s - no more kernel memory...", __FUNCTION__);
				goto exit;
			}
		}

		size = min (count, port->bulk_out_size - KLSI_105_DATA_OFFSET);
		size = min (size, URB_TRANSFER_BUFFER_SIZE - KLSI_105_DATA_OFFSET);

		memcpy (urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size);

		/* write payload size into transfer buffer */
		((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF);
		((__u8 *)urb->transfer_buffer)[1] = (__u8) ((size & 0xFF00)>>8);

		/* set up our urb */
		usb_fill_bulk_urb(urb, port->serial->dev,
			      usb_sndbulkpipe(port->serial->dev,
					      port->bulk_out_endpointAddress),
			      urb->transfer_buffer,
			      URB_TRANSFER_BUFFER_SIZE,
			      klsi_105_write_bulk_callback,
			      port);

		/* send the data out the bulk port */
		result = usb_submit_urb(urb, GFP_ATOMIC);
		if (result) {
			err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
			goto exit;
		}
		buf += size;
		bytes_sent += size;
		count -= size;
	}
exit:
	/* lockless, but it's for debug info only... */
	priv->bytes_out+=bytes_sent;

	return bytes_sent;	/* that's how much we wrote */
} /* klsi_105_write */

static void klsi_105_write_bulk_callback ( struct urb *urb, struct pt_regs *regs)
{
	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;

	dbg("%s - port %d", __FUNCTION__, port->number);
	
	if (urb->status) {
		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
		    urb->status);
		return;
	}

	/* from generic_write_bulk_callback */
	schedule_work(&port->work);
} /* klsi_105_write_bulk_completion_callback */


/* return number of characters currently in the writing process */
static int klsi_105_chars_in_buffer (struct usb_serial_port *port)
{
	int chars = 0;
	int i;
	unsigned long flags;
	struct klsi_105_private *priv = usb_get_serial_port_data(port);

	spin_lock_irqsave (&priv->lock, flags);

	for (i = 0; i < NUM_URBS; ++i) {
		if (priv->write_urb_pool[i]->status == -EINPROGRESS) {
			chars += URB_TRANSFER_BUFFER_SIZE;
		}
	}

	spin_unlock_irqrestore (&priv->lock, flags);

	dbg("%s - returns %d", __FUNCTION__, chars);
	return (chars);
}

static int klsi_105_write_room (struct usb_serial_port *port)
{
	unsigned long flags;
	int i;
	int room = 0;
	struct klsi_105_private *priv = usb_get_serial_port_data(port);

	spin_lock_irqsave (&priv->lock, flags);
	for (i = 0; i < NUM_URBS; ++i) {
		if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
			room += URB_TRANSFER_BUFFER_SIZE;
		}
	}

	spin_unlock_irqrestore (&priv->lock, flags);

	dbg("%s - returns %d", __FUNCTION__, room);
	return (room);
}



static void klsi_105_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
	struct klsi_105_private *priv = usb_get_serial_port_data(port);
	struct tty_struct *tty;
	unsigned char *data = urb->transfer_buffer;
	int rc;

        dbg("%s - port %d", __FUNCTION__, port->number);

	/* The urb might have been killed. */
        if (urb->status) {
                dbg("%s - nonzero read bulk status received: %d", __FUNCTION__,
		    urb->status);
                return;
        }
	
	/* The data received is again preceded by a length double-byte in LSB-
	 * first order (see klsi_105_write() )
	 */
	if (urb->actual_length == 0) {
		/* empty urbs seem to happen, we ignore them */
		/* dbg("%s - emtpy URB", __FUNCTION__); */
	       ;
	} else if (urb->actual_length <= 2) {
		dbg("%s - size %d URB not understood", __FUNCTION__,
		    urb->actual_length);
		usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
				      urb->actual_length, data);
	} else {
		int i;
		int bytes_sent = ((__u8 *) data)[0] +
				 ((unsigned int) ((__u8 *) data)[1] << 8);
		tty = port->tty;
		/* we should immediately resubmit the URB, before attempting
		 * to pass the data on to the tty layer. But that needs locking
		 * against re-entry an then mixed-up data because of
		 * intermixed tty_flip_buffer_push()s
		 * FIXME
		 */ 
		usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
				      urb->actual_length, data);

		if (bytes_sent + 2 > urb->actual_length) {
			dbg("%s - trying to read more data than available"
			    " (%d vs. %d)", __FUNCTION__,
			    bytes_sent+2, urb->actual_length);
			/* cap at implied limit */
			bytes_sent = urb->actual_length - 2;
		}

		for (i = 2; i < 2+bytes_sent; i++) {
			/* if we insert more than TTY_FLIPBUF_SIZE characters,
			 * we drop them. */
			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
				tty_flip_buffer_push(tty);
			}
			/* this doesn't actually push the data through unless 
			 * tty->low_latency is set */
			tty_insert_flip_char(tty, ((__u8*) data)[i], 0);
		}
		tty_flip_buffer_push(tty);

		/* again lockless, but debug info only */
		priv->bytes_in += bytes_sent;
	}
	/* Continue trying to always read  */
	usb_fill_bulk_urb(port->read_urb, port->serial->dev, 
		      usb_rcvbulkpipe(port->serial->dev,
				      port->bulk_in_endpointAddress),
		      port->read_urb->transfer_buffer,
		      port->read_urb->transfer_buffer_length,
		      klsi_105_read_bulk_callback,
		      port);
	rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
	if (rc)
		err("%s - failed resubmitting read urb, error %d", __FUNCTION__, rc);
} /* klsi_105_read_bulk_callback */


static void klsi_105_set_termios (struct usb_serial_port *port,
				  struct termios *old_termios)
{
	struct klsi_105_private *priv = usb_get_serial_port_data(port);
	unsigned int iflag = port->tty->termios->c_iflag;
	unsigned int old_iflag = old_termios->c_iflag;
	unsigned int cflag = port->tty->termios->c_cflag;
	unsigned int old_cflag = old_termios->c_cflag;
	struct klsi_105_port_settings cfg;
	unsigned long flags;
	
	/* lock while we are modifying the settings */
	spin_lock_irqsave (&priv->lock, flags);
	
	/*
	 * Update baud rate
	 */
	if( (cflag & CBAUD) != (old_cflag & CBAUD) ) {
	        /* reassert DTR and (maybe) RTS on transition from B0 */
		if( (old_cflag & CBAUD) == B0 ) {
			dbg("%s: baud was B0", __FUNCTION__);
#if 0
			priv->control_state |= TIOCM_DTR;
			/* don't set RTS if using hardware flow control */
			if (!(old_cflag & CRTSCTS)) {
				priv->control_state |= TIOCM_RTS;
			}
			mct_u232_set_modem_ctrl(serial, priv->control_state);
#endif
		}
		
		switch(cflag & CBAUD) {
		case B0: /* handled below */
			break;
		case B1200: priv->cfg.baudrate = kl5kusb105a_sio_b1200;
			break;
		case B2400: priv->cfg.baudrate = kl5kusb105a_sio_b2400;
			break;
		case B4800: priv->cfg.baudrate = kl5kusb105a_sio_b4800;
			break;
		case B9600: priv->cfg.baudrate = kl5kusb105a_sio_b9600;
			break;
		case B19200: priv->cfg.baudrate = kl5kusb105a_sio_b19200;
			break;
		case B38400: priv->cfg.baudrate = kl5kusb105a_sio_b38400;
			break;
		case B57600: priv->cfg.baudrate = kl5kusb105a_sio_b57600;
			break;
		case B115200: priv->cfg.baudrate = kl5kusb105a_sio_b115200;
			break;
		default:
			err("KLSI USB->Serial converter:"
			    " unsupported baudrate request, using default"
			    " of 9600");
			priv->cfg.baudrate = kl5kusb105a_sio_b9600;
			break;
		}
		if ((cflag & CBAUD) == B0 ) {
			dbg("%s: baud is B0", __FUNCTION__);
			/* Drop RTS and DTR */
			/* maybe this should be simulated by sending read
			 * disable and read enable messages?
			 */
			;
#if 0
			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
        		mct_u232_set_modem_ctrl(serial, priv->control_state);
#endif
		}
	}

	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
		/* set the number of data bits */
		switch (cflag & CSIZE) {
		case CS5:
			dbg("%s - 5 bits/byte not supported", __FUNCTION__);
			spin_unlock_irqrestore (&priv->lock, flags);
			return ;
		case CS6:
			dbg("%s - 6 bits/byte not supported", __FUNCTION__);
			spin_unlock_irqrestore (&priv->lock, flags);
			return ;
		case CS7:
			priv->cfg.databits = kl5kusb105a_dtb_7;
			break;
		case CS8:
			priv->cfg.databits = kl5kusb105a_dtb_8;
			break;
		default:
			err("CSIZE was not CS5-CS8, using default of 8");
			priv->cfg.databits = kl5kusb105a_dtb_8;
			break;
		}
	}

	/*
	 * Update line control register (LCR)
	 */
	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
	    || (cflag & CSTOPB) != (old_cflag & CSTOPB) ) {
		
#if 0
		priv->last_lcr = 0;

		/* set the parity */
		if (cflag & PARENB)
			priv->last_lcr |= (cflag & PARODD) ?
				MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
		else
			priv->last_lcr |= MCT_U232_PARITY_NONE;

		/* set the number of stop bits */
		priv->last_lcr |= (cflag & CSTOPB) ?
			MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;

		mct_u232_set_line_ctrl(serial, priv->last_lcr);
#endif
		;
	}
	
	/*
	 * Set flow control: well, I do not really now how to handle DTR/RTS.
	 * Just do what we have seen with SniffUSB on Win98.
	 */
	if( (iflag & IXOFF) != (old_iflag & IXOFF)
	    || (iflag & IXON) != (old_iflag & IXON)
	    ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) {
		
		/* Drop DTR/RTS if no flow control otherwise assert */
#if 0
		if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) )
			priv->control_state |= TIOCM_DTR | TIOCM_RTS;
		else
			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
		mct_u232_set_modem_ctrl(serial, priv->control_state);
#endif
		;
	}
	memcpy (&cfg, &priv->cfg, sizeof(cfg));
	spin_unlock_irqrestore (&priv->lock, flags);
	
	/* now commit changes to device */
	klsi_105_chg_port_settings(port, &cfg);
} /* klsi_105_set_termios */


#if 0
static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
{
	struct usb_serial *serial = port->serial;
	struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
	unsigned char lcr = priv->last_lcr;

	dbg("%sstate=%d", __FUNCTION__, break_state);

	if (break_state)
		lcr |= MCT_U232_SET_BREAK;

	mct_u232_set_line_ctrl(serial, lcr);
} /* mct_u232_break_ctl */
#endif

static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file)
{
	struct klsi_105_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	int rc;
	unsigned long line_state;
	dbg("%s - request, just guessing", __FUNCTION__);

	rc = klsi_105_get_line_state(port, &line_state);
	if (rc < 0) {
		err("Reading line control failed (error = %d)", rc);
		/* better return value? EAGAIN? */
		return rc;
	}

	spin_lock_irqsave (&priv->lock, flags);
	priv->line_state = line_state;
	spin_unlock_irqrestore (&priv->lock, flags);
	dbg("%s - read line state 0x%lx", __FUNCTION__, line_state);
	return (int)line_state;
}

static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file,
			      unsigned int set, unsigned int clear)
{
	int retval = -EINVAL;
	
	dbg("%s", __FUNCTION__);

/* if this ever gets implemented, it should be done something like this:
	struct usb_serial *serial = port->serial;
	struct klsi_105_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	int control;

	spin_lock_irqsave (&priv->lock, flags);
	if (set & TIOCM_RTS)
		priv->control_state |= TIOCM_RTS;
	if (set & TIOCM_DTR)
		priv->control_state |= TIOCM_DTR;
	if (clear & TIOCM_RTS)
		priv->control_state &= ~TIOCM_RTS;
	if (clear & TIOCM_DTR)
		priv->control_state &= ~TIOCM_DTR;
	control = priv->control_state;
	spin_unlock_irqrestore (&priv->lock, flags);
	retval = mct_u232_set_modem_ctrl(serial, control);
*/
	return retval;
}
					
static int klsi_105_ioctl (struct usb_serial_port *port, struct file * file,
			   unsigned int cmd, unsigned long arg)
{
	struct klsi_105_private *priv = usb_get_serial_port_data(port);
	void __user *user_arg = (void __user *)arg;
	
	dbg("%scmd=0x%x", __FUNCTION__, cmd);

	/* Based on code from acm.c and others */
	switch (cmd) {
	case TIOCMIWAIT:
		/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
		/* TODO */
		dbg("%s - TIOCMIWAIT not handled", __FUNCTION__);
		return -ENOIOCTLCMD;
	case TIOCGICOUNT:
		/* return count of modemline transitions */
		/* TODO */
		dbg("%s - TIOCGICOUNT not handled", __FUNCTION__);
		return -ENOIOCTLCMD;
	case TCGETS:
		/* return current info to caller */
		dbg("%s - TCGETS data faked/incomplete", __FUNCTION__);

		if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios)))
			return -EFAULT;

		if (kernel_termios_to_user_termios((struct termios __user *)arg,
						   &priv->termios))
			return -EFAULT;
		return 0;
	case TCSETS:
		/* set port termios to the one given by the user */
		dbg("%s - TCSETS not handled", __FUNCTION__);

		if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios)))
			return -EFAULT;

		if (user_termios_to_kernel_termios(&priv->termios,
						   (struct termios __user *)arg))
			return -EFAULT;
		klsi_105_set_termios(port, &priv->termios);
		return 0;
	case TCSETSW: {
		/* set port termios and try to wait for completion of last
		 * write operation */
		/* We guess here. If there are not too many write urbs
		 * outstanding, we lie. */
		/* what is the right way to wait here? schedule() ? */
	        /*
		while (klsi_105_chars_in_buffer(port) > (NUM_URBS / 4 ) * URB_TRANSFER_BUFFER_SIZE)
			    schedule();
		 */
		return -ENOIOCTLCMD;
		      }
	default:
		dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd);
		return(-ENOIOCTLCMD);
		break;
	}
	return 0;
} /* klsi_105_ioctl */

static void klsi_105_throttle (struct usb_serial_port *port)
{
	dbg("%s - port %d", __FUNCTION__, port->number);
	usb_kill_urb(port->read_urb);
}

static void klsi_105_unthrottle (struct usb_serial_port *port)
{
	int result;

	dbg("%s - port %d", __FUNCTION__, port->number);

	port->read_urb->dev = port->serial->dev;
	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
	if (result)
		err("%s - failed submitting read urb, error %d", __FUNCTION__,
		    result);
}



static int __init klsi_105_init (void)
{
	int retval;
	retval = usb_serial_register(&kl5kusb105d_device);
	if (retval)
		goto failed_usb_serial_register;
	retval = usb_register(&kl5kusb105d_driver);
	if (retval)
		goto failed_usb_register;

	info(DRIVER_DESC " " DRIVER_VERSION);
	return 0;
failed_usb_register:
	usb_serial_deregister(&kl5kusb105d_device);
failed_usb_serial_register:
	return retval;
}


static void __exit klsi_105_exit (void)
{
	usb_deregister (&kl5kusb105d_driver);
	usb_serial_deregister (&kl5kusb105d_device);
}


module_init (klsi_105_init);
module_exit (klsi_105_exit);

MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL"); 


module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "enable extensive debugging messages");

/* vim: set sts=8 ts=8 sw=8: */