setup-r8a7790.c 8.1 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
/*
 * r8a7790 processor support
 *
 * Copyright (C) 2013  Renesas Solutions Corp.
 * Copyright (C) 2013  Magnus Damm
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

21
#include <linux/clocksource.h>
22 23 24
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
25
#include <linux/platform_data/gpio-rcar.h>
26
#include <linux/platform_data/irq-renesas-irqc.h>
27 28
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
29 30 31 32 33
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>

34
static const struct resource pfc_resources[] __initconst = {
M
Magnus Damm 已提交
35 36 37
	DEFINE_RES_MEM(0xe6060000, 0x250),
};

38
#define R8A7790_GPIO(idx)						\
39
static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
40 41 42 43
	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
};									\
									\
44 45
static const struct gpio_rcar_config					\
r8a7790_gpio##idx##_platform_data __initconst = {			\
46 47 48 49
	.gpio_base	= 32 * (idx),					\
	.irq_base	= 0,						\
	.number_of_pins	= 32,						\
	.pctl_name	= "pfc-r8a7790",				\
50
	.has_both_edge_trigger = 1,					\
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66
};									\

R8A7790_GPIO(0);
R8A7790_GPIO(1);
R8A7790_GPIO(2);
R8A7790_GPIO(3);
R8A7790_GPIO(4);
R8A7790_GPIO(5);

#define r8a7790_register_gpio(idx)					\
	platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \
		r8a7790_gpio##idx##_resources,				\
		ARRAY_SIZE(r8a7790_gpio##idx##_resources),		\
		&r8a7790_gpio##idx##_platform_data,			\
		sizeof(r8a7790_gpio##idx##_platform_data))

M
Magnus Damm 已提交
67 68 69 70
void __init r8a7790_pinmux_init(void)
{
	platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
					ARRAY_SIZE(pfc_resources));
71 72 73 74 75 76
	r8a7790_register_gpio(0);
	r8a7790_register_gpio(1);
	r8a7790_register_gpio(2);
	r8a7790_register_gpio(3);
	r8a7790_register_gpio(4);
	r8a7790_register_gpio(5);
M
Magnus Damm 已提交
77 78
}

79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102
#define SCIF_COMMON(scif_type, baseaddr, irq)			\
	.type		= scif_type,				\
	.mapbase	= baseaddr,				\
	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
	.irqs		= SCIx_IRQ_MUXED(irq)

#define SCIFA_DATA(index, baseaddr, irq)		\
[index] = {						\
	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
	.scbrr_algo_id	= SCBRR_ALGO_4,			\
	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0,	\
}

#define SCIFB_DATA(index, baseaddr, irq)	\
[index] = {					\
	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
	.scbrr_algo_id	= SCBRR_ALGO_4,		\
	.scscr = SCSCR_RE | SCSCR_TE,		\
}

#define SCIF_DATA(index, baseaddr, irq)		\
[index] = {						\
	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
	.scbrr_algo_id	= SCBRR_ALGO_2,			\
103
	.scscr = SCSCR_RE | SCSCR_TE,	\
104 105
}

106 107 108 109 110 111 112 113 114
#define HSCIF_DATA(index, baseaddr, irq)		\
[index] = {						\
	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
	.scbrr_algo_id	= SCBRR_ALGO_6,			\
	.scscr = SCSCR_RE | SCSCR_TE,	\
}

enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
       HSCIF0, HSCIF1 };
115

116
static const struct plat_sci_port scif[] __initconst = {
117 118 119 120 121 122 123 124
	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
125 126
	HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
	HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
127 128 129 130 131 132 133 134
};

static inline void r8a7790_register_scif(int idx)
{
	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
				      sizeof(struct plat_sci_port));
}

135
static const struct renesas_irqc_config irqc0_data __initconst = {
136 137 138
	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
};

139
static const struct resource irqc0_resources[] __initconst = {
140 141 142 143 144 145 146 147 148 149 150 151 152 153
	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
};

#define r8a7790_register_irqc(idx)					\
	platform_device_register_resndata(&platform_bus, "renesas_irqc", \
					  idx, irqc##idx##_resources,	\
					  ARRAY_SIZE(irqc##idx##_resources), \
					  &irqc##idx##_data,		\
					  sizeof(struct renesas_irqc_config))

154
static const struct resource thermal_resources[] __initconst = {
155 156 157 158 159 160 161 162 163 164
	DEFINE_RES_MEM(0xe61f0000, 0x14),
	DEFINE_RES_MEM(0xe61f0100, 0x38),
	DEFINE_RES_IRQ(gic_spi(69)),
};

#define r8a7790_register_thermal()					\
	platform_device_register_simple("rcar_thermal", -1,		\
					thermal_resources,		\
					ARRAY_SIZE(thermal_resources))

165
static const struct sh_timer_config cmt00_platform_data __initconst = {
166 167 168 169 170
	.name = "CMT00",
	.timer_bit = 0,
	.clockevent_rating = 80,
};

171
static const struct resource cmt00_resources[] __initconst = {
172 173 174 175 176 177 178 179 180 181 182 183
	DEFINE_RES_MEM(0xffca0510, 0x0c),
	DEFINE_RES_MEM(0xffca0500, 0x04),
	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
};

#define r8a7790_register_cmt(idx)					\
	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
					  idx, cmt##idx##_resources,	\
					  ARRAY_SIZE(cmt##idx##_resources), \
					  &cmt##idx##_platform_data,	\
					  sizeof(struct sh_timer_config))

184
void __init r8a7790_add_dt_devices(void)
185
{
186 187 188 189 190 191 192 193
	r8a7790_register_scif(SCIFA0);
	r8a7790_register_scif(SCIFA1);
	r8a7790_register_scif(SCIFB0);
	r8a7790_register_scif(SCIFB1);
	r8a7790_register_scif(SCIFB2);
	r8a7790_register_scif(SCIFA2);
	r8a7790_register_scif(SCIF0);
	r8a7790_register_scif(SCIF1);
194 195
	r8a7790_register_scif(HSCIF0);
	r8a7790_register_scif(HSCIF1);
196 197 198 199 200 201
	r8a7790_register_cmt(00);
}

void __init r8a7790_add_standard_devices(void)
{
	r8a7790_add_dt_devices();
202
	r8a7790_register_irqc(0);
203
	r8a7790_register_thermal();
204 205
}

206 207 208 209 210 211 212 213 214 215 216 217 218 219
#define MODEMR 0xe6160060

u32 __init r8a7790_read_mode_pins(void)
{
	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
	u32 mode;

	BUG_ON(!modemr);
	mode = ioread32(modemr);
	iounmap(modemr);

	return mode;
}

220 221 222
#define CNTCR 0
#define CNTFID0 0x20

223 224
void __init r8a7790_timer_init(void)
{
225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266
#ifdef CONFIG_ARM_ARCH_TIMER
	u32 mode = r8a7790_read_mode_pins();
	void __iomem *base;
	int extal_mhz = 0;
	u32 freq;

	/* At Linux boot time the r8a7790 arch timer comes up
	 * with the counter disabled. Moreover, it may also report
	 * a potentially incorrect fixed 13 MHz frequency. To be
	 * correct these registers need to be updated to use the
	 * frequency EXTAL / 2 which can be determined by the MD pins.
	 */

	switch (mode & (MD(14) | MD(13))) {
	case 0:
		extal_mhz = 15;
		break;
	case MD(13):
		extal_mhz = 20;
		break;
	case MD(14):
		extal_mhz = 26;
		break;
	case MD(13) | MD(14):
		extal_mhz = 30;
		break;
	}

	/* The arch timer frequency equals EXTAL / 2 */
	freq = extal_mhz * (1000000 / 2);

	/* Remap "armgcnt address map" space */
	base = ioremap(0xe6080000, PAGE_SIZE);

	/* Update registers with correct frequency */
	iowrite32(freq, base + CNTFID0);
	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));

	/* make sure arch timer is started by setting bit 0 of CNTCR */
	iowrite32(1, base + CNTCR);
	iounmap(base);
#endif /* CONFIG_ARM_ARCH_TIMER */
267

268
	clocksource_of_init();
269 270
}

271
void __init r8a7790_init_early(void)
272 273 274 275 276 277
{
#ifndef CONFIG_ARM_ARCH_TIMER
	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
#endif
}

278 279
#ifdef CONFIG_USE_OF

280
static const char * const r8a7790_boards_compat_dt[] __initconst = {
281 282 283 284 285
	"renesas,r8a7790",
	NULL,
};

DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
286
	.init_early	= r8a7790_init_early,
287
	.init_time	= r8a7790_timer_init,
288 289 290
	.dt_compat	= r8a7790_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */