Kconfig 29.5 KB
Newer Older
1
#
2
# Hardware monitoring chip drivers configuration
3 4
#

5
menuconfig HWMON
6
	tristate "Hardware Monitoring support"
7
	depends on HAS_IOMEM
8 9 10 11 12 13
	default y
	help
	  Hardware monitoring devices let you monitor the hardware health
	  of a system. Most modern motherboards include such a device. It
	  can include temperature sensors, voltage sensors, fan speed
	  sensors and various additional features such as the ability to
14 15 16 17
	  control the speed of the fans.  If you want this support you
	  should say Y here and also to the specific driver(s) for your
	  sensors chip(s) below.

18 19 20 21
	  To find out which specific driver(s) you need, use the
	  sensors-detect script from the lm_sensors package.  Read
	  <file:Documentation/hwmon/userspace-tools> for details.

22 23
	  This support can also be built as a module.  If so, the module
	  will be called hwmon.
24

25 26
if HWMON

27 28 29 30
config HWMON_VID
	tristate
	default n

31
config SENSORS_ABITUGURU
32
	tristate "Abit uGuru (rev 1 & 2)"
33
	depends on X86 && EXPERIMENTAL
34
	help
35 36 37 38 39 40 41
	  If you say yes here you get support for the sensor part of the first
	  and second revision of the Abit uGuru chip. The voltage and frequency
	  control parts of the Abit uGuru are not supported. The Abit uGuru
	  chip can be found on Abit uGuru featuring motherboards (most modern
	  Abit motherboards from before end 2005). For more info and a list
	  of which motherboards have which revision see
	  Documentation/hwmon/abituguru
42 43 44 45

	  This driver can also be built as a module.  If so, the module
	  will be called abituguru.

46 47
config SENSORS_ABITUGURU3
	tristate "Abit uGuru (rev 3)"
48
	depends on X86 && EXPERIMENTAL
49 50 51 52 53 54 55 56 57 58 59
	help
	  If you say yes here you get support for the sensor part of the
	  third revision of the Abit uGuru chip. Only reading the sensors
	  and their settings is supported. The third revision of the Abit
	  uGuru chip can be found on recent Abit motherboards (since end
	  2005). For more info and a list of which motherboards have which
	  revision see Documentation/hwmon/abituguru3

	  This driver can also be built as a module.  If so, the module
	  will be called abituguru3.

S
Sean MacLennan 已提交
60 61 62 63 64 65 66 67 68 69
config SENSORS_AD7414
	tristate "Analog Devices AD7414"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  AD7414 temperature monitoring chip.

	  This driver can also be built as a module. If so, the module
	  will be called ad7414.

70 71
config SENSORS_AD7418
	tristate "Analog Devices AD7416, AD7417 and AD7418"
72
	depends on I2C && EXPERIMENTAL
73 74 75 76 77 78 79
	help
	  If you say yes here you get support for the Analog Devices
	  AD7416, AD7417 and AD7418 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called ad7418.

80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
config SENSORS_ADCXX
	tristate "National Semiconductor ADCxxxSxxx"
	depends on SPI_MASTER && EXPERIMENTAL
	help
	  If you say yes here you get support for the National Semiconductor
	  ADC<bb><c>S<sss> chip family, where
	  * bb  is the resolution in number of bits (8, 10, 12)
	  * c   is the number of channels (1, 2, 4, 8)
	  * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
	    kSPS and 101 for 1 MSPS)

	  Examples : ADC081S101, ADC124S501, ...

	  This driver can also be built as a module.  If so, the module
	  will be called adcxx.

96 97
config SENSORS_ADM1021
	tristate "Analog Devices ADM1021 and compatibles"
98
	depends on I2C
99 100 101 102 103 104 105 106 107 108 109
	help
	  If you say yes here you get support for Analog Devices ADM1021
	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	  and the XEON processor built-in sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1021.

config SENSORS_ADM1025
	tristate "Analog Devices ADM1025 and compatibles"
110
	depends on I2C
111
	select HWMON_VID
112 113 114 115 116 117 118 119 120
	help
	  If you say yes here you get support for Analog Devices ADM1025
	  and Philips NE1619 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1025.

config SENSORS_ADM1026
	tristate "Analog Devices ADM1026 and compatibles"
121
	depends on I2C && EXPERIMENTAL
122
	select HWMON_VID
123 124 125 126 127 128 129
	help
	  If you say yes here you get support for Analog Devices ADM1026
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1026.

130 131
config SENSORS_ADM1029
	tristate "Analog Devices ADM1029"
132
	depends on I2C && EXPERIMENTAL
133 134 135 136 137 138 139 140
	help
	  If you say yes here you get support for Analog Devices ADM1029
	  sensor chip.
	  Very rare chip, please let us know you use it.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1029.

141 142
config SENSORS_ADM1031
	tristate "Analog Devices ADM1031 and compatibles"
143
	depends on I2C && EXPERIMENTAL
144 145 146 147 148 149 150 151 152
	help
	  If you say yes here you get support for Analog Devices ADM1031
	  and ADM1030 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1031.

config SENSORS_ADM9240
	tristate "Analog Devices ADM9240 and compatibles"
153
	depends on I2C
154
	select HWMON_VID
155 156 157 158 159 160 161
	help
	  If you say yes here you get support for Analog Devices ADM9240,
	  Dallas DS1780, National Semiconductor LM81 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm9240.

162 163 164 165 166 167 168 169 170 171
config SENSORS_ADT7462
	tristate "Analog Devices ADT7462"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7462 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called adt7462.

172 173 174 175 176 177 178 179 180 181
config SENSORS_ADT7470
	tristate "Analog Devices ADT7470"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7470 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called adt7470.

182 183 184 185 186 187 188 189 190 191
config SENSORS_ADT7473
	tristate "Analog Devices ADT7473"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7473 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called adt7473.

192 193 194 195 196 197 198 199 200 201
config SENSORS_ADT7475
	tristate "Analog Devices ADT7475"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7475 hardware monitoring chips.

	  This driver can also be build as a module.  If so, the module
	  will be called adt7475.

R
Rudolf Marek 已提交
202
config SENSORS_K8TEMP
203
	tristate "AMD Athlon64/FX or Opteron temperature sensor"
204
	depends on X86 && PCI && EXPERIMENTAL
R
Rudolf Marek 已提交
205 206
	help
	  If you say yes here you get support for the temperature
207 208 209
	  sensor(s) inside your CPU. Supported is whole AMD K8
	  microarchitecture. Please note that you will need at least
	  lm-sensors 2.10.1 for proper userspace support.
R
Rudolf Marek 已提交
210 211 212 213

	  This driver can also be built as a module.  If so, the module
	  will be called k8temp.

214 215
config SENSORS_AMS
	tristate "Apple Motion Sensor driver"
216
	depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
217
	select INPUT_POLLDEV
218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239
	help
	  Support for the motion sensor included in PowerBooks. Includes
	  implementations for PMU and I2C.

	  This driver can also be built as a module. If so, the module
	  will be called ams.

config SENSORS_AMS_PMU
	bool "PMU variant"
	depends on SENSORS_AMS && ADB_PMU
	default y
	help
	  PMU variant of motion sensor, found in late 2005 PowerBooks.

config SENSORS_AMS_I2C
	bool "I2C variant"
	depends on SENSORS_AMS && I2C
	default y
	help
	  I2C variant of motion sensor, found in early 2005 PowerBooks and
	  iBooks.

240 241
config SENSORS_ASB100
	tristate "Asus ASB100 Bach"
242
	depends on X86 && I2C && EXPERIMENTAL
243
	select HWMON_VID
244 245 246 247 248 249 250 251 252
	help
	  If you say yes here you get support for the ASB100 Bach sensor
	  chip found on some Asus mainboards.

	  This driver can also be built as a module.  If so, the module
	  will be called asb100.

config SENSORS_ATXP1
	tristate "Attansic ATXP1 VID controller"
253
	depends on I2C && EXPERIMENTAL
254
	select HWMON_VID
255 256 257 258 259 260 261 262 263 264 265 266
	help
	  If you say yes here you get support for the Attansic ATXP1 VID
	  controller.

	  If your board have such a chip, you are able to control your CPU
	  core and other voltages.

	  This driver can also be built as a module.  If so, the module
	  will be called atxp1.

config SENSORS_DS1621
	tristate "Dallas Semiconductor DS1621 and DS1625"
267
	depends on I2C
268 269 270 271 272 273 274
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1621 and DS1625 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called ds1621.

275 276 277 278 279 280 281 282 283 284
config SENSORS_I5K_AMB
	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
	depends on PCI && EXPERIMENTAL
	help
	  If you say yes here you get support for FB-DIMM AMB temperature
	  monitoring chips on systems with the Intel 5000 series chipset.

	  This driver can also be built as a module. If so, the module
	  will be called i5k_amb.

285
config SENSORS_F71805F
286
	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
287
	depends on EXPERIMENTAL
288 289
	help
	  If you say yes here you get support for hardware monitoring
290 291
	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
	  Super-I/O chips.
292 293 294 295

	  This driver can also be built as a module.  If so, the module
	  will be called f71805f.

296
config SENSORS_F71882FG
297
	tristate "Fintek F71862FG, F71882FG and F8000"
298 299 300
	depends on EXPERIMENTAL
	help
	  If you say yes here you get support for hardware monitoring
301 302
	  features of the Fintek F71882FG/F71883FG, F71862FG/71863FG
	  and F8000 Super-I/O chips.
303 304 305 306

	  This driver can also be built as a module.  If so, the module
	  will be called f71882fg.

R
Riku Voipio 已提交
307 308 309 310 311 312 313 314 315 316
config SENSORS_F75375S
	tristate "Fintek F75375S/SP and F75373";
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for hardware monitoring
	  features of the Fintek F75375S/SP and F75373

	  This driver can also be built as a module.  If so, the module
	  will be called f75375s.

317
config SENSORS_FSCHER
318
	tristate "FSC Hermes (DEPRECATED)"
319
	depends on X86 && I2C
320
	help
321 322 323 324
	  This driver is DEPRECATED please use the new merged fschmd
	  ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
	  instead.

325 326 327 328 329 330 331
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Hermes sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscher.

config SENSORS_FSCPOS
332
	tristate "FSC Poseidon (DEPRECATED)"
333
	depends on X86 && I2C
334
	help
335 336 337 338
	  This driver is DEPRECATED please use the new merged fschmd
	  ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
	  instead.

339 340 341 342 343 344
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Poseidon sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscpos.

345
config SENSORS_FSCHMD
346
	tristate "Fujitsu Siemens Computers sensor chips"
347
	depends on X86 && I2C
348
	help
349 350
	  If you say yes here you get support for the following Fujitsu
	  Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
351 352
	  Heimdall, Heracles, Hades and Syleus including support for the
	  integrated watchdog.
353

354 355 356
	  This is a merged driver for FSC sensor chips replacing the fscpos,
	  fscscy and fscher drivers and adding support for several other FSC
	  sensor chips.
357 358 359 360

	  This driver can also be built as a module.  If so, the module
	  will be called fschmd.

361 362
config SENSORS_GL518SM
	tristate "Genesys Logic GL518SM"
363
	depends on I2C
364 365 366 367 368 369 370 371 372
	help
	  If you say yes here you get support for Genesys Logic GL518SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl518sm.

config SENSORS_GL520SM
	tristate "Genesys Logic GL520SM"
373
	depends on I2C
374
	select HWMON_VID
375 376 377 378 379 380 381
	help
	  If you say yes here you get support for Genesys Logic GL520SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl520sm.

R
Rudolf Marek 已提交
382 383
config SENSORS_CORETEMP
	tristate "Intel Core (2) Duo/Solo temperature sensor"
384
	depends on X86 && EXPERIMENTAL
R
Rudolf Marek 已提交
385 386 387 388 389
	help
	  If you say yes here you get support for the temperature
	  sensor inside your CPU. Supported all are all known variants
	  of Intel Core family.

390 391 392 393 394 395 396 397 398 399 400 401 402 403
config SENSORS_IBMAEM
	tristate "IBM Active Energy Manager temperature/power sensors and control"
	select IPMI_SI
	depends on IPMI_HANDLER
	help
	  If you say yes here you get support for the temperature and
	  power sensors and capping hardware in various IBM System X
	  servers that support Active Energy Manager.  This includes
	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
	  and certain HS2x/LS2x/QS2x blades.

	  This driver can also be built as a module.  If so, the module
	  will be called ibmaem.

404 405 406 407 408 409 410
config SENSORS_IBMPEX
	tristate "IBM PowerExecutive temperature/power sensors"
	select IPMI_SI
	depends on IPMI_HANDLER
	help
	  If you say yes here you get support for the temperature and
	  power sensors in various IBM System X servers that support
411 412 413
	  PowerExecutive.  So far this includes the x3350, x3550, x3650,
	  x3655, and x3755; the x3800, x3850, and x3950 models that have
	  PCI Express; and some of the HS2x, LS2x, and QS2x blades.
414 415 416 417

	  This driver can also be built as a module.  If so, the module
	  will be called ibmpex.

418 419
config SENSORS_IT87
	tristate "ITE IT87xx and compatibles"
420
	select HWMON_VID
421
	help
422
	  If you say yes here you get support for ITE IT8705F, IT8712F,
423 424
	  IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the
	  SiS960 clone.
425 426 427 428 429 430

	  This driver can also be built as a module.  If so, the module
	  will be called it87.

config SENSORS_LM63
	tristate "National Semiconductor LM63"
431
	depends on I2C
432 433 434 435 436 437 438 439 440
	help
	  If you say yes here you get support for the National Semiconductor
	  LM63 remote diode digital temperature sensor with integrated fan
	  control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
	  motherboard, among others.

	  This driver can also be built as a module.  If so, the module
	  will be called lm63.

441
config SENSORS_LM70
442
	tristate "National Semiconductor LM70 / Texas Instruments TMP121"
443
	depends on SPI_MASTER && EXPERIMENTAL
444 445
	help
	  If you say yes here you get support for the National Semiconductor
446 447
	  LM70 and Texas Instruments TMP121/TMP123 digital temperature
	  sensor chips.
448 449 450 451

	  This driver can also be built as a module.  If so, the module
	  will be called lm70.

452 453
config SENSORS_LM75
	tristate "National Semiconductor LM75 and compatibles"
454
	depends on I2C
455
	help
456 457 458 459 460 461 462 463 464 465 466 467
	  If you say yes here you get support for one common type of
	  temperature sensor chip, with models including:

		- Dallas Semiconductor DS75 and DS1775
		- Maxim MAX6625 and MAX6626
		- Microchip MCP980x
		- National Semiconductor LM75
		- NXP's LM75A
		- ST Microelectronics STDS75
		- TelCom (now Microchip) TCN75
		- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275

468 469 470 471 472 473
	  This driver supports driver model based binding through board
	  specific I2C device tables.

	  It also supports the "legacy" style of driver binding.  To use
	  that with some chips which don't replicate LM75 quirks exactly,
	  you may need the "force" module parameter.
474 475 476 477 478 479

	  This driver can also be built as a module.  If so, the module
	  will be called lm75.

config SENSORS_LM77
	tristate "National Semiconductor LM77"
480
	depends on I2C
481 482 483 484 485 486 487 488 489
	help
	  If you say yes here you get support for National Semiconductor LM77
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm77.

config SENSORS_LM78
	tristate "National Semiconductor LM78 and compatibles"
490
	depends on I2C
491
	select HWMON_VID
492 493 494 495 496 497 498 499 500
	help
	  If you say yes here you get support for National Semiconductor LM78,
	  LM78-J and LM79.

	  This driver can also be built as a module.  If so, the module
	  will be called lm78.

config SENSORS_LM80
	tristate "National Semiconductor LM80"
501
	depends on I2C && EXPERIMENTAL
502 503 504 505 506 507 508 509
	help
	  If you say yes here you get support for National Semiconductor
	  LM80 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm80.

config SENSORS_LM83
510
	tristate "National Semiconductor LM83 and compatibles"
511
	depends on I2C
512 513
	help
	  If you say yes here you get support for National Semiconductor
514
	  LM82 and LM83 sensor chips.
515 516 517 518 519 520

	  This driver can also be built as a module.  If so, the module
	  will be called lm83.

config SENSORS_LM85
	tristate "National Semiconductor LM85 and compatibles"
521
	depends on I2C && EXPERIMENTAL
522
	select HWMON_VID
523 524 525 526 527 528 529 530
	help
	  If you say yes here you get support for National Semiconductor LM85
	  sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.

	  This driver can also be built as a module.  If so, the module
	  will be called lm85.

config SENSORS_LM87
531
	tristate "National Semiconductor LM87 and compatibles"
532
	depends on I2C
533
	select HWMON_VID
534 535
	help
	  If you say yes here you get support for National Semiconductor LM87
536
	  and Analog Devices ADM1024 sensor chips.
537 538 539 540 541 542

	  This driver can also be built as a module.  If so, the module
	  will be called lm87.

config SENSORS_LM90
	tristate "National Semiconductor LM90 and compatibles"
543
	depends on I2C
544 545
	help
	  If you say yes here you get support for National Semiconductor LM90,
546
	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
547 548
	  MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
	  MAX6680, MAX6681 and MAX6692 sensor chips.
549 550 551 552 553 554

	  This driver can also be built as a module.  If so, the module
	  will be called lm90.

config SENSORS_LM92
	tristate "National Semiconductor LM92 and compatibles"
555
	depends on I2C
556 557 558 559 560 561 562
	help
	  If you say yes here you get support for National Semiconductor LM92
	  and Maxim MAX6635 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm92.

563 564
config SENSORS_LM93
	tristate "National Semiconductor LM93 and compatibles"
565
	depends on I2C
566 567 568 569 570 571 572 573
	select HWMON_VID
	help
	  If you say yes here you get support for National Semiconductor LM93
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm93.

I
Ira Snyder 已提交
574 575 576 577 578 579 580 581 582 583 584
config SENSORS_LTC4245
	tristate "Linear Technology LTC4245"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  If you say yes here you get support for Linear Technology LTC4245
	  Multiple Supply Hot Swap Controller I2C interface.

	  This driver can also be built as a module. If so, the module will
	  be called ltc4245.

585 586 587 588 589 590 591 592 593
config SENSORS_MAX1111
	tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
	depends on SPI_MASTER
	help
	  Say y here to support Maxim's MAX1111 ADC chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max1111.

594 595
config SENSORS_MAX1619
	tristate "Maxim MAX1619 sensor chip"
596
	depends on I2C
597 598 599 600 601 602
	help
	  If you say yes here you get support for MAX1619 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called max1619.

603 604
config SENSORS_MAX6650
	tristate "Maxim MAX6650 sensor chip"
605
	depends on I2C && EXPERIMENTAL
606 607 608 609 610 611 612
	help
	  If you say yes here you get support for the MAX6650 / MAX6651
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max6650.

613 614
config SENSORS_PC87360
	tristate "National Semiconductor PC87360 family"
615
	select HWMON_VID
616 617 618 619 620 621 622 623 624 625
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC8736x Super-I/O chips.
	  The PC87360, PC87363 and PC87364 only have fan monitoring and
	  control.  The PC87365 and PC87366 additionally have voltage and
	  temperature monitoring.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87360.

626 627
config SENSORS_PC87427
	tristate "National Semiconductor PC87427"
628
	depends on EXPERIMENTAL
629 630 631 632 633 634 635 636 637 638
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC87427 Super-I/O chip.
	  The chip has two distinct logical devices, one for fan speed
	  monitoring and control, and one for voltage and temperature
	  monitoring. Only fan speed monitoring is supported right now.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87427.

639 640 641 642 643 644 645 646 647 648 649 650 651 652
config SENSORS_PCF8591
	tristate "Philips PCF8591 ADC/DAC"
	depends on I2C
	default n
	help
	  If you say yes here you get support for Philips PCF8591 4-channel
	  ADC, 1-channel DAC chips.

	  This driver can also be built as a module.  If so, the module
	  will be called pcf8591.

	  These devices are hard to detect and rarely found on mainstream
	  hardware.  If unsure, say N.

653 654
config SENSORS_SIS5595
	tristate "Silicon Integrated Systems Corp. SiS5595"
655
	depends on PCI
656 657 658 659 660 661 662
	help
	  If you say yes here you get support for the integrated sensors in
	  SiS5595 South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called sis5595.

663
config SENSORS_DME1737
664
	tristate "SMSC DME1737, SCH311x and compatibles"
665 666 667 668
	depends on I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for the hardware monitoring
669 670
	  and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
	  Asus A8000 Super-I/O chips.
671 672 673 674

	  This driver can also be built as a module.  If so, the module
	  will be called dme1737.

675 676 677 678 679
config SENSORS_SMSC47M1
	tristate "SMSC LPC47M10x and compatibles"
	help
	  If you say yes here you get support for the integrated fan
	  monitoring and control capabilities of the SMSC LPC47B27x,
680
	  LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
681
	  LPC47M192, LPC47M292 and LPC47M997 chips.
682

683 684 685 686
	  The temperature and voltage sensor features of the LPC47M15x,
	  LPC47M192, LPC47M292 and LPC47M997 are supported by another
	  driver, select also "SMSC LPC47M192 and compatibles" below for
	  those.
687 688 689 690

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m1.

691 692
config SENSORS_SMSC47M192
	tristate "SMSC LPC47M192 and compatibles"
693
	depends on I2C && EXPERIMENTAL
694 695 696
	select HWMON_VID
	help
	  If you say yes here you get support for the temperature and
697 698
	  voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
	  and LPC47M997 chips.
699 700 701 702 703 704 705 706 707

	  The fan monitoring and control capabilities of these chips
	  are supported by another driver, select
	  "SMSC LPC47M10x and compatibles" above. You need both drivers
	  if you want fan control and voltage/temperature sensor support.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m192.

708 709
config SENSORS_SMSC47B397
	tristate "SMSC LPC47B397-NC"
710
	depends on EXPERIMENTAL
711 712 713 714 715 716 717
	help
	  If you say yes here you get support for the SMSC LPC47B397-NC
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47b397.

718 719 720 721 722 723 724 725 726 727
config SENSORS_ADS7828
	tristate "Texas Instruments ADS7828"
	depends on I2C
	help
	  If you say yes here you get support for Texas Instruments ADS7828
	  12-bit 8-channel ADC device.

	  This driver can also be built as a module.  If so, the module
	  will be called ads7828.

728 729 730 731 732 733 734 735 736 737
config SENSORS_THMC50
	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Texas Instruments THMC50
	  sensor chips and clones: the Analog Devices ADM1022.

	  This driver can also be built as a module.  If so, the module
	  will be called thmc50.

738 739
config SENSORS_VIA686A
	tristate "VIA686A"
740
	depends on PCI
741 742 743 744 745 746 747
	help
	  If you say yes here you get support for the integrated sensors in
	  Via 686A/B South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called via686a.

748 749
config SENSORS_VT1211
	tristate "VIA VT1211"
750
	depends on EXPERIMENTAL
751 752 753 754 755 756 757 758
	select HWMON_VID
	help
	  If you say yes here then you get support for hardware monitoring
	  features of the VIA VT1211 Super-I/O chip.

	  This driver can also be built as a module.  If so, the module
	  will be called vt1211.

759
config SENSORS_VT8231
760
	tristate "VIA VT8231"
761
	depends on PCI
762 763 764 765 766 767 768 769
	select HWMON_VID
	help
	  If you say yes here then you get support for the integrated sensors
	  in the VIA VT8231 device.

	  This driver can also be built as a module.  If so, the module
	  will be called vt8231.

770
config SENSORS_W83781D
771
	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
772
	depends on I2C
773
	select HWMON_VID
774 775
	help
	  If you say yes here you get support for the Winbond W8378x series
776 777
	  of sensor chips: the W83781D, W83782D and W83783S, and the similar
	  Asus AS99127F.
778 779 780 781

	  This driver can also be built as a module.  If so, the module
	  will be called w83781d.

782 783
config SENSORS_W83791D
	tristate "Winbond W83791D"
784
	depends on I2C && EXPERIMENTAL
785 786 787 788 789 790 791
	select HWMON_VID
	help
	  If you say yes here you get support for the Winbond W83791D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83791d.

792 793
config SENSORS_W83792D
	tristate "Winbond W83792D"
794
	depends on I2C && EXPERIMENTAL
795 796 797 798 799 800
	help
	  If you say yes here you get support for the Winbond W83792D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83792d.

801 802
config SENSORS_W83793
	tristate "Winbond W83793"
803
	depends on I2C && EXPERIMENTAL
804
	select HWMON_VID
805 806 807 808 809 810 811
	help
	  If you say yes here you get support for the Winbond W83793
	  hardware monitoring chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83793.

812 813
config SENSORS_W83L785TS
	tristate "Winbond W83L785TS-S"
814
	depends on I2C && EXPERIMENTAL
815 816 817 818 819 820 821 822
	help
	  If you say yes here you get support for the Winbond W83L785TS-S
	  sensor chip, which is used on the Asus A7N8X, among other
	  motherboards.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l785ts.

823 824 825 826 827 828 829 830 831 832
config SENSORS_W83L786NG
	tristate "Winbond W83L786NG, W83L786NR"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83L786NG
	  and W83L786NR sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l786ng.

833
config SENSORS_W83627HF
834
	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
835
	select HWMON_VID
836 837
	help
	  If you say yes here you get support for the Winbond W836X7 series
838 839
	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
	  W83697HF.
840 841 842 843 844

	  This driver can also be built as a module.  If so, the module
	  will be called w83627hf.

config SENSORS_W83627EHF
845
	tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
846
	select HWMON_VID
847
	help
848
	  If you say yes here you get support for the hardware
849 850
	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.

851
	  This driver also supports the W83627EHG, which is the lead-free
852 853 854
	  version of the W83627EHF, and the W83627DHG, which is a similar
	  chip suited for specific Intel processors that use PECI such as
	  the Core 2 Duo.
855

856 857
	  This driver also supports the W83667HG chip.

858 859 860
	  This driver can also be built as a module.  If so, the module
	  will be called w83627ehf.

861 862 863 864 865 866 867
config SENSORS_ULTRA45
	tristate "Sun Ultra45 PIC16F747"
	depends on SPARC64
	help
	  This driver provides support for the Ultra45 workstation environmental
	  sensors.

868 869
config SENSORS_HDAPS
	tristate "IBM Hard Drive Active Protection System (hdaps)"
870
	depends on INPUT && X86
871
	select INPUT_POLLDEV
872 873 874 875
	default n
	help
	  This driver provides support for the IBM Hard Drive Active Protection
	  System (hdaps), which provides an accelerometer and other misc. data.
876 877
	  ThinkPads starting with the R50, T41, and X40 are supported.  The
	  accelerometer data is readable via sysfs.
878

879 880
	  This driver also provides an absolute input class device, allowing
	  the laptop to act as a pinball machine-esque joystick.
881

882 883 884
	  If your ThinkPad is not recognized by the driver, please update to latest
	  BIOS. This is especially the case for some R52 ThinkPads.

885 886 887
	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of hdaps.

888 889 890
config SENSORS_LIS3LV02D
	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
	depends on ACPI && INPUT
891 892
	select NEW_LEDS
	select LEDS_CLASS
893 894 895 896 897 898 899 900 901 902 903
	default n
	help
	  This driver provides support for the LIS3LV02Dx accelerometer. In
	  particular, it can be found in a number of HP laptops, which have the
	  "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
	  systems the driver should load automatically (via ACPI). The
	  accelerometer might also be found in other systems, connected via SPI
	  or I2C.  The accelerometer data is readable via
	  /sys/devices/platform/lis3lv02d.

	  This driver also provides an absolute input class device, allowing
904 905 906
	  the laptop to act as a pinball machine-esque joystick. On HP laptops,
	  if the led infrastructure is activated, support for a led indicating
	  disk protection will be provided as hp:red:hddprotection.
907

908 909 910 911 912 913
	  This driver can also be built as modules.  If so, the core module
	  will be called lis3lv02d and a specific module for HP laptops will be
	  called hp_accel.

	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of lis3lv02d.
914

915 916
config SENSORS_APPLESMC
	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
917
	depends on INPUT && X86
918 919
	select NEW_LEDS
	select LEDS_CLASS
920
	select INPUT_POLLDEV
921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939
	default n
	help
	  This driver provides support for the Apple System Management
	  Controller, which provides an accelerometer (Apple Sudden Motion
	  Sensor), light sensors, temperature sensors, keyboard backlight
	  control and fan control.

	  Only Intel-based Apple's computers are supported (MacBook Pro,
	  MacBook, MacMini).

	  Data from the different sensors, keyboard backlight control and fan
	  control are accessible via sysfs.

	  This driver also provides an absolute input class device, allowing
	  the laptop to act as a pinball machine-esque joystick.

	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of applesmc.

940 941 942 943 944 945 946 947 948
config HWMON_DEBUG_CHIP
	bool "Hardware Monitoring Chip debugging messages"
	default n
	help
	  Say Y here if you want the I2C chip drivers to produce a bunch of
	  debug messages to the system log.  Select this if you are having
	  a problem with I2C support and want to see more of what is going
	  on.

949
endif # HWMON
新手
引导
客服 返回
顶部