mei_dev.h

/*
 *
 * Intel Management Engine Interface (Intel MEI) Linux driver
 * Copyright (c) 2003-2012, Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 */

#ifndef _MEI_DEV_H_
#define _MEI_DEV_H_

#include <linux/types.h>
#include <linux/watchdog.h>
#include <linux/poll.h>
#include <linux/mei.h>
#include <linux/mei_cl_bus.h>

#include "hw.h"
#include "hbm.h"

/*
 * watch dog definition
 */
#define MEI_WD_HDR_SIZE       4
#define MEI_WD_STOP_MSG_SIZE  MEI_WD_HDR_SIZE
#define MEI_WD_START_MSG_SIZE (MEI_WD_HDR_SIZE + 16)

#define MEI_WD_DEFAULT_TIMEOUT   120  /* seconds */
#define MEI_WD_MIN_TIMEOUT       120  /* seconds */
#define MEI_WD_MAX_TIMEOUT     65535  /* seconds */

#define MEI_WD_STOP_TIMEOUT      10 /* msecs */

#define MEI_WD_STATE_INDEPENDENCE_MSG_SENT       (1 << 0)

#define MEI_RD_MSG_BUF_SIZE           (128 * sizeof(u32))


/*
 * AMTHI Client UUID
 */
extern const uuid_le mei_amthif_guid;

/*
 * Watchdog Client UUID
 */
extern const uuid_le mei_wd_guid;

/*
 * Number of Maximum MEI Clients
 */
#define MEI_CLIENTS_MAX 256

/*
 * maximum number of consecutive resets
 */
#define MEI_MAX_CONSEC_RESET  3

/*
 * Number of File descriptors/handles
 * that can be opened to the driver.
 *
 * Limit to 255: 256 Total Clients
 * minus internal client for MEI Bus Messages
 */
#define  MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 1)

/*
 * Internal Clients Number
 */
#define MEI_HOST_CLIENT_ID_ANY        (-1)
#define MEI_HBM_HOST_CLIENT_ID         0 /* not used, just for documentation */
#define MEI_WD_HOST_CLIENT_ID          1
#define MEI_IAMTHIF_HOST_CLIENT_ID     2


/* File state */
enum file_state {
	MEI_FILE_INITIALIZING = 0,
	MEI_FILE_CONNECTING,
	MEI_FILE_CONNECTED,
	MEI_FILE_DISCONNECTING,
	MEI_FILE_DISCONNECTED
};

/* MEI device states */
enum mei_dev_state {
	MEI_DEV_INITIALIZING = 0,
	MEI_DEV_INIT_CLIENTS,
	MEI_DEV_ENABLED,
	MEI_DEV_RESETTING,
	MEI_DEV_DISABLED,
	MEI_DEV_POWER_DOWN,
	MEI_DEV_POWER_UP
};

const char *mei_dev_state_str(int state);

enum iamthif_states {
	MEI_IAMTHIF_IDLE,
	MEI_IAMTHIF_WRITING,
	MEI_IAMTHIF_FLOW_CONTROL,
	MEI_IAMTHIF_READING,
	MEI_IAMTHIF_READ_COMPLETE
};

enum mei_file_transaction_states {
	MEI_IDLE,
	MEI_WRITING,
	MEI_WRITE_COMPLETE,
	MEI_FLOW_CONTROL,
	MEI_READING,
	MEI_READ_COMPLETE
};

enum mei_wd_states {
	MEI_WD_IDLE,
	MEI_WD_RUNNING,
	MEI_WD_STOPPING,
};

/**
 * enum mei_cb_file_ops  - file operation associated with the callback
 * @MEI_FOP_READ      - read
 * @MEI_FOP_WRITE     - write
 * @MEI_FOP_CONNECT   - connect
 * @MEI_FOP_DISCONNECT_RSP - disconnect response
 * @MEI_FOP_OPEN      - open
 * @MEI_FOP_CLOSE     - close
 */
enum mei_cb_file_ops {
	MEI_FOP_READ = 0,
	MEI_FOP_WRITE,
	MEI_FOP_CONNECT,
	MEI_FOP_DISCONNECT_RSP,
	MEI_FOP_OPEN,
	MEI_FOP_CLOSE
};

/*
 * Intel MEI message data struct
 */
struct mei_msg_data {
	u32 size;
	unsigned char *data;
};

/* Maximum number of processed FW status registers */
#define MEI_FW_STATUS_MAX 2

/*
 * struct mei_fw_status - storage of FW status data
 *
 * @count - number of actually available elements in array
 * @status - FW status registers
 */
struct mei_fw_status {
	int count;
	u32 status[MEI_FW_STATUS_MAX];
};

/**
 * struct mei_me_client - representation of me (fw) client
 *
 * @props  - client properties
 * @client_id - me client id
 * @mei_flow_ctrl_creds - flow control credits
 */
struct mei_me_client {
	struct mei_client_properties props;
	u8 client_id;
	u8 mei_flow_ctrl_creds;
};


struct mei_cl;

/**
 * struct mei_cl_cb - file operation callback structure
 *
 * @cl - file client who is running this operation
 * @fop_type - file operation type
 */
struct mei_cl_cb {
	struct list_head list;
	struct mei_cl *cl;
	enum mei_cb_file_ops fop_type;
	struct mei_msg_data request_buffer;
	struct mei_msg_data response_buffer;
	unsigned long buf_idx;
	unsigned long read_time;
	struct file *file_object;
	u32 internal:1;
};

/* MEI client instance carried as file->private_data*/
struct mei_cl {
	struct list_head link;
	struct mei_device *dev;
	enum file_state state;
	wait_queue_head_t tx_wait;
	wait_queue_head_t rx_wait;
	wait_queue_head_t wait;
	int status;
	/* ID of client connected */
	u8 host_client_id;
	u8 me_client_id;
	u8 mei_flow_ctrl_creds;
	u8 timer_count;
	enum mei_file_transaction_states reading_state;
	enum mei_file_transaction_states writing_state;
	struct mei_cl_cb *read_cb;

	/* MEI CL bus data */
	struct mei_cl_device *device;
	struct list_head device_link;
	uuid_le device_uuid;
};

/** struct mei_hw_ops
 *
 * @fw_status        - read FW status from PCI config space
 * @host_is_ready    - query for host readiness

 * @hw_is_ready      - query if hw is ready
 * @hw_reset         - reset hw
 * @hw_start         - start hw after reset
 * @hw_config        - configure hw

 * @pg_state         - power gating state of the device
 * @pg_is_enabled    - is power gating enabled

 * @intr_clear       - clear pending interrupts
 * @intr_enable      - enable interrupts
 * @intr_disable     - disable interrupts

 * @hbuf_free_slots  - query for write buffer empty slots
 * @hbuf_is_ready    - query if write buffer is empty
 * @hbuf_max_len     - query for write buffer max len

 * @write            - write a message to FW

 * @rdbuf_full_slots - query how many slots are filled

 * @read_hdr         - get first 4 bytes (header)
 * @read             - read a buffer from the FW
 */
struct mei_hw_ops {

	int (*fw_status)(struct mei_device *dev,
		struct mei_fw_status *fw_status);
	bool (*host_is_ready)(struct mei_device *dev);

	bool (*hw_is_ready)(struct mei_device *dev);
	int (*hw_reset)(struct mei_device *dev, bool enable);
	int (*hw_start)(struct mei_device *dev);
	void (*hw_config)(struct mei_device *dev);

	enum mei_pg_state (*pg_state)(struct mei_device *dev);
	bool (*pg_is_enabled)(struct mei_device *dev);

	void (*intr_clear)(struct mei_device *dev);
	void (*intr_enable)(struct mei_device *dev);
	void (*intr_disable)(struct mei_device *dev);

	int (*hbuf_free_slots)(struct mei_device *dev);
	bool (*hbuf_is_ready)(struct mei_device *dev);
	size_t (*hbuf_max_len)(const struct mei_device *dev);

	int (*write)(struct mei_device *dev,
		     struct mei_msg_hdr *hdr,
		     unsigned char *buf);

	int (*rdbuf_full_slots)(struct mei_device *dev);

	u32 (*read_hdr)(const struct mei_device *dev);
	int (*read)(struct mei_device *dev,
		     unsigned char *buf, unsigned long len);
};

/* MEI bus API*/

/**
 * struct mei_cl_ops - MEI CL device ops
 * This structure allows ME host clients to implement technology
 * specific operations.
 *
 * @enable: Enable an MEI CL device. Some devices require specific
 *	HECI commands to initialize completely.
 * @disable: Disable an MEI CL device.
 * @send: Tx hook for the device. This allows ME host clients to trap
 *	the device driver buffers before actually physically
 *	pushing it to the ME.
 * @recv: Rx hook for the device. This allows ME host clients to trap the
 *	ME buffers before forwarding them to the device driver.
 */
struct mei_cl_ops {
	int (*enable)(struct mei_cl_device *device);
	int (*disable)(struct mei_cl_device *device);
	int (*send)(struct mei_cl_device *device, u8 *buf, size_t length);
	int (*recv)(struct mei_cl_device *device, u8 *buf, size_t length);
};

struct mei_cl_device *mei_cl_add_device(struct mei_device *dev,
					uuid_le uuid, char *name,
					struct mei_cl_ops *ops);
void mei_cl_remove_device(struct mei_cl_device *device);

int __mei_cl_async_send(struct mei_cl *cl, u8 *buf, size_t length);
int __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length);
int __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length);
void mei_cl_bus_rx_event(struct mei_cl *cl);
void mei_cl_bus_remove_devices(struct mei_device *dev);
int mei_cl_bus_init(void);
void mei_cl_bus_exit(void);


/**
 * struct mei_cl_device - MEI device handle
 * An mei_cl_device pointer is returned from mei_add_device()
 * and links MEI bus clients to their actual ME host client pointer.
 * Drivers for MEI devices will get an mei_cl_device pointer
 * when being probed and shall use it for doing ME bus I/O.
 *
 * @dev: linux driver model device pointer
 * @uuid: me client uuid
 * @cl: mei client
 * @ops: ME transport ops
 * @event_cb: Drivers register this callback to get asynchronous ME
 *	events (e.g. Rx buffer pending) notifications.
 * @events: Events bitmask sent to the driver.
 * @priv_data: client private data
 */
struct mei_cl_device {
	struct device dev;

	struct mei_cl *cl;

	const struct mei_cl_ops *ops;

	struct work_struct event_work;
	mei_cl_event_cb_t event_cb;
	void *event_context;
	unsigned long events;

	void *priv_data;
};


 /**
 * enum mei_pg_event - power gating transition events
 *
 * @MEI_PG_EVENT_IDLE: the driver is not in power gating transition
 * @MEI_PG_EVENT_WAIT: the driver is waiting for a pg event to complete
 * @MEI_PG_EVENT_RECEIVED: the driver received pg event
 */
enum mei_pg_event {
	MEI_PG_EVENT_IDLE,
	MEI_PG_EVENT_WAIT,
	MEI_PG_EVENT_RECEIVED,
};

/**
 * enum mei_pg_state - device internal power gating state
 *
 * @MEI_PG_OFF: device is not power gated - it is active
 * @MEI_PG_ON:  device is power gated - it is in lower power state
 */
enum mei_pg_state {
	MEI_PG_OFF = 0,
	MEI_PG_ON =  1,
};

/**
 * struct mei_device -  MEI private device struct

 * @reset_count - limits the number of consecutive resets
 * @hbm_state - state of host bus message protocol
 * @pg_event - power gating event
 * @mem_addr - mem mapped base register address

 * @hbuf_depth - depth of hardware host/write buffer is slots
 * @hbuf_is_ready - query if the host host/write buffer is ready
 * @wr_msg - the buffer for hbm control messages
 */
struct mei_device {
	struct pci_dev *pdev;	/* pointer to pci device struct */
	/*
	 * lists of queues
	 */
	/* array of pointers to aio lists */
	struct mei_cl_cb read_list;		/* driver read queue */
	struct mei_cl_cb write_list;		/* driver write queue */
	struct mei_cl_cb write_waiting_list;	/* write waiting queue */
	struct mei_cl_cb ctrl_wr_list;		/* managed write IOCTL list */
	struct mei_cl_cb ctrl_rd_list;		/* managed read IOCTL list */

	/*
	 * list of files
	 */
	struct list_head file_list;
	long open_handle_count;

	/*
	 * lock for the device
	 */
	struct mutex device_lock; /* device lock */
	struct delayed_work timer_work;	/* MEI timer delayed work (timeouts) */

	bool recvd_hw_ready;
	/*
	 * waiting queue for receive message from FW
	 */
	wait_queue_head_t wait_hw_ready;
	wait_queue_head_t wait_pg;
	wait_queue_head_t wait_recvd_msg;
	wait_queue_head_t wait_stop_wd;

	/*
	 * mei device  states
	 */
	unsigned long reset_count;
	enum mei_dev_state dev_state;
	enum mei_hbm_state hbm_state;
	u16 init_clients_timer;

	/*
	 * Power Gating support
	 */
	enum mei_pg_event pg_event;
#ifdef CONFIG_PM_RUNTIME
	struct dev_pm_domain pg_domain;
#endif /* CONFIG_PM_RUNTIME */

	unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE];	/* control messages */
	u32 rd_msg_hdr;

	/* write buffer */
	u8 hbuf_depth;
	bool hbuf_is_ready;

	/* used for control messages */
	struct {
		struct mei_msg_hdr hdr;
		unsigned char data[128];
	} wr_msg;

	struct hbm_version version;

	struct mei_me_client *me_clients; /* Note: memory has to be allocated */
	DECLARE_BITMAP(me_clients_map, MEI_CLIENTS_MAX);
	DECLARE_BITMAP(host_clients_map, MEI_CLIENTS_MAX);
	unsigned long me_clients_num;
	unsigned long me_client_presentation_num;
	unsigned long me_client_index;

	struct mei_cl wd_cl;
	enum mei_wd_states wd_state;
	bool wd_pending;
	u16 wd_timeout;
	unsigned char wd_data[MEI_WD_START_MSG_SIZE];


	/* amthif list for cmd waiting */
	struct mei_cl_cb amthif_cmd_list;
	/* driver managed amthif list for reading completed amthif cmd data */
	struct mei_cl_cb amthif_rd_complete_list;
	struct file *iamthif_file_object;
	struct mei_cl iamthif_cl;
	struct mei_cl_cb *iamthif_current_cb;
	long iamthif_open_count;
	int iamthif_mtu;
	unsigned long iamthif_timer;
	u32 iamthif_stall_timer;
	unsigned char *iamthif_msg_buf; /* Note: memory has to be allocated */
	u32 iamthif_msg_buf_size;
	u32 iamthif_msg_buf_index;
	enum iamthif_states iamthif_state;
	bool iamthif_flow_control_pending;
	bool iamthif_ioctl;
	bool iamthif_canceled;

	struct work_struct init_work;
	struct work_struct reset_work;

	/* List of bus devices */
	struct list_head device_list;

#if IS_ENABLED(CONFIG_DEBUG_FS)
	struct dentry *dbgfs_dir;
#endif /* CONFIG_DEBUG_FS */


	const struct mei_hw_ops *ops;
	char hw[0] __aligned(sizeof(void *));
};

static inline unsigned long mei_secs_to_jiffies(unsigned long sec)
{
	return msecs_to_jiffies(sec * MSEC_PER_SEC);
}

/**
 * mei_data2slots - get slots - number of (dwords) from a message length
 *	+ size of the mei header
 * @length - size of the messages in bytes
 * returns  - number of slots
 */
static inline u32 mei_data2slots(size_t length)
{
	return DIV_ROUND_UP(sizeof(struct mei_msg_hdr) + length, 4);
}

/**
 * mei_slots2data- get data in slots - bytes from slots
 * @slots -  number of available slots
 * returns  - number of bytes in slots
 */
static inline u32 mei_slots2data(int slots)
{
	return slots * 4;
}

/*
 * mei init function prototypes
 */
void mei_device_init(struct mei_device *dev);
int mei_reset(struct mei_device *dev);
int mei_start(struct mei_device *dev);
int mei_restart(struct mei_device *dev);
void mei_stop(struct mei_device *dev);
void mei_cancel_work(struct mei_device *dev);

/*
 *  MEI interrupt functions prototype
 */

void mei_timer(struct work_struct *work);
int mei_irq_read_handler(struct mei_device *dev,
		struct mei_cl_cb *cmpl_list, s32 *slots);

int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list);
void mei_irq_compl_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list);

/*
 * AMTHIF - AMT Host Interface Functions
 */
void mei_amthif_reset_params(struct mei_device *dev);

int mei_amthif_host_init(struct mei_device *dev);

int mei_amthif_write(struct mei_device *dev, struct mei_cl_cb *priv_cb);

int mei_amthif_read(struct mei_device *dev, struct file *file,
		char __user *ubuf, size_t length, loff_t *offset);

unsigned int mei_amthif_poll(struct mei_device *dev,
		struct file *file, poll_table *wait);

int mei_amthif_release(struct mei_device *dev, struct file *file);

struct mei_cl_cb *mei_amthif_find_read_list_entry(struct mei_device *dev,
						struct file *file);

void mei_amthif_run_next_cmd(struct mei_device *dev);

int mei_amthif_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
			struct mei_cl_cb *cmpl_list);

void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb);
int mei_amthif_irq_read_msg(struct mei_device *dev,
			    struct mei_msg_hdr *mei_hdr,
			    struct mei_cl_cb *complete_list);
int mei_amthif_irq_read(struct mei_device *dev, s32 *slots);

/*
 * NFC functions
 */
int mei_nfc_host_init(struct mei_device *dev);
void mei_nfc_host_exit(struct mei_device *dev);

/*
 * NFC Client UUID
 */
extern const uuid_le mei_nfc_guid;

int mei_wd_send(struct mei_device *dev);
int mei_wd_stop(struct mei_device *dev);
int mei_wd_host_init(struct mei_device *dev);
/*
 * mei_watchdog_register  - Registering watchdog interface
 *   once we got connection to the WD Client
 * @dev - mei device
 */
int mei_watchdog_register(struct mei_device *dev);
/*
 * mei_watchdog_unregister  - Unregistering watchdog interface
 * @dev - mei device
 */
void mei_watchdog_unregister(struct mei_device *dev);

/*
 * Register Access Function
 */

static inline void mei_hw_config(struct mei_device *dev)
{
	dev->ops->hw_config(dev);
}

static inline enum mei_pg_state mei_pg_state(struct mei_device *dev)
{
	return dev->ops->pg_state(dev);
}

static inline bool mei_pg_is_enabled(struct mei_device *dev)
{
	return dev->ops->pg_is_enabled(dev);
}

static inline int mei_hw_reset(struct mei_device *dev, bool enable)
{
	return dev->ops->hw_reset(dev, enable);
}

static inline int mei_hw_start(struct mei_device *dev)
{
	return dev->ops->hw_start(dev);
}

static inline void mei_clear_interrupts(struct mei_device *dev)
{
	dev->ops->intr_clear(dev);
}

static inline void mei_enable_interrupts(struct mei_device *dev)
{
	dev->ops->intr_enable(dev);
}

static inline void mei_disable_interrupts(struct mei_device *dev)
{
	dev->ops->intr_disable(dev);
}

static inline bool mei_host_is_ready(struct mei_device *dev)
{
	return dev->ops->host_is_ready(dev);
}
static inline bool mei_hw_is_ready(struct mei_device *dev)
{
	return dev->ops->hw_is_ready(dev);
}

static inline bool mei_hbuf_is_ready(struct mei_device *dev)
{
	return dev->ops->hbuf_is_ready(dev);
}

static inline int mei_hbuf_empty_slots(struct mei_device *dev)
{
	return dev->ops->hbuf_free_slots(dev);
}

static inline size_t mei_hbuf_max_len(const struct mei_device *dev)
{
	return dev->ops->hbuf_max_len(dev);
}

static inline int mei_write_message(struct mei_device *dev,
			struct mei_msg_hdr *hdr,
			unsigned char *buf)
{
	return dev->ops->write(dev, hdr, buf);
}

static inline u32 mei_read_hdr(const struct mei_device *dev)
{
	return dev->ops->read_hdr(dev);
}

static inline void mei_read_slots(struct mei_device *dev,
		     unsigned char *buf, unsigned long len)
{
	dev->ops->read(dev, buf, len);
}

static inline int mei_count_full_read_slots(struct mei_device *dev)
{
	return dev->ops->rdbuf_full_slots(dev);
}

static inline int mei_fw_status(struct mei_device *dev,
				struct mei_fw_status *fw_status)
{
	return dev->ops->fw_status(dev, fw_status);
}

#define FW_STS_FMT "%08X %08X"
#define FW_STS_PRM(fw_status) \
	(fw_status).count > 0 ? (fw_status).status[0] : 0xDEADBEEF, \
	(fw_status).count > 1 ? (fw_status).status[1] : 0xDEADBEEF

bool mei_hbuf_acquire(struct mei_device *dev);

bool mei_write_is_idle(struct mei_device *dev);

#if IS_ENABLED(CONFIG_DEBUG_FS)
int mei_dbgfs_register(struct mei_device *dev, const char *name);
void mei_dbgfs_deregister(struct mei_device *dev);
#else
static inline int mei_dbgfs_register(struct mei_device *dev, const char *name)
{
	return 0;
}
static inline void mei_dbgfs_deregister(struct mei_device *dev) {}
#endif /* CONFIG_DEBUG_FS */

int mei_register(struct mei_device *dev);
void mei_deregister(struct mei_device *dev);

#define MEI_HDR_FMT "hdr:host=%02d me=%02d len=%d internal=%1d comp=%1d"
#define MEI_HDR_PRM(hdr)                  \
	(hdr)->host_addr, (hdr)->me_addr, \
	(hdr)->length, (hdr)->internal, (hdr)->msg_complete

#endif