max8997.c 33.2 KB
Newer Older
M
MyungJoo Ham 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
/*
 * max8997.c - Regulator driver for the Maxim 8997/8966
 *
 * Copyright (C) 2011 Samsung Electronics
 * MyungJoo Ham <myungjoo.ham@smasung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 * This driver is based on max8998.c
 */

#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
27
#include <linux/of_gpio.h>
M
MyungJoo Ham 已提交
28
#include <linux/slab.h>
29
#include <linux/module.h>
M
MyungJoo Ham 已提交
30 31 32 33 34
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/max8997.h>
#include <linux/mfd/max8997-private.h>
35
#include <linux/regulator/of_regulator.h>
M
MyungJoo Ham 已提交
36 37 38 39 40 41 42 43

struct max8997_data {
	struct device *dev;
	struct max8997_dev *iodev;
	int num_regulators;
	struct regulator_dev **rdev;
	int ramp_delay; /* in mV/us */

44 45 46
	bool buck1_gpiodvs;
	bool buck2_gpiodvs;
	bool buck5_gpiodvs;
M
MyungJoo Ham 已提交
47 48 49
	u8 buck1_vol[8];
	u8 buck2_vol[8];
	u8 buck5_vol[8];
50
	int buck125_gpios[3];
M
MyungJoo Ham 已提交
51
	int buck125_gpioindex;
52
	bool ignore_gpiodvs_side_effect;
M
MyungJoo Ham 已提交
53 54 55 56 57 58 59 60 61 62

	u8 saved_states[MAX8997_REG_MAX];
};

static inline void max8997_set_gpio(struct max8997_data *max8997)
{
	int set3 = (max8997->buck125_gpioindex) & 0x1;
	int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1;
	int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1;

63 64 65
	gpio_set_value(max8997->buck125_gpios[0], set1);
	gpio_set_value(max8997->buck125_gpios[1], set2);
	gpio_set_value(max8997->buck125_gpios[2], set3);
M
MyungJoo Ham 已提交
66 67 68 69 70 71 72 73
}

struct voltage_map_desc {
	int min;
	int max;
	int step;
};

74
/* Voltage maps in uV */
M
MyungJoo Ham 已提交
75
static const struct voltage_map_desc ldo_voltage_map_desc = {
76
	.min = 800000,	.max = 3950000,	.step = 50000,
M
MyungJoo Ham 已提交
77 78 79
}; /* LDO1 ~ 18, 21 all */

static const struct voltage_map_desc buck1245_voltage_map_desc = {
80
	.min = 650000,	.max = 2225000,	.step = 25000,
M
MyungJoo Ham 已提交
81 82 83
}; /* Buck1, 2, 4, 5 */

static const struct voltage_map_desc buck37_voltage_map_desc = {
84
	.min = 750000,	.max = 3900000,	.step = 50000,
M
MyungJoo Ham 已提交
85 86
}; /* Buck3, 7 */

87
/* current map in uA */
M
MyungJoo Ham 已提交
88
static const struct voltage_map_desc charger_current_map_desc = {
89
	.min = 200000,	.max = 950000,	.step = 50000,
M
MyungJoo Ham 已提交
90 91 92
};

static const struct voltage_map_desc topoff_current_map_desc = {
93
	.min = 50000,	.max = 200000,	.step = 10000,
M
MyungJoo Ham 已提交
94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135
};

static const struct voltage_map_desc *reg_voltage_map[] = {
	[MAX8997_LDO1] = &ldo_voltage_map_desc,
	[MAX8997_LDO2] = &ldo_voltage_map_desc,
	[MAX8997_LDO3] = &ldo_voltage_map_desc,
	[MAX8997_LDO4] = &ldo_voltage_map_desc,
	[MAX8997_LDO5] = &ldo_voltage_map_desc,
	[MAX8997_LDO6] = &ldo_voltage_map_desc,
	[MAX8997_LDO7] = &ldo_voltage_map_desc,
	[MAX8997_LDO8] = &ldo_voltage_map_desc,
	[MAX8997_LDO9] = &ldo_voltage_map_desc,
	[MAX8997_LDO10] = &ldo_voltage_map_desc,
	[MAX8997_LDO11] = &ldo_voltage_map_desc,
	[MAX8997_LDO12] = &ldo_voltage_map_desc,
	[MAX8997_LDO13] = &ldo_voltage_map_desc,
	[MAX8997_LDO14] = &ldo_voltage_map_desc,
	[MAX8997_LDO15] = &ldo_voltage_map_desc,
	[MAX8997_LDO16] = &ldo_voltage_map_desc,
	[MAX8997_LDO17] = &ldo_voltage_map_desc,
	[MAX8997_LDO18] = &ldo_voltage_map_desc,
	[MAX8997_LDO21] = &ldo_voltage_map_desc,
	[MAX8997_BUCK1] = &buck1245_voltage_map_desc,
	[MAX8997_BUCK2] = &buck1245_voltage_map_desc,
	[MAX8997_BUCK3] = &buck37_voltage_map_desc,
	[MAX8997_BUCK4] = &buck1245_voltage_map_desc,
	[MAX8997_BUCK5] = &buck1245_voltage_map_desc,
	[MAX8997_BUCK6] = NULL,
	[MAX8997_BUCK7] = &buck37_voltage_map_desc,
	[MAX8997_EN32KHZ_AP] = NULL,
	[MAX8997_EN32KHZ_CP] = NULL,
	[MAX8997_ENVICHG] = NULL,
	[MAX8997_ESAFEOUT1] = NULL,
	[MAX8997_ESAFEOUT2] = NULL,
	[MAX8997_CHARGER_CV] = NULL,
	[MAX8997_CHARGER] = &charger_current_map_desc,
	[MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc,
};

static int max8997_list_voltage_safeout(struct regulator_dev *rdev,
		unsigned int selector)
{
136
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158

	if (rid == MAX8997_ESAFEOUT1 || rid == MAX8997_ESAFEOUT2) {
		switch (selector) {
		case 0:
			return 4850000;
		case 1:
			return 4900000;
		case 2:
			return 4950000;
		case 3:
			return 3300000;
		default:
			return -EINVAL;
		}
	}

	return -EINVAL;
}

static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev,
		unsigned int selector)
{
159
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181

	if (rid != MAX8997_CHARGER_CV)
		goto err;

	switch (selector) {
	case 0x00:
		return 4200000;
	case 0x01 ... 0x0E:
		return 4000000 + 20000 * (selector - 0x01);
	case 0x0F:
		return 4350000;
	default:
		return -EINVAL;
	}
err:
	return -EINVAL;
}

static int max8997_list_voltage(struct regulator_dev *rdev,
		unsigned int selector)
{
	const struct voltage_map_desc *desc;
182
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
183 184 185 186 187 188 189 190 191 192 193 194 195 196
	int val;

	if (rid >= ARRAY_SIZE(reg_voltage_map) ||
			rid < 0)
		return -EINVAL;

	desc = reg_voltage_map[rid];
	if (desc == NULL)
		return -EINVAL;

	val = desc->min + desc->step * selector;
	if (val > desc->max)
		return -EINVAL;

197
	return val;
M
MyungJoo Ham 已提交
198 199 200 201 202
}

static int max8997_get_enable_register(struct regulator_dev *rdev,
		int *reg, int *mask, int *pattern)
{
203
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281

	switch (rid) {
	case MAX8997_LDO1 ... MAX8997_LDO21:
		*reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1);
		*mask = 0xC0;
		*pattern = 0xC0;
		break;
	case MAX8997_BUCK1:
		*reg = MAX8997_REG_BUCK1CTRL;
		*mask = 0x01;
		*pattern = 0x01;
		break;
	case MAX8997_BUCK2:
		*reg = MAX8997_REG_BUCK2CTRL;
		*mask = 0x01;
		*pattern = 0x01;
		break;
	case MAX8997_BUCK3:
		*reg = MAX8997_REG_BUCK3CTRL;
		*mask = 0x01;
		*pattern = 0x01;
		break;
	case MAX8997_BUCK4:
		*reg = MAX8997_REG_BUCK4CTRL;
		*mask = 0x01;
		*pattern = 0x01;
		break;
	case MAX8997_BUCK5:
		*reg = MAX8997_REG_BUCK5CTRL;
		*mask = 0x01;
		*pattern = 0x01;
		break;
	case MAX8997_BUCK6:
		*reg = MAX8997_REG_BUCK6CTRL;
		*mask = 0x01;
		*pattern = 0x01;
		break;
	case MAX8997_BUCK7:
		*reg = MAX8997_REG_BUCK7CTRL;
		*mask = 0x01;
		*pattern = 0x01;
		break;
	case MAX8997_EN32KHZ_AP ... MAX8997_EN32KHZ_CP:
		*reg = MAX8997_REG_MAINCON1;
		*mask = 0x01 << (rid - MAX8997_EN32KHZ_AP);
		*pattern = 0x01 << (rid - MAX8997_EN32KHZ_AP);
		break;
	case MAX8997_ENVICHG:
		*reg = MAX8997_REG_MBCCTRL1;
		*mask = 0x80;
		*pattern = 0x80;
		break;
	case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2:
		*reg = MAX8997_REG_SAFEOUTCTRL;
		*mask = 0x40 << (rid - MAX8997_ESAFEOUT1);
		*pattern = 0x40 << (rid - MAX8997_ESAFEOUT1);
		break;
	case MAX8997_CHARGER:
		*reg = MAX8997_REG_MBCCTRL2;
		*mask = 0x40;
		*pattern = 0x40;
		break;
	default:
		/* Not controllable or not exists */
		return -EINVAL;
	}

	return 0;
}

static int max8997_reg_is_enabled(struct regulator_dev *rdev)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
	struct i2c_client *i2c = max8997->iodev->i2c;
	int ret, reg, mask, pattern;
	u8 val;

	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
282
	if (ret)
M
MyungJoo Ham 已提交
283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320
		return ret;

	ret = max8997_read_reg(i2c, reg, &val);
	if (ret)
		return ret;

	return (val & mask) == pattern;
}

static int max8997_reg_enable(struct regulator_dev *rdev)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
	struct i2c_client *i2c = max8997->iodev->i2c;
	int ret, reg, mask, pattern;

	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
	if (ret)
		return ret;

	return max8997_update_reg(i2c, reg, pattern, mask);
}

static int max8997_reg_disable(struct regulator_dev *rdev)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
	struct i2c_client *i2c = max8997->iodev->i2c;
	int ret, reg, mask, pattern;

	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
	if (ret)
		return ret;

	return max8997_update_reg(i2c, reg, ~pattern, mask);
}

static int max8997_get_voltage_register(struct regulator_dev *rdev,
		int *_reg, int *_shift, int *_mask)
{
321
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
322
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
323 324 325 326 327 328 329 330
	int reg, shift = 0, mask = 0x3f;

	switch (rid) {
	case MAX8997_LDO1 ... MAX8997_LDO21:
		reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1);
		break;
	case MAX8997_BUCK1:
		reg = MAX8997_REG_BUCK1DVS1;
331 332
		if (max8997->buck1_gpiodvs)
			reg += max8997->buck125_gpioindex;
M
MyungJoo Ham 已提交
333 334 335
		break;
	case MAX8997_BUCK2:
		reg = MAX8997_REG_BUCK2DVS1;
336 337
		if (max8997->buck2_gpiodvs)
			reg += max8997->buck125_gpioindex;
M
MyungJoo Ham 已提交
338 339 340 341 342 343 344 345 346
		break;
	case MAX8997_BUCK3:
		reg = MAX8997_REG_BUCK3DVS;
		break;
	case MAX8997_BUCK4:
		reg = MAX8997_REG_BUCK4DVS;
		break;
	case MAX8997_BUCK5:
		reg = MAX8997_REG_BUCK5DVS1;
347 348
		if (max8997->buck5_gpiodvs)
			reg += max8997->buck125_gpioindex;
M
MyungJoo Ham 已提交
349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383
		break;
	case MAX8997_BUCK7:
		reg = MAX8997_REG_BUCK7DVS;
		break;
	case MAX8997_ESAFEOUT1 ...  MAX8997_ESAFEOUT2:
		reg = MAX8997_REG_SAFEOUTCTRL;
		shift = (rid == MAX8997_ESAFEOUT2) ? 2 : 0;
		mask = 0x3;
		break;
	case MAX8997_CHARGER_CV:
		reg = MAX8997_REG_MBCCTRL3;
		shift = 0;
		mask = 0xf;
		break;
	case MAX8997_CHARGER:
		reg = MAX8997_REG_MBCCTRL4;
		shift = 0;
		mask = 0xf;
		break;
	case MAX8997_CHARGER_TOPOFF:
		reg = MAX8997_REG_MBCCTRL5;
		shift = 0;
		mask = 0xf;
		break;
	default:
		return -EINVAL;
	}

	*_reg = reg;
	*_shift = shift;
	*_mask = mask;

	return 0;
}

384
static int max8997_get_voltage_sel(struct regulator_dev *rdev)
M
MyungJoo Ham 已提交
385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
	struct i2c_client *i2c = max8997->iodev->i2c;
	int reg, shift, mask, ret;
	u8 val;

	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
	if (ret)
		return ret;

	ret = max8997_read_reg(i2c, reg, &val);
	if (ret)
		return ret;

	val >>= shift;
	val &= mask;

402
	return val;
M
MyungJoo Ham 已提交
403 404 405 406 407 408
}

static inline int max8997_get_voltage_proper_val(
		const struct voltage_map_desc *desc,
		int min_vol, int max_vol)
{
409
	int i;
M
MyungJoo Ham 已提交
410 411 412 413 414 415 416

	if (desc == NULL)
		return -EINVAL;

	if (max_vol < desc->min || min_vol > desc->max)
		return -EINVAL;

417 418
	if (min_vol < desc->min)
		min_vol = desc->min;
M
MyungJoo Ham 已提交
419

420
	i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
M
MyungJoo Ham 已提交
421 422 423 424 425 426 427 428 429 430 431 432

	if (desc->min + desc->step * i > max_vol)
		return -EINVAL;

	return i;
}

static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
		int min_uV, int max_uV, unsigned *selector)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
	struct i2c_client *i2c = max8997->iodev->i2c;
433
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488
	int lb, ub;
	int reg, shift = 0, mask, ret = 0;
	u8 val = 0x0;

	if (rid != MAX8997_CHARGER_CV)
		return -EINVAL;

	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
	if (ret)
		return ret;

	if (max_uV < 4000000 || min_uV > 4350000)
		return -EINVAL;

	if (min_uV <= 4000000) {
		if (max_uV >= 4000000)
			return -EINVAL;
		else
			val = 0x1;
	} else if (min_uV <= 4200000 && max_uV >= 4200000)
		val = 0x0;
	else {
		lb = (min_uV - 4000001) / 20000 + 2;
		ub = (max_uV - 4000000) / 20000 + 1;

		if (lb > ub)
			return -EINVAL;

		if (lb < 0xf)
			val = lb;
		else {
			if (ub >= 0xf)
				val = 0xf;
			else
				return -EINVAL;
		}
	}

	*selector = val;

	ret = max8997_update_reg(i2c, reg, val << shift, mask);

	return ret;
}

/*
 * For LDO1 ~ LDO21, BUCK1~5, BUCK7, CHARGER, CHARGER_TOPOFF
 * BUCK1, 2, and 5 are available if they are not controlled by gpio
 */
static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
		int min_uV, int max_uV, unsigned *selector)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
	struct i2c_client *i2c = max8997->iodev->i2c;
	const struct voltage_map_desc *desc;
489
	int rid = rdev_get_id(rdev);
490
	int i, reg, shift, mask, ret;
M
MyungJoo Ham 已提交
491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510

	switch (rid) {
	case MAX8997_LDO1 ... MAX8997_LDO21:
		break;
	case MAX8997_BUCK1 ... MAX8997_BUCK5:
		break;
	case MAX8997_BUCK6:
		return -EINVAL;
	case MAX8997_BUCK7:
		break;
	case MAX8997_CHARGER:
		break;
	case MAX8997_CHARGER_TOPOFF:
		break;
	default:
		return -EINVAL;
	}

	desc = reg_voltage_map[rid];

511
	i = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
M
MyungJoo Ham 已提交
512 513 514 515 516 517 518 519 520 521
	if (i < 0)
		return i;

	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
	if (ret)
		return ret;

	ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
	*selector = i;

522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550
	return ret;
}

static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
						unsigned int old_selector,
						unsigned int new_selector)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
	int rid = rdev_get_id(rdev);
	const struct voltage_map_desc *desc = reg_voltage_map[rid];

	/* Delay is required only if the voltage is increasing */
	if (old_selector >= new_selector)
		return 0;

	/* No need to delay if gpio_dvs_mode */
	switch (rid) {
	case MAX8997_BUCK1:
		if (max8997->buck1_gpiodvs)
			return 0;
		break;
	case MAX8997_BUCK2:
		if (max8997->buck2_gpiodvs)
			return 0;
		break;
	case MAX8997_BUCK5:
		if (max8997->buck5_gpiodvs)
			return 0;
		break;
M
MyungJoo Ham 已提交
551 552
	}

553 554 555 556 557 558
	switch (rid) {
	case MAX8997_BUCK1:
	case MAX8997_BUCK2:
	case MAX8997_BUCK4:
	case MAX8997_BUCK5:
		return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
559
				    max8997->ramp_delay * 1000);
M
MyungJoo Ham 已提交
560 561
	}

562
	return 0;
M
MyungJoo Ham 已提交
563 564 565 566 567 568 569 570 571 572 573 574 575 576
}

/*
 * Assess the damage on the voltage setting of BUCK1,2,5 by the change.
 *
 * When GPIO-DVS mode is used for multiple bucks, changing the voltage value
 * of one of the bucks may affect that of another buck, which is the side
 * effect of the change (set_voltage). This function examines the GPIO-DVS
 * configurations and checks whether such side-effect exists.
 */
static int max8997_assess_side_effect(struct regulator_dev *rdev,
		u8 new_val, int *best)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
577
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602
	u8 *buckx_val[3];
	bool buckx_gpiodvs[3];
	int side_effect[8];
	int min_side_effect = INT_MAX;
	int i;

	*best = -1;

	switch (rid) {
	case MAX8997_BUCK1:
		rid = 0;
		break;
	case MAX8997_BUCK2:
		rid = 1;
		break;
	case MAX8997_BUCK5:
		rid = 2;
		break;
	default:
		return -EINVAL;
	}

	buckx_val[0] = max8997->buck1_vol;
	buckx_val[1] = max8997->buck2_vol;
	buckx_val[2] = max8997->buck5_vol;
603 604 605
	buckx_gpiodvs[0] = max8997->buck1_gpiodvs;
	buckx_gpiodvs[1] = max8997->buck2_gpiodvs;
	buckx_gpiodvs[2] = max8997->buck5_gpiodvs;
M
MyungJoo Ham 已提交
606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653

	for (i = 0; i < 8; i++) {
		int others;

		if (new_val != (buckx_val[rid])[i]) {
			side_effect[i] = -1;
			continue;
		}

		side_effect[i] = 0;
		for (others = 0; others < 3; others++) {
			int diff;

			if (others == rid)
				continue;
			if (buckx_gpiodvs[others] == false)
				continue; /* Not affected */
			diff = (buckx_val[others])[i] -
				(buckx_val[others])[max8997->buck125_gpioindex];
			if (diff > 0)
				side_effect[i] += diff;
			else if (diff < 0)
				side_effect[i] -= diff;
		}
		if (side_effect[i] == 0) {
			*best = i;
			return 0; /* NO SIDE EFFECT! Use This! */
		}
		if (side_effect[i] < min_side_effect) {
			min_side_effect = side_effect[i];
			*best = i;
		}
	}

	if (*best == -1)
		return -EINVAL;

	return side_effect[*best];
}

/*
 * For Buck 1 ~ 5 and 7. If it is not controlled by GPIO, this calls
 * max8997_set_voltage_ldobuck to do the job.
 */
static int max8997_set_voltage_buck(struct regulator_dev *rdev,
		int min_uV, int max_uV, unsigned *selector)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
654
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
655 656 657 658 659 660 661 662 663
	const struct voltage_map_desc *desc;
	int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
	bool gpio_dvs_mode = false;

	if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
		return -EINVAL;

	switch (rid) {
	case MAX8997_BUCK1:
664
		if (max8997->buck1_gpiodvs)
M
MyungJoo Ham 已提交
665 666 667
			gpio_dvs_mode = true;
		break;
	case MAX8997_BUCK2:
668
		if (max8997->buck2_gpiodvs)
M
MyungJoo Ham 已提交
669 670 671
			gpio_dvs_mode = true;
		break;
	case MAX8997_BUCK5:
672
		if (max8997->buck5_gpiodvs)
M
MyungJoo Ham 已提交
673 674 675 676 677 678 679 680 681
			gpio_dvs_mode = true;
		break;
	}

	if (!gpio_dvs_mode)
		return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV,
						selector);

	desc = reg_voltage_map[rid];
682
	new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
M
MyungJoo Ham 已提交
683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700
	if (new_val < 0)
		return new_val;

	tmp_dmg = INT_MAX;
	tmp_idx = -1;
	tmp_val = -1;
	do {
		damage = max8997_assess_side_effect(rdev, new_val, &new_idx);
		if (damage == 0)
			goto out;

		if (tmp_dmg > damage) {
			tmp_idx = new_idx;
			tmp_val = new_val;
			tmp_dmg = damage;
		}

		new_val++;
701
	} while (desc->min + desc->step * new_val <= desc->max);
M
MyungJoo Ham 已提交
702 703 704 705

	new_idx = tmp_idx;
	new_val = tmp_val;

706
	if (max8997->ignore_gpiodvs_side_effect == false)
M
MyungJoo Ham 已提交
707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735
		return -EINVAL;

	dev_warn(&rdev->dev, "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:"
			" %d -> %d\n", max8997->buck125_gpioindex, tmp_idx);

out:
	if (new_idx < 0 || new_val < 0)
		return -EINVAL;

	max8997->buck125_gpioindex = new_idx;
	max8997_set_gpio(max8997);
	*selector = new_val;

	return 0;
}

static const int safeoutvolt[] = {
	3300000,
	4850000,
	4900000,
	4950000,
};

/* For SAFEOUT1 and SAFEOUT2 */
static int max8997_set_voltage_safeout(struct regulator_dev *rdev,
		int min_uV, int max_uV, unsigned *selector)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
	struct i2c_client *i2c = max8997->iodev->i2c;
736
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772
	int reg, shift = 0, mask, ret;
	int i = 0;
	u8 val;

	if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2)
		return -EINVAL;

	for (i = 0; i < ARRAY_SIZE(safeoutvolt); i++) {
		if (min_uV <= safeoutvolt[i] &&
				max_uV >= safeoutvolt[i])
			break;
	}

	if (i >= ARRAY_SIZE(safeoutvolt))
		return -EINVAL;

	if (i == 0)
		val = 0x3;
	else
		val = i - 1;

	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
	if (ret)
		return ret;

	ret = max8997_update_reg(i2c, reg, val << shift, mask << shift);
	*selector = val;

	return ret;
}

static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
{
	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
	struct i2c_client *i2c = max8997->iodev->i2c;
	int ret, reg, mask, pattern;
773
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799

	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
	if (ret)
		return ret;

	max8997_read_reg(i2c, reg, &max8997->saved_states[rid]);

	if (rid == MAX8997_LDO1 ||
			rid == MAX8997_LDO10 ||
			rid == MAX8997_LDO21) {
		dev_dbg(&rdev->dev, "Conditional Power-Off for %s\n",
				rdev->desc->name);
		return max8997_update_reg(i2c, reg, 0x40, mask);
	}

	dev_dbg(&rdev->dev, "Full Power-Off for %s (%xh -> %xh)\n",
			rdev->desc->name, max8997->saved_states[rid] & mask,
			(~pattern) & mask);
	return max8997_update_reg(i2c, reg, ~pattern, mask);
}

static struct regulator_ops max8997_ldo_ops = {
	.list_voltage		= max8997_list_voltage,
	.is_enabled		= max8997_reg_is_enabled,
	.enable			= max8997_reg_enable,
	.disable		= max8997_reg_disable,
800
	.get_voltage_sel	= max8997_get_voltage_sel,
M
MyungJoo Ham 已提交
801
	.set_voltage		= max8997_set_voltage_ldobuck,
802
	.set_voltage_time_sel	= max8997_set_voltage_ldobuck_time_sel,
M
MyungJoo Ham 已提交
803 804 805 806 807 808 809 810
	.set_suspend_disable	= max8997_reg_disable_suspend,
};

static struct regulator_ops max8997_buck_ops = {
	.list_voltage		= max8997_list_voltage,
	.is_enabled		= max8997_reg_is_enabled,
	.enable			= max8997_reg_enable,
	.disable		= max8997_reg_disable,
811
	.get_voltage_sel	= max8997_get_voltage_sel,
M
MyungJoo Ham 已提交
812
	.set_voltage		= max8997_set_voltage_buck,
813
	.set_voltage_time_sel	= max8997_set_voltage_ldobuck_time_sel,
M
MyungJoo Ham 已提交
814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829
	.set_suspend_disable	= max8997_reg_disable_suspend,
};

static struct regulator_ops max8997_fixedvolt_ops = {
	.list_voltage		= max8997_list_voltage,
	.is_enabled		= max8997_reg_is_enabled,
	.enable			= max8997_reg_enable,
	.disable		= max8997_reg_disable,
	.set_suspend_disable	= max8997_reg_disable_suspend,
};

static struct regulator_ops max8997_safeout_ops = {
	.list_voltage		= max8997_list_voltage_safeout,
	.is_enabled		= max8997_reg_is_enabled,
	.enable			= max8997_reg_enable,
	.disable		= max8997_reg_disable,
830
	.get_voltage_sel	= max8997_get_voltage_sel,
M
MyungJoo Ham 已提交
831 832 833 834 835 836
	.set_voltage		= max8997_set_voltage_safeout,
	.set_suspend_disable	= max8997_reg_disable_suspend,
};

static struct regulator_ops max8997_fixedstate_ops = {
	.list_voltage		= max8997_list_voltage_charger_cv,
837
	.get_voltage_sel	= max8997_get_voltage_sel,
M
MyungJoo Ham 已提交
838 839 840
	.set_voltage		= max8997_set_voltage_charger_cv,
};

841 842
static int max8997_set_current_limit(struct regulator_dev *rdev,
				     int min_uA, int max_uA)
M
MyungJoo Ham 已提交
843 844
{
	unsigned dummy;
845
	int rid = rdev_get_id(rdev);
M
MyungJoo Ham 已提交
846

847 848
	if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
		return -EINVAL;
M
MyungJoo Ham 已提交
849

850 851
	/* Reuse max8997_set_voltage_ldobuck to set current_limit. */
	return max8997_set_voltage_ldobuck(rdev, min_uA, max_uA, &dummy);
M
MyungJoo Ham 已提交
852 853
}

854 855 856 857 858 859 860 861 862 863 864 865 866 867
static int max8997_get_current_limit(struct regulator_dev *rdev)
{
	int sel, rid = rdev_get_id(rdev);

	if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
		return -EINVAL;

	sel = max8997_get_voltage_sel(rdev);
	if (sel < 0)
		return sel;

	/* Reuse max8997_list_voltage to get current_limit. */
	return max8997_list_voltage(rdev, sel);
}
M
MyungJoo Ham 已提交
868 869 870 871 872

static struct regulator_ops max8997_charger_ops = {
	.is_enabled		= max8997_reg_is_enabled,
	.enable			= max8997_reg_enable,
	.disable		= max8997_reg_disable,
873 874
	.get_current_limit	= max8997_get_current_limit,
	.set_current_limit	= max8997_set_current_limit,
M
MyungJoo Ham 已提交
875 876 877
};

static struct regulator_ops max8997_charger_fixedstate_ops = {
878 879
	.get_current_limit	= max8997_get_current_limit,
	.set_current_limit	= max8997_set_current_limit,
M
MyungJoo Ham 已提交
880 881
};

882 883 884 885
#define MAX8997_VOLTAGE_REGULATOR(_name, _ops) {\
	.name		= #_name,		\
	.id		= MAX8997_##_name,	\
	.ops		= &_ops,		\
M
MyungJoo Ham 已提交
886 887 888
	.type		= REGULATOR_VOLTAGE,	\
	.owner		= THIS_MODULE,		\
}
889 890 891 892 893 894

#define MAX8997_CURRENT_REGULATOR(_name, _ops) {\
	.name		= #_name,		\
	.id		= MAX8997_##_name,	\
	.ops		= &_ops,		\
	.type		= REGULATOR_CURRENT,	\
M
MyungJoo Ham 已提交
895 896 897 898
	.owner		= THIS_MODULE,		\
}

static struct regulator_desc regulators[] = {
899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933
	MAX8997_VOLTAGE_REGULATOR(LDO1, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO2, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO3, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO4, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO5, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO6, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO7, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO8, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO9, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO10, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO11, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO12, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO13, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO14, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO15, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO16, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO17, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO18, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(LDO21, max8997_ldo_ops),
	MAX8997_VOLTAGE_REGULATOR(BUCK1, max8997_buck_ops),
	MAX8997_VOLTAGE_REGULATOR(BUCK2, max8997_buck_ops),
	MAX8997_VOLTAGE_REGULATOR(BUCK3, max8997_buck_ops),
	MAX8997_VOLTAGE_REGULATOR(BUCK4, max8997_buck_ops),
	MAX8997_VOLTAGE_REGULATOR(BUCK5, max8997_buck_ops),
	MAX8997_VOLTAGE_REGULATOR(BUCK6, max8997_fixedvolt_ops),
	MAX8997_VOLTAGE_REGULATOR(BUCK7, max8997_buck_ops),
	MAX8997_VOLTAGE_REGULATOR(EN32KHZ_AP, max8997_fixedvolt_ops),
	MAX8997_VOLTAGE_REGULATOR(EN32KHZ_CP, max8997_fixedvolt_ops),
	MAX8997_VOLTAGE_REGULATOR(ENVICHG, max8997_fixedvolt_ops),
	MAX8997_VOLTAGE_REGULATOR(ESAFEOUT1, max8997_safeout_ops),
	MAX8997_VOLTAGE_REGULATOR(ESAFEOUT2, max8997_safeout_ops),
	MAX8997_VOLTAGE_REGULATOR(CHARGER_CV, max8997_fixedstate_ops),
	MAX8997_CURRENT_REGULATOR(CHARGER, max8997_charger_ops),
	MAX8997_CURRENT_REGULATOR(CHARGER_TOPOFF,
				  max8997_charger_fixedstate_ops),
M
MyungJoo Ham 已提交
934 935
};

936
#ifdef CONFIG_OF
937
static int max8997_pmic_dt_parse_dvs_gpio(struct platform_device *pdev,
938 939 940 941 942 943 944 945 946
			struct max8997_platform_data *pdata,
			struct device_node *pmic_np)
{
	int i, gpio;

	for (i = 0; i < 3; i++) {
		gpio = of_get_named_gpio(pmic_np,
					"max8997,pmic-buck125-dvs-gpios", i);
		if (!gpio_is_valid(gpio)) {
947
			dev_err(&pdev->dev, "invalid gpio[%d]: %d\n", i, gpio);
948 949 950 951 952 953 954
			return -EINVAL;
		}
		pdata->buck125_gpios[i] = gpio;
	}
	return 0;
}

955
static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
956 957
					struct max8997_platform_data *pdata)
{
958
	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
959 960 961 962
	struct device_node *pmic_np, *regulators_np, *reg_np;
	struct max8997_regulator_data *rdata;
	unsigned int i, dvs_voltage_nr = 1, ret;

A
Axel Lin 已提交
963
	pmic_np = of_node_get(iodev->dev->of_node);
964
	if (!pmic_np) {
965
		dev_err(&pdev->dev, "could not find pmic sub-node\n");
966 967 968 969 970
		return -ENODEV;
	}

	regulators_np = of_find_node_by_name(pmic_np, "regulators");
	if (!regulators_np) {
971
		dev_err(&pdev->dev, "could not find regulators sub-node\n");
972 973 974 975 976 977 978 979
		return -EINVAL;
	}

	/* count the number of regulators to be supported in pmic */
	pdata->num_regulators = 0;
	for_each_child_of_node(regulators_np, reg_np)
		pdata->num_regulators++;

980
	rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
981 982
				pdata->num_regulators, GFP_KERNEL);
	if (!rdata) {
A
Axel Lin 已提交
983
		of_node_put(regulators_np);
984
		dev_err(&pdev->dev, "could not allocate memory for regulator data\n");
985 986 987 988 989 990 991 992 993 994
		return -ENOMEM;
	}

	pdata->regulators = rdata;
	for_each_child_of_node(regulators_np, reg_np) {
		for (i = 0; i < ARRAY_SIZE(regulators); i++)
			if (!of_node_cmp(reg_np->name, regulators[i].name))
				break;

		if (i == ARRAY_SIZE(regulators)) {
995 996
			dev_warn(&pdev->dev, "don't know how to configure regulator %s\n",
				 reg_np->name);
997 998 999 1000
			continue;
		}

		rdata->id = i;
1001 1002
		rdata->initdata = of_get_regulator_init_data(&pdev->dev,
							     reg_np);
1003 1004 1005
		rdata->reg_node = reg_np;
		rdata++;
	}
A
Axel Lin 已提交
1006
	of_node_put(regulators_np);
1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018

	if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL))
		pdata->buck1_gpiodvs = true;

	if (of_get_property(pmic_np, "max8997,pmic-buck2-uses-gpio-dvs", NULL))
		pdata->buck2_gpiodvs = true;

	if (of_get_property(pmic_np, "max8997,pmic-buck5-uses-gpio-dvs", NULL))
		pdata->buck5_gpiodvs = true;

	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
						pdata->buck5_gpiodvs) {
1019
		ret = max8997_pmic_dt_parse_dvs_gpio(pdev, pdata, pmic_np);
1020 1021 1022 1023 1024 1025 1026 1027 1028 1029
		if (ret)
			return -EINVAL;

		if (of_property_read_u32(pmic_np,
				"max8997,pmic-buck125-default-dvs-idx",
				&pdata->buck125_default_idx)) {
			pdata->buck125_default_idx = 0;
		} else {
			if (pdata->buck125_default_idx >= 8) {
				pdata->buck125_default_idx = 0;
1030
				dev_info(&pdev->dev, "invalid value for default dvs index, using 0 instead\n");
1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043
			}
		}

		if (of_get_property(pmic_np,
			"max8997,pmic-ignore-gpiodvs-side-effect", NULL))
			pdata->ignore_gpiodvs_side_effect = true;

		dvs_voltage_nr = 8;
	}

	if (of_property_read_u32_array(pmic_np,
				"max8997,pmic-buck1-dvs-voltage",
				pdata->buck1_voltage, dvs_voltage_nr)) {
1044
		dev_err(&pdev->dev, "buck1 voltages not specified\n");
1045 1046 1047 1048 1049 1050
		return -EINVAL;
	}

	if (of_property_read_u32_array(pmic_np,
				"max8997,pmic-buck2-dvs-voltage",
				pdata->buck2_voltage, dvs_voltage_nr)) {
1051
		dev_err(&pdev->dev, "buck2 voltages not specified\n");
1052 1053 1054 1055 1056 1057
		return -EINVAL;
	}

	if (of_property_read_u32_array(pmic_np,
				"max8997,pmic-buck5-dvs-voltage",
				pdata->buck5_voltage, dvs_voltage_nr)) {
1058
		dev_err(&pdev->dev, "buck5 voltages not specified\n");
1059 1060 1061 1062 1063 1064
		return -EINVAL;
	}

	return 0;
}
#else
1065
static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
1066 1067 1068 1069 1070 1071
					struct max8997_platform_data *pdata)
{
	return 0;
}
#endif /* CONFIG_OF */

1072
static int max8997_pmic_probe(struct platform_device *pdev)
M
MyungJoo Ham 已提交
1073 1074
{
	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
1075
	struct max8997_platform_data *pdata = iodev->pdata;
1076
	struct regulator_config config = { };
M
MyungJoo Ham 已提交
1077 1078 1079
	struct regulator_dev **rdev;
	struct max8997_data *max8997;
	struct i2c_client *i2c;
1080
	int i, ret, size, nr_dvs;
M
MyungJoo Ham 已提交
1081 1082
	u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;

1083
	if (IS_ERR_OR_NULL(pdata)) {
M
MyungJoo Ham 已提交
1084 1085 1086 1087
		dev_err(pdev->dev.parent, "No platform init data supplied.\n");
		return -ENODEV;
	}

1088
	if (iodev->dev->of_node) {
1089
		ret = max8997_pmic_dt_parse_pdata(pdev, pdata);
1090 1091 1092 1093
		if (ret)
			return ret;
	}

1094 1095
	max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
			       GFP_KERNEL);
M
MyungJoo Ham 已提交
1096 1097 1098 1099
	if (!max8997)
		return -ENOMEM;

	size = sizeof(struct regulator_dev *) * pdata->num_regulators;
1100 1101
	max8997->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
	if (!max8997->rdev)
M
MyungJoo Ham 已提交
1102 1103 1104 1105 1106 1107 1108 1109 1110 1111
		return -ENOMEM;

	rdev = max8997->rdev;
	max8997->dev = &pdev->dev;
	max8997->iodev = iodev;
	max8997->num_regulators = pdata->num_regulators;
	platform_set_drvdata(pdev, max8997);
	i2c = max8997->iodev->i2c;

	max8997->buck125_gpioindex = pdata->buck125_default_idx;
1112 1113 1114 1115 1116
	max8997->buck1_gpiodvs = pdata->buck1_gpiodvs;
	max8997->buck2_gpiodvs = pdata->buck2_gpiodvs;
	max8997->buck5_gpiodvs = pdata->buck5_gpiodvs;
	memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3);
	max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect;
M
MyungJoo Ham 已提交
1117

1118 1119 1120 1121
	nr_dvs = (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
			pdata->buck5_gpiodvs) ? 8 : 1;

	for (i = 0; i < nr_dvs; i++) {
M
MyungJoo Ham 已提交
1122 1123 1124
		max8997->buck1_vol[i] = ret =
			max8997_get_voltage_proper_val(
					&buck1245_voltage_map_desc,
1125 1126
					pdata->buck1_voltage[i],
					pdata->buck1_voltage[i] +
M
MyungJoo Ham 已提交
1127 1128
					buck1245_voltage_map_desc.step);
		if (ret < 0)
1129
			goto err_out;
M
MyungJoo Ham 已提交
1130 1131 1132 1133

		max8997->buck2_vol[i] = ret =
			max8997_get_voltage_proper_val(
					&buck1245_voltage_map_desc,
1134 1135
					pdata->buck2_voltage[i],
					pdata->buck2_voltage[i] +
M
MyungJoo Ham 已提交
1136 1137
					buck1245_voltage_map_desc.step);
		if (ret < 0)
1138
			goto err_out;
M
MyungJoo Ham 已提交
1139 1140 1141 1142

		max8997->buck5_vol[i] = ret =
			max8997_get_voltage_proper_val(
					&buck1245_voltage_map_desc,
1143 1144
					pdata->buck5_voltage[i],
					pdata->buck5_voltage[i] +
M
MyungJoo Ham 已提交
1145 1146
					buck1245_voltage_map_desc.step);
		if (ret < 0)
1147
			goto err_out;
M
MyungJoo Ham 已提交
1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158

		if (max_buck1 < max8997->buck1_vol[i])
			max_buck1 = max8997->buck1_vol[i];
		if (max_buck2 < max8997->buck2_vol[i])
			max_buck2 = max8997->buck2_vol[i];
		if (max_buck5 < max8997->buck5_vol[i])
			max_buck5 = max8997->buck5_vol[i];
	}

	/* For the safety, set max voltage before setting up */
	for (i = 0; i < 8; i++) {
1159
		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
M
MyungJoo Ham 已提交
1160
				max_buck1, 0x3f);
1161
		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
M
MyungJoo Ham 已提交
1162
				max_buck2, 0x3f);
1163
		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
M
MyungJoo Ham 已提交
1164 1165 1166
				max_buck5, 0x3f);
	}

1167
	/* Initialize all the DVS related BUCK registers */
1168
	for (i = 0; i < nr_dvs; i++) {
1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179
		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
				max8997->buck1_vol[i],
				0x3f);
		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
				max8997->buck2_vol[i],
				0x3f);
		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
				max8997->buck5_vol[i],
				0x3f);
	}

M
MyungJoo Ham 已提交
1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191
	/*
	 * If buck 1, 2, and 5 do not care DVS GPIO settings, ignore them.
	 * If at least one of them cares, set gpios.
	 */
	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
			pdata->buck5_gpiodvs) {

		if (!gpio_is_valid(pdata->buck125_gpios[0]) ||
				!gpio_is_valid(pdata->buck125_gpios[1]) ||
				!gpio_is_valid(pdata->buck125_gpios[2])) {
			dev_err(&pdev->dev, "GPIO NOT VALID\n");
			ret = -EINVAL;
1192
			goto err_out;
M
MyungJoo Ham 已提交
1193 1194
		}

1195 1196 1197
		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[0],
					"MAX8997 SET1");
		if (ret)
1198
			goto err_out;
1199 1200 1201 1202

		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[1],
					"MAX8997 SET2");
		if (ret)
1203
			goto err_out;
M
MyungJoo Ham 已提交
1204

1205
		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[2],
M
MyungJoo Ham 已提交
1206
				"MAX8997 SET3");
1207
		if (ret)
1208
			goto err_out;
M
MyungJoo Ham 已提交
1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228

		gpio_direction_output(pdata->buck125_gpios[0],
				(max8997->buck125_gpioindex >> 2)
				& 0x1); /* SET1 */
		gpio_direction_output(pdata->buck125_gpios[1],
				(max8997->buck125_gpioindex >> 1)
				& 0x1); /* SET2 */
		gpio_direction_output(pdata->buck125_gpios[2],
				(max8997->buck125_gpioindex >> 0)
				& 0x1); /* SET3 */
	}

	/* DVS-GPIO disabled */
	max8997_update_reg(i2c, MAX8997_REG_BUCK1CTRL, (pdata->buck1_gpiodvs) ?
			(1 << 1) : (0 << 1), 1 << 1);
	max8997_update_reg(i2c, MAX8997_REG_BUCK2CTRL, (pdata->buck2_gpiodvs) ?
			(1 << 1) : (0 << 1), 1 << 1);
	max8997_update_reg(i2c, MAX8997_REG_BUCK5CTRL, (pdata->buck5_gpiodvs) ?
			(1 << 1) : (0 << 1), 1 << 1);

1229 1230 1231 1232
	/* Misc Settings */
	max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
	max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);

M
MyungJoo Ham 已提交
1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245
	for (i = 0; i < pdata->num_regulators; i++) {
		const struct voltage_map_desc *desc;
		int id = pdata->regulators[i].id;

		desc = reg_voltage_map[id];
		if (desc)
			regulators[id].n_voltages =
				(desc->max - desc->min) / desc->step + 1;
		else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2)
			regulators[id].n_voltages = 4;
		else if (id == MAX8997_CHARGER_CV)
			regulators[id].n_voltages = 16;

1246 1247 1248
		config.dev = max8997->dev;
		config.init_data = pdata->regulators[i].initdata;
		config.driver_data = max8997;
1249
		config.of_node = pdata->regulators[i].reg_node;
1250 1251

		rdev[i] = regulator_register(&regulators[id], &config);
M
MyungJoo Ham 已提交
1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262
		if (IS_ERR(rdev[i])) {
			ret = PTR_ERR(rdev[i]);
			dev_err(max8997->dev, "regulator init failed for %d\n",
					id);
			rdev[i] = NULL;
			goto err;
		}
	}

	return 0;
err:
1263 1264 1265
	while (--i >= 0)
		regulator_unregister(rdev[i]);
err_out:
M
MyungJoo Ham 已提交
1266 1267 1268
	return ret;
}

1269
static int max8997_pmic_remove(struct platform_device *pdev)
M
MyungJoo Ham 已提交
1270 1271 1272 1273 1274 1275
{
	struct max8997_data *max8997 = platform_get_drvdata(pdev);
	struct regulator_dev **rdev = max8997->rdev;
	int i;

	for (i = 0; i < max8997->num_regulators; i++)
1276
		regulator_unregister(rdev[i]);
M
MyungJoo Ham 已提交
1277 1278 1279 1280 1281 1282 1283
	return 0;
}

static const struct platform_device_id max8997_pmic_id[] = {
	{ "max8997-pmic", 0},
	{ },
};
1284
MODULE_DEVICE_TABLE(platform, max8997_pmic_id);
M
MyungJoo Ham 已提交
1285 1286 1287 1288 1289 1290 1291

static struct platform_driver max8997_pmic_driver = {
	.driver = {
		.name = "max8997-pmic",
		.owner = THIS_MODULE,
	},
	.probe = max8997_pmic_probe,
1292
	.remove = max8997_pmic_remove,
M
MyungJoo Ham 已提交
1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310
	.id_table = max8997_pmic_id,
};

static int __init max8997_pmic_init(void)
{
	return platform_driver_register(&max8997_pmic_driver);
}
subsys_initcall(max8997_pmic_init);

static void __exit max8997_pmic_cleanup(void)
{
	platform_driver_unregister(&max8997_pmic_driver);
}
module_exit(max8997_pmic_cleanup);

MODULE_DESCRIPTION("MAXIM 8997/8966 Regulator Driver");
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
MODULE_LICENSE("GPL");