libata-core.c 169.6 KB
Newer Older
L
Linus Torvalds 已提交
1
/*
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
 *  libata-core.c - helper library for ATA
 *
 *  Maintained by:  Jeff Garzik <jgarzik@pobox.com>
 *    		    Please ALWAYS copy linux-ide@vger.kernel.org
 *		    on emails.
 *
 *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
 *  Copyright 2003-2004 Jeff Garzik
 *
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2, or (at your option)
 *  any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; see the file COPYING.  If not, write to
 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *
 *  libata documentation is available via 'make {ps|pdf}docs',
 *  as Documentation/DocBook/libata.*
 *
 *  Hardware documentation available from http://www.t13.org/ and
 *  http://www.sata-io.org/
 *
33 34 35 36 37 38 39 40
 *  Standards documents from:
 *	http://www.t13.org (ATA standards, PCI DMA IDE spec)
 *	http://www.t10.org (SCSI MMC - for ATAPI MMC)
 *	http://www.sata-io.org (SATA)
 *	http://www.compactflash.org (CF)
 *	http://www.qic.org (QIC157 - Tape and DSC)
 *	http://www.ce-ata.org (CE-ATA: not supported)
 *
L
Linus Torvalds 已提交
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
57
#include <linux/scatterlist.h>
58
#include <linux/io.h>
59
#include <linux/async.h>
L
Linus Torvalds 已提交
60
#include <scsi/scsi.h>
61
#include <scsi/scsi_cmnd.h>
L
Linus Torvalds 已提交
62 63 64
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/byteorder.h>
T
Tejun Heo 已提交
65
#include <linux/cdrom.h>
L
Linus Torvalds 已提交
66 67 68

#include "libata.h"

69

70
/* debounce timing parameters in msecs { interval, duration, timeout } */
71 72 73
const unsigned long sata_deb_timing_normal[]		= {   5,  100, 2000 };
const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
74

75
const struct ata_port_operations ata_base_port_ops = {
76
	.prereset		= ata_std_prereset,
77
	.postreset		= ata_std_postreset,
78
	.error_handler		= ata_std_error_handler,
79 80 81 82 83 84
};

const struct ata_port_operations sata_port_ops = {
	.inherits		= &ata_base_port_ops,

	.qc_defer		= ata_std_qc_defer,
85
	.hardreset		= sata_std_hardreset,
86 87
};

T
Tejun Heo 已提交
88 89 90
static unsigned int ata_dev_init_params(struct ata_device *dev,
					u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
91 92
static unsigned int ata_dev_set_feature(struct ata_device *dev,
					u8 enable, u8 feature);
T
Tejun Heo 已提交
93
static void ata_dev_xfermask(struct ata_device *dev);
T
Tejun Heo 已提交
94
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
L
Linus Torvalds 已提交
95

96
unsigned int ata_print_id = 1;
L
Linus Torvalds 已提交
97 98
static struct workqueue_struct *ata_wq;

99 100
struct workqueue_struct *ata_aux_wq;

101 102 103 104 105 106 107
struct ata_force_param {
	const char	*name;
	unsigned int	cbl;
	int		spd_limit;
	unsigned long	xfer_mask;
	unsigned int	horkage_on;
	unsigned int	horkage_off;
108
	unsigned int	lflags;
109 110 111 112 113 114 115 116 117 118 119 120
};

struct ata_force_ent {
	int			port;
	int			device;
	struct ata_force_param	param;
};

static struct ata_force_ent *ata_force_tbl;
static int ata_force_tbl_size;

static char ata_force_param_buf[PAGE_SIZE] __initdata;
121 122
/* param_buf is thrown away after initialization, disallow read */
module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
123 124
MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");

125
static int atapi_enabled = 1;
126 127 128
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");

A
Adrian Bunk 已提交
129
static int atapi_dmadir = 0;
130 131 132
module_param(atapi_dmadir, int, 0444);
MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");

133 134 135 136
int atapi_passthru16 = 1;
module_param(atapi_passthru16, int, 0444);
MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)");

J
Jeff Garzik 已提交
137 138 139 140
int libata_fua = 0;
module_param_named(fua, libata_fua, int, 0444);
MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");

141
static int ata_ignore_hpa;
A
Alan Cox 已提交
142 143 144
module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)");

145 146 147 148
static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA;
module_param_named(dma, libata_dma_mask, int, 0444);
MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)");

149
static int ata_probe_timeout;
A
Andrew Morton 已提交
150 151 152
module_param(ata_probe_timeout, int, 0444);
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");

J
Jeff Garzik 已提交
153
int libata_noacpi = 0;
154
module_param_named(noacpi, libata_noacpi, int, 0444);
J
Jeff Garzik 已提交
155
MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set");
156

157 158 159 160
int libata_allow_tpm = 0;
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands");

L
Linus Torvalds 已提交
161 162 163 164 165
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);

E
Edward Falk 已提交
166

167 168 169 170 171
static bool ata_sstatus_online(u32 sstatus)
{
	return (sstatus & 0xf) == 0x3;
}

T
Tejun Heo 已提交
172 173 174 175 176 177 178 179
/**
 *	ata_link_next - link iteration helper
 *	@link: the previous link, NULL to start
 *	@ap: ATA port containing links to iterate
 *	@mode: iteration mode, one of ATA_LITER_*
 *
 *	LOCKING:
 *	Host lock or EH context.
T
Tejun Heo 已提交
180
 *
T
Tejun Heo 已提交
181 182
 *	RETURNS:
 *	Pointer to the next link.
T
Tejun Heo 已提交
183
 */
T
Tejun Heo 已提交
184 185
struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap,
			       enum ata_link_iter_mode mode)
T
Tejun Heo 已提交
186
{
T
Tejun Heo 已提交
187 188 189
	BUG_ON(mode != ATA_LITER_EDGE &&
	       mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST);

T
Tejun Heo 已提交
190
	/* NULL link indicates start of iteration */
T
Tejun Heo 已提交
191 192 193 194 195 196 197 198 199 200
	if (!link)
		switch (mode) {
		case ATA_LITER_EDGE:
		case ATA_LITER_PMP_FIRST:
			if (sata_pmp_attached(ap))
				return ap->pmp_link;
			/* fall through */
		case ATA_LITER_HOST_FIRST:
			return &ap->link;
		}
T
Tejun Heo 已提交
201

T
Tejun Heo 已提交
202 203 204 205 206 207 208 209 210
	/* we just iterated over the host link, what's next? */
	if (link == &ap->link)
		switch (mode) {
		case ATA_LITER_HOST_FIRST:
			if (sata_pmp_attached(ap))
				return ap->pmp_link;
			/* fall through */
		case ATA_LITER_PMP_FIRST:
			if (unlikely(ap->slave_link))
T
Tejun Heo 已提交
211
				return ap->slave_link;
T
Tejun Heo 已提交
212 213
			/* fall through */
		case ATA_LITER_EDGE:
T
Tejun Heo 已提交
214
			return NULL;
T
Tejun Heo 已提交
215
		}
T
Tejun Heo 已提交
216

T
Tejun Heo 已提交
217 218 219 220
	/* slave_link excludes PMP */
	if (unlikely(link == ap->slave_link))
		return NULL;

T
Tejun Heo 已提交
221
	/* we were over a PMP link */
T
Tejun Heo 已提交
222 223
	if (++link < ap->pmp_link + ap->nr_pmp_links)
		return link;
T
Tejun Heo 已提交
224 225 226 227

	if (mode == ATA_LITER_PMP_FIRST)
		return &ap->link;

T
Tejun Heo 已提交
228 229 230
	return NULL;
}

T
Tejun Heo 已提交
231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283
/**
 *	ata_dev_next - device iteration helper
 *	@dev: the previous device, NULL to start
 *	@link: ATA link containing devices to iterate
 *	@mode: iteration mode, one of ATA_DITER_*
 *
 *	LOCKING:
 *	Host lock or EH context.
 *
 *	RETURNS:
 *	Pointer to the next device.
 */
struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link,
				enum ata_dev_iter_mode mode)
{
	BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE &&
	       mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE);

	/* NULL dev indicates start of iteration */
	if (!dev)
		switch (mode) {
		case ATA_DITER_ENABLED:
		case ATA_DITER_ALL:
			dev = link->device;
			goto check;
		case ATA_DITER_ENABLED_REVERSE:
		case ATA_DITER_ALL_REVERSE:
			dev = link->device + ata_link_max_devices(link) - 1;
			goto check;
		}

 next:
	/* move to the next one */
	switch (mode) {
	case ATA_DITER_ENABLED:
	case ATA_DITER_ALL:
		if (++dev < link->device + ata_link_max_devices(link))
			goto check;
		return NULL;
	case ATA_DITER_ENABLED_REVERSE:
	case ATA_DITER_ALL_REVERSE:
		if (--dev >= link->device)
			goto check;
		return NULL;
	}

 check:
	if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) &&
	    !ata_dev_enabled(dev))
		goto next;
	return dev;
}

T
Tejun Heo 已提交
284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308
/**
 *	ata_dev_phys_link - find physical link for a device
 *	@dev: ATA device to look up physical link for
 *
 *	Look up physical link which @dev is attached to.  Note that
 *	this is different from @dev->link only when @dev is on slave
 *	link.  For all other cases, it's the same as @dev->link.
 *
 *	LOCKING:
 *	Don't care.
 *
 *	RETURNS:
 *	Pointer to the found physical link.
 */
struct ata_link *ata_dev_phys_link(struct ata_device *dev)
{
	struct ata_port *ap = dev->link->ap;

	if (!ap->slave_link)
		return dev->link;
	if (!dev->devno)
		return &ap->link;
	return ap->slave_link;
}

309 310
/**
 *	ata_force_cbl - force cable type according to libata.force
311
 *	@ap: ATA port of interest
312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342
 *
 *	Force cable type according to libata.force and whine about it.
 *	The last entry which has matching port number is used, so it
 *	can be specified as part of device force parameters.  For
 *	example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the
 *	same effect.
 *
 *	LOCKING:
 *	EH context.
 */
void ata_force_cbl(struct ata_port *ap)
{
	int i;

	for (i = ata_force_tbl_size - 1; i >= 0; i--) {
		const struct ata_force_ent *fe = &ata_force_tbl[i];

		if (fe->port != -1 && fe->port != ap->print_id)
			continue;

		if (fe->param.cbl == ATA_CBL_NONE)
			continue;

		ap->cbl = fe->param.cbl;
		ata_port_printk(ap, KERN_NOTICE,
				"FORCE: cable set to %s\n", fe->param.name);
		return;
	}
}

/**
343
 *	ata_force_link_limits - force link limits according to libata.force
344 345
 *	@link: ATA link of interest
 *
346 347 348 349 350 351
 *	Force link flags and SATA spd limit according to libata.force
 *	and whine about it.  When only the port part is specified
 *	(e.g. 1:), the limit applies to all links connected to both
 *	the host link and all fan-out ports connected via PMP.  If the
 *	device part is specified as 0 (e.g. 1.00:), it specifies the
 *	first fan-out link not the host link.  Device number 15 always
T
Tejun Heo 已提交
352 353
 *	points to the host link whether PMP is attached or not.  If the
 *	controller has slave link, device number 16 points to it.
354 355 356 357
 *
 *	LOCKING:
 *	EH context.
 */
358
static void ata_force_link_limits(struct ata_link *link)
359
{
360
	bool did_spd = false;
T
Tejun Heo 已提交
361 362
	int linkno = link->pmp;
	int i;
363 364

	if (ata_is_host_link(link))
T
Tejun Heo 已提交
365
		linkno += 15;
366 367 368 369 370 371 372 373 374 375

	for (i = ata_force_tbl_size - 1; i >= 0; i--) {
		const struct ata_force_ent *fe = &ata_force_tbl[i];

		if (fe->port != -1 && fe->port != link->ap->print_id)
			continue;

		if (fe->device != -1 && fe->device != linkno)
			continue;

376 377 378 379 380 381 382 383
		/* only honor the first spd limit */
		if (!did_spd && fe->param.spd_limit) {
			link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
			ata_link_printk(link, KERN_NOTICE,
					"FORCE: PHY spd limit set to %s\n",
					fe->param.name);
			did_spd = true;
		}
384

385 386 387 388 389 390 391
		/* let lflags stack */
		if (fe->param.lflags) {
			link->flags |= fe->param.lflags;
			ata_link_printk(link, KERN_NOTICE,
					"FORCE: link flag 0x%x forced -> 0x%x\n",
					fe->param.lflags, link->flags);
		}
392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411
	}
}

/**
 *	ata_force_xfermask - force xfermask according to libata.force
 *	@dev: ATA device of interest
 *
 *	Force xfer_mask according to libata.force and whine about it.
 *	For consistency with link selection, device number 15 selects
 *	the first device connected to the host link.
 *
 *	LOCKING:
 *	EH context.
 */
static void ata_force_xfermask(struct ata_device *dev)
{
	int devno = dev->link->pmp + dev->devno;
	int alt_devno = devno;
	int i;

T
Tejun Heo 已提交
412 413 414
	/* allow n.15/16 for devices attached to host port */
	if (ata_is_host_link(dev->link))
		alt_devno += 15;
415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465

	for (i = ata_force_tbl_size - 1; i >= 0; i--) {
		const struct ata_force_ent *fe = &ata_force_tbl[i];
		unsigned long pio_mask, mwdma_mask, udma_mask;

		if (fe->port != -1 && fe->port != dev->link->ap->print_id)
			continue;

		if (fe->device != -1 && fe->device != devno &&
		    fe->device != alt_devno)
			continue;

		if (!fe->param.xfer_mask)
			continue;

		ata_unpack_xfermask(fe->param.xfer_mask,
				    &pio_mask, &mwdma_mask, &udma_mask);
		if (udma_mask)
			dev->udma_mask = udma_mask;
		else if (mwdma_mask) {
			dev->udma_mask = 0;
			dev->mwdma_mask = mwdma_mask;
		} else {
			dev->udma_mask = 0;
			dev->mwdma_mask = 0;
			dev->pio_mask = pio_mask;
		}

		ata_dev_printk(dev, KERN_NOTICE,
			"FORCE: xfer_mask set to %s\n", fe->param.name);
		return;
	}
}

/**
 *	ata_force_horkage - force horkage according to libata.force
 *	@dev: ATA device of interest
 *
 *	Force horkage according to libata.force and whine about it.
 *	For consistency with link selection, device number 15 selects
 *	the first device connected to the host link.
 *
 *	LOCKING:
 *	EH context.
 */
static void ata_force_horkage(struct ata_device *dev)
{
	int devno = dev->link->pmp + dev->devno;
	int alt_devno = devno;
	int i;

T
Tejun Heo 已提交
466 467 468
	/* allow n.15/16 for devices attached to host port */
	if (ata_is_host_link(dev->link))
		alt_devno += 15;
469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491

	for (i = 0; i < ata_force_tbl_size; i++) {
		const struct ata_force_ent *fe = &ata_force_tbl[i];

		if (fe->port != -1 && fe->port != dev->link->ap->print_id)
			continue;

		if (fe->device != -1 && fe->device != devno &&
		    fe->device != alt_devno)
			continue;

		if (!(~dev->horkage & fe->param.horkage_on) &&
		    !(dev->horkage & fe->param.horkage_off))
			continue;

		dev->horkage |= fe->param.horkage_on;
		dev->horkage &= ~fe->param.horkage_off;

		ata_dev_printk(dev, KERN_NOTICE,
			"FORCE: horkage modified (%s)\n", fe->param.name);
	}
}

T
Tejun Heo 已提交
492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519
/**
 *	atapi_cmd_type - Determine ATAPI command type from SCSI opcode
 *	@opcode: SCSI opcode
 *
 *	Determine ATAPI command type from @opcode.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}
 */
int atapi_cmd_type(u8 opcode)
{
	switch (opcode) {
	case GPCMD_READ_10:
	case GPCMD_READ_12:
		return ATAPI_READ;

	case GPCMD_WRITE_10:
	case GPCMD_WRITE_12:
	case GPCMD_WRITE_AND_VERIFY_10:
		return ATAPI_WRITE;

	case GPCMD_READ_CD:
	case GPCMD_READ_CD_MSF:
		return ATAPI_READ_CD;

520 521 522 523 524
	case ATA_16:
	case ATA_12:
		if (atapi_passthru16)
			return ATAPI_PASS_THRU;
		/* fall thru */
T
Tejun Heo 已提交
525 526 527 528 529
	default:
		return ATAPI_MISC;
	}
}

L
Linus Torvalds 已提交
530 531 532 533
/**
 *	ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
 *	@tf: Taskfile to convert
 *	@pmp: Port multiplier port
534 535
 *	@is_cmd: This FIS is for command
 *	@fis: Buffer into which data will output
L
Linus Torvalds 已提交
536 537 538 539 540 541 542
 *
 *	Converts a standard ATA taskfile to a Serial ATA
 *	FIS structure (Register - Host to Device).
 *
 *	LOCKING:
 *	Inherited from caller.
 */
543
void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis)
L
Linus Torvalds 已提交
544
{
545 546 547 548 549
	fis[0] = 0x27;			/* Register - Host to Device FIS */
	fis[1] = pmp & 0xf;		/* Port multiplier number*/
	if (is_cmd)
		fis[1] |= (1 << 7);	/* bit 7 indicates Command FIS */

L
Linus Torvalds 已提交
550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578
	fis[2] = tf->command;
	fis[3] = tf->feature;

	fis[4] = tf->lbal;
	fis[5] = tf->lbam;
	fis[6] = tf->lbah;
	fis[7] = tf->device;

	fis[8] = tf->hob_lbal;
	fis[9] = tf->hob_lbam;
	fis[10] = tf->hob_lbah;
	fis[11] = tf->hob_feature;

	fis[12] = tf->nsect;
	fis[13] = tf->hob_nsect;
	fis[14] = 0;
	fis[15] = tf->ctl;

	fis[16] = 0;
	fis[17] = 0;
	fis[18] = 0;
	fis[19] = 0;
}

/**
 *	ata_tf_from_fis - Convert SATA FIS to ATA taskfile
 *	@fis: Buffer from which data will be input
 *	@tf: Taskfile to output
 *
579
 *	Converts a serial ATA FIS structure to a standard ATA taskfile.
L
Linus Torvalds 已提交
580 581 582 583 584
 *
 *	LOCKING:
 *	Inherited from caller.
 */

J
Jeff Garzik 已提交
585
void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
L
Linus Torvalds 已提交
586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602
{
	tf->command	= fis[2];	/* status */
	tf->feature	= fis[3];	/* error */

	tf->lbal	= fis[4];
	tf->lbam	= fis[5];
	tf->lbah	= fis[6];
	tf->device	= fis[7];

	tf->hob_lbal	= fis[8];
	tf->hob_lbam	= fis[9];
	tf->hob_lbah	= fis[10];

	tf->nsect	= fis[12];
	tf->hob_nsect	= fis[13];
}

603 604 605 606 607 608
static const u8 ata_rw_cmds[] = {
	/* pio multi */
	ATA_CMD_READ_MULTI,
	ATA_CMD_WRITE_MULTI,
	ATA_CMD_READ_MULTI_EXT,
	ATA_CMD_WRITE_MULTI_EXT,
T
Tejun Heo 已提交
609 610 611 612
	0,
	0,
	0,
	ATA_CMD_WRITE_MULTI_FUA_EXT,
613 614 615 616 617
	/* pio */
	ATA_CMD_PIO_READ,
	ATA_CMD_PIO_WRITE,
	ATA_CMD_PIO_READ_EXT,
	ATA_CMD_PIO_WRITE_EXT,
T
Tejun Heo 已提交
618 619 620 621
	0,
	0,
	0,
	0,
622 623 624 625
	/* dma */
	ATA_CMD_READ,
	ATA_CMD_WRITE,
	ATA_CMD_READ_EXT,
T
Tejun Heo 已提交
626 627 628 629 630
	ATA_CMD_WRITE_EXT,
	0,
	0,
	0,
	ATA_CMD_WRITE_FUA_EXT
631
};
L
Linus Torvalds 已提交
632 633

/**
634
 *	ata_rwcmd_protocol - set taskfile r/w commands and protocol
635 636
 *	@tf: command to examine and configure
 *	@dev: device tf belongs to
L
Linus Torvalds 已提交
637
 *
638
 *	Examine the device configuration and tf->flags to calculate
639
 *	the proper read/write commands and protocol to use.
L
Linus Torvalds 已提交
640 641 642 643
 *
 *	LOCKING:
 *	caller.
 */
644
static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
L
Linus Torvalds 已提交
645
{
T
Tejun Heo 已提交
646
	u8 cmd;
L
Linus Torvalds 已提交
647

T
Tejun Heo 已提交
648
	int index, fua, lba48, write;
649

T
Tejun Heo 已提交
650
	fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0;
651 652
	lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
	write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
L
Linus Torvalds 已提交
653

654 655
	if (dev->flags & ATA_DFLAG_PIO) {
		tf->protocol = ATA_PROT_PIO;
T
Tejun Heo 已提交
656
		index = dev->multi_count ? 0 : 8;
T
Tejun Heo 已提交
657
	} else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) {
658 659
		/* Unable to use DMA due to host limitation */
		tf->protocol = ATA_PROT_PIO;
660
		index = dev->multi_count ? 0 : 8;
661 662
	} else {
		tf->protocol = ATA_PROT_DMA;
T
Tejun Heo 已提交
663
		index = 16;
664
	}
L
Linus Torvalds 已提交
665

T
Tejun Heo 已提交
666 667 668 669 670 671
	cmd = ata_rw_cmds[index + fua + lba48 + write];
	if (cmd) {
		tf->command = cmd;
		return 0;
	}
	return -1;
L
Linus Torvalds 已提交
672 673
}

674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696
/**
 *	ata_tf_read_block - Read block address from ATA taskfile
 *	@tf: ATA taskfile of interest
 *	@dev: ATA device @tf belongs to
 *
 *	LOCKING:
 *	None.
 *
 *	Read block address from @tf.  This function can handle all
 *	three address formats - LBA, LBA48 and CHS.  tf->protocol and
 *	flags select the address format to use.
 *
 *	RETURNS:
 *	Block address read from @tf.
 */
u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
{
	u64 block = 0;

	if (tf->flags & ATA_TFLAG_LBA) {
		if (tf->flags & ATA_TFLAG_LBA48) {
			block |= (u64)tf->hob_lbah << 40;
			block |= (u64)tf->hob_lbam << 32;
697
			block |= (u64)tf->hob_lbal << 24;
698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716
		} else
			block |= (tf->device & 0xf) << 24;

		block |= tf->lbah << 16;
		block |= tf->lbam << 8;
		block |= tf->lbal;
	} else {
		u32 cyl, head, sect;

		cyl = tf->lbam | (tf->lbah << 8);
		head = tf->device & 0xf;
		sect = tf->lbal;

		block = (cyl * dev->heads + head) * dev->sectors + sect;
	}

	return block;
}

717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743
/**
 *	ata_build_rw_tf - Build ATA taskfile for given read/write request
 *	@tf: Target ATA taskfile
 *	@dev: ATA device @tf belongs to
 *	@block: Block address
 *	@n_block: Number of blocks
 *	@tf_flags: RW/FUA etc...
 *	@tag: tag
 *
 *	LOCKING:
 *	None.
 *
 *	Build ATA taskfile @tf for read/write request described by
 *	@block, @n_block, @tf_flags and @tag on @dev.
 *
 *	RETURNS:
 *
 *	0 on success, -ERANGE if the request is too large for @dev,
 *	-EINVAL if the request is invalid.
 */
int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
		    u64 block, u32 n_block, unsigned int tf_flags,
		    unsigned int tag)
{
	tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
	tf->flags |= tf_flags;

744
	if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) {
745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839
		/* yay, NCQ */
		if (!lba_48_ok(block, n_block))
			return -ERANGE;

		tf->protocol = ATA_PROT_NCQ;
		tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;

		if (tf->flags & ATA_TFLAG_WRITE)
			tf->command = ATA_CMD_FPDMA_WRITE;
		else
			tf->command = ATA_CMD_FPDMA_READ;

		tf->nsect = tag << 3;
		tf->hob_feature = (n_block >> 8) & 0xff;
		tf->feature = n_block & 0xff;

		tf->hob_lbah = (block >> 40) & 0xff;
		tf->hob_lbam = (block >> 32) & 0xff;
		tf->hob_lbal = (block >> 24) & 0xff;
		tf->lbah = (block >> 16) & 0xff;
		tf->lbam = (block >> 8) & 0xff;
		tf->lbal = block & 0xff;

		tf->device = 1 << 6;
		if (tf->flags & ATA_TFLAG_FUA)
			tf->device |= 1 << 7;
	} else if (dev->flags & ATA_DFLAG_LBA) {
		tf->flags |= ATA_TFLAG_LBA;

		if (lba_28_ok(block, n_block)) {
			/* use LBA28 */
			tf->device |= (block >> 24) & 0xf;
		} else if (lba_48_ok(block, n_block)) {
			if (!(dev->flags & ATA_DFLAG_LBA48))
				return -ERANGE;

			/* use LBA48 */
			tf->flags |= ATA_TFLAG_LBA48;

			tf->hob_nsect = (n_block >> 8) & 0xff;

			tf->hob_lbah = (block >> 40) & 0xff;
			tf->hob_lbam = (block >> 32) & 0xff;
			tf->hob_lbal = (block >> 24) & 0xff;
		} else
			/* request too large even for LBA48 */
			return -ERANGE;

		if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
			return -EINVAL;

		tf->nsect = n_block & 0xff;

		tf->lbah = (block >> 16) & 0xff;
		tf->lbam = (block >> 8) & 0xff;
		tf->lbal = block & 0xff;

		tf->device |= ATA_LBA;
	} else {
		/* CHS */
		u32 sect, head, cyl, track;

		/* The request -may- be too large for CHS addressing. */
		if (!lba_28_ok(block, n_block))
			return -ERANGE;

		if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
			return -EINVAL;

		/* Convert LBA to CHS */
		track = (u32)block / dev->sectors;
		cyl   = track / dev->heads;
		head  = track % dev->heads;
		sect  = (u32)block % dev->sectors + 1;

		DPRINTK("block %u track %u cyl %u head %u sect %u\n",
			(u32)block, track, cyl, head, sect);

		/* Check whether the converted CHS can fit.
		   Cylinder: 0-65535
		   Head: 0-15
		   Sector: 1-255*/
		if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
			return -ERANGE;

		tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
		tf->lbal = sect;
		tf->lbam = cyl;
		tf->lbah = cyl >> 8;
		tf->device |= head;
	}

	return 0;
}

840 841 842 843 844 845 846 847 848 849 850 851 852 853 854
/**
 *	ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask
 *	@pio_mask: pio_mask
 *	@mwdma_mask: mwdma_mask
 *	@udma_mask: udma_mask
 *
 *	Pack @pio_mask, @mwdma_mask and @udma_mask into a single
 *	unsigned int xfer_mask.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	Packed xfer_mask.
 */
855 856 857
unsigned long ata_pack_xfermask(unsigned long pio_mask,
				unsigned long mwdma_mask,
				unsigned long udma_mask)
858 859 860 861 862 863
{
	return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) |
		((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) |
		((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA);
}

864 865 866 867 868 869 870 871 872 873
/**
 *	ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks
 *	@xfer_mask: xfer_mask to unpack
 *	@pio_mask: resulting pio_mask
 *	@mwdma_mask: resulting mwdma_mask
 *	@udma_mask: resulting udma_mask
 *
 *	Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask.
 *	Any NULL distination masks will be ignored.
 */
874 875
void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask,
			 unsigned long *mwdma_mask, unsigned long *udma_mask)
876 877 878 879 880 881 882 883 884
{
	if (pio_mask)
		*pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO;
	if (mwdma_mask)
		*mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA;
	if (udma_mask)
		*udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA;
}

885
static const struct ata_xfer_ent {
886
	int shift, bits;
887 888
	u8 base;
} ata_xfer_tbl[] = {
889 890 891
	{ ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 },
	{ ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 },
	{ ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 },
892 893 894 895 896 897 898 899 900 901 902 903 904 905
	{ -1, },
};

/**
 *	ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask
 *	@xfer_mask: xfer_mask of interest
 *
 *	Return matching XFER_* value for @xfer_mask.  Only the highest
 *	bit of @xfer_mask is considered.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
906
 *	Matching XFER_* value, 0xff if no match found.
907
 */
908
u8 ata_xfer_mask2mode(unsigned long xfer_mask)
909 910 911 912 913 914 915
{
	int highbit = fls(xfer_mask) - 1;
	const struct ata_xfer_ent *ent;

	for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
		if (highbit >= ent->shift && highbit < ent->shift + ent->bits)
			return ent->base + highbit - ent->shift;
916
	return 0xff;
917 918 919 920 921 922 923 924 925 926 927 928 929 930
}

/**
 *	ata_xfer_mode2mask - Find matching xfer_mask for XFER_*
 *	@xfer_mode: XFER_* of interest
 *
 *	Return matching xfer_mask for @xfer_mode.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	Matching xfer_mask, 0 if no match found.
 */
931
unsigned long ata_xfer_mode2mask(u8 xfer_mode)
932 933 934 935 936
{
	const struct ata_xfer_ent *ent;

	for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
		if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
937 938
			return ((2 << (ent->shift + xfer_mode - ent->base)) - 1)
				& ~((1 << ent->shift) - 1);
939 940 941 942 943 944 945 946 947 948 949 950 951 952 953
	return 0;
}

/**
 *	ata_xfer_mode2shift - Find matching xfer_shift for XFER_*
 *	@xfer_mode: XFER_* of interest
 *
 *	Return matching xfer_shift for @xfer_mode.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	Matching xfer_shift, -1 if no match found.
 */
954
int ata_xfer_mode2shift(unsigned long xfer_mode)
955 956 957 958 959 960 961 962 963
{
	const struct ata_xfer_ent *ent;

	for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
		if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
			return ent->shift;
	return -1;
}

L
Linus Torvalds 已提交
964
/**
965 966
 *	ata_mode_string - convert xfer_mask to string
 *	@xfer_mask: mask of bits supported; only highest bit counts.
L
Linus Torvalds 已提交
967 968
 *
 *	Determine string which represents the highest speed
969
 *	(highest bit in @modemask).
L
Linus Torvalds 已提交
970 971 972 973 974 975
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	Constant C string representing highest speed listed in
976
 *	@mode_mask, or the constant C string "<n/a>".
L
Linus Torvalds 已提交
977
 */
978
const char *ata_mode_string(unsigned long xfer_mask)
L
Linus Torvalds 已提交
979
{
980 981 982 983 984 985
	static const char * const xfer_mode_str[] = {
		"PIO0",
		"PIO1",
		"PIO2",
		"PIO3",
		"PIO4",
986 987
		"PIO5",
		"PIO6",
988 989 990
		"MWDMA0",
		"MWDMA1",
		"MWDMA2",
991 992
		"MWDMA3",
		"MWDMA4",
993 994 995 996 997 998 999 1000 1001
		"UDMA/16",
		"UDMA/25",
		"UDMA/33",
		"UDMA/44",
		"UDMA/66",
		"UDMA/100",
		"UDMA/133",
		"UDMA7",
	};
1002
	int highbit;
L
Linus Torvalds 已提交
1003

1004 1005 1006
	highbit = fls(xfer_mask) - 1;
	if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str))
		return xfer_mode_str[highbit];
L
Linus Torvalds 已提交
1007 1008 1009
	return "<n/a>";
}

1010 1011 1012 1013 1014
static const char *sata_spd_string(unsigned int spd)
{
	static const char * const spd_str[] = {
		"1.5 Gbps",
		"3.0 Gbps",
1015
		"6.0 Gbps",
1016 1017 1018 1019 1020 1021 1022
	};

	if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str))
		return "<unknown>";
	return spd_str[spd - 1];
}

1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078
static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
{
	struct ata_link *link = dev->link;
	struct ata_port *ap = link->ap;
	u32 scontrol;
	unsigned int err_mask;
	int rc;

	/*
	 * disallow DIPM for drivers which haven't set
	 * ATA_FLAG_IPM.  This is because when DIPM is enabled,
	 * phy ready will be set in the interrupt status on
	 * state changes, which will cause some drivers to
	 * think there are errors - additionally drivers will
	 * need to disable hot plug.
	 */
	if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) {
		ap->pm_policy = NOT_AVAILABLE;
		return -EINVAL;
	}

	/*
	 * For DIPM, we will only enable it for the
	 * min_power setting.
	 *
	 * Why?  Because Disks are too stupid to know that
	 * If the host rejects a request to go to SLUMBER
	 * they should retry at PARTIAL, and instead it
	 * just would give up.  So, for medium_power to
	 * work at all, we need to only allow HIPM.
	 */
	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
	if (rc)
		return rc;

	switch (policy) {
	case MIN_POWER:
		/* no restrictions on IPM transitions */
		scontrol &= ~(0x3 << 8);
		rc = sata_scr_write(link, SCR_CONTROL, scontrol);
		if (rc)
			return rc;

		/* enable DIPM */
		if (dev->flags & ATA_DFLAG_DIPM)
			err_mask = ata_dev_set_feature(dev,
					SETFEATURES_SATA_ENABLE, SATA_DIPM);
		break;
	case MEDIUM_POWER:
		/* allow IPM to PARTIAL */
		scontrol &= ~(0x1 << 8);
		scontrol |= (0x2 << 8);
		rc = sata_scr_write(link, SCR_CONTROL, scontrol);
		if (rc)
			return rc;

1079 1080 1081 1082 1083
		/*
		 * we don't have to disable DIPM since IPM flags
		 * disallow transitions to SLUMBER, which effectively
		 * disable DIPM if it does not support PARTIAL
		 */
1084 1085 1086 1087 1088 1089 1090 1091 1092
		break;
	case NOT_AVAILABLE:
	case MAX_PERFORMANCE:
		/* disable all IPM transitions */
		scontrol |= (0x3 << 8);
		rc = sata_scr_write(link, SCR_CONTROL, scontrol);
		if (rc)
			return rc;

1093 1094 1095 1096 1097
		/*
		 * we don't have to disable DIPM since IPM flags
		 * disallow all transitions which effectively
		 * disable DIPM anyway.
		 */
1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108
		break;
	}

	/* FIXME: handle SET FEATURES failure */
	(void) err_mask;

	return 0;
}

/**
 *	ata_dev_enable_pm - enable SATA interface power management
S
Stephen Hemminger 已提交
1109 1110
 *	@dev:  device to enable power management
 *	@policy: the link power management policy
1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139
 *
 *	Enable SATA Interface power management.  This will enable
 *	Device Interface Power Management (DIPM) for min_power
 * 	policy, and then call driver specific callbacks for
 *	enabling Host Initiated Power management.
 *
 *	Locking: Caller.
 *	Returns: -EINVAL if IPM is not supported, 0 otherwise.
 */
void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy)
{
	int rc = 0;
	struct ata_port *ap = dev->link->ap;

	/* set HIPM first, then DIPM */
	if (ap->ops->enable_pm)
		rc = ap->ops->enable_pm(ap, policy);
	if (rc)
		goto enable_pm_out;
	rc = ata_dev_set_dipm(dev, policy);

enable_pm_out:
	if (rc)
		ap->pm_policy = MAX_PERFORMANCE;
	else
		ap->pm_policy = policy;
	return /* rc */;	/* hopefully we can use 'rc' eventually */
}

S
Stephen Rothwell 已提交
1140
#ifdef CONFIG_PM
1141 1142
/**
 *	ata_dev_disable_pm - disable SATA interface power management
S
Stephen Hemminger 已提交
1143
 *	@dev: device to disable power management
1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160
 *
 *	Disable SATA Interface power management.  This will disable
 *	Device Interface Power Management (DIPM) without changing
 * 	policy,  call driver specific callbacks for disabling Host
 * 	Initiated Power management.
 *
 *	Locking: Caller.
 *	Returns: void
 */
static void ata_dev_disable_pm(struct ata_device *dev)
{
	struct ata_port *ap = dev->link->ap;

	ata_dev_set_dipm(dev, MAX_PERFORMANCE);
	if (ap->ops->disable_pm)
		ap->ops->disable_pm(ap);
}
S
Stephen Rothwell 已提交
1161
#endif	/* CONFIG_PM */
1162 1163 1164 1165

void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
{
	ap->pm_policy = policy;
1166
	ap->link.eh_info.action |= ATA_EH_LPM;
1167 1168 1169 1170
	ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
	ata_port_schedule_eh(ap);
}

S
Stephen Rothwell 已提交
1171
#ifdef CONFIG_PM
1172 1173 1174 1175 1176 1177 1178 1179 1180
static void ata_lpm_enable(struct ata_host *host)
{
	struct ata_link *link;
	struct ata_port *ap;
	struct ata_device *dev;
	int i;

	for (i = 0; i < host->n_ports; i++) {
		ap = host->ports[i];
T
Tejun Heo 已提交
1181 1182
		ata_for_each_link(link, ap, EDGE) {
			ata_for_each_dev(dev, link, ALL)
1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196
				ata_dev_disable_pm(dev);
		}
	}
}

static void ata_lpm_disable(struct ata_host *host)
{
	int i;

	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];
		ata_lpm_schedule(ap, ap->pm_policy);
	}
}
S
Stephen Rothwell 已提交
1197
#endif	/* CONFIG_PM */
1198

L
Linus Torvalds 已提交
1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210
/**
 *	ata_dev_classify - determine device type based on ATA-spec signature
 *	@tf: ATA taskfile register set for device to be identified
 *
 *	Determine from taskfile register contents whether a device is
 *	ATA or ATAPI, as per "Signature and persistence" section
 *	of ATA/PI spec (volume 1, sect 5.14).
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
1211 1212
 *	Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP or
 *	%ATA_DEV_UNKNOWN the event of failure.
L
Linus Torvalds 已提交
1213
 */
J
Jeff Garzik 已提交
1214
unsigned int ata_dev_classify(const struct ata_taskfile *tf)
L
Linus Torvalds 已提交
1215 1216 1217 1218
{
	/* Apple's open source Darwin code hints that some devices only
	 * put a proper signature into the LBA mid/high registers,
	 * So, we only check those.  It's sufficient for uniqueness.
1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232
	 *
	 * ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate
	 * signatures for ATA and ATAPI devices attached on SerialATA,
	 * 0x3c/0xc3 and 0x69/0x96 respectively.  However, SerialATA
	 * spec has never mentioned about using different signatures
	 * for ATA/ATAPI devices.  Then, Serial ATA II: Port
	 * Multiplier specification began to use 0x69/0x96 to identify
	 * port multpliers and 0x3c/0xc3 to identify SEMB device.
	 * ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and
	 * 0x69/0x96 shortly and described them as reserved for
	 * SerialATA.
	 *
	 * We follow the current spec and consider that 0x69/0x96
	 * identifies a port multiplier and 0x3c/0xc3 a SEMB device.
L
Linus Torvalds 已提交
1233
	 */
1234
	if ((tf->lbam == 0) && (tf->lbah == 0)) {
L
Linus Torvalds 已提交
1235 1236 1237 1238
		DPRINTK("found ATA device by sig\n");
		return ATA_DEV_ATA;
	}

1239
	if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) {
L
Linus Torvalds 已提交
1240 1241 1242 1243
		DPRINTK("found ATAPI device by sig\n");
		return ATA_DEV_ATAPI;
	}

1244 1245 1246 1247 1248 1249
	if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) {
		DPRINTK("found PMP device by sig\n");
		return ATA_DEV_PMP;
	}

	if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
1250
		printk(KERN_INFO "ata: SEMB device ignored\n");
1251 1252 1253
		return ATA_DEV_SEMB_UNSUP; /* not yet */
	}

L
Linus Torvalds 已提交
1254 1255 1256 1257 1258
	DPRINTK("unknown device\n");
	return ATA_DEV_UNKNOWN;
}

/**
1259
 *	ata_id_string - Convert IDENTIFY DEVICE page into string
L
Linus Torvalds 已提交
1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272
 *	@id: IDENTIFY DEVICE results we will examine
 *	@s: string into which data is output
 *	@ofs: offset into identify device page
 *	@len: length of string to return. must be an even number.
 *
 *	The strings in the IDENTIFY DEVICE page are broken up into
 *	16-bit chunks.  Run through the string, and output each
 *	8-bit chunk linearly, regardless of platform.
 *
 *	LOCKING:
 *	caller.
 */

1273 1274
void ata_id_string(const u16 *id, unsigned char *s,
		   unsigned int ofs, unsigned int len)
L
Linus Torvalds 已提交
1275 1276 1277
{
	unsigned int c;

1278 1279
	BUG_ON(len & 1);

L
Linus Torvalds 已提交
1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293
	while (len > 0) {
		c = id[ofs] >> 8;
		*s = c;
		s++;

		c = id[ofs] & 0xff;
		*s = c;
		s++;

		ofs++;
		len -= 2;
	}
}

1294
/**
1295
 *	ata_id_c_string - Convert IDENTIFY DEVICE page into C string
1296 1297 1298 1299 1300
 *	@id: IDENTIFY DEVICE results we will examine
 *	@s: string into which data is output
 *	@ofs: offset into identify device page
 *	@len: length of string to return. must be an odd number.
 *
1301
 *	This function is identical to ata_id_string except that it
1302 1303 1304 1305 1306 1307
 *	trims trailing spaces and terminates the resulting string with
 *	null.  @len must be actual maximum length (even number) + 1.
 *
 *	LOCKING:
 *	caller.
 */
1308 1309
void ata_id_c_string(const u16 *id, unsigned char *s,
		     unsigned int ofs, unsigned int len)
1310 1311 1312
{
	unsigned char *p;

1313
	ata_id_string(id, s, ofs, len - 1);
1314 1315 1316 1317 1318 1319

	p = s + strnlen(s, len - 1);
	while (p > s && p[-1] == ' ')
		p--;
	*p = '\0';
}
E
Edward Falk 已提交
1320

T
Tejun Heo 已提交
1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335
static u64 ata_id_n_sectors(const u16 *id)
{
	if (ata_id_has_lba(id)) {
		if (ata_id_has_lba48(id))
			return ata_id_u64(id, 100);
		else
			return ata_id_u32(id, 60);
	} else {
		if (ata_id_current_chs_valid(id))
			return ata_id_u32(id, 57);
		else
			return id[1] * id[3] * id[6];
	}
}

1336
u64 ata_tf_to_lba48(const struct ata_taskfile *tf)
A
Alan Cox 已提交
1337 1338 1339 1340 1341
{
	u64 sectors = 0;

	sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
	sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
1342
	sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
A
Alan Cox 已提交
1343 1344 1345 1346
	sectors |= (tf->lbah & 0xff) << 16;
	sectors |= (tf->lbam & 0xff) << 8;
	sectors |= (tf->lbal & 0xff);

1347
	return sectors;
A
Alan Cox 已提交
1348 1349
}

1350
u64 ata_tf_to_lba(const struct ata_taskfile *tf)
A
Alan Cox 已提交
1351 1352 1353 1354 1355 1356 1357 1358
{
	u64 sectors = 0;

	sectors |= (tf->device & 0x0f) << 24;
	sectors |= (tf->lbah & 0xff) << 16;
	sectors |= (tf->lbam & 0xff) << 8;
	sectors |= (tf->lbal & 0xff);

1359
	return sectors;
A
Alan Cox 已提交
1360 1361 1362
}

/**
1363 1364 1365
 *	ata_read_native_max_address - Read native max address
 *	@dev: target device
 *	@max_sectors: out parameter for the result native max address
A
Alan Cox 已提交
1366
 *
1367 1368
 *	Perform an LBA48 or LBA28 native size query upon the device in
 *	question.
A
Alan Cox 已提交
1369
 *
1370 1371 1372
 *	RETURNS:
 *	0 on success, -EACCES if command is aborted by the drive.
 *	-EIO on other errors.
A
Alan Cox 已提交
1373
 */
1374
static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors)
A
Alan Cox 已提交
1375
{
1376
	unsigned int err_mask;
A
Alan Cox 已提交
1377
	struct ata_taskfile tf;
1378
	int lba48 = ata_id_has_lba48(dev->id);
A
Alan Cox 已提交
1379 1380 1381

	ata_tf_init(dev, &tf);

1382
	/* always clear all address registers */
A
Alan Cox 已提交
1383 1384
	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;

1385 1386 1387 1388 1389
	if (lba48) {
		tf.command = ATA_CMD_READ_NATIVE_MAX_EXT;
		tf.flags |= ATA_TFLAG_LBA48;
	} else
		tf.command = ATA_CMD_READ_NATIVE_MAX;
A
Alan Cox 已提交
1390 1391

	tf.protocol |= ATA_PROT_NODATA;
1392 1393
	tf.device |= ATA_LBA;

1394
	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1395 1396 1397 1398 1399 1400 1401
	if (err_mask) {
		ata_dev_printk(dev, KERN_WARNING, "failed to read native "
			       "max address (err_mask=0x%x)\n", err_mask);
		if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
			return -EACCES;
		return -EIO;
	}
A
Alan Cox 已提交
1402

1403
	if (lba48)
1404
		*max_sectors = ata_tf_to_lba48(&tf) + 1;
1405
	else
1406
		*max_sectors = ata_tf_to_lba(&tf) + 1;
1407
	if (dev->horkage & ATA_HORKAGE_HPA_SIZE)
1408
		(*max_sectors)--;
1409
	return 0;
A
Alan Cox 已提交
1410 1411 1412
}

/**
1413 1414
 *	ata_set_max_sectors - Set max sectors
 *	@dev: target device
R
Randy Dunlap 已提交
1415
 *	@new_sectors: new max sectors value to set for the device
A
Alan Cox 已提交
1416
 *
1417 1418 1419 1420 1421 1422
 *	Set max sectors of @dev to @new_sectors.
 *
 *	RETURNS:
 *	0 on success, -EACCES if command is aborted or denied (due to
 *	previous non-volatile SET_MAX) by the drive.  -EIO on other
 *	errors.
A
Alan Cox 已提交
1423
 */
T
Tejun Heo 已提交
1424
static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors)
A
Alan Cox 已提交
1425
{
1426
	unsigned int err_mask;
A
Alan Cox 已提交
1427
	struct ata_taskfile tf;
1428
	int lba48 = ata_id_has_lba48(dev->id);
A
Alan Cox 已提交
1429 1430 1431 1432 1433 1434

	new_sectors--;

	ata_tf_init(dev, &tf);

	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
1435 1436 1437 1438 1439 1440 1441 1442

	if (lba48) {
		tf.command = ATA_CMD_SET_MAX_EXT;
		tf.flags |= ATA_TFLAG_LBA48;

		tf.hob_lbal = (new_sectors >> 24) & 0xff;
		tf.hob_lbam = (new_sectors >> 32) & 0xff;
		tf.hob_lbah = (new_sectors >> 40) & 0xff;
T
Tejun Heo 已提交
1443
	} else {
1444 1445
		tf.command = ATA_CMD_SET_MAX;

T
Tejun Heo 已提交
1446 1447 1448
		tf.device |= (new_sectors >> 24) & 0xf;
	}

A
Alan Cox 已提交
1449
	tf.protocol |= ATA_PROT_NODATA;
1450
	tf.device |= ATA_LBA;
A
Alan Cox 已提交
1451 1452 1453 1454 1455

	tf.lbal = (new_sectors >> 0) & 0xff;
	tf.lbam = (new_sectors >> 8) & 0xff;
	tf.lbah = (new_sectors >> 16) & 0xff;

1456
	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1457 1458 1459 1460 1461 1462 1463 1464 1465 1466
	if (err_mask) {
		ata_dev_printk(dev, KERN_WARNING, "failed to set "
			       "max address (err_mask=0x%x)\n", err_mask);
		if (err_mask == AC_ERR_DEV &&
		    (tf.feature & (ATA_ABORTED | ATA_IDNF)))
			return -EACCES;
		return -EIO;
	}

	return 0;
A
Alan Cox 已提交
1467 1468 1469 1470 1471 1472 1473 1474 1475
}

/**
 *	ata_hpa_resize		-	Resize a device with an HPA set
 *	@dev: Device to resize
 *
 *	Read the size of an LBA28 or LBA48 disk with HPA features and resize
 *	it if required to the full size of the media. The caller must check
 *	the drive has the HPA feature set enabled.
T
Tejun Heo 已提交
1476 1477 1478
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
A
Alan Cox 已提交
1479
 */
T
Tejun Heo 已提交
1480
static int ata_hpa_resize(struct ata_device *dev)
A
Alan Cox 已提交
1481
{
T
Tejun Heo 已提交
1482 1483 1484 1485
	struct ata_eh_context *ehc = &dev->link->eh_context;
	int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
	u64 sectors = ata_id_n_sectors(dev->id);
	u64 native_sectors;
1486
	int rc;
J
Jeff Garzik 已提交
1487

T
Tejun Heo 已提交
1488 1489 1490 1491
	/* do we need to do it? */
	if (dev->class != ATA_DEV_ATA ||
	    !ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) ||
	    (dev->horkage & ATA_HORKAGE_BROKEN_HPA))
1492
		return 0;
A
Alan Cox 已提交
1493

T
Tejun Heo 已提交
1494 1495 1496
	/* read native max address */
	rc = ata_read_native_max_address(dev, &native_sectors);
	if (rc) {
T
Tejun Heo 已提交
1497 1498
		/* If device aborted the command or HPA isn't going to
		 * be unlocked, skip HPA resizing.
T
Tejun Heo 已提交
1499
		 */
T
Tejun Heo 已提交
1500
		if (rc == -EACCES || !ata_ignore_hpa) {
T
Tejun Heo 已提交
1501
			ata_dev_printk(dev, KERN_WARNING, "HPA support seems "
T
Tejun Heo 已提交
1502
				       "broken, skipping HPA handling\n");
T
Tejun Heo 已提交
1503 1504 1505 1506 1507
			dev->horkage |= ATA_HORKAGE_BROKEN_HPA;

			/* we can continue if device aborted the command */
			if (rc == -EACCES)
				rc = 0;
A
Alan Cox 已提交
1508
		}
T
Tejun Heo 已提交
1509

T
Tejun Heo 已提交
1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562
		return rc;
	}

	/* nothing to do? */
	if (native_sectors <= sectors || !ata_ignore_hpa) {
		if (!print_info || native_sectors == sectors)
			return 0;

		if (native_sectors > sectors)
			ata_dev_printk(dev, KERN_INFO,
				"HPA detected: current %llu, native %llu\n",
				(unsigned long long)sectors,
				(unsigned long long)native_sectors);
		else if (native_sectors < sectors)
			ata_dev_printk(dev, KERN_WARNING,
				"native sectors (%llu) is smaller than "
				"sectors (%llu)\n",
				(unsigned long long)native_sectors,
				(unsigned long long)sectors);
		return 0;
	}

	/* let's unlock HPA */
	rc = ata_set_max_sectors(dev, native_sectors);
	if (rc == -EACCES) {
		/* if device aborted the command, skip HPA resizing */
		ata_dev_printk(dev, KERN_WARNING, "device aborted resize "
			       "(%llu -> %llu), skipping HPA handling\n",
			       (unsigned long long)sectors,
			       (unsigned long long)native_sectors);
		dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
		return 0;
	} else if (rc)
		return rc;

	/* re-read IDENTIFY data */
	rc = ata_dev_reread_id(dev, 0);
	if (rc) {
		ata_dev_printk(dev, KERN_ERR, "failed to re-read IDENTIFY "
			       "data after HPA resizing\n");
		return rc;
	}

	if (print_info) {
		u64 new_sectors = ata_id_n_sectors(dev->id);
		ata_dev_printk(dev, KERN_INFO,
			"HPA unlocked: %llu -> %llu, native %llu\n",
			(unsigned long long)sectors,
			(unsigned long long)new_sectors,
			(unsigned long long)native_sectors);
	}

	return 0;
A
Alan Cox 已提交
1563 1564
}

L
Linus Torvalds 已提交
1565 1566
/**
 *	ata_dump_id - IDENTIFY DEVICE info debugging output
1567
 *	@id: IDENTIFY DEVICE page to dump
L
Linus Torvalds 已提交
1568
 *
1569 1570
 *	Dump selected 16-bit words from the given IDENTIFY DEVICE
 *	page.
L
Linus Torvalds 已提交
1571 1572 1573 1574 1575
 *
 *	LOCKING:
 *	caller.
 */

1576
static inline void ata_dump_id(const u16 *id)
L
Linus Torvalds 已提交
1577 1578 1579 1580 1581 1582
{
	DPRINTK("49==0x%04x  "
		"53==0x%04x  "
		"63==0x%04x  "
		"64==0x%04x  "
		"75==0x%04x  \n",
1583 1584 1585 1586 1587
		id[49],
		id[53],
		id[63],
		id[64],
		id[75]);
L
Linus Torvalds 已提交
1588 1589 1590 1591 1592
	DPRINTK("80==0x%04x  "
		"81==0x%04x  "
		"82==0x%04x  "
		"83==0x%04x  "
		"84==0x%04x  \n",
1593 1594 1595 1596 1597
		id[80],
		id[81],
		id[82],
		id[83],
		id[84]);
L
Linus Torvalds 已提交
1598 1599
	DPRINTK("88==0x%04x  "
		"93==0x%04x\n",
1600 1601
		id[88],
		id[93]);
L
Linus Torvalds 已提交
1602 1603
}

1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618
/**
 *	ata_id_xfermask - Compute xfermask from the given IDENTIFY data
 *	@id: IDENTIFY data to compute xfer mask from
 *
 *	Compute the xfermask for this device. This is not as trivial
 *	as it seems if we must consider early devices correctly.
 *
 *	FIXME: pre IDE drive timing (do we care ?).
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	Computed xfermask
 */
1619
unsigned long ata_id_xfermask(const u16 *id)
1620
{
1621
	unsigned long pio_mask, mwdma_mask, udma_mask;
1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632

	/* Usual case. Word 53 indicates word 64 is valid */
	if (id[ATA_ID_FIELD_VALID] & (1 << 1)) {
		pio_mask = id[ATA_ID_PIO_MODES] & 0x03;
		pio_mask <<= 3;
		pio_mask |= 0x7;
	} else {
		/* If word 64 isn't valid then Word 51 high byte holds
		 * the PIO timing number for the maximum. Turn it into
		 * a mask.
		 */
1633
		u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF;
1634
		if (mode < 5)	/* Valid PIO range */
1635
			pio_mask = (2 << mode) - 1;
1636 1637
		else
			pio_mask = 1;
1638 1639 1640 1641 1642 1643 1644 1645 1646 1647

		/* But wait.. there's more. Design your standards by
		 * committee and you too can get a free iordy field to
		 * process. However its the speeds not the modes that
		 * are supported... Note drivers using the timing API
		 * will get this right anyway
		 */
	}

	mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07;
1648

1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665
	if (ata_id_is_cfa(id)) {
		/*
		 *	Process compact flash extended modes
		 */
		int pio = id[163] & 0x7;
		int dma = (id[163] >> 3) & 7;

		if (pio)
			pio_mask |= (1 << 5);
		if (pio > 1)
			pio_mask |= (1 << 6);
		if (dma)
			mwdma_mask |= (1 << 3);
		if (dma > 1)
			mwdma_mask |= (1 << 4);
	}

1666 1667 1668
	udma_mask = 0;
	if (id[ATA_ID_FIELD_VALID] & (1 << 2))
		udma_mask = id[ATA_ID_UDMA_MODES] & 0xff;
1669 1670 1671 1672

	return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
}

T
Tejun Heo 已提交
1673
/**
1674
 *	ata_pio_queue_task - Queue port_task
T
Tejun Heo 已提交
1675
 *	@ap: The ata_port to queue port_task for
1676
 *	@data: data for @fn to use
1677
 *	@delay: delay time in msecs for workqueue function
T
Tejun Heo 已提交
1678 1679 1680 1681 1682 1683 1684
 *
 *	Schedule @fn(@data) for execution after @delay jiffies using
 *	port_task.  There is one port_task per port and it's the
 *	user(low level driver)'s responsibility to make sure that only
 *	one task is active at any given time.
 *
 *	libata core layer takes care of synchronization between
1685
 *	port_task and EH.  ata_pio_queue_task() may be ignored for EH
T
Tejun Heo 已提交
1686 1687 1688 1689 1690
 *	synchronization.
 *
 *	LOCKING:
 *	Inherited from caller.
 */
T
Tejun Heo 已提交
1691
void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
T
Tejun Heo 已提交
1692
{
1693
	ap->port_task_data = data;
T
Tejun Heo 已提交
1694

1695
	/* may fail if ata_port_flush_task() in progress */
1696
	queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay));
T
Tejun Heo 已提交
1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712
}

/**
 *	ata_port_flush_task - Flush port_task
 *	@ap: The ata_port to flush port_task for
 *
 *	After this function completes, port_task is guranteed not to
 *	be running or scheduled.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 */
void ata_port_flush_task(struct ata_port *ap)
{
	DPRINTK("ENTER\n");

1713
	cancel_rearming_delayed_work(&ap->port_task);
T
Tejun Heo 已提交
1714

1715
	if (ata_msg_ctl(ap))
1716
		ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
T
Tejun Heo 已提交
1717 1718
}

1719
static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
1720
{
1721
	struct completion *waiting = qc->private_data;
1722 1723 1724 1725 1726

	complete(waiting);
}

/**
1727
 *	ata_exec_internal_sg - execute libata internal command
1728 1729
 *	@dev: Device to which the command is sent
 *	@tf: Taskfile registers for the command and the result
1730
 *	@cdb: CDB for packet command
1731
 *	@dma_dir: Data tranfer direction of the command
R
Randy Dunlap 已提交
1732
 *	@sgl: sg list for the data buffer of the command
1733
 *	@n_elem: Number of sg entries
1734
 *	@timeout: Timeout in msecs (0 for default)
1735 1736 1737 1738 1739 1740 1741 1742 1743
 *
 *	Executes libata internal command with timeout.  @tf contains
 *	command on entry and result on return.  Timeout and error
 *	conditions are reported via return value.  No recovery action
 *	is taken after a command times out.  It's caller's duty to
 *	clean up after timeout.
 *
 *	LOCKING:
 *	None.  Should be called with kernel context, might sleep.
1744 1745 1746
 *
 *	RETURNS:
 *	Zero on success, AC_ERR_* mask on failure
1747
 */
1748 1749
unsigned ata_exec_internal_sg(struct ata_device *dev,
			      struct ata_taskfile *tf, const u8 *cdb,
J
Jens Axboe 已提交
1750
			      int dma_dir, struct scatterlist *sgl,
1751
			      unsigned int n_elem, unsigned long timeout)
1752
{
T
Tejun Heo 已提交
1753 1754
	struct ata_link *link = dev->link;
	struct ata_port *ap = link->ap;
1755
	u8 command = tf->command;
1756
	int auto_timeout = 0;
1757
	struct ata_queued_cmd *qc;
1758
	unsigned int tag, preempted_tag;
1759
	u32 preempted_sactive, preempted_qc_active;
1760
	int preempted_nr_active_links;
1761
	DECLARE_COMPLETION_ONSTACK(wait);
1762
	unsigned long flags;
1763
	unsigned int err_mask;
1764
	int rc;
1765

1766
	spin_lock_irqsave(ap->lock, flags);
1767

1768
	/* no internal command while frozen */
1769
	if (ap->pflags & ATA_PFLAG_FROZEN) {
1770
		spin_unlock_irqrestore(ap->lock, flags);
1771 1772 1773
		return AC_ERR_SYSTEM;
	}

1774
	/* initialize internal qc */
1775

1776 1777 1778 1779 1780 1781 1782 1783 1784 1785
	/* XXX: Tag 0 is used for drivers with legacy EH as some
	 * drivers choke if any other tag is given.  This breaks
	 * ata_tag_internal() test for those drivers.  Don't use new
	 * EH stuff without converting to it.
	 */
	if (ap->ops->error_handler)
		tag = ATA_TAG_INTERNAL;
	else
		tag = 0;

1786 1787
	if (test_and_set_bit(tag, &ap->qc_allocated))
		BUG();
1788
	qc = __ata_qc_from_tag(ap, tag);
1789 1790 1791 1792 1793 1794 1795

	qc->tag = tag;
	qc->scsicmd = NULL;
	qc->ap = ap;
	qc->dev = dev;
	ata_qc_reinit(qc);

T
Tejun Heo 已提交
1796 1797
	preempted_tag = link->active_tag;
	preempted_sactive = link->sactive;
1798
	preempted_qc_active = ap->qc_active;
1799
	preempted_nr_active_links = ap->nr_active_links;
T
Tejun Heo 已提交
1800 1801
	link->active_tag = ATA_TAG_POISON;
	link->sactive = 0;
1802
	ap->qc_active = 0;
1803
	ap->nr_active_links = 0;
1804 1805

	/* prepare & issue qc */
1806
	qc->tf = *tf;
1807 1808
	if (cdb)
		memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
1809
	qc->flags |= ATA_QCFLAG_RESULT_TF;
1810 1811
	qc->dma_dir = dma_dir;
	if (dma_dir != DMA_NONE) {
1812
		unsigned int i, buflen = 0;
J
Jens Axboe 已提交
1813
		struct scatterlist *sg;
1814

J
Jens Axboe 已提交
1815 1816
		for_each_sg(sgl, sg, n_elem, i)
			buflen += sg->length;
1817

J
Jens Axboe 已提交
1818
		ata_sg_init(qc, sgl, n_elem);
1819
		qc->nbytes = buflen;
1820 1821
	}

1822
	qc->private_data = &wait;
1823 1824
	qc->complete_fn = ata_qc_complete_internal;

1825
	ata_qc_issue(qc);
1826

1827
	spin_unlock_irqrestore(ap->lock, flags);
1828

1829 1830 1831 1832 1833 1834 1835 1836
	if (!timeout) {
		if (ata_probe_timeout)
			timeout = ata_probe_timeout * 1000;
		else {
			timeout = ata_internal_cmd_timeout(dev, command);
			auto_timeout = 1;
		}
	}
1837 1838

	rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
1839 1840

	ata_port_flush_task(ap);
1841

1842
	if (!rc) {
1843
		spin_lock_irqsave(ap->lock, flags);
1844 1845 1846

		/* We're racing with irq here.  If we lose, the
		 * following test prevents us from completing the qc
1847 1848
		 * twice.  If we win, the port is frozen and will be
		 * cleaned up by ->post_internal_cmd().
1849
		 */
1850
		if (qc->flags & ATA_QCFLAG_ACTIVE) {
1851 1852 1853 1854 1855 1856
			qc->err_mask |= AC_ERR_TIMEOUT;

			if (ap->ops->error_handler)
				ata_port_freeze(ap);
			else
				ata_qc_complete(qc);
1857

1858 1859
			if (ata_msg_warn(ap))
				ata_dev_printk(dev, KERN_WARNING,
T
Tejun Heo 已提交
1860
					"qc timeout (cmd 0x%x)\n", command);
1861 1862
		}

1863
		spin_unlock_irqrestore(ap->lock, flags);
1864 1865
	}

1866 1867 1868 1869
	/* do post_internal_cmd */
	if (ap->ops->post_internal_cmd)
		ap->ops->post_internal_cmd(qc);

1870 1871 1872 1873 1874 1875 1876 1877 1878 1879
	/* perform minimal error analysis */
	if (qc->flags & ATA_QCFLAG_FAILED) {
		if (qc->result_tf.command & (ATA_ERR | ATA_DF))
			qc->err_mask |= AC_ERR_DEV;

		if (!qc->err_mask)
			qc->err_mask |= AC_ERR_OTHER;

		if (qc->err_mask & ~AC_ERR_OTHER)
			qc->err_mask &= ~AC_ERR_OTHER;
1880 1881
	}

1882
	/* finish up */
1883
	spin_lock_irqsave(ap->lock, flags);
1884

1885
	*tf = qc->result_tf;
1886 1887 1888
	err_mask = qc->err_mask;

	ata_qc_free(qc);
T
Tejun Heo 已提交
1889 1890
	link->active_tag = preempted_tag;
	link->sactive = preempted_sactive;
1891
	ap->qc_active = preempted_qc_active;
1892
	ap->nr_active_links = preempted_nr_active_links;
1893

1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904
	/* XXX - Some LLDDs (sata_mv) disable port on command failure.
	 * Until those drivers are fixed, we detect the condition
	 * here, fail the command with AC_ERR_SYSTEM and reenable the
	 * port.
	 *
	 * Note that this doesn't change any behavior as internal
	 * command failure results in disabling the device in the
	 * higher layer for LLDDs without new reset/EH callbacks.
	 *
	 * Kill the following code as soon as those drivers are fixed.
	 */
1905
	if (ap->flags & ATA_FLAG_DISABLED) {
1906 1907 1908 1909
		err_mask |= AC_ERR_SYSTEM;
		ata_port_probe(ap);
	}

1910
	spin_unlock_irqrestore(ap->lock, flags);
1911

1912 1913 1914
	if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
		ata_internal_cmd_timed_out(dev, command);

1915
	return err_mask;
1916 1917
}

1918
/**
1919
 *	ata_exec_internal - execute libata internal command
1920 1921 1922 1923 1924 1925
 *	@dev: Device to which the command is sent
 *	@tf: Taskfile registers for the command and the result
 *	@cdb: CDB for packet command
 *	@dma_dir: Data tranfer direction of the command
 *	@buf: Data buffer of the command
 *	@buflen: Length of data buffer
1926
 *	@timeout: Timeout in msecs (0 for default)
1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938
 *
 *	Wrapper around ata_exec_internal_sg() which takes simple
 *	buffer instead of sg list.
 *
 *	LOCKING:
 *	None.  Should be called with kernel context, might sleep.
 *
 *	RETURNS:
 *	Zero on success, AC_ERR_* mask on failure
 */
unsigned ata_exec_internal(struct ata_device *dev,
			   struct ata_taskfile *tf, const u8 *cdb,
1939 1940
			   int dma_dir, void *buf, unsigned int buflen,
			   unsigned long timeout)
1941
{
1942 1943
	struct scatterlist *psg = NULL, sg;
	unsigned int n_elem = 0;
1944

1945 1946 1947 1948 1949 1950
	if (dma_dir != DMA_NONE) {
		WARN_ON(!buf);
		sg_init_one(&sg, buf, buflen);
		psg = &sg;
		n_elem++;
	}
1951

1952 1953
	return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem,
				    timeout);
1954 1955
}

1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968
/**
 *	ata_do_simple_cmd - execute simple internal command
 *	@dev: Device to which the command is sent
 *	@cmd: Opcode to execute
 *
 *	Execute a 'simple' command, that only consists of the opcode
 *	'cmd' itself, without filling any other registers
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	Zero on success, AC_ERR_* mask on failure
1969
 */
1970
unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
1971 1972 1973 1974 1975 1976 1977 1978 1979
{
	struct ata_taskfile tf;

	ata_tf_init(dev, &tf);

	tf.command = cmd;
	tf.flags |= ATA_TFLAG_DEVICE;
	tf.protocol = ATA_PROT_NODATA;

1980
	return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1981 1982
}

1983 1984 1985 1986 1987 1988 1989
/**
 *	ata_pio_need_iordy	-	check if iordy needed
 *	@adev: ATA device
 *
 *	Check if the current speed of the device requires IORDY. Used
 *	by various controllers for chip configuration.
 */
J
Jeff Garzik 已提交
1990

1991 1992
unsigned int ata_pio_need_iordy(const struct ata_device *adev)
{
A
Alan Cox 已提交
1993 1994
	/* Controller doesn't support  IORDY. Probably a pointless check
	   as the caller should know this */
T
Tejun Heo 已提交
1995
	if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
1996
		return 0;
1997 1998 1999 2000
	/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6.  */
	if (ata_id_is_cfa(adev->id)
	    && (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6))
		return 0;
A
Alan Cox 已提交
2001 2002 2003 2004 2005
	/* PIO3 and higher it is mandatory */
	if (adev->pio_mode > XFER_PIO_2)
		return 1;
	/* We turn it on when possible */
	if (ata_id_has_iordy(adev->id))
2006
		return 1;
A
Alan Cox 已提交
2007 2008
	return 0;
}
2009

A
Alan Cox 已提交
2010 2011 2012 2013 2014 2015 2016
/**
 *	ata_pio_mask_no_iordy	-	Return the non IORDY mask
 *	@adev: ATA device
 *
 *	Compute the highest mode possible if we are not using iordy. Return
 *	-1 if no iordy mode is available.
 */
J
Jeff Garzik 已提交
2017

A
Alan Cox 已提交
2018 2019
static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
{
2020 2021
	/* If we have no drive specific rule, then PIO 2 is non IORDY */
	if (adev->id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE */
A
Alan Cox 已提交
2022
		u16 pio = adev->id[ATA_ID_EIDE_PIO];
2023 2024 2025 2026
		/* Is the speed faster than the drive allows non IORDY ? */
		if (pio) {
			/* This is cycle times not frequency - watch the logic! */
			if (pio > 240)	/* PIO2 is 240nS per cycle */
A
Alan Cox 已提交
2027 2028
				return 3 << ATA_SHIFT_PIO;
			return 7 << ATA_SHIFT_PIO;
2029 2030
		}
	}
A
Alan Cox 已提交
2031
	return 3 << ATA_SHIFT_PIO;
2032 2033
}

2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050
/**
 *	ata_do_dev_read_id		-	default ID read method
 *	@dev: device
 *	@tf: proposed taskfile
 *	@id: data buffer
 *
 *	Issue the identify taskfile and hand back the buffer containing
 *	identify data. For some RAID controllers and for pre ATA devices
 *	this function is wrapped or replaced by the driver
 */
unsigned int ata_do_dev_read_id(struct ata_device *dev,
					struct ata_taskfile *tf, u16 *id)
{
	return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
}

L
Linus Torvalds 已提交
2051
/**
2052 2053 2054
 *	ata_dev_read_id - Read ID data from the specified device
 *	@dev: target device
 *	@p_class: pointer to class of the target device (may be changed)
2055
 *	@flags: ATA_READID_* flags
2056
 *	@id: buffer to read IDENTIFY data into
L
Linus Torvalds 已提交
2057
 *
2058 2059
 *	Read ID data from the specified device.  ATA_CMD_ID_ATA is
 *	performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
T
Tejun Heo 已提交
2060 2061
 *	devices.  This function also issues ATA_CMD_INIT_DEV_PARAMS
 *	for pre-ATA4 drives.
L
Linus Torvalds 已提交
2062
 *
2063
 *	FIXME: ATA_CMD_ID_ATA is optional for early drives and right
2064
 *	now we abort if we hit that case.
2065
 *
L
Linus Torvalds 已提交
2066
 *	LOCKING:
2067 2068 2069 2070
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 on success, -errno otherwise.
L
Linus Torvalds 已提交
2071
 */
2072
int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
2073
		    unsigned int flags, u16 *id)
L
Linus Torvalds 已提交
2074
{
T
Tejun Heo 已提交
2075
	struct ata_port *ap = dev->link->ap;
2076
	unsigned int class = *p_class;
2077
	struct ata_taskfile tf;
2078 2079
	unsigned int err_mask = 0;
	const char *reason;
2080
	int may_fallback = 1, tried_spinup = 0;
2081
	int rc;
L
Linus Torvalds 已提交
2082

2083
	if (ata_msg_ctl(ap))
2084
		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
L
Linus Torvalds 已提交
2085

2086
retry:
T
Tejun Heo 已提交
2087
	ata_tf_init(dev, &tf);
2088

2089 2090
	switch (class) {
	case ATA_DEV_ATA:
2091
		tf.command = ATA_CMD_ID_ATA;
2092 2093
		break;
	case ATA_DEV_ATAPI:
2094
		tf.command = ATA_CMD_ID_ATAPI;
2095 2096 2097 2098 2099
		break;
	default:
		rc = -ENODEV;
		reason = "unsupported class";
		goto err_out;
L
Linus Torvalds 已提交
2100 2101
	}

2102
	tf.protocol = ATA_PROT_PIO;
T
Tejun Heo 已提交
2103 2104 2105 2106 2107 2108 2109 2110 2111 2112

	/* Some devices choke if TF registers contain garbage.  Make
	 * sure those are properly initialized.
	 */
	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;

	/* Device presence detection is unreliable on some
	 * controllers.  Always poll IDENTIFY if available.
	 */
	tf.flags |= ATA_TFLAG_POLLING;
L
Linus Torvalds 已提交
2113

2114 2115 2116 2117 2118
	if (ap->ops->read_id)
		err_mask = ap->ops->read_id(dev, &tf, id);
	else
		err_mask = ata_do_dev_read_id(dev, &tf, id);

2119
	if (err_mask) {
2120
		if (err_mask & AC_ERR_NODEV_HINT) {
2121 2122
			ata_dev_printk(dev, KERN_DEBUG,
				       "NODEV after polling detection\n");
2123 2124 2125
			return -ENOENT;
		}

2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148
		if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
			/* Device or controller might have reported
			 * the wrong device class.  Give a shot at the
			 * other IDENTIFY if the current one is
			 * aborted by the device.
			 */
			if (may_fallback) {
				may_fallback = 0;

				if (class == ATA_DEV_ATA)
					class = ATA_DEV_ATAPI;
				else
					class = ATA_DEV_ATA;
				goto retry;
			}

			/* Control reaches here iff the device aborted
			 * both flavors of IDENTIFYs which happens
			 * sometimes with phantom devices.
			 */
			ata_dev_printk(dev, KERN_DEBUG,
				       "both IDENTIFYs aborted, assuming NODEV\n");
			return -ENOENT;
2149 2150
		}

2151 2152
		rc = -EIO;
		reason = "I/O error";
L
Linus Torvalds 已提交
2153 2154 2155
		goto err_out;
	}

2156 2157 2158 2159 2160
	/* Falling back doesn't make sense if ID data was read
	 * successfully at least once.
	 */
	may_fallback = 0;

2161
	swap_buf_le16(id, ATA_ID_WORDS);
L
Linus Torvalds 已提交
2162

2163
	/* sanity check */
2164
	rc = -EINVAL;
A
Alan Cox 已提交
2165
	reason = "device reports invalid type";
2166 2167 2168 2169 2170 2171 2172

	if (class == ATA_DEV_ATA) {
		if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
			goto err_out;
	} else {
		if (ata_id_is_ata(id))
			goto err_out;
2173 2174
	}

2175 2176 2177 2178 2179 2180 2181
	if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) {
		tried_spinup = 1;
		/*
		 * Drive powered-up in standby mode, and requires a specific
		 * SET_FEATURES spin-up subcommand before it will accept
		 * anything other than the original IDENTIFY command.
		 */
2182
		err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0);
2183
		if (err_mask && id[2] != 0x738c) {
2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195
			rc = -EIO;
			reason = "SPINUP failed";
			goto err_out;
		}
		/*
		 * If the drive initially returned incomplete IDENTIFY info,
		 * we now must reissue the IDENTIFY command.
		 */
		if (id[2] == 0x37c8)
			goto retry;
	}

2196
	if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
2197 2198 2199
		/*
		 * The exact sequence expected by certain pre-ATA4 drives is:
		 * SRST RESET
2200 2201
		 * IDENTIFY (optional in early ATA)
		 * INITIALIZE DEVICE PARAMETERS (later IDE and ATA)
2202 2203
		 * anything else..
		 * Some drives were very specific about that exact sequence.
2204 2205 2206
		 *
		 * Note that ATA4 says lba is mandatory so the second check
		 * shoud never trigger.
2207 2208
		 */
		if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
T
Tejun Heo 已提交
2209
			err_mask = ata_dev_init_params(dev, id[3], id[6]);
2210 2211 2212 2213 2214 2215 2216 2217 2218
			if (err_mask) {
				rc = -EIO;
				reason = "INIT_DEV_PARAMS failed";
				goto err_out;
			}

			/* current CHS translation info (id[53-58]) might be
			 * changed. reread the identify device info.
			 */
2219
			flags &= ~ATA_READID_POSTRESET;
2220 2221 2222 2223 2224
			goto retry;
		}
	}

	*p_class = class;
2225

2226 2227 2228
	return 0;

 err_out:
T
Tejun Heo 已提交
2229
	if (ata_msg_warn(ap))
2230
		ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY "
T
Tejun Heo 已提交
2231
			       "(%s, err_mask=0x%x)\n", reason, err_mask);
2232 2233 2234
	return rc;
}

T
Tejun Heo 已提交
2235
static inline u8 ata_dev_knobble(struct ata_device *dev)
2236
{
T
Tejun Heo 已提交
2237
	struct ata_port *ap = dev->link->ap;
2238 2239 2240 2241

	if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
		return 0;

T
Tejun Heo 已提交
2242
	return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
2243 2244
}

2245 2246 2247
static void ata_dev_config_ncq(struct ata_device *dev,
			       char *desc, size_t desc_sz)
{
T
Tejun Heo 已提交
2248
	struct ata_port *ap = dev->link->ap;
2249 2250 2251 2252 2253 2254
	int hdepth = 0, ddepth = ata_id_queue_depth(dev->id);

	if (!ata_id_has_ncq(dev->id)) {
		desc[0] = '\0';
		return;
	}
T
Tejun Heo 已提交
2255
	if (dev->horkage & ATA_HORKAGE_NONCQ) {
2256 2257 2258
		snprintf(desc, desc_sz, "NCQ (not used)");
		return;
	}
2259
	if (ap->flags & ATA_FLAG_NCQ) {
J
Jeff Garzik 已提交
2260
		hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
2261 2262 2263 2264 2265 2266 2267 2268 2269
		dev->flags |= ATA_DFLAG_NCQ;
	}

	if (hdepth >= ddepth)
		snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth);
	else
		snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
}

2270
/**
2271 2272 2273 2274 2275
 *	ata_dev_configure - Configure the specified ATA/ATAPI device
 *	@dev: Target device to configure
 *
 *	Configure @dev according to @dev->id.  Generic and low-level
 *	driver specific fixups are also applied.
2276 2277
 *
 *	LOCKING:
2278 2279 2280 2281
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 on success, -errno otherwise
2282
 */
2283
int ata_dev_configure(struct ata_device *dev)
2284
{
T
Tejun Heo 已提交
2285 2286
	struct ata_port *ap = dev->link->ap;
	struct ata_eh_context *ehc = &dev->link->eh_context;
T
Tejun Heo 已提交
2287
	int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
2288
	const u16 *id = dev->id;
2289
	unsigned long xfer_mask;
2290
	char revbuf[7];		/* XYZ-99\0 */
2291 2292
	char fwrevbuf[ATA_ID_FW_REV_LEN+1];
	char modelbuf[ATA_ID_PROD_LEN+1];
2293
	int rc;
2294

2295
	if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
T
Tejun Heo 已提交
2296
		ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
2297
			       __func__);
2298
		return 0;
2299 2300
	}

2301
	if (ata_msg_probe(ap))
2302
		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
L
Linus Torvalds 已提交
2303

T
Tejun Heo 已提交
2304 2305
	/* set horkage */
	dev->horkage |= ata_dev_blacklisted(dev);
2306
	ata_force_horkage(dev);
T
Tejun Heo 已提交
2307

2308 2309 2310 2311 2312 2313 2314
	if (dev->horkage & ATA_HORKAGE_DISABLE) {
		ata_dev_printk(dev, KERN_INFO,
			       "unsupported device, disabling\n");
		ata_dev_disable(dev);
		return 0;
	}

2315 2316 2317 2318 2319 2320 2321 2322 2323 2324
	if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
	    dev->class == ATA_DEV_ATAPI) {
		ata_dev_printk(dev, KERN_WARNING,
			"WARNING: ATAPI is %s, device ignored.\n",
			atapi_enabled ? "not supported with this driver"
				      : "disabled");
		ata_dev_disable(dev);
		return 0;
	}

T
Tejun Heo 已提交
2325 2326 2327 2328
	/* let ACPI work its magic */
	rc = ata_acpi_on_devcfg(dev);
	if (rc)
		return rc;
2329

T
Tejun Heo 已提交
2330 2331 2332 2333 2334
	/* massage HPA, do it early as it might change IDENTIFY data */
	rc = ata_hpa_resize(dev);
	if (rc)
		return rc;

2335
	/* print device capabilities */
2336
	if (ata_msg_probe(ap))
T
Tejun Heo 已提交
2337 2338 2339
		ata_dev_printk(dev, KERN_DEBUG,
			       "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
			       "85:%04x 86:%04x 87:%04x 88:%04x\n",
2340
			       __func__,
2341 2342
			       id[49], id[82], id[83], id[84],
			       id[85], id[86], id[87], id[88]);
2343

2344
	/* initialize to-be-configured parameters */
2345
	dev->flags &= ~ATA_DFLAG_CFG_MASK;
2346 2347 2348 2349 2350 2351 2352
	dev->max_sectors = 0;
	dev->cdb_len = 0;
	dev->n_sectors = 0;
	dev->cylinders = 0;
	dev->heads = 0;
	dev->sectors = 0;

L
Linus Torvalds 已提交
2353 2354 2355 2356
	/*
	 * common ATA, ATAPI feature tests
	 */

2357
	/* find max transfer mode; for printk only */
2358
	xfer_mask = ata_id_xfermask(id);
L
Linus Torvalds 已提交
2359

2360 2361
	if (ata_msg_probe(ap))
		ata_dump_id(id);
L
Linus Torvalds 已提交
2362

2363 2364 2365 2366 2367 2368 2369
	/* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
	ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
			sizeof(fwrevbuf));

	ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD,
			sizeof(modelbuf));

L
Linus Torvalds 已提交
2370 2371
	/* ATA-specific feature tests */
	if (dev->class == ATA_DEV_ATA) {
2372 2373
		if (ata_id_is_cfa(id)) {
			if (id[162] & 1) /* CPRM may make this media unusable */
T
Tejun Heo 已提交
2374 2375 2376
				ata_dev_printk(dev, KERN_WARNING,
					       "supports DRM functions and may "
					       "not be fully accessable.\n");
2377
			snprintf(revbuf, 7, "CFA");
2378
		} else {
2379
			snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
2380 2381 2382 2383 2384 2385
			/* Warn the user if the device has TPM extensions */
			if (ata_id_has_tpm(id))
				ata_dev_printk(dev, KERN_WARNING,
					       "supports DRM functions and may "
					       "not be fully accessable.\n");
		}
2386

2387
		dev->n_sectors = ata_id_n_sectors(id);
2388

2389 2390 2391
		if (dev->id[59] & 0x100)
			dev->multi_count = dev->id[59] & 0xff;

2392
		if (ata_id_has_lba(id)) {
2393
			const char *lba_desc;
2394
			char ncq_desc[20];
2395

2396 2397
			lba_desc = "LBA";
			dev->flags |= ATA_DFLAG_LBA;
2398
			if (ata_id_has_lba48(id)) {
2399
				dev->flags |= ATA_DFLAG_LBA48;
2400
				lba_desc = "LBA48";
2401 2402 2403 2404

				if (dev->n_sectors >= (1UL << 28) &&
				    ata_id_has_flush_ext(id))
					dev->flags |= ATA_DFLAG_FLUSH_EXT;
2405
			}
2406

2407 2408 2409
			/* config NCQ */
			ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));

2410
			/* print device info to dmesg */
2411 2412 2413 2414 2415 2416 2417
			if (ata_msg_drv(ap) && print_info) {
				ata_dev_printk(dev, KERN_INFO,
					"%s: %s, %s, max %s\n",
					revbuf, modelbuf, fwrevbuf,
					ata_mode_string(xfer_mask));
				ata_dev_printk(dev, KERN_INFO,
					"%Lu sectors, multi %u: %s %s\n",
2418
					(unsigned long long)dev->n_sectors,
2419 2420
					dev->multi_count, lba_desc, ncq_desc);
			}
2421
		} else {
2422 2423 2424
			/* CHS */

			/* Default translation */
2425 2426 2427
			dev->cylinders	= id[1];
			dev->heads	= id[3];
			dev->sectors	= id[6];
2428

2429
			if (ata_id_current_chs_valid(id)) {
2430
				/* Current CHS translation is valid. */
2431 2432 2433
				dev->cylinders = id[54];
				dev->heads     = id[55];
				dev->sectors   = id[56];
2434 2435 2436
			}

			/* print device info to dmesg */
2437
			if (ata_msg_drv(ap) && print_info) {
T
Tejun Heo 已提交
2438
				ata_dev_printk(dev, KERN_INFO,
2439 2440 2441
					"%s: %s, %s, max %s\n",
					revbuf,	modelbuf, fwrevbuf,
					ata_mode_string(xfer_mask));
J
Jeff Garzik 已提交
2442
				ata_dev_printk(dev, KERN_INFO,
2443 2444 2445 2446 2447
					"%Lu sectors, multi %u, CHS %u/%u/%u\n",
					(unsigned long long)dev->n_sectors,
					dev->multi_count, dev->cylinders,
					dev->heads, dev->sectors);
			}
2448 2449
		}

2450
		dev->cdb_len = 16;
L
Linus Torvalds 已提交
2451 2452 2453
	}

	/* ATAPI-specific feature tests */
J
Jeff Garzik 已提交
2454
	else if (dev->class == ATA_DEV_ATAPI) {
T
Tejun Heo 已提交
2455 2456
		const char *cdb_intr_string = "";
		const char *atapi_an_string = "";
2457
		const char *dma_dir_string = "";
2458
		u32 sntf;
2459

2460
		rc = atapi_cdb_len(id);
L
Linus Torvalds 已提交
2461
		if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
2462
			if (ata_msg_warn(ap))
T
Tejun Heo 已提交
2463 2464
				ata_dev_printk(dev, KERN_WARNING,
					       "unsupported CDB len\n");
2465
			rc = -EINVAL;
L
Linus Torvalds 已提交
2466 2467
			goto err_out_nosup;
		}
2468
		dev->cdb_len = (unsigned int) rc;
L
Linus Torvalds 已提交
2469

2470 2471 2472 2473
		/* Enable ATAPI AN if both the host and device have
		 * the support.  If PMP is attached, SNTF is required
		 * to enable ATAPI AN to discern between PHY status
		 * changed notifications and ATAPI ANs.
2474
		 */
2475
		if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
T
Tejun Heo 已提交
2476
		    (!sata_pmp_attached(ap) ||
2477
		     sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
T
Tejun Heo 已提交
2478 2479
			unsigned int err_mask;

2480
			/* issue SET feature command to turn this on */
2481 2482
			err_mask = ata_dev_set_feature(dev,
					SETFEATURES_SATA_ENABLE, SATA_AN);
T
Tejun Heo 已提交
2483
			if (err_mask)
2484
				ata_dev_printk(dev, KERN_ERR,
T
Tejun Heo 已提交
2485 2486 2487
					"failed to enable ATAPI AN "
					"(err_mask=0x%x)\n", err_mask);
			else {
2488
				dev->flags |= ATA_DFLAG_AN;
T
Tejun Heo 已提交
2489 2490
				atapi_an_string = ", ATAPI AN";
			}
2491 2492
		}

2493
		if (ata_id_cdb_intr(dev->id)) {
2494
			dev->flags |= ATA_DFLAG_CDB_INTR;
2495 2496
			cdb_intr_string = ", CDB intr";
		}
2497

2498 2499 2500 2501 2502
		if (atapi_dmadir || atapi_id_dmadir(dev->id)) {
			dev->flags |= ATA_DFLAG_DMADIR;
			dma_dir_string = ", DMADIR";
		}

L
Linus Torvalds 已提交
2503
		/* print device info to dmesg */
2504
		if (ata_msg_drv(ap) && print_info)
2505
			ata_dev_printk(dev, KERN_INFO,
2506
				       "ATAPI: %s, %s, max %s%s%s%s\n",
2507
				       modelbuf, fwrevbuf,
T
Tejun Heo 已提交
2508
				       ata_mode_string(xfer_mask),
2509 2510
				       cdb_intr_string, atapi_an_string,
				       dma_dir_string);
L
Linus Torvalds 已提交
2511 2512
	}

2513 2514 2515 2516 2517
	/* determine max_sectors */
	dev->max_sectors = ATA_MAX_SECTORS;
	if (dev->flags & ATA_DFLAG_LBA48)
		dev->max_sectors = ATA_MAX_SECTORS_LBA48;

2518 2519 2520 2521 2522 2523 2524
	if (!(dev->horkage & ATA_HORKAGE_IPM)) {
		if (ata_id_has_hipm(dev->id))
			dev->flags |= ATA_DFLAG_HIPM;
		if (ata_id_has_dipm(dev->id))
			dev->flags |= ATA_DFLAG_DIPM;
	}

2525 2526
	/* Limit PATA drive on SATA cable bridge transfers to udma5,
	   200 sectors */
T
Tejun Heo 已提交
2527
	if (ata_dev_knobble(dev)) {
2528
		if (ata_msg_drv(ap) && print_info)
2529 2530
			ata_dev_printk(dev, KERN_INFO,
				       "applying bridge limits\n");
2531
		dev->udma_mask &= ATA_UDMA5;
2532 2533 2534
		dev->max_sectors = ATA_MAX_SECTORS;
	}

2535
	if ((dev->class == ATA_DEV_ATAPI) &&
2536
	    (atapi_command_packet_set(id) == TYPE_TAPE)) {
2537
		dev->max_sectors = ATA_MAX_SECTORS_TAPE;
2538 2539
		dev->horkage |= ATA_HORKAGE_STUCK_ERR;
	}
2540

T
Tejun Heo 已提交
2541
	if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
2542 2543
		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
					 dev->max_sectors);
2544

2545 2546 2547 2548 2549 2550 2551
	if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) {
		dev->horkage |= ATA_HORKAGE_IPM;

		/* reset link pm_policy for this port to no pm */
		ap->pm_policy = MAX_PERFORMANCE;
	}

2552
	if (ap->ops->dev_config)
2553
		ap->ops->dev_config(dev);
2554

2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569
	if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
		/* Let the user know. We don't want to disallow opens for
		   rescue purposes, or in case the vendor is just a blithering
		   idiot. Do this after the dev_config call as some controllers
		   with buggy firmware may want to avoid reporting false device
		   bugs */

		if (print_info) {
			ata_dev_printk(dev, KERN_WARNING,
"Drive reports diagnostics failure. This may indicate a drive\n");
			ata_dev_printk(dev, KERN_WARNING,
"fault or invalid emulation. Contact drive vendor for information.\n");
		}
	}

2570 2571 2572 2573 2574 2575 2576
	if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
		ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
			       "firmware update to be fully functional.\n");
		ata_dev_printk(dev, KERN_WARNING, "         contact the vendor "
			       "or visit http://ata.wiki.kernel.org.\n");
	}

2577
	return 0;
L
Linus Torvalds 已提交
2578 2579

err_out_nosup:
2580
	if (ata_msg_probe(ap))
T
Tejun Heo 已提交
2581
		ata_dev_printk(dev, KERN_DEBUG,
2582
			       "%s: EXIT, err\n", __func__);
2583
	return rc;
L
Linus Torvalds 已提交
2584 2585
}

A
Alan Cox 已提交
2586
/**
2587
 *	ata_cable_40wire	-	return 40 wire cable type
A
Alan Cox 已提交
2588 2589
 *	@ap: port
 *
2590
 *	Helper method for drivers which want to hardwire 40 wire cable
A
Alan Cox 已提交
2591 2592 2593 2594 2595 2596 2597 2598 2599
 *	detection.
 */

int ata_cable_40wire(struct ata_port *ap)
{
	return ATA_CBL_PATA40;
}

/**
2600
 *	ata_cable_80wire	-	return 80 wire cable type
A
Alan Cox 已提交
2601 2602
 *	@ap: port
 *
2603
 *	Helper method for drivers which want to hardwire 80 wire cable
A
Alan Cox 已提交
2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623
 *	detection.
 */

int ata_cable_80wire(struct ata_port *ap)
{
	return ATA_CBL_PATA80;
}

/**
 *	ata_cable_unknown	-	return unknown PATA cable.
 *	@ap: port
 *
 *	Helper method for drivers which have no PATA cable detection.
 */

int ata_cable_unknown(struct ata_port *ap)
{
	return ATA_CBL_PATA_UNK;
}

T
Tejun Heo 已提交
2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635
/**
 *	ata_cable_ignore	-	return ignored PATA cable.
 *	@ap: port
 *
 *	Helper method for drivers which don't use cable type to limit
 *	transfer mode.
 */
int ata_cable_ignore(struct ata_port *ap)
{
	return ATA_CBL_PATA_IGN;
}

A
Alan Cox 已提交
2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647
/**
 *	ata_cable_sata	-	return SATA cable type
 *	@ap: port
 *
 *	Helper method for drivers which have SATA cables
 */

int ata_cable_sata(struct ata_port *ap)
{
	return ATA_CBL_SATA;
}

L
Linus Torvalds 已提交
2648 2649 2650 2651
/**
 *	ata_bus_probe - Reset and probe ATA bus
 *	@ap: Bus to probe
 *
J
Jeff Garzik 已提交
2652 2653 2654 2655
 *	Master ATA bus probing function.  Initiates a hardware-dependent
 *	bus reset, then attempts to identify any devices found on
 *	the bus.
 *
L
Linus Torvalds 已提交
2656
 *	LOCKING:
J
Jeff Garzik 已提交
2657
 *	PCI/etc. bus probe sem.
L
Linus Torvalds 已提交
2658 2659
 *
 *	RETURNS:
2660
 *	Zero on success, negative errno otherwise.
L
Linus Torvalds 已提交
2661 2662
 */

2663
int ata_bus_probe(struct ata_port *ap)
L
Linus Torvalds 已提交
2664
{
2665
	unsigned int classes[ATA_MAX_DEVICES];
2666
	int tries[ATA_MAX_DEVICES];
2667
	int rc;
2668
	struct ata_device *dev;
L
Linus Torvalds 已提交
2669

2670
	ata_port_probe(ap);
2671

T
Tejun Heo 已提交
2672
	ata_for_each_dev(dev, &ap->link, ALL)
2673
		tries[dev->devno] = ATA_PROBE_MAX_TRIES;
2674 2675

 retry:
T
Tejun Heo 已提交
2676
	ata_for_each_dev(dev, &ap->link, ALL) {
T
Tejun Heo 已提交
2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694
		/* If we issue an SRST then an ATA drive (not ATAPI)
		 * may change configuration and be in PIO0 timing. If
		 * we do a hard reset (or are coming from power on)
		 * this is true for ATA or ATAPI. Until we've set a
		 * suitable controller mode we should not touch the
		 * bus as we may be talking too fast.
		 */
		dev->pio_mode = XFER_PIO_0;

		/* If the controller has a pio mode setup function
		 * then use it to set the chipset to rights. Don't
		 * touch the DMA setup as that will be dealt with when
		 * configuring devices.
		 */
		if (ap->ops->set_piomode)
			ap->ops->set_piomode(ap, dev);
	}

2695
	/* reset and determine device classes */
2696
	ap->ops->phy_reset(ap);
2697

T
Tejun Heo 已提交
2698
	ata_for_each_dev(dev, &ap->link, ALL) {
2699 2700 2701 2702 2703
		if (!(ap->flags & ATA_FLAG_DISABLED) &&
		    dev->class != ATA_DEV_UNKNOWN)
			classes[dev->devno] = dev->class;
		else
			classes[dev->devno] = ATA_DEV_NONE;
2704

2705
		dev->class = ATA_DEV_UNKNOWN;
2706
	}
L
Linus Torvalds 已提交
2707

2708
	ata_port_probe(ap);
2709

2710 2711 2712 2713
	/* read IDENTIFY page and configure devices. We have to do the identify
	   specific sequence bass-ackwards so that PDIAG- is released by
	   the slave device */

T
Tejun Heo 已提交
2714
	ata_for_each_dev(dev, &ap->link, ALL_REVERSE) {
2715 2716
		if (tries[dev->devno])
			dev->class = classes[dev->devno];
2717

2718
		if (!ata_dev_enabled(dev))
2719 2720
			continue;

2721 2722
		rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET,
				     dev->id);
2723 2724
		if (rc)
			goto fail;
2725 2726
	}

A
Alan Cox 已提交
2727 2728 2729 2730
	/* Now ask for the cable type as PDIAG- should have been released */
	if (ap->ops->cable_detect)
		ap->cbl = ap->ops->cable_detect(ap);

T
Tejun Heo 已提交
2731 2732 2733 2734 2735 2736
	/* We may have SATA bridge glue hiding here irrespective of
	 * the reported cable types and sensed types.  When SATA
	 * drives indicate we have a bridge, we don't know which end
	 * of the link the bridge is which is a problem.
	 */
	ata_for_each_dev(dev, &ap->link, ENABLED)
A
Alan Cox 已提交
2737 2738 2739
		if (ata_id_is_sata(dev->id))
			ap->cbl = ATA_CBL_SATA;

2740 2741 2742
	/* After the identify sequence we can now set up the devices. We do
	   this in the normal order so that the user doesn't get confused */

T
Tejun Heo 已提交
2743
	ata_for_each_dev(dev, &ap->link, ENABLED) {
T
Tejun Heo 已提交
2744
		ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO;
2745
		rc = ata_dev_configure(dev);
T
Tejun Heo 已提交
2746
		ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
2747 2748
		if (rc)
			goto fail;
L
Linus Torvalds 已提交
2749 2750
	}

2751
	/* configure transfer mode */
2752
	rc = ata_set_mode(&ap->link, &dev);
2753
	if (rc)
2754
		goto fail;
L
Linus Torvalds 已提交
2755

T
Tejun Heo 已提交
2756 2757
	ata_for_each_dev(dev, &ap->link, ENABLED)
		return 0;
L
Linus Torvalds 已提交
2758

2759 2760
	/* no device present, disable port */
	ata_port_disable(ap);
2761
	return -ENODEV;
2762 2763

 fail:
2764 2765
	tries[dev->devno]--;

2766 2767
	switch (rc) {
	case -EINVAL:
2768
		/* eeek, something went very wrong, give up */
2769 2770
		tries[dev->devno] = 0;
		break;
2771 2772 2773 2774

	case -ENODEV:
		/* give it just one more chance */
		tries[dev->devno] = min(tries[dev->devno], 1);
2775
	case -EIO:
2776 2777 2778 2779
		if (tries[dev->devno] == 1) {
			/* This is the last chance, better to slow
			 * down than lose it.
			 */
2780
			sata_down_spd_limit(&ap->link);
2781 2782
			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
		}
2783 2784
	}

2785
	if (!tries[dev->devno])
T
Tejun Heo 已提交
2786
		ata_dev_disable(dev);
2787

2788
	goto retry;
L
Linus Torvalds 已提交
2789 2790 2791
}

/**
J
Jeff Garzik 已提交
2792 2793
 *	ata_port_probe - Mark port as enabled
 *	@ap: Port for which we indicate enablement
L
Linus Torvalds 已提交
2794
 *
J
Jeff Garzik 已提交
2795 2796 2797
 *	Modify @ap data structure such that the system
 *	thinks that the entire port is enabled.
 *
J
Jeff Garzik 已提交
2798
 *	LOCKING: host lock, or some other form of
J
Jeff Garzik 已提交
2799
 *	serialization.
L
Linus Torvalds 已提交
2800 2801 2802 2803
 */

void ata_port_probe(struct ata_port *ap)
{
2804
	ap->flags &= ~ATA_FLAG_DISABLED;
L
Linus Torvalds 已提交
2805 2806
}

2807 2808
/**
 *	sata_print_link_status - Print SATA link status
2809
 *	@link: SATA link to printk link status about
2810 2811 2812 2813 2814 2815
 *
 *	This function prints link speed and status of a SATA link.
 *
 *	LOCKING:
 *	None.
 */
2816
static void sata_print_link_status(struct ata_link *link)
2817
{
2818
	u32 sstatus, scontrol, tmp;
2819

2820
	if (sata_scr_read(link, SCR_STATUS, &sstatus))
2821
		return;
2822
	sata_scr_read(link, SCR_CONTROL, &scontrol);
2823

T
Tejun Heo 已提交
2824
	if (ata_phys_link_online(link)) {
2825
		tmp = (sstatus >> 4) & 0xf;
2826
		ata_link_printk(link, KERN_INFO,
2827 2828
				"SATA link up %s (SStatus %X SControl %X)\n",
				sata_spd_string(tmp), sstatus, scontrol);
2829
	} else {
2830
		ata_link_printk(link, KERN_INFO,
2831 2832
				"SATA link down (SStatus %X SControl %X)\n",
				sstatus, scontrol);
2833 2834 2835
	}
}

2836 2837 2838 2839 2840 2841 2842
/**
 *	ata_dev_pair		-	return other device on cable
 *	@adev: device
 *
 *	Obtain the other device on the same cable, or if none is
 *	present NULL is returned
 */
2843

T
Tejun Heo 已提交
2844
struct ata_device *ata_dev_pair(struct ata_device *adev)
2845
{
T
Tejun Heo 已提交
2846 2847
	struct ata_link *link = adev->link;
	struct ata_device *pair = &link->device[1 - adev->devno];
2848
	if (!ata_dev_enabled(pair))
2849 2850 2851 2852
		return NULL;
	return pair;
}

L
Linus Torvalds 已提交
2853
/**
J
Jeff Garzik 已提交
2854 2855
 *	ata_port_disable - Disable port.
 *	@ap: Port to be disabled.
L
Linus Torvalds 已提交
2856
 *
J
Jeff Garzik 已提交
2857 2858 2859 2860 2861
 *	Modify @ap data structure such that the system
 *	thinks that the entire port is disabled, and should
 *	never attempt to probe or communicate with devices
 *	on this port.
 *
J
Jeff Garzik 已提交
2862
 *	LOCKING: host lock, or some other form of
J
Jeff Garzik 已提交
2863
 *	serialization.
L
Linus Torvalds 已提交
2864 2865 2866 2867
 */

void ata_port_disable(struct ata_port *ap)
{
T
Tejun Heo 已提交
2868 2869
	ap->link.device[0].class = ATA_DEV_NONE;
	ap->link.device[1].class = ATA_DEV_NONE;
2870
	ap->flags |= ATA_FLAG_DISABLED;
L
Linus Torvalds 已提交
2871 2872
}

2873
/**
2874
 *	sata_down_spd_limit - adjust SATA spd limit downward
2875
 *	@link: Link to adjust SATA spd limit for
2876
 *
2877
 *	Adjust SATA spd limit of @link downward.  Note that this
2878
 *	function only adjusts the limit.  The change must be applied
2879
 *	using sata_set_spd().
2880 2881 2882 2883 2884 2885 2886
 *
 *	LOCKING:
 *	Inherited from caller.
 *
 *	RETURNS:
 *	0 on success, negative errno on failure
 */
2887
int sata_down_spd_limit(struct ata_link *link)
2888
{
2889 2890
	u32 sstatus, spd, mask;
	int rc, highbit;
2891

2892
	if (!sata_scr_valid(link))
2893 2894 2895
		return -EOPNOTSUPP;

	/* If SCR can be read, use it to determine the current SPD.
2896
	 * If not, use cached value in link->sata_spd.
2897
	 */
2898
	rc = sata_scr_read(link, SCR_STATUS, &sstatus);
2899
	if (rc == 0 && ata_sstatus_online(sstatus))
2900 2901
		spd = (sstatus >> 4) & 0xf;
	else
2902
		spd = link->sata_spd;
2903

2904
	mask = link->sata_spd_limit;
2905 2906
	if (mask <= 1)
		return -EINVAL;
2907 2908

	/* unconditionally mask off the highest bit */
2909 2910 2911
	highbit = fls(mask) - 1;
	mask &= ~(1 << highbit);

2912 2913 2914 2915 2916 2917 2918 2919 2920
	/* Mask off all speeds higher than or equal to the current
	 * one.  Force 1.5Gbps if current SPD is not available.
	 */
	if (spd > 1)
		mask &= (1 << (spd - 1)) - 1;
	else
		mask &= 1;

	/* were we already at the bottom? */
2921 2922 2923
	if (!mask)
		return -EINVAL;

2924
	link->sata_spd_limit = mask;
2925

2926
	ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
2927
			sata_spd_string(fls(mask)));
2928 2929 2930 2931

	return 0;
}

2932
static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
2933
{
2934 2935
	struct ata_link *host_link = &link->ap->link;
	u32 limit, target, spd;
2936

2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947
	limit = link->sata_spd_limit;

	/* Don't configure downstream link faster than upstream link.
	 * It doesn't speed up anything and some PMPs choke on such
	 * configuration.
	 */
	if (!ata_is_host_link(link) && host_link->sata_spd)
		limit &= (1 << host_link->sata_spd) - 1;

	if (limit == UINT_MAX)
		target = 0;
2948
	else
2949
		target = fls(limit);
2950 2951

	spd = (*scontrol >> 4) & 0xf;
2952
	*scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
2953

2954
	return spd != target;
2955 2956 2957
}

/**
2958
 *	sata_set_spd_needed - is SATA spd configuration needed
2959
 *	@link: Link in question
2960 2961
 *
 *	Test whether the spd limit in SControl matches
2962
 *	@link->sata_spd_limit.  This function is used to determine
2963 2964 2965 2966 2967 2968 2969 2970 2971
 *	whether hardreset is necessary to apply SATA spd
 *	configuration.
 *
 *	LOCKING:
 *	Inherited from caller.
 *
 *	RETURNS:
 *	1 if SATA spd configuration is needed, 0 otherwise.
 */
A
Adrian Bunk 已提交
2972
static int sata_set_spd_needed(struct ata_link *link)
2973 2974 2975
{
	u32 scontrol;

2976
	if (sata_scr_read(link, SCR_CONTROL, &scontrol))
2977
		return 1;
2978

2979
	return __sata_set_spd_needed(link, &scontrol);
2980 2981 2982
}

/**
2983
 *	sata_set_spd - set SATA spd according to spd limit
2984
 *	@link: Link to set SATA spd for
2985
 *
2986
 *	Set SATA spd of @link according to sata_spd_limit.
2987 2988 2989 2990 2991 2992
 *
 *	LOCKING:
 *	Inherited from caller.
 *
 *	RETURNS:
 *	0 if spd doesn't need to be changed, 1 if spd has been
2993
 *	changed.  Negative errno if SCR registers are inaccessible.
2994
 */
2995
int sata_set_spd(struct ata_link *link)
2996 2997
{
	u32 scontrol;
2998
	int rc;
2999

3000
	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
3001
		return rc;
3002

3003
	if (!__sata_set_spd_needed(link, &scontrol))
3004 3005
		return 0;

3006
	if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
3007 3008
		return rc;

3009 3010 3011
	return 1;
}

A
Alan Cox 已提交
3012 3013 3014 3015 3016
/*
 * This mode timing computation functionality is ported over from
 * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
 */
/*
3017
 * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
A
Alan Cox 已提交
3018
 * These were taken from ATA/ATAPI-6 standard, rev 0a, except
3019 3020 3021
 * for UDMA6, which is currently supported only by Maxtor drives.
 *
 * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0.
A
Alan Cox 已提交
3022 3023 3024
 */

static const struct ata_timing ata_timing[] = {
3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051
/*	{ XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0,  960,   0 }, */
	{ XFER_PIO_0,     70, 290, 240, 600, 165, 150, 0,  600,   0 },
	{ XFER_PIO_1,     50, 290,  93, 383, 125, 100, 0,  383,   0 },
	{ XFER_PIO_2,     30, 290,  40, 330, 100,  90, 0,  240,   0 },
	{ XFER_PIO_3,     30,  80,  70, 180,  80,  70, 0,  180,   0 },
	{ XFER_PIO_4,     25,  70,  25, 120,  70,  25, 0,  120,   0 },
	{ XFER_PIO_5,     15,  65,  25, 100,  65,  25, 0,  100,   0 },
	{ XFER_PIO_6,     10,  55,  20,  80,  55,  20, 0,   80,   0 },

	{ XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 50, 960,   0 },
	{ XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 30, 480,   0 },
	{ XFER_SW_DMA_2,  60,   0,   0,   0, 120, 120, 20, 240,   0 },

	{ XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 20, 480,   0 },
	{ XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 5,  150,   0 },
	{ XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 5,  120,   0 },
	{ XFER_MW_DMA_3,  25,   0,   0,   0,  65,  25, 5,  100,   0 },
	{ XFER_MW_DMA_4,  25,   0,   0,   0,  55,  20, 5,   80,   0 },

/*	{ XFER_UDMA_SLOW,  0,   0,   0,   0,   0,   0, 0,    0, 150 }, */
	{ XFER_UDMA_0,     0,   0,   0,   0,   0,   0, 0,    0, 120 },
	{ XFER_UDMA_1,     0,   0,   0,   0,   0,   0, 0,    0,  80 },
	{ XFER_UDMA_2,     0,   0,   0,   0,   0,   0, 0,    0,  60 },
	{ XFER_UDMA_3,     0,   0,   0,   0,   0,   0, 0,    0,  45 },
	{ XFER_UDMA_4,     0,   0,   0,   0,   0,   0, 0,    0,  30 },
	{ XFER_UDMA_5,     0,   0,   0,   0,   0,   0, 0,    0,  20 },
	{ XFER_UDMA_6,     0,   0,   0,   0,   0,   0, 0,    0,  15 },
A
Alan Cox 已提交
3052 3053 3054 3055

	{ 0xFF }
};

3056 3057
#define ENOUGH(v, unit)		(((v)-1)/(unit)+1)
#define EZ(v, unit)		((v)?ENOUGH(v, unit):0)
A
Alan Cox 已提交
3058 3059 3060

static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
{
3061 3062 3063 3064 3065 3066 3067 3068 3069
	q->setup	= EZ(t->setup      * 1000,  T);
	q->act8b	= EZ(t->act8b      * 1000,  T);
	q->rec8b	= EZ(t->rec8b      * 1000,  T);
	q->cyc8b	= EZ(t->cyc8b      * 1000,  T);
	q->active	= EZ(t->active     * 1000,  T);
	q->recover	= EZ(t->recover    * 1000,  T);
	q->dmack_hold	= EZ(t->dmack_hold * 1000,  T);
	q->cycle	= EZ(t->cycle      * 1000,  T);
	q->udma		= EZ(t->udma       * 1000, UT);
A
Alan Cox 已提交
3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080
}

void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
		      struct ata_timing *m, unsigned int what)
{
	if (what & ATA_TIMING_SETUP  ) m->setup   = max(a->setup,   b->setup);
	if (what & ATA_TIMING_ACT8B  ) m->act8b   = max(a->act8b,   b->act8b);
	if (what & ATA_TIMING_REC8B  ) m->rec8b   = max(a->rec8b,   b->rec8b);
	if (what & ATA_TIMING_CYC8B  ) m->cyc8b   = max(a->cyc8b,   b->cyc8b);
	if (what & ATA_TIMING_ACTIVE ) m->active  = max(a->active,  b->active);
	if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
3081
	if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
A
Alan Cox 已提交
3082 3083 3084 3085
	if (what & ATA_TIMING_CYCLE  ) m->cycle   = max(a->cycle,   b->cycle);
	if (what & ATA_TIMING_UDMA   ) m->udma    = max(a->udma,    b->udma);
}

3086
const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
A
Alan Cox 已提交
3087
{
3088 3089 3090 3091
	const struct ata_timing *t = ata_timing;

	while (xfer_mode > t->mode)
		t++;
A
Alan Cox 已提交
3092

3093 3094 3095
	if (xfer_mode == t->mode)
		return t;
	return NULL;
A
Alan Cox 已提交
3096 3097 3098 3099 3100 3101 3102 3103 3104
}

int ata_timing_compute(struct ata_device *adev, unsigned short speed,
		       struct ata_timing *t, int T, int UT)
{
	const struct ata_timing *s;
	struct ata_timing p;

	/*
3105
	 * Find the mode.
3106
	 */
A
Alan Cox 已提交
3107 3108 3109 3110

	if (!(s = ata_timing_find_mode(speed)))
		return -EINVAL;

3111 3112
	memcpy(t, s, sizeof(*s));

A
Alan Cox 已提交
3113 3114 3115 3116 3117 3118 3119
	/*
	 * If the drive is an EIDE drive, it can tell us it needs extended
	 * PIO/MW_DMA cycle timing.
	 */

	if (adev->id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
		memset(&p, 0, sizeof(p));
3120
		if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
A
Alan Cox 已提交
3121 3122
			if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
					    else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
3123
		} else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
A
Alan Cox 已提交
3124 3125 3126 3127 3128 3129 3130 3131 3132
			p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
		}
		ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
	}

	/*
	 * Convert the timing to bus clock counts.
	 */

3133
	ata_timing_quantize(t, t, T, UT);
A
Alan Cox 已提交
3134 3135

	/*
3136 3137 3138
	 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
	 * S.M.A.R.T * and some other commands. We have to ensure that the
	 * DMA cycle timing is slower/equal than the fastest PIO timing.
A
Alan Cox 已提交
3139 3140
	 */

3141
	if (speed > XFER_PIO_6) {
A
Alan Cox 已提交
3142 3143 3144 3145 3146
		ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
		ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
	}

	/*
3147
	 * Lengthen active & recovery time so that cycle time is correct.
A
Alan Cox 已提交
3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158
	 */

	if (t->act8b + t->rec8b < t->cyc8b) {
		t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
		t->rec8b = t->cyc8b - t->act8b;
	}

	if (t->active + t->recover < t->cycle) {
		t->active += (t->cycle - (t->active + t->recover)) / 2;
		t->recover = t->cycle - t->active;
	}
J
Jeff Garzik 已提交
3159

3160 3161 3162 3163 3164
	/* In a few cases quantisation may produce enough errors to
	   leave t->cycle too low for the sum of active and recovery
	   if so we must correct this */
	if (t->active + t->recover > t->cycle)
		t->cycle = t->active + t->recover;
A
Alan Cox 已提交
3165 3166 3167 3168

	return 0;
}

3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219
/**
 *	ata_timing_cycle2mode - find xfer mode for the specified cycle duration
 *	@xfer_shift: ATA_SHIFT_* value for transfer type to examine.
 *	@cycle: cycle duration in ns
 *
 *	Return matching xfer mode for @cycle.  The returned mode is of
 *	the transfer type specified by @xfer_shift.  If @cycle is too
 *	slow for @xfer_shift, 0xff is returned.  If @cycle is faster
 *	than the fastest known mode, the fasted mode is returned.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	Matching xfer_mode, 0xff if no match found.
 */
u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle)
{
	u8 base_mode = 0xff, last_mode = 0xff;
	const struct ata_xfer_ent *ent;
	const struct ata_timing *t;

	for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
		if (ent->shift == xfer_shift)
			base_mode = ent->base;

	for (t = ata_timing_find_mode(base_mode);
	     t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) {
		unsigned short this_cycle;

		switch (xfer_shift) {
		case ATA_SHIFT_PIO:
		case ATA_SHIFT_MWDMA:
			this_cycle = t->cycle;
			break;
		case ATA_SHIFT_UDMA:
			this_cycle = t->udma;
			break;
		default:
			return 0xff;
		}

		if (cycle > this_cycle)
			break;

		last_mode = t->mode;
	}

	return last_mode;
}

3220 3221 3222
/**
 *	ata_down_xfermask_limit - adjust dev xfer masks downward
 *	@dev: Device to adjust xfer masks
3223
 *	@sel: ATA_DNXFER_* selector
3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234
 *
 *	Adjust xfer masks of @dev downward.  Note that this function
 *	does not apply the change.  Invoking ata_set_mode() afterwards
 *	will apply the limit.
 *
 *	LOCKING:
 *	Inherited from caller.
 *
 *	RETURNS:
 *	0 on success, negative errno on failure
 */
3235
int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
3236
{
3237
	char buf[32];
3238 3239
	unsigned long orig_mask, xfer_mask;
	unsigned long pio_mask, mwdma_mask, udma_mask;
3240
	int quiet, highbit;
3241

3242 3243
	quiet = !!(sel & ATA_DNXFER_QUIET);
	sel &= ~ATA_DNXFER_QUIET;
3244

3245 3246 3247 3248
	xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
						  dev->mwdma_mask,
						  dev->udma_mask);
	ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
3249

3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301
	switch (sel) {
	case ATA_DNXFER_PIO:
		highbit = fls(pio_mask) - 1;
		pio_mask &= ~(1 << highbit);
		break;

	case ATA_DNXFER_DMA:
		if (udma_mask) {
			highbit = fls(udma_mask) - 1;
			udma_mask &= ~(1 << highbit);
			if (!udma_mask)
				return -ENOENT;
		} else if (mwdma_mask) {
			highbit = fls(mwdma_mask) - 1;
			mwdma_mask &= ~(1 << highbit);
			if (!mwdma_mask)
				return -ENOENT;
		}
		break;

	case ATA_DNXFER_40C:
		udma_mask &= ATA_UDMA_MASK_40C;
		break;

	case ATA_DNXFER_FORCE_PIO0:
		pio_mask &= 1;
	case ATA_DNXFER_FORCE_PIO:
		mwdma_mask = 0;
		udma_mask = 0;
		break;

	default:
		BUG();
	}

	xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);

	if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
		return -ENOENT;

	if (!quiet) {
		if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
			snprintf(buf, sizeof(buf), "%s:%s",
				 ata_mode_string(xfer_mask),
				 ata_mode_string(xfer_mask & ATA_MASK_PIO));
		else
			snprintf(buf, sizeof(buf), "%s",
				 ata_mode_string(xfer_mask));

		ata_dev_printk(dev, KERN_WARNING,
			       "limiting speed to %s\n", buf);
	}
3302 3303 3304 3305 3306 3307 3308

	ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
			    &dev->udma_mask);

	return 0;
}

T
Tejun Heo 已提交
3309
static int ata_dev_set_mode(struct ata_device *dev)
L
Linus Torvalds 已提交
3310
{
T
Tejun Heo 已提交
3311
	struct ata_eh_context *ehc = &dev->link->eh_context;
3312 3313
	const char *dev_err_whine = "";
	int ign_dev_err = 0;
3314 3315
	unsigned int err_mask;
	int rc;
L
Linus Torvalds 已提交
3316

3317
	dev->flags &= ~ATA_DFLAG_PIO;
L
Linus Torvalds 已提交
3318 3319 3320
	if (dev->xfer_shift == ATA_SHIFT_PIO)
		dev->flags |= ATA_DFLAG_PIO;

T
Tejun Heo 已提交
3321
	err_mask = ata_dev_set_xfermode(dev);
3322

3323 3324 3325 3326 3327 3328 3329 3330 3331 3332
	if (err_mask & ~AC_ERR_DEV)
		goto fail;

	/* revalidate */
	ehc->i.flags |= ATA_EHI_POST_SETMODE;
	rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0);
	ehc->i.flags &= ~ATA_EHI_POST_SETMODE;
	if (rc)
		return rc;

3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347
	if (dev->xfer_shift == ATA_SHIFT_PIO) {
		/* Old CFA may refuse this command, which is just fine */
		if (ata_id_is_cfa(dev->id))
			ign_dev_err = 1;
		/* Catch several broken garbage emulations plus some pre
		   ATA devices */
		if (ata_id_major_version(dev->id) == 0 &&
					dev->pio_mode <= XFER_PIO_2)
			ign_dev_err = 1;
		/* Some very old devices and some bad newer ones fail
		   any kind of SET_XFERMODE request but support PIO0-2
		   timings and no IORDY */
		if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2)
			ign_dev_err = 1;
	}
3348 3349
	/* Early MWDMA devices do DMA but don't allow DMA mode setting.
	   Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
3350
	if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
3351 3352
	    dev->dma_mode == XFER_MW_DMA_0 &&
	    (dev->id[63] >> 8) & 1)
3353
		ign_dev_err = 1;
3354

3355 3356 3357
	/* if the device is actually configured correctly, ignore dev err */
	if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id)))
		ign_dev_err = 1;
L
Linus Torvalds 已提交
3358

3359 3360 3361 3362 3363 3364
	if (err_mask & AC_ERR_DEV) {
		if (!ign_dev_err)
			goto fail;
		else
			dev_err_whine = " (device error ignored)";
	}
3365

3366 3367
	DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
		dev->xfer_shift, (int)dev->xfer_mode);
L
Linus Torvalds 已提交
3368

3369 3370 3371 3372
	ata_dev_printk(dev, KERN_INFO, "configured for %s%s\n",
		       ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)),
		       dev_err_whine);

3373
	return 0;
3374 3375 3376 3377 3378

 fail:
	ata_dev_printk(dev, KERN_ERR, "failed to set xfermode "
		       "(err_mask=0x%x)\n", err_mask);
	return -EIO;
L
Linus Torvalds 已提交
3379 3380 3381
}

/**
3382
 *	ata_do_set_mode - Program timings and issue SET FEATURES - XFER
3383
 *	@link: link on which timings will be programmed
J
Joe Perches 已提交
3384
 *	@r_failed_dev: out parameter for failed device
L
Linus Torvalds 已提交
3385
 *
3386 3387 3388
 *	Standard implementation of the function used to tune and set
 *	ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
 *	ata_dev_set_mode() fails, pointer to the failing device is
3389
 *	returned in @r_failed_dev.
J
Jeff Garzik 已提交
3390
 *
L
Linus Torvalds 已提交
3391
 *	LOCKING:
J
Jeff Garzik 已提交
3392
 *	PCI/etc. bus probe sem.
3393 3394 3395
 *
 *	RETURNS:
 *	0 on success, negative errno otherwise
L
Linus Torvalds 已提交
3396
 */
3397

3398
int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
L
Linus Torvalds 已提交
3399
{
3400
	struct ata_port *ap = link->ap;
3401
	struct ata_device *dev;
3402
	int rc = 0, used_dma = 0, found = 0;
3403

3404
	/* step 1: calculate xfer_mask */
T
Tejun Heo 已提交
3405
	ata_for_each_dev(dev, link, ENABLED) {
3406
		unsigned long pio_mask, dma_mask;
3407
		unsigned int mode_mask;
3408

3409 3410 3411 3412 3413 3414
		mode_mask = ATA_DMA_MASK_ATA;
		if (dev->class == ATA_DEV_ATAPI)
			mode_mask = ATA_DMA_MASK_ATAPI;
		else if (ata_id_is_cfa(dev->id))
			mode_mask = ATA_DMA_MASK_CFA;

T
Tejun Heo 已提交
3415
		ata_dev_xfermask(dev);
3416
		ata_force_xfermask(dev);
L
Linus Torvalds 已提交
3417

3418 3419
		pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
		dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
3420 3421 3422 3423 3424 3425

		if (libata_dma_mask & mode_mask)
			dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
		else
			dma_mask = 0;

3426 3427
		dev->pio_mode = ata_xfer_mask2mode(pio_mask);
		dev->dma_mode = ata_xfer_mask2mode(dma_mask);
3428

3429
		found = 1;
3430
		if (ata_dma_enabled(dev))
3431
			used_dma = 1;
3432
	}
3433
	if (!found)
3434
		goto out;
3435 3436

	/* step 2: always set host PIO timings */
T
Tejun Heo 已提交
3437
	ata_for_each_dev(dev, link, ENABLED) {
3438
		if (dev->pio_mode == 0xff) {
3439
			ata_dev_printk(dev, KERN_WARNING, "no PIO support\n");
3440
			rc = -EINVAL;
3441
			goto out;
3442 3443 3444 3445 3446 3447 3448
		}

		dev->xfer_mode = dev->pio_mode;
		dev->xfer_shift = ATA_SHIFT_PIO;
		if (ap->ops->set_piomode)
			ap->ops->set_piomode(ap, dev);
	}
L
Linus Torvalds 已提交
3449

3450
	/* step 3: set host DMA timings */
T
Tejun Heo 已提交
3451 3452
	ata_for_each_dev(dev, link, ENABLED) {
		if (!ata_dma_enabled(dev))
3453 3454 3455 3456 3457 3458 3459
			continue;

		dev->xfer_mode = dev->dma_mode;
		dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode);
		if (ap->ops->set_dmamode)
			ap->ops->set_dmamode(ap, dev);
	}
L
Linus Torvalds 已提交
3460 3461

	/* step 4: update devices' xfer mode */
T
Tejun Heo 已提交
3462
	ata_for_each_dev(dev, link, ENABLED) {
T
Tejun Heo 已提交
3463
		rc = ata_dev_set_mode(dev);
3464
		if (rc)
3465
			goto out;
3466
	}
L
Linus Torvalds 已提交
3467

3468 3469
	/* Record simplex status. If we selected DMA then the other
	 * host channels are not permitted to do so.
3470
	 */
J
Jeff Garzik 已提交
3471
	if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX))
A
Alan 已提交
3472
		ap->host->simplex_claimed = ap;
3473

3474 3475 3476 3477
 out:
	if (rc)
		*r_failed_dev = dev;
	return rc;
L
Linus Torvalds 已提交
3478 3479
}

3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503
/**
 *	ata_wait_ready - wait for link to become ready
 *	@link: link to be waited on
 *	@deadline: deadline jiffies for the operation
 *	@check_ready: callback to check link readiness
 *
 *	Wait for @link to become ready.  @check_ready should return
 *	positive number if @link is ready, 0 if it isn't, -ENODEV if
 *	link doesn't seem to be occupied, other errno for other error
 *	conditions.
 *
 *	Transient -ENODEV conditions are allowed for
 *	ATA_TMOUT_FF_WAIT.
 *
 *	LOCKING:
 *	EH context.
 *
 *	RETURNS:
 *	0 if @linke is ready before @deadline; otherwise, -errno.
 */
int ata_wait_ready(struct ata_link *link, unsigned long deadline,
		   int (*check_ready)(struct ata_link *link))
{
	unsigned long start = jiffies;
3504
	unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
3505 3506
	int warned = 0;

T
Tejun Heo 已提交
3507 3508 3509 3510 3511 3512
	/* Slave readiness can't be tested separately from master.  On
	 * M/S emulation configuration, this function should be called
	 * only on the master and it will handle both master and slave.
	 */
	WARN_ON(link == link->ap->slave_link);

3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574
	if (time_after(nodev_deadline, deadline))
		nodev_deadline = deadline;

	while (1) {
		unsigned long now = jiffies;
		int ready, tmp;

		ready = tmp = check_ready(link);
		if (ready > 0)
			return 0;

		/* -ENODEV could be transient.  Ignore -ENODEV if link
		 * is online.  Also, some SATA devices take a long
		 * time to clear 0xff after reset.  For example,
		 * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
		 * GoVault needs even more than that.  Wait for
		 * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
		 *
		 * Note that some PATA controllers (pata_ali) explode
		 * if status register is read more than once when
		 * there's no device attached.
		 */
		if (ready == -ENODEV) {
			if (ata_link_online(link))
				ready = 0;
			else if ((link->ap->flags & ATA_FLAG_SATA) &&
				 !ata_link_offline(link) &&
				 time_before(now, nodev_deadline))
				ready = 0;
		}

		if (ready)
			return ready;
		if (time_after(now, deadline))
			return -EBUSY;

		if (!warned && time_after(now, start + 5 * HZ) &&
		    (deadline - now > 3 * HZ)) {
			ata_link_printk(link, KERN_WARNING,
				"link is slow to respond, please be patient "
				"(ready=%d)\n", tmp);
			warned = 1;
		}

		msleep(50);
	}
}

/**
 *	ata_wait_after_reset - wait for link to become ready after reset
 *	@link: link to be waited on
 *	@deadline: deadline jiffies for the operation
 *	@check_ready: callback to check link readiness
 *
 *	Wait for @link to become ready after reset.
 *
 *	LOCKING:
 *	EH context.
 *
 *	RETURNS:
 *	0 if @linke is ready before @deadline; otherwise, -errno.
 */
3575
int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
3576 3577
				int (*check_ready)(struct ata_link *link))
{
3578
	msleep(ATA_WAIT_AFTER_RESET);
3579 3580 3581 3582

	return ata_wait_ready(link, deadline, check_ready);
}

3583
/**
3584 3585
 *	sata_link_debounce - debounce SATA phy status
 *	@link: ATA link to debounce SATA phy status for
3586
 *	@params: timing parameters { interval, duratinon, timeout } in msec
3587
 *	@deadline: deadline jiffies for the operation
3588
 *
3589
*	Make sure SStatus of @link reaches stable state, determined by
3590 3591
 *	holding the same value where DET is not 1 for @duration polled
 *	every @interval, before @timeout.  Timeout constraints the
3592 3593
 *	beginning of the stable state.  Because DET gets stuck at 1 on
 *	some controllers after hot unplugging, this functions waits
3594 3595
 *	until timeout then returns 0 if DET is stable at 1.
 *
3596 3597 3598
 *	@timeout is further limited by @deadline.  The sooner of the
 *	two is used.
 *
3599 3600 3601 3602 3603 3604
 *	LOCKING:
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
3605 3606
int sata_link_debounce(struct ata_link *link, const unsigned long *params,
		       unsigned long deadline)
3607
{
3608 3609
	unsigned long interval = params[0];
	unsigned long duration = params[1];
3610
	unsigned long last_jiffies, t;
3611 3612 3613
	u32 last, cur;
	int rc;

3614
	t = ata_deadline(jiffies, params[2]);
3615 3616 3617
	if (time_before(t, deadline))
		deadline = t;

3618
	if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
3619 3620 3621 3622 3623 3624 3625
		return rc;
	cur &= 0xf;

	last = cur;
	last_jiffies = jiffies;

	while (1) {
3626
		msleep(interval);
3627
		if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
3628 3629 3630 3631 3632
			return rc;
		cur &= 0xf;

		/* DET stable? */
		if (cur == last) {
3633
			if (cur == 1 && time_before(jiffies, deadline))
3634
				continue;
3635 3636
			if (time_after(jiffies,
				       ata_deadline(last_jiffies, duration)))
3637 3638 3639 3640 3641 3642 3643 3644
				return 0;
			continue;
		}

		/* unstable, start over */
		last = cur;
		last_jiffies = jiffies;

3645 3646 3647
		/* Check deadline.  If debouncing failed, return
		 * -EPIPE to tell upper layer to lower link speed.
		 */
3648
		if (time_after(jiffies, deadline))
3649
			return -EPIPE;
3650 3651 3652 3653
	}
}

/**
3654 3655
 *	sata_link_resume - resume SATA link
 *	@link: ATA link to resume SATA
3656
 *	@params: timing parameters { interval, duratinon, timeout } in msec
3657
 *	@deadline: deadline jiffies for the operation
3658
 *
3659
 *	Resume SATA phy @link and debounce it.
3660 3661 3662 3663 3664 3665 3666
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
3667 3668
int sata_link_resume(struct ata_link *link, const unsigned long *params,
		     unsigned long deadline)
3669
{
3670
	u32 scontrol, serror;
3671 3672
	int rc;

3673
	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
3674
		return rc;
3675

3676
	scontrol = (scontrol & 0x0f0) | 0x300;
3677

3678
	if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
3679
		return rc;
3680

3681 3682 3683 3684
	/* Some PHYs react badly if SStatus is pounded immediately
	 * after resuming.  Delay 200ms before debouncing.
	 */
	msleep(200);
3685

3686 3687 3688
	if ((rc = sata_link_debounce(link, params, deadline)))
		return rc;

3689
	/* clear SError, some PHYs require this even for SRST to work */
3690 3691 3692
	if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
		rc = sata_scr_write(link, SCR_ERROR, serror);

3693
	return rc != -EINVAL ? rc : 0;
3694 3695
}

3696
/**
3697
 *	ata_std_prereset - prepare for reset
T
Tejun Heo 已提交
3698
 *	@link: ATA link to be reset
3699
 *	@deadline: deadline jiffies for the operation
3700
 *
T
Tejun Heo 已提交
3701
 *	@link is about to be reset.  Initialize it.  Failure from
T
Tejun Heo 已提交
3702 3703 3704 3705
 *	prereset makes libata abort whole reset sequence and give up
 *	that port, so prereset should be best-effort.  It does its
 *	best to prepare for reset sequence but if things go wrong, it
 *	should just whine, not fail.
3706 3707 3708 3709 3710 3711 3712
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 on success, -errno otherwise.
 */
3713
int ata_std_prereset(struct ata_link *link, unsigned long deadline)
3714
{
T
Tejun Heo 已提交
3715
	struct ata_port *ap = link->ap;
3716
	struct ata_eh_context *ehc = &link->eh_context;
3717
	const unsigned long *timing = sata_ehc_deb_timing(ehc);
3718 3719 3720 3721 3722 3723
	int rc;

	/* if we're about to do hardreset, nothing more to do */
	if (ehc->i.action & ATA_EH_HARDRESET)
		return 0;

3724
	/* if SATA, resume link */
3725
	if (ap->flags & ATA_FLAG_SATA) {
3726
		rc = sata_link_resume(link, timing, deadline);
T
Tejun Heo 已提交
3727 3728
		/* whine about phy resume failure but proceed */
		if (rc && rc != -EOPNOTSUPP)
T
Tejun Heo 已提交
3729
			ata_link_printk(link, KERN_WARNING, "failed to resume "
3730 3731 3732
					"link for reset (errno=%d)\n", rc);
	}

3733
	/* no point in trying softreset on offline link */
T
Tejun Heo 已提交
3734
	if (ata_phys_link_offline(link))
3735 3736
		ehc->i.action &= ~ATA_EH_SOFTRESET;

3737 3738 3739
	return 0;
}

3740
/**
T
Tejun Heo 已提交
3741 3742 3743
 *	sata_link_hardreset - reset link via SATA phy reset
 *	@link: link to reset
 *	@timing: timing parameters { interval, duratinon, timeout } in msec
3744
 *	@deadline: deadline jiffies for the operation
3745 3746
 *	@online: optional out parameter indicating link onlineness
 *	@check_ready: optional callback to check link readiness
3747
 *
T
Tejun Heo 已提交
3748
 *	SATA phy-reset @link using DET bits of SControl register.
3749 3750 3751 3752 3753 3754 3755 3756
 *	After hardreset, link readiness is waited upon using
 *	ata_wait_ready() if @check_ready is specified.  LLDs are
 *	allowed to not specify @check_ready and wait itself after this
 *	function returns.  Device classification is LLD's
 *	responsibility.
 *
 *	*@online is set to one iff reset succeeded and @link is online
 *	after reset.
3757 3758 3759 3760 3761 3762 3763
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 on success, -errno otherwise.
 */
T
Tejun Heo 已提交
3764
int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
3765 3766
			unsigned long deadline,
			bool *online, int (*check_ready)(struct ata_link *))
3767
{
T
Tejun Heo 已提交
3768
	u32 scontrol;
3769
	int rc;
3770

3771 3772
	DPRINTK("ENTER\n");

3773 3774 3775
	if (online)
		*online = false;

3776
	if (sata_set_spd_needed(link)) {
3777 3778 3779 3780 3781
		/* SATA spec says nothing about how to reconfigure
		 * spd.  To be on the safe side, turn off phy during
		 * reconfiguration.  This works for at least ICH7 AHCI
		 * and Sil3124.
		 */
3782
		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
3783
			goto out;
3784

3785
		scontrol = (scontrol & 0x0f0) | 0x304;
3786

3787
		if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
3788
			goto out;
3789

3790
		sata_set_spd(link);
3791 3792 3793
	}

	/* issue phy wake/reset */
3794
	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
3795
		goto out;
3796

3797
	scontrol = (scontrol & 0x0f0) | 0x301;
3798

3799
	if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol)))
3800
		goto out;
3801

3802
	/* Couldn't find anything in SATA I/II specs, but AHCI-1.1
3803 3804 3805 3806
	 * 10.4.2 says at least 1 ms.
	 */
	msleep(1);

3807 3808
	/* bring link back */
	rc = sata_link_resume(link, timing, deadline);
3809 3810 3811
	if (rc)
		goto out;
	/* if link is offline nothing more to do */
T
Tejun Heo 已提交
3812
	if (ata_phys_link_offline(link))
3813 3814 3815 3816 3817 3818
		goto out;

	/* Link is online.  From this point, -ENODEV too is an error. */
	if (online)
		*online = true;

T
Tejun Heo 已提交
3819
	if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
3820 3821 3822 3823 3824 3825 3826 3827
		/* If PMP is supported, we have to do follow-up SRST.
		 * Some PMPs don't send D2H Reg FIS after hardreset if
		 * the first port is empty.  Wait only for
		 * ATA_TMOUT_PMP_SRST_WAIT.
		 */
		if (check_ready) {
			unsigned long pmp_deadline;

3828 3829
			pmp_deadline = ata_deadline(jiffies,
						    ATA_TMOUT_PMP_SRST_WAIT);
3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840
			if (time_after(pmp_deadline, deadline))
				pmp_deadline = deadline;
			ata_wait_ready(link, pmp_deadline, check_ready);
		}
		rc = -EAGAIN;
		goto out;
	}

	rc = 0;
	if (check_ready)
		rc = ata_wait_ready(link, deadline, check_ready);
3841
 out:
3842 3843 3844 3845
	if (rc && rc != -EAGAIN) {
		/* online is set iff link is online && reset succeeded */
		if (online)
			*online = false;
3846 3847
		ata_link_printk(link, KERN_ERR,
				"COMRESET failed (errno=%d)\n", rc);
3848
	}
3849 3850 3851 3852
	DPRINTK("EXIT, rc=%d\n", rc);
	return rc;
}

3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878
/**
 *	sata_std_hardreset - COMRESET w/o waiting or classification
 *	@link: link to reset
 *	@class: resulting class of attached device
 *	@deadline: deadline jiffies for the operation
 *
 *	Standard SATA COMRESET w/o waiting or classification.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 if link offline, -EAGAIN if link online, -errno on errors.
 */
int sata_std_hardreset(struct ata_link *link, unsigned int *class,
		       unsigned long deadline)
{
	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
	bool online;
	int rc;

	/* do hardreset */
	rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
	return online ? -EAGAIN : rc;
}

3879
/**
3880
 *	ata_std_postreset - standard postreset callback
T
Tejun Heo 已提交
3881
 *	@link: the target ata_link
3882 3883 3884 3885 3886 3887 3888 3889 3890
 *	@classes: classes of attached devices
 *
 *	This function is invoked after a successful reset.  Note that
 *	the device might have been reset more than once using
 *	different reset methods before postreset is invoked.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 */
3891
void ata_std_postreset(struct ata_link *link, unsigned int *classes)
3892
{
3893 3894
	u32 serror;

3895 3896
	DPRINTK("ENTER\n");

3897 3898 3899 3900
	/* reset complete, clear SError */
	if (!sata_scr_read(link, SCR_ERROR, &serror))
		sata_scr_write(link, SCR_ERROR, serror);

3901
	/* print link status */
3902
	sata_print_link_status(link);
3903 3904 3905 3906

	DPRINTK("EXIT\n");
}

3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922
/**
 *	ata_dev_same_device - Determine whether new ID matches configured device
 *	@dev: device to compare against
 *	@new_class: class of the new device
 *	@new_id: IDENTIFY page of the new device
 *
 *	Compare @new_class and @new_id against @dev and determine
 *	whether @dev is the device indicated by @new_class and
 *	@new_id.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	1 if @dev matches @new_class and @new_id, 0 otherwise.
 */
T
Tejun Heo 已提交
3923 3924
static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
			       const u16 *new_id)
3925 3926
{
	const u16 *old_id = dev->id;
3927 3928
	unsigned char model[2][ATA_ID_PROD_LEN + 1];
	unsigned char serial[2][ATA_ID_SERNO_LEN + 1];
3929 3930

	if (dev->class != new_class) {
3931 3932
		ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n",
			       dev->class, new_class);
3933 3934 3935
		return 0;
	}

3936 3937 3938 3939
	ata_id_c_string(old_id, model[0], ATA_ID_PROD, sizeof(model[0]));
	ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1]));
	ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0]));
	ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1]));
3940 3941

	if (strcmp(model[0], model[1])) {
3942 3943
		ata_dev_printk(dev, KERN_INFO, "model number mismatch "
			       "'%s' != '%s'\n", model[0], model[1]);
3944 3945 3946 3947
		return 0;
	}

	if (strcmp(serial[0], serial[1])) {
3948 3949
		ata_dev_printk(dev, KERN_INFO, "serial number mismatch "
			       "'%s' != '%s'\n", serial[0], serial[1]);
3950 3951 3952 3953 3954 3955 3956
		return 0;
	}

	return 1;
}

/**
3957
 *	ata_dev_reread_id - Re-read IDENTIFY data
H
Henrik Kretzschmar 已提交
3958
 *	@dev: target ATA device
3959
 *	@readid_flags: read ID flags
3960 3961 3962 3963 3964 3965 3966 3967 3968 3969
 *
 *	Re-read IDENTIFY page and make sure @dev is still attached to
 *	the port.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 on success, negative errno otherwise
 */
3970
int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
3971
{
3972
	unsigned int class = dev->class;
T
Tejun Heo 已提交
3973
	u16 *id = (void *)dev->link->ap->sector_buf;
3974 3975
	int rc;

3976
	/* read ID data */
3977
	rc = ata_dev_read_id(dev, &class, readid_flags, id);
3978
	if (rc)
3979
		return rc;
3980 3981

	/* is the device still there? */
3982 3983
	if (!ata_dev_same_device(dev, class, id))
		return -ENODEV;
3984

3985
	memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
3986 3987 3988 3989 3990 3991
	return 0;
}

/**
 *	ata_dev_revalidate - Revalidate ATA device
 *	@dev: device to revalidate
3992
 *	@new_class: new class code
3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003
 *	@readid_flags: read ID flags
 *
 *	Re-read IDENTIFY page, make sure @dev is still attached to the
 *	port and reconfigure it according to the new IDENTIFY page.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 on success, negative errno otherwise
 */
4004 4005
int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
		       unsigned int readid_flags)
4006
{
4007
	u64 n_sectors = dev->n_sectors;
4008 4009 4010 4011 4012
	int rc;

	if (!ata_dev_enabled(dev))
		return -ENODEV;

4013 4014 4015 4016 4017 4018 4019 4020 4021
	/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
	if (ata_class_enabled(new_class) &&
	    new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
		ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
			       dev->class, new_class);
		rc = -ENODEV;
		goto fail;
	}

4022 4023 4024 4025
	/* re-read ID */
	rc = ata_dev_reread_id(dev, readid_flags);
	if (rc)
		goto fail;
4026 4027

	/* configure device according to the new ID */
4028
	rc = ata_dev_configure(dev);
4029 4030 4031 4032
	if (rc)
		goto fail;

	/* verify n_sectors hasn't changed */
4033 4034
	if (dev->class == ATA_DEV_ATA && n_sectors &&
	    dev->n_sectors != n_sectors) {
4035 4036 4037 4038
		ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
			       "%llu != %llu\n",
			       (unsigned long long)n_sectors,
			       (unsigned long long)dev->n_sectors);
4039 4040 4041 4042

		/* restore original n_sectors */
		dev->n_sectors = n_sectors;

4043 4044 4045 4046 4047
		rc = -ENODEV;
		goto fail;
	}

	return 0;
4048 4049

 fail:
4050
	ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc);
4051 4052 4053
	return rc;
}

4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089
struct ata_blacklist_entry {
	const char *model_num;
	const char *model_rev;
	unsigned long horkage;
};

static const struct ata_blacklist_entry ata_device_blacklist [] = {
	/* Devices with DMA related problems under Linux */
	{ "WDC AC11000H",	NULL,		ATA_HORKAGE_NODMA },
	{ "WDC AC22100H",	NULL,		ATA_HORKAGE_NODMA },
	{ "WDC AC32500H",	NULL,		ATA_HORKAGE_NODMA },
	{ "WDC AC33100H",	NULL,		ATA_HORKAGE_NODMA },
	{ "WDC AC31600H",	NULL,		ATA_HORKAGE_NODMA },
	{ "WDC AC32100H",	"24.09P07",	ATA_HORKAGE_NODMA },
	{ "WDC AC23200L",	"21.10N21",	ATA_HORKAGE_NODMA },
	{ "Compaq CRD-8241B", 	NULL,		ATA_HORKAGE_NODMA },
	{ "CRD-8400B",		NULL, 		ATA_HORKAGE_NODMA },
	{ "CRD-8480B",		NULL,		ATA_HORKAGE_NODMA },
	{ "CRD-8482B",		NULL,		ATA_HORKAGE_NODMA },
	{ "CRD-84",		NULL,		ATA_HORKAGE_NODMA },
	{ "SanDisk SDP3B",	NULL,		ATA_HORKAGE_NODMA },
	{ "SanDisk SDP3B-64",	NULL,		ATA_HORKAGE_NODMA },
	{ "SANYO CD-ROM CRD",	NULL,		ATA_HORKAGE_NODMA },
	{ "HITACHI CDR-8",	NULL,		ATA_HORKAGE_NODMA },
	{ "HITACHI CDR-8335",	NULL,		ATA_HORKAGE_NODMA },
	{ "HITACHI CDR-8435",	NULL,		ATA_HORKAGE_NODMA },
	{ "Toshiba CD-ROM XM-6202B", NULL,	ATA_HORKAGE_NODMA },
	{ "TOSHIBA CD-ROM XM-1702BC", NULL,	ATA_HORKAGE_NODMA },
	{ "CD-532E-A", 		NULL,		ATA_HORKAGE_NODMA },
	{ "E-IDE CD-ROM CR-840",NULL,		ATA_HORKAGE_NODMA },
	{ "CD-ROM Drive/F5A",	NULL,		ATA_HORKAGE_NODMA },
	{ "WPI CDD-820", 	NULL,		ATA_HORKAGE_NODMA },
	{ "SAMSUNG CD-ROM SC-148C", NULL,	ATA_HORKAGE_NODMA },
	{ "SAMSUNG CD-ROM SC",	NULL,		ATA_HORKAGE_NODMA },
	{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
	{ "_NEC DV5800A", 	NULL,		ATA_HORKAGE_NODMA },
4090
	{ "SAMSUNG CD-ROM SN-124", "N001",	ATA_HORKAGE_NODMA },
4091
	{ "Seagate STT20000A", NULL,		ATA_HORKAGE_NODMA },
4092
	/* Odd clown on sil3726/4726 PMPs */
4093
	{ "Config  Disk",	NULL,		ATA_HORKAGE_DISABLE },
4094

4095
	/* Weird ATAPI devices */
T
Tejun Heo 已提交
4096
	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 },
4097
	{ "QUANTUM DAT    DAT72-000", NULL,	ATA_HORKAGE_ATAPI_MOD16_DMA },
4098

4099 4100 4101 4102
	/* Devices we expect to fail diagnostics */

	/* Devices where NCQ should be avoided */
	/* NCQ is slow */
4103
	{ "WDC WD740ADFD-00",	NULL,		ATA_HORKAGE_NONCQ },
4104
	{ "WDC WD740ADFD-00NLR1", NULL,		ATA_HORKAGE_NONCQ, },
4105 4106
	/* http://thread.gmane.org/gmane.linux.ide/14907 */
	{ "FUJITSU MHT2060BH",	NULL,		ATA_HORKAGE_NONCQ },
4107
	/* NCQ is broken */
4108
	{ "Maxtor *",		"BANC*",	ATA_HORKAGE_NONCQ },
4109
	{ "Maxtor 7V300F0",	"VA111630",	ATA_HORKAGE_NONCQ },
4110
	{ "ST380817AS",		"3.42",		ATA_HORKAGE_NONCQ },
4111
	{ "ST3160023AS",	"3.42",		ATA_HORKAGE_NONCQ },
4112
	{ "OCZ CORE_SSD",	"02.10104",	ATA_HORKAGE_NONCQ },
4113

4114
	/* Seagate NCQ + FLUSH CACHE firmware bug */
4115
	{ "ST31500341AS",	"SD15",		ATA_HORKAGE_NONCQ |
4116
						ATA_HORKAGE_FIRMWARE_WARN },
4117
	{ "ST31500341AS",	"SD16",		ATA_HORKAGE_NONCQ |
4118
						ATA_HORKAGE_FIRMWARE_WARN },
4119
	{ "ST31500341AS",	"SD17",		ATA_HORKAGE_NONCQ |
4120
						ATA_HORKAGE_FIRMWARE_WARN },
4121
	{ "ST31500341AS",	"SD18",		ATA_HORKAGE_NONCQ |
4122
						ATA_HORKAGE_FIRMWARE_WARN },
4123
	{ "ST31500341AS",	"SD19",		ATA_HORKAGE_NONCQ |
4124
						ATA_HORKAGE_FIRMWARE_WARN },
4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 4146 4147 4148 4149 4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178

	{ "ST31000333AS",	"SD15",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST31000333AS",	"SD16",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST31000333AS",	"SD17",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST31000333AS",	"SD18",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST31000333AS",	"SD19",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },

	{ "ST3640623AS",	"SD15",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3640623AS",	"SD16",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3640623AS",	"SD17",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3640623AS",	"SD18",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3640623AS",	"SD19",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },

	{ "ST3640323AS",	"SD15",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3640323AS",	"SD16",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3640323AS",	"SD17",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3640323AS",	"SD18",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3640323AS",	"SD19",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },

	{ "ST3320813AS",	"SD15",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3320813AS",	"SD16",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3320813AS",	"SD17",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3320813AS",	"SD18",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3320813AS",	"SD19",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },

	{ "ST3320613AS",	"SD15",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3320613AS",	"SD16",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3320613AS",	"SD17",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3320613AS",	"SD18",		ATA_HORKAGE_NONCQ |
						ATA_HORKAGE_FIRMWARE_WARN },
	{ "ST3320613AS",	"SD19",		ATA_HORKAGE_NONCQ |
4179 4180
						ATA_HORKAGE_FIRMWARE_WARN },

4181 4182 4183 4184 4185
	/* Blacklist entries taken from Silicon Image 3124/3132
	   Windows driver .inf file - also several Linux problem reports */
	{ "HTS541060G9SA00",    "MB3OC60D",     ATA_HORKAGE_NONCQ, },
	{ "HTS541080G9SA00",    "MB4OC60D",     ATA_HORKAGE_NONCQ, },
	{ "HTS541010G9SA00",    "MBZOC60D",     ATA_HORKAGE_NONCQ, },
4186

4187 4188 4189 4190 4191
	/* devices which puke on READ_NATIVE_MAX */
	{ "HDS724040KLSA80",	"KFAOA20N",	ATA_HORKAGE_BROKEN_HPA, },
	{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
	{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
	{ "MAXTOR 6L080L4",	"A93.0500",	ATA_HORKAGE_BROKEN_HPA },
4192

4193 4194 4195
	/* Devices which report 1 sector over size HPA */
	{ "ST340823A",		NULL,		ATA_HORKAGE_HPA_SIZE, },
	{ "ST320413A",		NULL,		ATA_HORKAGE_HPA_SIZE, },
4196
	{ "ST310211A",		NULL,		ATA_HORKAGE_HPA_SIZE, },
4197

A
Alan Cox 已提交
4198 4199
	/* Devices which get the IVB wrong */
	{ "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
4200 4201 4202
	/* Maybe we should just blacklist TSSTcorp... */
	{ "TSSTcorp CDDVDW SH-S202H", "SB00",	  ATA_HORKAGE_IVB, },
	{ "TSSTcorp CDDVDW SH-S202H", "SB01",	  ATA_HORKAGE_IVB, },
A
Alan Cox 已提交
4203
	{ "TSSTcorp CDDVDW SH-S202J", "SB00",	  ATA_HORKAGE_IVB, },
P
Peter Missel 已提交
4204 4205 4206
	{ "TSSTcorp CDDVDW SH-S202J", "SB01",	  ATA_HORKAGE_IVB, },
	{ "TSSTcorp CDDVDW SH-S202N", "SB00",	  ATA_HORKAGE_IVB, },
	{ "TSSTcorp CDDVDW SH-S202N", "SB01",	  ATA_HORKAGE_IVB, },
A
Alan Cox 已提交
4207

4208 4209 4210
	/* Devices that do not need bridging limits applied */
	{ "MTRON MSP-SATA*",		NULL,	ATA_HORKAGE_BRIDGE_OK, },

4211 4212
	/* End Marker */
	{ }
L
Linus Torvalds 已提交
4213
};
4214

4215
static int strn_pattern_cmp(const char *patt, const char *name, int wildchar)
4216 4217 4218 4219 4220 4221 4222 4223 4224 4225
{
	const char *p;
	int len;

	/*
	 * check for trailing wildcard: *\0
	 */
	p = strchr(patt, wildchar);
	if (p && ((*(p + 1)) == 0))
		len = p - patt;
4226
	else {
4227
		len = strlen(name);
4228 4229 4230 4231 4232 4233
		if (!len) {
			if (!*patt)
				return 0;
			return -1;
		}
	}
4234 4235 4236 4237

	return strncmp(patt, name, len);
}

T
Tejun Heo 已提交
4238
static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
L
Linus Torvalds 已提交
4239
{
T
Tejun Heo 已提交
4240 4241
	unsigned char model_num[ATA_ID_PROD_LEN + 1];
	unsigned char model_rev[ATA_ID_FW_REV_LEN + 1];
4242
	const struct ata_blacklist_entry *ad = ata_device_blacklist;
4243

T
Tejun Heo 已提交
4244 4245
	ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
	ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev));
L
Linus Torvalds 已提交
4246

4247
	while (ad->model_num) {
4248
		if (!strn_pattern_cmp(ad->model_num, model_num, '*')) {
4249 4250
			if (ad->model_rev == NULL)
				return ad->horkage;
4251
			if (!strn_pattern_cmp(ad->model_rev, model_rev, '*'))
4252
				return ad->horkage;
4253
		}
4254
		ad++;
4255
	}
L
Linus Torvalds 已提交
4256 4257 4258
	return 0;
}

4259 4260 4261 4262 4263 4264
static int ata_dma_blacklisted(const struct ata_device *dev)
{
	/* We don't support polling DMA.
	 * DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
	 * if the LLDD handles only interrupts in the HSM_ST_LAST state.
	 */
T
Tejun Heo 已提交
4265
	if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) &&
4266 4267
	    (dev->flags & ATA_DFLAG_CDB_INTR))
		return 1;
T
Tejun Heo 已提交
4268
	return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0;
4269 4270
}

A
Alan Cox 已提交
4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285
/**
 *	ata_is_40wire		-	check drive side detection
 *	@dev: device
 *
 *	Perform drive side detection decoding, allowing for device vendors
 *	who can't follow the documentation.
 */

static int ata_is_40wire(struct ata_device *dev)
{
	if (dev->horkage & ATA_HORKAGE_IVB)
		return ata_drive_40wire_relaxed(dev->id);
	return ata_drive_40wire(dev->id);
}

4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 4302 4303
/**
 *	cable_is_40wire		-	40/80/SATA decider
 *	@ap: port to consider
 *
 *	This function encapsulates the policy for speed management
 *	in one place. At the moment we don't cache the result but
 *	there is a good case for setting ap->cbl to the result when
 *	we are called with unknown cables (and figuring out if it
 *	impacts hotplug at all).
 *
 *	Return 1 if the cable appears to be 40 wire.
 */

static int cable_is_40wire(struct ata_port *ap)
{
	struct ata_link *link;
	struct ata_device *dev;

T
Tejun Heo 已提交
4304
	/* If the controller thinks we are 40 wire, we are. */
4305 4306
	if (ap->cbl == ATA_CBL_PATA40)
		return 1;
T
Tejun Heo 已提交
4307 4308

	/* If the controller thinks we are 80 wire, we are. */
4309 4310
	if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
		return 0;
T
Tejun Heo 已提交
4311 4312 4313 4314 4315

	/* If the system is known to be 40 wire short cable (eg
	 * laptop), then we allow 80 wire modes even if the drive
	 * isn't sure.
	 */
A
Alan Cox 已提交
4316 4317
	if (ap->cbl == ATA_CBL_PATA40_SHORT)
		return 0;
T
Tejun Heo 已提交
4318 4319 4320 4321 4322 4323 4324 4325 4326 4327

	/* If the controller doesn't know, we scan.
	 *
	 * Note: We look for all 40 wire detects at this point.  Any
	 *       80 wire detect is taken to be 80 wire cable because
	 * - in many setups only the one drive (slave if present) will
	 *   give a valid detect
	 * - if you have a non detect capable drive you don't want it
	 *   to colour the choice
	 */
T
Tejun Heo 已提交
4328 4329 4330
	ata_for_each_link(link, ap, EDGE) {
		ata_for_each_dev(dev, link, ENABLED) {
			if (!ata_is_40wire(dev))
4331 4332 4333 4334 4335 4336
				return 0;
		}
	}
	return 1;
}

4337 4338 4339 4340
/**
 *	ata_dev_xfermask - Compute supported xfermask of the given device
 *	@dev: Device to compute xfermask for
 *
4341 4342 4343 4344
 *	Compute supported xfermask of @dev and store it in
 *	dev->*_mask.  This function is responsible for applying all
 *	known limits including host controller limits, device
 *	blacklist, etc...
4345 4346 4347 4348
 *
 *	LOCKING:
 *	None.
 */
T
Tejun Heo 已提交
4349
static void ata_dev_xfermask(struct ata_device *dev)
L
Linus Torvalds 已提交
4350
{
T
Tejun Heo 已提交
4351 4352
	struct ata_link *link = dev->link;
	struct ata_port *ap = link->ap;
J
Jeff Garzik 已提交
4353
	struct ata_host *host = ap->host;
4354
	unsigned long xfer_mask;
L
Linus Torvalds 已提交
4355

4356
	/* controller modes available */
4357 4358 4359
	xfer_mask = ata_pack_xfermask(ap->pio_mask,
				      ap->mwdma_mask, ap->udma_mask);

4360
	/* drive modes available */
4361 4362 4363
	xfer_mask &= ata_pack_xfermask(dev->pio_mask,
				       dev->mwdma_mask, dev->udma_mask);
	xfer_mask &= ata_id_xfermask(dev->id);
4364

4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375
	/*
	 *	CFA Advanced TrueIDE timings are not allowed on a shared
	 *	cable
	 */
	if (ata_dev_pair(dev)) {
		/* No PIO5 or PIO6 */
		xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5));
		/* No MWDMA3 or MWDMA 4 */
		xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3));
	}

4376 4377
	if (ata_dma_blacklisted(dev)) {
		xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
4378 4379
		ata_dev_printk(dev, KERN_WARNING,
			       "device is on DMA blacklist, disabling DMA\n");
4380
	}
4381

4382
	if ((host->flags & ATA_HOST_SIMPLEX) &&
4383
	    host->simplex_claimed && host->simplex_claimed != ap) {
4384 4385 4386
		xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
		ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by "
			       "other device, disabling DMA\n");
4387
	}
4388

J
Jeff Garzik 已提交
4389 4390 4391
	if (ap->flags & ATA_FLAG_NO_IORDY)
		xfer_mask &= ata_pio_mask_no_iordy(dev);

4392
	if (ap->ops->mode_filter)
4393
		xfer_mask = ap->ops->mode_filter(dev, xfer_mask);
4394

4395 4396 4397 4398 4399 4400 4401 4402 4403 4404
	/* Apply cable rule here.  Don't apply it early because when
	 * we handle hot plug the cable type can itself change.
	 * Check this last so that we know if the transfer rate was
	 * solely limited by the cable.
	 * Unknown or 80 wire cables reported host side are checked
	 * drive side as well. Cases where we know a 40wire cable
	 * is used safely for 80 are not checked here.
	 */
	if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
		/* UDMA/44 or higher would be available */
4405
		if (cable_is_40wire(ap)) {
4406
			ata_dev_printk(dev, KERN_WARNING,
4407 4408 4409 4410
				 "limited to UDMA/33 due to 40-wire cable\n");
			xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
		}

4411 4412
	ata_unpack_xfermask(xfer_mask, &dev->pio_mask,
			    &dev->mwdma_mask, &dev->udma_mask);
L
Linus Torvalds 已提交
4413 4414 4415 4416 4417 4418
}

/**
 *	ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
 *	@dev: Device to which command will be sent
 *
J
Jeff Garzik 已提交
4419 4420 4421
 *	Issue SET FEATURES - XFER MODE command to device @dev
 *	on port @ap.
 *
L
Linus Torvalds 已提交
4422
 *	LOCKING:
J
Jeff Garzik 已提交
4423
 *	PCI/etc. bus probe sem.
4424 4425 4426
 *
 *	RETURNS:
 *	0 on success, AC_ERR_* mask otherwise.
L
Linus Torvalds 已提交
4427 4428
 */

T
Tejun Heo 已提交
4429
static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
L
Linus Torvalds 已提交
4430
{
4431
	struct ata_taskfile tf;
4432
	unsigned int err_mask;
L
Linus Torvalds 已提交
4433 4434 4435 4436

	/* set up set-features taskfile */
	DPRINTK("set features - xfer mode\n");

T
Tejun Heo 已提交
4437 4438 4439
	/* Some controllers and ATAPI devices show flaky interrupt
	 * behavior after setting xfer mode.  Use polling instead.
	 */
T
Tejun Heo 已提交
4440
	ata_tf_init(dev, &tf);
4441 4442
	tf.command = ATA_CMD_SET_FEATURES;
	tf.feature = SETFEATURES_XFER;
T
Tejun Heo 已提交
4443
	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING;
4444
	tf.protocol = ATA_PROT_NODATA;
A
Alan Cox 已提交
4445
	/* If we are using IORDY we must send the mode setting command */
J
Jeff Garzik 已提交
4446 4447
	if (ata_pio_need_iordy(dev))
		tf.nsect = dev->xfer_mode;
A
Alan Cox 已提交
4448 4449
	/* If the device has IORDY and the controller does not - turn it off */
 	else if (ata_id_has_iordy(dev->id))
J
Jeff Garzik 已提交
4450
		tf.nsect = 0x01;
A
Alan Cox 已提交
4451 4452
	else /* In the ancient relic department - skip all of this */
		return 0;
L
Linus Torvalds 已提交
4453

4454
	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
4455 4456 4457 4458 4459

	DPRINTK("EXIT, err_mask=%x\n", err_mask);
	return err_mask;
}
/**
4460
 *	ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES
4461 4462
 *	@dev: Device to which command will be sent
 *	@enable: Whether to enable or disable the feature
4463
 *	@feature: The sector count represents the feature to set
4464 4465
 *
 *	Issue SET FEATURES - SATA FEATURES command to device @dev
4466
 *	on port @ap with sector count
4467 4468 4469 4470 4471 4472 4473
 *
 *	LOCKING:
 *	PCI/etc. bus probe sem.
 *
 *	RETURNS:
 *	0 on success, AC_ERR_* mask otherwise.
 */
4474 4475
static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable,
					u8 feature)
4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487
{
	struct ata_taskfile tf;
	unsigned int err_mask;

	/* set up set-features taskfile */
	DPRINTK("set features - SATA features\n");

	ata_tf_init(dev, &tf);
	tf.command = ATA_CMD_SET_FEATURES;
	tf.feature = enable;
	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
	tf.protocol = ATA_PROT_NODATA;
4488
	tf.nsect = feature;
4489

4490
	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
L
Linus Torvalds 已提交
4491

4492 4493
	DPRINTK("EXIT, err_mask=%x\n", err_mask);
	return err_mask;
L
Linus Torvalds 已提交
4494 4495
}

4496 4497 4498
/**
 *	ata_dev_init_params - Issue INIT DEV PARAMS command
 *	@dev: Device to which command will be sent
4499 4500
 *	@heads: Number of heads (taskfile parameter)
 *	@sectors: Number of sectors (taskfile parameter)
4501 4502
 *
 *	LOCKING:
4503 4504 4505 4506
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	0 on success, AC_ERR_* mask otherwise.
4507
 */
T
Tejun Heo 已提交
4508 4509
static unsigned int ata_dev_init_params(struct ata_device *dev,
					u16 heads, u16 sectors)
4510
{
4511
	struct ata_taskfile tf;
4512
	unsigned int err_mask;
4513 4514 4515

	/* Number of sectors per track 1-255. Number of heads 1-16 */
	if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
4516
		return AC_ERR_INVALID;
4517 4518 4519 4520

	/* set up init dev params taskfile */
	DPRINTK("init dev params \n");

T
Tejun Heo 已提交
4521
	ata_tf_init(dev, &tf);
4522 4523 4524 4525 4526
	tf.command = ATA_CMD_INIT_DEV_PARAMS;
	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
	tf.protocol = ATA_PROT_NODATA;
	tf.nsect = sectors;
	tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
4527

4528
	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
4529 4530 4531 4532 4533
	/* A clean abort indicates an original or just out of spec drive
	   and we should continue as we issue the setup based on the
	   drive reported working geometry */
	if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
		err_mask = 0;
4534

4535 4536
	DPRINTK("EXIT, err_mask=%x\n", err_mask);
	return err_mask;
4537 4538
}

L
Linus Torvalds 已提交
4539
/**
J
Jeff Garzik 已提交
4540 4541 4542 4543
 *	ata_sg_clean - Unmap DMA memory associated with command
 *	@qc: Command containing DMA memory to be released
 *
 *	Unmap all mapped DMA memory associated with this command.
L
Linus Torvalds 已提交
4544 4545
 *
 *	LOCKING:
J
Jeff Garzik 已提交
4546
 *	spin_lock_irqsave(host lock)
L
Linus Torvalds 已提交
4547
 */
4548
void ata_sg_clean(struct ata_queued_cmd *qc)
L
Linus Torvalds 已提交
4549 4550
{
	struct ata_port *ap = qc->ap;
T
Tejun Heo 已提交
4551
	struct scatterlist *sg = qc->sg;
L
Linus Torvalds 已提交
4552 4553
	int dir = qc->dma_dir;

4554
	WARN_ON_ONCE(sg == NULL);
L
Linus Torvalds 已提交
4555

4556
	VPRINTK("unmapping %u sg elements\n", qc->n_elem);
L
Linus Torvalds 已提交
4557

4558 4559
	if (qc->n_elem)
		dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
L
Linus Torvalds 已提交
4560 4561

	qc->flags &= ~ATA_QCFLAG_DMAMAP;
T
Tejun Heo 已提交
4562
	qc->sg = NULL;
L
Linus Torvalds 已提交
4563 4564 4565
}

/**
4566
 *	atapi_check_dma - Check whether ATAPI DMA can be supported
L
Linus Torvalds 已提交
4567 4568
 *	@qc: Metadata associated with taskfile to check
 *
J
Jeff Garzik 已提交
4569 4570 4571 4572
 *	Allow low-level driver to filter ATA PACKET commands, returning
 *	a status indicating whether or not it is OK to use DMA for the
 *	supplied PACKET command.
 *
L
Linus Torvalds 已提交
4573
 *	LOCKING:
T
Tejun Heo 已提交
4574 4575 4576 4577 4578
 *	spin_lock_irqsave(host lock)
 *
 *	RETURNS: 0 when ATAPI DMA can be used
 *               nonzero otherwise
 */
4579
int atapi_check_dma(struct ata_queued_cmd *qc)
T
Tejun Heo 已提交
4580 4581
{
	struct ata_port *ap = qc->ap;
4582

T
Tejun Heo 已提交
4583 4584 4585
	/* Don't allow DMA if it isn't multiple of 16 bytes.  Quite a
	 * few ATAPI devices choke on such DMA requests.
	 */
4586 4587
	if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
	    unlikely(qc->nbytes & 15))
T
Tejun Heo 已提交
4588
		return 1;
4589

T
Tejun Heo 已提交
4590 4591
	if (ap->ops->check_atapi_dma)
		return ap->ops->check_atapi_dma(qc);
4592

T
Tejun Heo 已提交
4593 4594
	return 0;
}
L
Linus Torvalds 已提交
4595

T
Tejun Heo 已提交
4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613
/**
 *	ata_std_qc_defer - Check whether a qc needs to be deferred
 *	@qc: ATA command in question
 *
 *	Non-NCQ commands cannot run with any other command, NCQ or
 *	not.  As upper layer only knows the queue depth, we are
 *	responsible for maintaining exclusion.  This function checks
 *	whether a new command @qc can be issued.
 *
 *	LOCKING:
 *	spin_lock_irqsave(host lock)
 *
 *	RETURNS:
 *	ATA_DEFER_* if deferring is needed, 0 otherwise.
 */
int ata_std_qc_defer(struct ata_queued_cmd *qc)
{
	struct ata_link *link = qc->dev->link;
4614

T
Tejun Heo 已提交
4615 4616 4617 4618 4619 4620 4621
	if (qc->tf.protocol == ATA_PROT_NCQ) {
		if (!ata_tag_valid(link->active_tag))
			return 0;
	} else {
		if (!ata_tag_valid(link->active_tag) && !link->sactive)
			return 0;
	}
4622

T
Tejun Heo 已提交
4623 4624
	return ATA_DEFER_LINK;
}
4625

T
Tejun Heo 已提交
4626
void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
L
Linus Torvalds 已提交
4627

T
Tejun Heo 已提交
4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647
/**
 *	ata_sg_init - Associate command with scatter-gather table.
 *	@qc: Command to be associated
 *	@sg: Scatter-gather table.
 *	@n_elem: Number of elements in s/g table.
 *
 *	Initialize the data-related elements of queued_cmd @qc
 *	to point to a scatter-gather table @sg, containing @n_elem
 *	elements.
 *
 *	LOCKING:
 *	spin_lock_irqsave(host lock)
 */
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
		 unsigned int n_elem)
{
	qc->sg = sg;
	qc->n_elem = n_elem;
	qc->cursg = qc->sg;
}
4648

T
Tejun Heo 已提交
4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665
/**
 *	ata_sg_setup - DMA-map the scatter-gather table associated with a command.
 *	@qc: Command with scatter-gather table to be mapped.
 *
 *	DMA-map the scatter-gather table associated with queued_cmd @qc.
 *
 *	LOCKING:
 *	spin_lock_irqsave(host lock)
 *
 *	RETURNS:
 *	Zero on success, negative on error.
 *
 */
static int ata_sg_setup(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	unsigned int n_elem;
L
Linus Torvalds 已提交
4666

T
Tejun Heo 已提交
4667
	VPRINTK("ENTER, ata%u\n", ap->print_id);
4668

T
Tejun Heo 已提交
4669 4670 4671
	n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir);
	if (n_elem < 1)
		return -1;
4672

T
Tejun Heo 已提交
4673
	DPRINTK("%d sg elements mapped\n", n_elem);
4674

T
Tejun Heo 已提交
4675 4676
	qc->n_elem = n_elem;
	qc->flags |= ATA_QCFLAG_DMAMAP;
L
Linus Torvalds 已提交
4677

T
Tejun Heo 已提交
4678
	return 0;
L
Linus Torvalds 已提交
4679 4680
}

T
Tejun Heo 已提交
4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693
/**
 *	swap_buf_le16 - swap halves of 16-bit words in place
 *	@buf:  Buffer to swap
 *	@buf_words:  Number of 16-bit words in buffer.
 *
 *	Swap halves of 16-bit words if needed to convert from
 *	little-endian byte order to native cpu byte order, or
 *	vice-versa.
 *
 *	LOCKING:
 *	Inherited from caller.
 */
void swap_buf_le16(u16 *buf, unsigned int buf_words)
4694
{
T
Tejun Heo 已提交
4695 4696
#ifdef __BIG_ENDIAN
	unsigned int i;
4697

T
Tejun Heo 已提交
4698 4699 4700
	for (i = 0; i < buf_words; i++)
		buf[i] = le16_to_cpu(buf[i]);
#endif /* __BIG_ENDIAN */
4701 4702
}

4703 4704
/**
 *	ata_qc_new - Request an available ATA command, for queueing
R
Randy Dunlap 已提交
4705
 *	@ap: target port
4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732
 *
 *	LOCKING:
 *	None.
 */

static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
{
	struct ata_queued_cmd *qc = NULL;
	unsigned int i;

	/* no command while frozen */
	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
		return NULL;

	/* the last tag is reserved for internal command. */
	for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
		if (!test_and_set_bit(i, &ap->qc_allocated)) {
			qc = __ata_qc_from_tag(ap, i);
			break;
		}

	if (qc)
		qc->tag = i;

	return qc;
}

L
Linus Torvalds 已提交
4733 4734 4735 4736 4737
/**
 *	ata_qc_new_init - Request an available ATA command, and initialize it
 *	@dev: Device from whom we request an available command structure
 *
 *	LOCKING:
J
Jeff Garzik 已提交
4738
 *	None.
L
Linus Torvalds 已提交
4739 4740
 */

4741
struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
L
Linus Torvalds 已提交
4742
{
T
Tejun Heo 已提交
4743
	struct ata_port *ap = dev->link->ap;
L
Linus Torvalds 已提交
4744 4745
	struct ata_queued_cmd *qc;

4746
	qc = ata_qc_new(ap);
L
Linus Torvalds 已提交
4747 4748 4749 4750 4751
	if (qc) {
		qc->scsicmd = NULL;
		qc->ap = ap;
		qc->dev = dev;

J
Jeff Garzik 已提交
4752
		ata_qc_reinit(qc);
L
Linus Torvalds 已提交
4753 4754 4755 4756 4757
	}

	return qc;
}

4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772
/**
 *	ata_qc_free - free unused ata_queued_cmd
 *	@qc: Command to complete
 *
 *	Designed to free unused ata_queued_cmd object
 *	in case something prevents using it.
 *
 *	LOCKING:
 *	spin_lock_irqsave(host lock)
 */
void ata_qc_free(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	unsigned int tag;

4773
	WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
4774 4775 4776 4777 4778 4779 4780 4781 4782

	qc->flags = 0;
	tag = qc->tag;
	if (likely(ata_tag_valid(tag))) {
		qc->tag = ATA_TAG_POISON;
		clear_bit(tag, &ap->qc_allocated);
	}
}

4783
void __ata_qc_complete(struct ata_queued_cmd *qc)
L
Linus Torvalds 已提交
4784
{
4785
	struct ata_port *ap = qc->ap;
T
Tejun Heo 已提交
4786
	struct ata_link *link = qc->dev->link;
4787

4788 4789
	WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
	WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
L
Linus Torvalds 已提交
4790 4791 4792 4793

	if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
		ata_sg_clean(qc);

4794
	/* command should be marked inactive atomically with qc completion */
4795
	if (qc->tf.protocol == ATA_PROT_NCQ) {
T
Tejun Heo 已提交
4796
		link->sactive &= ~(1 << qc->tag);
4797 4798 4799
		if (!link->sactive)
			ap->nr_active_links--;
	} else {
T
Tejun Heo 已提交
4800
		link->active_tag = ATA_TAG_POISON;
4801 4802 4803 4804 4805 4806 4807
		ap->nr_active_links--;
	}

	/* clear exclusive status */
	if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL &&
		     ap->excl_link == link))
		ap->excl_link = NULL;
4808

4809 4810 4811 4812 4813
	/* atapi: mark qc as inactive to prevent the interrupt handler
	 * from completing the command twice later, before the error handler
	 * is called. (when rc != 0 and atapi request sense is needed)
	 */
	qc->flags &= ~ATA_QCFLAG_ACTIVE;
4814
	ap->qc_active &= ~(1 << qc->tag);
4815

L
Linus Torvalds 已提交
4816
	/* call completion callback */
4817
	qc->complete_fn(qc);
L
Linus Torvalds 已提交
4818 4819
}

4820 4821 4822 4823 4824
static void fill_result_tf(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;

	qc->result_tf.flags = qc->tf.flags;
4825
	ap->ops->qc_fill_rtf(qc);
4826 4827
}

4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843
static void ata_verify_xfer(struct ata_queued_cmd *qc)
{
	struct ata_device *dev = qc->dev;

	if (ata_tag_internal(qc->tag))
		return;

	if (ata_is_nodata(qc->tf.protocol))
		return;

	if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol))
		return;

	dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER;
}

4844 4845 4846 4847 4848 4849 4850 4851
/**
 *	ata_qc_complete - Complete an active ATA command
 *	@qc: Command to complete
 *
 *	Indicate to the mid and upper layers that an ATA
 *	command has completed, with either an ok or not-ok status.
 *
 *	LOCKING:
J
Jeff Garzik 已提交
4852
 *	spin_lock_irqsave(host lock)
4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871
 */
void ata_qc_complete(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;

	/* XXX: New EH and old EH use different mechanisms to
	 * synchronize EH with regular execution path.
	 *
	 * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED.
	 * Normal execution path is responsible for not accessing a
	 * failed qc.  libata core enforces the rule by returning NULL
	 * from ata_qc_from_tag() for failed qcs.
	 *
	 * Old EH depends on ata_qc_complete() nullifying completion
	 * requests if ATA_QCFLAG_EH_SCHEDULED is set.  Old EH does
	 * not synchronize with interrupt handler.  Only PIO task is
	 * taken care of.
	 */
	if (ap->ops->error_handler) {
4872 4873 4874
		struct ata_device *dev = qc->dev;
		struct ata_eh_info *ehi = &dev->link->eh_info;

4875
		WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
4876 4877 4878 4879 4880 4881 4882

		if (unlikely(qc->err_mask))
			qc->flags |= ATA_QCFLAG_FAILED;

		if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
			if (!ata_tag_internal(qc->tag)) {
				/* always fill result TF for failed qc */
4883
				fill_result_tf(qc);
4884 4885 4886 4887 4888 4889 4890
				ata_qc_schedule_eh(qc);
				return;
			}
		}

		/* read result TF if requested */
		if (qc->flags & ATA_QCFLAG_RESULT_TF)
4891
			fill_result_tf(qc);
4892

4893 4894 4895 4896 4897 4898 4899 4900 4901 4902 4903 4904 4905 4906 4907
		/* Some commands need post-processing after successful
		 * completion.
		 */
		switch (qc->tf.command) {
		case ATA_CMD_SET_FEATURES:
			if (qc->tf.feature != SETFEATURES_WC_ON &&
			    qc->tf.feature != SETFEATURES_WC_OFF)
				break;
			/* fall through */
		case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
		case ATA_CMD_SET_MULTI: /* multi_count changed */
			/* revalidate device */
			ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
			ata_port_schedule_eh(ap);
			break;
4908 4909 4910 4911

		case ATA_CMD_SLEEP:
			dev->flags |= ATA_DFLAG_SLEEPING;
			break;
4912 4913
		}

4914 4915 4916
		if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER))
			ata_verify_xfer(qc);

4917 4918 4919 4920 4921 4922 4923
		__ata_qc_complete(qc);
	} else {
		if (qc->flags & ATA_QCFLAG_EH_SCHEDULED)
			return;

		/* read result TF if failed or requested */
		if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF)
4924
			fill_result_tf(qc);
4925 4926 4927 4928 4929

		__ata_qc_complete(qc);
	}
}

4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940
/**
 *	ata_qc_complete_multiple - Complete multiple qcs successfully
 *	@ap: port in question
 *	@qc_active: new qc_active mask
 *
 *	Complete in-flight commands.  This functions is meant to be
 *	called from low-level driver's interrupt routine to complete
 *	requests normally.  ap->qc_active and @qc_active is compared
 *	and commands are completed accordingly.
 *
 *	LOCKING:
J
Jeff Garzik 已提交
4941
 *	spin_lock_irqsave(host lock)
4942 4943 4944 4945
 *
 *	RETURNS:
 *	Number of completed commands on success, -errno otherwise.
 */
4946
int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active)
4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974
{
	int nr_done = 0;
	u32 done_mask;
	int i;

	done_mask = ap->qc_active ^ qc_active;

	if (unlikely(done_mask & qc_active)) {
		ata_port_printk(ap, KERN_ERR, "illegal qc_active transition "
				"(%08x->%08x)\n", ap->qc_active, qc_active);
		return -EINVAL;
	}

	for (i = 0; i < ATA_MAX_QUEUE; i++) {
		struct ata_queued_cmd *qc;

		if (!(done_mask & (1 << i)))
			continue;

		if ((qc = ata_qc_from_tag(ap, i))) {
			ata_qc_complete(qc);
			nr_done++;
		}
	}

	return nr_done;
}

L
Linus Torvalds 已提交
4975 4976 4977 4978 4979 4980 4981 4982 4983 4984
/**
 *	ata_qc_issue - issue taskfile to device
 *	@qc: command to issue to device
 *
 *	Prepare an ATA command to submission to device.
 *	This includes mapping the data into a DMA-able
 *	area, filling in the S/G table, and finally
 *	writing the taskfile to hardware, starting the command.
 *
 *	LOCKING:
J
Jeff Garzik 已提交
4985
 *	spin_lock_irqsave(host lock)
L
Linus Torvalds 已提交
4986
 */
4987
void ata_qc_issue(struct ata_queued_cmd *qc)
L
Linus Torvalds 已提交
4988 4989
{
	struct ata_port *ap = qc->ap;
T
Tejun Heo 已提交
4990
	struct ata_link *link = qc->dev->link;
T
Tejun Heo 已提交
4991
	u8 prot = qc->tf.protocol;
L
Linus Torvalds 已提交
4992

4993 4994 4995 4996
	/* Make sure only one non-NCQ command is outstanding.  The
	 * check is skipped for old EH because it reuses active qc to
	 * request ATAPI sense.
	 */
4997
	WARN_ON_ONCE(ap->ops->error_handler && ata_tag_valid(link->active_tag));
4998

4999
	if (ata_is_ncq(prot)) {
5000
		WARN_ON_ONCE(link->sactive & (1 << qc->tag));
5001 5002 5003

		if (!link->sactive)
			ap->nr_active_links++;
T
Tejun Heo 已提交
5004
		link->sactive |= 1 << qc->tag;
5005
	} else {
5006
		WARN_ON_ONCE(link->sactive);
5007 5008

		ap->nr_active_links++;
T
Tejun Heo 已提交
5009
		link->active_tag = qc->tag;
5010 5011
	}

5012
	qc->flags |= ATA_QCFLAG_ACTIVE;
5013
	ap->qc_active |= 1 << qc->tag;
5014

5015 5016 5017
	/* We guarantee to LLDs that they will have at least one
	 * non-zero sg if the command is a data command.
	 */
T
Tejun Heo 已提交
5018
	BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes));
5019

T
Tejun Heo 已提交
5020
	if (ata_is_dma(prot) || (ata_is_pio(prot) &&
5021
				 (ap->flags & ATA_FLAG_PIO_DMA)))
T
Tejun Heo 已提交
5022 5023
		if (ata_sg_setup(qc))
			goto sg_err;
L
Linus Torvalds 已提交
5024

T
Tejun Heo 已提交
5025
	/* if device is sleeping, schedule reset and abort the link */
5026
	if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
T
Tejun Heo 已提交
5027
		link->eh_info.action |= ATA_EH_RESET;
5028 5029 5030 5031 5032
		ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
		ata_link_abort(link);
		return;
	}

L
Linus Torvalds 已提交
5033 5034
	ap->ops->qc_prep(qc);

5035 5036 5037 5038
	qc->err_mask |= ap->ops->qc_issue(qc);
	if (unlikely(qc->err_mask))
		goto err;
	return;
L
Linus Torvalds 已提交
5039

5040
sg_err:
5041 5042 5043
	qc->err_mask |= AC_ERR_SYSTEM;
err:
	ata_qc_complete(qc);
L
Linus Torvalds 已提交
5044 5045
}

5046 5047
/**
 *	sata_scr_valid - test whether SCRs are accessible
5048
 *	@link: ATA link to test SCR accessibility for
5049
 *
5050
 *	Test whether SCRs are accessible for @link.
5051 5052 5053 5054 5055 5056 5057
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	1 if SCRs are accessible, 0 otherwise.
 */
5058
int sata_scr_valid(struct ata_link *link)
5059
{
5060 5061
	struct ata_port *ap = link->ap;

5062
	return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read;
5063 5064 5065 5066
}

/**
 *	sata_scr_read - read SCR register of the specified port
5067
 *	@link: ATA link to read SCR for
5068 5069 5070
 *	@reg: SCR to read
 *	@val: Place to store read value
 *
5071
 *	Read SCR register @reg of @link into *@val.  This function is
5072 5073
 *	guaranteed to succeed if @link is ap->link, the cable type of
 *	the port is SATA and the port implements ->scr_read.
5074 5075
 *
 *	LOCKING:
5076
 *	None if @link is ap->link.  Kernel thread context otherwise.
5077 5078 5079 5080
 *
 *	RETURNS:
 *	0 on success, negative errno on failure.
 */
5081
int sata_scr_read(struct ata_link *link, int reg, u32 *val)
5082
{
5083 5084
	if (ata_is_host_link(link)) {
		if (sata_scr_valid(link))
T
Tejun Heo 已提交
5085
			return link->ap->ops->scr_read(link, reg, val);
5086 5087 5088 5089
		return -EOPNOTSUPP;
	}

	return sata_pmp_scr_read(link, reg, val);
5090 5091 5092 5093
}

/**
 *	sata_scr_write - write SCR register of the specified port
5094
 *	@link: ATA link to write SCR for
5095 5096 5097
 *	@reg: SCR to write
 *	@val: value to write
 *
5098
 *	Write @val to SCR register @reg of @link.  This function is
5099 5100
 *	guaranteed to succeed if @link is ap->link, the cable type of
 *	the port is SATA and the port implements ->scr_read.
5101 5102
 *
 *	LOCKING:
5103
 *	None if @link is ap->link.  Kernel thread context otherwise.
5104 5105 5106 5107
 *
 *	RETURNS:
 *	0 on success, negative errno on failure.
 */
5108
int sata_scr_write(struct ata_link *link, int reg, u32 val)
5109
{
5110 5111
	if (ata_is_host_link(link)) {
		if (sata_scr_valid(link))
T
Tejun Heo 已提交
5112
			return link->ap->ops->scr_write(link, reg, val);
5113 5114
		return -EOPNOTSUPP;
	}
5115

5116
	return sata_pmp_scr_write(link, reg, val);
5117 5118 5119 5120
}

/**
 *	sata_scr_write_flush - write SCR register of the specified port and flush
5121
 *	@link: ATA link to write SCR for
5122 5123 5124 5125 5126 5127 5128
 *	@reg: SCR to write
 *	@val: value to write
 *
 *	This function is identical to sata_scr_write() except that this
 *	function performs flush after writing to the register.
 *
 *	LOCKING:
5129
 *	None if @link is ap->link.  Kernel thread context otherwise.
5130 5131 5132 5133
 *
 *	RETURNS:
 *	0 on success, negative errno on failure.
 */
5134
int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
5135
{
5136 5137
	if (ata_is_host_link(link)) {
		int rc;
5138

5139
		if (sata_scr_valid(link)) {
T
Tejun Heo 已提交
5140
			rc = link->ap->ops->scr_write(link, reg, val);
5141
			if (rc == 0)
T
Tejun Heo 已提交
5142
				rc = link->ap->ops->scr_read(link, reg, &val);
5143 5144 5145
			return rc;
		}
		return -EOPNOTSUPP;
5146
	}
5147 5148

	return sata_pmp_scr_write(link, reg, val);
5149 5150 5151
}

/**
T
Tejun Heo 已提交
5152
 *	ata_phys_link_online - test whether the given link is online
5153
 *	@link: ATA link to test
5154
 *
5155 5156 5157
 *	Test whether @link is online.  Note that this function returns
 *	0 if online status of @link cannot be obtained, so
 *	ata_link_online(link) != !ata_link_offline(link).
5158 5159 5160 5161 5162
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
5163
 *	True if the port online status is available and online.
5164
 */
T
Tejun Heo 已提交
5165
bool ata_phys_link_online(struct ata_link *link)
5166 5167 5168
{
	u32 sstatus;

5169
	if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
5170
	    ata_sstatus_online(sstatus))
5171 5172
		return true;
	return false;
5173 5174 5175
}

/**
T
Tejun Heo 已提交
5176
 *	ata_phys_link_offline - test whether the given link is offline
5177
 *	@link: ATA link to test
5178
 *
5179 5180 5181
 *	Test whether @link is offline.  Note that this function
 *	returns 0 if offline status of @link cannot be obtained, so
 *	ata_link_online(link) != !ata_link_offline(link).
5182 5183 5184 5185 5186
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
5187
 *	True if the port offline status is available and offline.
5188
 */
T
Tejun Heo 已提交
5189
bool ata_phys_link_offline(struct ata_link *link)
5190 5191 5192
{
	u32 sstatus;

5193
	if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
5194
	    !ata_sstatus_online(sstatus))
5195 5196
		return true;
	return false;
5197
}
E
Edward Falk 已提交
5198

T
Tejun Heo 已提交
5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250
/**
 *	ata_link_online - test whether the given link is online
 *	@link: ATA link to test
 *
 *	Test whether @link is online.  This is identical to
 *	ata_phys_link_online() when there's no slave link.  When
 *	there's a slave link, this function should only be called on
 *	the master link and will return true if any of M/S links is
 *	online.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	True if the port online status is available and online.
 */
bool ata_link_online(struct ata_link *link)
{
	struct ata_link *slave = link->ap->slave_link;

	WARN_ON(link == slave);	/* shouldn't be called on slave link */

	return ata_phys_link_online(link) ||
		(slave && ata_phys_link_online(slave));
}

/**
 *	ata_link_offline - test whether the given link is offline
 *	@link: ATA link to test
 *
 *	Test whether @link is offline.  This is identical to
 *	ata_phys_link_offline() when there's no slave link.  When
 *	there's a slave link, this function should only be called on
 *	the master link and will return true if both M/S links are
 *	offline.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	True if the port offline status is available and offline.
 */
bool ata_link_offline(struct ata_link *link)
{
	struct ata_link *slave = link->ap->slave_link;

	WARN_ON(link == slave);	/* shouldn't be called on slave link */

	return ata_phys_link_offline(link) &&
		(!slave || ata_phys_link_offline(slave));
}

5251
#ifdef CONFIG_PM
J
Jeff Garzik 已提交
5252 5253 5254
static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
			       unsigned int action, unsigned int ehi_flags,
			       int wait)
5255 5256 5257 5258
{
	unsigned long flags;
	int i, rc;

J
Jeff Garzik 已提交
5259 5260
	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];
5261
		struct ata_link *link;
5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280

		/* Previous resume operation might still be in
		 * progress.  Wait for PM_PENDING to clear.
		 */
		if (ap->pflags & ATA_PFLAG_PM_PENDING) {
			ata_port_wait_eh(ap);
			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
		}

		/* request PM ops to EH */
		spin_lock_irqsave(ap->lock, flags);

		ap->pm_mesg = mesg;
		if (wait) {
			rc = 0;
			ap->pm_result = &rc;
		}

		ap->pflags |= ATA_PFLAG_PM_PENDING;
T
Tejun Heo 已提交
5281
		ata_for_each_link(link, ap, HOST_FIRST) {
5282 5283 5284
			link->eh_info.action |= action;
			link->eh_info.flags |= ehi_flags;
		}
5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302

		ata_port_schedule_eh(ap);

		spin_unlock_irqrestore(ap->lock, flags);

		/* wait and check result */
		if (wait) {
			ata_port_wait_eh(ap);
			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
			if (rc)
				return rc;
		}
	}

	return 0;
}

/**
J
Jeff Garzik 已提交
5303 5304
 *	ata_host_suspend - suspend host
 *	@host: host to suspend
5305 5306
 *	@mesg: PM message
 *
J
Jeff Garzik 已提交
5307
 *	Suspend @host.  Actual operation is performed by EH.  This
5308 5309 5310 5311 5312 5313 5314 5315 5316
 *	function requests EH to perform PM operations and waits for EH
 *	to finish.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
J
Jeff Garzik 已提交
5317
int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
5318
{
5319
	int rc;
5320

5321 5322 5323 5324 5325 5326
	/*
	 * disable link pm on all ports before requesting
	 * any pm activity
	 */
	ata_lpm_enable(host);

J
Jeff Garzik 已提交
5327
	rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
5328 5329
	if (rc == 0)
		host->dev->power.power_state = mesg;
5330 5331 5332 5333
	return rc;
}

/**
J
Jeff Garzik 已提交
5334 5335
 *	ata_host_resume - resume host
 *	@host: host to resume
5336
 *
J
Jeff Garzik 已提交
5337
 *	Resume @host.  Actual operation is performed by EH.  This
5338 5339 5340 5341 5342 5343
 *	function requests EH to perform PM operations and returns.
 *	Note that all resume operations are performed parallely.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 */
J
Jeff Garzik 已提交
5344
void ata_host_resume(struct ata_host *host)
5345
{
T
Tejun Heo 已提交
5346
	ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
J
Jeff Garzik 已提交
5347
			    ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
5348
	host->dev->power.power_state = PMSG_ON;
5349 5350 5351

	/* reenable link pm */
	ata_lpm_disable(host);
5352
}
5353
#endif
5354

5355 5356 5357 5358 5359 5360 5361 5362 5363 5364 5365 5366
/**
 *	ata_port_start - Set port up for dma.
 *	@ap: Port to initialize
 *
 *	Called just after data structures for each port are
 *	initialized.  Allocates space for PRD table.
 *
 *	May be used as the port_start() entry in ata_port_operations.
 *
 *	LOCKING:
 *	Inherited from caller.
 */
5367
int ata_port_start(struct ata_port *ap)
L
Linus Torvalds 已提交
5368
{
5369
	struct device *dev = ap->dev;
L
Linus Torvalds 已提交
5370

5371 5372
	ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma,
				      GFP_KERNEL);
L
Linus Torvalds 已提交
5373 5374 5375 5376 5377 5378
	if (!ap->prd)
		return -ENOMEM;

	return 0;
}

5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389
/**
 *	ata_dev_init - Initialize an ata_device structure
 *	@dev: Device structure to initialize
 *
 *	Initialize @dev in preparation for probing.
 *
 *	LOCKING:
 *	Inherited from caller.
 */
void ata_dev_init(struct ata_device *dev)
{
T
Tejun Heo 已提交
5390
	struct ata_link *link = ata_dev_phys_link(dev);
T
Tejun Heo 已提交
5391
	struct ata_port *ap = link->ap;
5392 5393
	unsigned long flags;

T
Tejun Heo 已提交
5394
	/* SATA spd limit is bound to the attached device, reset together */
T
Tejun Heo 已提交
5395 5396
	link->sata_spd_limit = link->hw_sata_spd_limit;
	link->sata_spd = 0;
5397

5398 5399
	/* High bits of dev->flags are used to record warm plug
	 * requests which occur asynchronously.  Synchronize using
J
Jeff Garzik 已提交
5400
	 * host lock.
5401
	 */
5402
	spin_lock_irqsave(ap->lock, flags);
5403
	dev->flags &= ~ATA_DFLAG_INIT_MASK;
5404
	dev->horkage = 0;
5405
	spin_unlock_irqrestore(ap->lock, flags);
5406

5407 5408
	memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
	       ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
5409 5410 5411 5412 5413
	dev->pio_mask = UINT_MAX;
	dev->mwdma_mask = UINT_MAX;
	dev->udma_mask = UINT_MAX;
}

5414 5415 5416 5417
/**
 *	ata_link_init - Initialize an ata_link structure
 *	@ap: ATA port link is attached to
 *	@link: Link structure to initialize
T
Tejun Heo 已提交
5418
 *	@pmp: Port multiplier port number
5419 5420 5421 5422 5423 5424
 *
 *	Initialize @link.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 */
5425
void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
5426 5427 5428 5429 5430 5431 5432
{
	int i;

	/* clear everything except for devices */
	memset(link, 0, offsetof(struct ata_link, device[0]));

	link->ap = ap;
T
Tejun Heo 已提交
5433
	link->pmp = pmp;
5434 5435 5436 5437 5438 5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459
	link->active_tag = ATA_TAG_POISON;
	link->hw_sata_spd_limit = UINT_MAX;

	/* can't use iterator, ap isn't initialized yet */
	for (i = 0; i < ATA_MAX_DEVICES; i++) {
		struct ata_device *dev = &link->device[i];

		dev->link = link;
		dev->devno = dev - link->device;
		ata_dev_init(dev);
	}
}

/**
 *	sata_link_init_spd - Initialize link->sata_spd_limit
 *	@link: Link to configure sata_spd_limit for
 *
 *	Initialize @link->[hw_]sata_spd_limit to the currently
 *	configured value.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
5460
int sata_link_init_spd(struct ata_link *link)
5461
{
5462
	u8 spd;
5463 5464
	int rc;

T
Tejun Heo 已提交
5465
	rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
5466 5467 5468
	if (rc)
		return rc;

T
Tejun Heo 已提交
5469
	spd = (link->saved_scontrol >> 4) & 0xf;
5470 5471 5472
	if (spd)
		link->hw_sata_spd_limit &= (1 << spd) - 1;

5473
	ata_force_link_limits(link);
5474

5475 5476 5477 5478 5479
	link->sata_spd_limit = link->hw_sata_spd_limit;

	return 0;
}

L
Linus Torvalds 已提交
5480
/**
5481 5482
 *	ata_port_alloc - allocate and initialize basic ATA port resources
 *	@host: ATA host this allocated port belongs to
L
Linus Torvalds 已提交
5483
 *
5484 5485 5486 5487
 *	Allocate and initialize basic ATA port resources.
 *
 *	RETURNS:
 *	Allocate ATA port on success, NULL on failure.
J
Jeff Garzik 已提交
5488
 *
L
Linus Torvalds 已提交
5489
 *	LOCKING:
5490
 *	Inherited from calling layer (may sleep).
L
Linus Torvalds 已提交
5491
 */
5492
struct ata_port *ata_port_alloc(struct ata_host *host)
L
Linus Torvalds 已提交
5493
{
5494
	struct ata_port *ap;
L
Linus Torvalds 已提交
5495

5496 5497 5498 5499 5500 5501
	DPRINTK("ENTER\n");

	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
	if (!ap)
		return NULL;

5502
	ap->pflags |= ATA_PFLAG_INITIALIZING;
J
Jeff Garzik 已提交
5503
	ap->lock = &host->lock;
5504
	ap->flags = ATA_FLAG_DISABLED;
5505
	ap->print_id = -1;
L
Linus Torvalds 已提交
5506
	ap->ctl = ATA_DEVCTL_OBS;
J
Jeff Garzik 已提交
5507
	ap->host = host;
5508
	ap->dev = host->dev;
L
Linus Torvalds 已提交
5509
	ap->last_ctl = 0xFF;
5510 5511 5512 5513 5514 5515

#if defined(ATA_VERBOSE_DEBUG)
	/* turn on all debugging levels */
	ap->msg_enable = 0x00FF;
#elif defined(ATA_DEBUG)
	ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR;
T
Tejun Heo 已提交
5516
#else
5517
	ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
5518
#endif
L
Linus Torvalds 已提交
5519

T
Tejun Heo 已提交
5520
#ifdef CONFIG_ATA_SFF
5521
	INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
5522 5523
#else
	INIT_DELAYED_WORK(&ap->port_task, NULL);
T
Tejun Heo 已提交
5524
#endif
5525 5526
	INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
	INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
5527
	INIT_LIST_HEAD(&ap->eh_done_q);
5528
	init_waitqueue_head(&ap->eh_wait_q);
5529
	init_completion(&ap->park_req_pending);
T
Tejun Heo 已提交
5530 5531 5532
	init_timer_deferrable(&ap->fastdrain_timer);
	ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn;
	ap->fastdrain_timer.data = (unsigned long)ap;
L
Linus Torvalds 已提交
5533

5534 5535
	ap->cbl = ATA_CBL_NONE;

T
Tejun Heo 已提交
5536
	ata_link_init(ap, &ap->link, 0);
L
Linus Torvalds 已提交
5537 5538 5539 5540 5541 5542 5543 5544

#ifdef ATA_IRQ_TRAP
	ap->stats.unhandled_irq = 1;
	ap->stats.idle_irq = 1;
#endif
	return ap;
}

5545 5546 5547 5548 5549
static void ata_host_release(struct device *gendev, void *res)
{
	struct ata_host *host = dev_get_drvdata(gendev);
	int i;

5550 5551 5552
	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];

5553 5554 5555 5556
		if (!ap)
			continue;

		if (ap->scsi_host)
5557 5558
			scsi_host_put(ap->scsi_host);

5559
		kfree(ap->pmp_link);
T
Tejun Heo 已提交
5560
		kfree(ap->slave_link);
5561
		kfree(ap);
5562 5563 5564
		host->ports[i] = NULL;
	}

5565
	dev_set_drvdata(gendev, NULL);
5566 5567
}

5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5597 5598 5599 5600 5601 5602 5603 5604 5605 5606 5607 5608 5609 5610 5611 5612 5613 5614 5615 5616 5617 5618 5619 5620 5621 5622 5623 5624 5625 5626 5627 5628 5629 5630 5631 5632
/**
 *	ata_host_alloc - allocate and init basic ATA host resources
 *	@dev: generic device this host is associated with
 *	@max_ports: maximum number of ATA ports associated with this host
 *
 *	Allocate and initialize basic ATA host resources.  LLD calls
 *	this function to allocate a host, initializes it fully and
 *	attaches it using ata_host_register().
 *
 *	@max_ports ports are allocated and host->n_ports is
 *	initialized to @max_ports.  The caller is allowed to decrease
 *	host->n_ports before calling ata_host_register().  The unused
 *	ports will be automatically freed on registration.
 *
 *	RETURNS:
 *	Allocate ATA host on success, NULL on failure.
 *
 *	LOCKING:
 *	Inherited from calling layer (may sleep).
 */
struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
{
	struct ata_host *host;
	size_t sz;
	int i;

	DPRINTK("ENTER\n");

	if (!devres_open_group(dev, NULL, GFP_KERNEL))
		return NULL;

	/* alloc a container for our list of ATA ports (buses) */
	sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *);
	/* alloc a container for our list of ATA ports (buses) */
	host = devres_alloc(ata_host_release, sz, GFP_KERNEL);
	if (!host)
		goto err_out;

	devres_add(dev, host);
	dev_set_drvdata(dev, host);

	spin_lock_init(&host->lock);
	host->dev = dev;
	host->n_ports = max_ports;

	/* allocate ports bound to this host */
	for (i = 0; i < max_ports; i++) {
		struct ata_port *ap;

		ap = ata_port_alloc(host);
		if (!ap)
			goto err_out;

		ap->port_no = i;
		host->ports[i] = ap;
	}

	devres_remove_group(dev, NULL);
	return host;

 err_out:
	devres_release_group(dev, NULL);
	return NULL;
}

5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5653 5654 5655 5656 5657 5658 5659 5660 5661 5662 5663 5664 5665 5666 5667 5668 5669 5670
/**
 *	ata_host_alloc_pinfo - alloc host and init with port_info array
 *	@dev: generic device this host is associated with
 *	@ppi: array of ATA port_info to initialize host with
 *	@n_ports: number of ATA ports attached to this host
 *
 *	Allocate ATA host and initialize with info from @ppi.  If NULL
 *	terminated, @ppi may contain fewer entries than @n_ports.  The
 *	last entry will be used for the remaining ports.
 *
 *	RETURNS:
 *	Allocate ATA host on success, NULL on failure.
 *
 *	LOCKING:
 *	Inherited from calling layer (may sleep).
 */
struct ata_host *ata_host_alloc_pinfo(struct device *dev,
				      const struct ata_port_info * const * ppi,
				      int n_ports)
{
	const struct ata_port_info *pi;
	struct ata_host *host;
	int i, j;

	host = ata_host_alloc(dev, n_ports);
	if (!host)
		return NULL;

	for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];

		if (ppi[j])
			pi = ppi[j++];

		ap->pio_mask = pi->pio_mask;
		ap->mwdma_mask = pi->mwdma_mask;
		ap->udma_mask = pi->udma_mask;
		ap->flags |= pi->flags;
5671
		ap->link.flags |= pi->link_flags;
5672 5673 5674 5675 5676 5677 5678 5679 5680
		ap->ops = pi->port_ops;

		if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
			host->ops = pi->port_ops;
	}

	return host;
}

T
Tejun Heo 已提交
5681 5682 5683 5684 5685 5686 5687 5688 5689 5690 5691 5692 5693 5694 5695 5696 5697 5698 5699 5700 5701 5702 5703 5704 5705 5706 5707 5708 5709 5710 5711 5712 5713 5714 5715 5716 5717 5718 5719 5720 5721 5722 5723 5724 5725 5726 5727 5728 5729 5730 5731 5732 5733 5734 5735 5736 5737 5738 5739 5740 5741 5742
/**
 *	ata_slave_link_init - initialize slave link
 *	@ap: port to initialize slave link for
 *
 *	Create and initialize slave link for @ap.  This enables slave
 *	link handling on the port.
 *
 *	In libata, a port contains links and a link contains devices.
 *	There is single host link but if a PMP is attached to it,
 *	there can be multiple fan-out links.  On SATA, there's usually
 *	a single device connected to a link but PATA and SATA
 *	controllers emulating TF based interface can have two - master
 *	and slave.
 *
 *	However, there are a few controllers which don't fit into this
 *	abstraction too well - SATA controllers which emulate TF
 *	interface with both master and slave devices but also have
 *	separate SCR register sets for each device.  These controllers
 *	need separate links for physical link handling
 *	(e.g. onlineness, link speed) but should be treated like a
 *	traditional M/S controller for everything else (e.g. command
 *	issue, softreset).
 *
 *	slave_link is libata's way of handling this class of
 *	controllers without impacting core layer too much.  For
 *	anything other than physical link handling, the default host
 *	link is used for both master and slave.  For physical link
 *	handling, separate @ap->slave_link is used.  All dirty details
 *	are implemented inside libata core layer.  From LLD's POV, the
 *	only difference is that prereset, hardreset and postreset are
 *	called once more for the slave link, so the reset sequence
 *	looks like the following.
 *
 *	prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
 *	softreset(M) -> postreset(M) -> postreset(S)
 *
 *	Note that softreset is called only for the master.  Softreset
 *	resets both M/S by definition, so SRST on master should handle
 *	both (the standard method will work just fine).
 *
 *	LOCKING:
 *	Should be called before host is registered.
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
int ata_slave_link_init(struct ata_port *ap)
{
	struct ata_link *link;

	WARN_ON(ap->slave_link);
	WARN_ON(ap->flags & ATA_FLAG_PMP);

	link = kzalloc(sizeof(*link), GFP_KERNEL);
	if (!link)
		return -ENOMEM;

	ata_link_init(ap, link, 1);
	ap->slave_link = link;
	return 0;
}

5743 5744 5745 5746 5747 5748 5749 5750 5751 5752 5753 5754 5755 5756 5757 5758 5759 5760
static void ata_host_stop(struct device *gendev, void *res)
{
	struct ata_host *host = dev_get_drvdata(gendev);
	int i;

	WARN_ON(!(host->flags & ATA_HOST_STARTED));

	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];

		if (ap->ops->port_stop)
			ap->ops->port_stop(ap);
	}

	if (host->ops->host_stop)
		host->ops->host_stop(host);
}

5761 5762 5763 5764 5765 5766 5767 5768 5769 5770 5771 5772 5773 5774 5775 5776 5777 5778 5779 5780 5781 5782
/**
 *	ata_finalize_port_ops - finalize ata_port_operations
 *	@ops: ata_port_operations to finalize
 *
 *	An ata_port_operations can inherit from another ops and that
 *	ops can again inherit from another.  This can go on as many
 *	times as necessary as long as there is no loop in the
 *	inheritance chain.
 *
 *	Ops tables are finalized when the host is started.  NULL or
 *	unspecified entries are inherited from the closet ancestor
 *	which has the method and the entry is populated with it.
 *	After finalization, the ops table directly points to all the
 *	methods and ->inherits is no longer necessary and cleared.
 *
 *	Using ATA_OP_NULL, inheriting ops can force a method to NULL.
 *
 *	LOCKING:
 *	None.
 */
static void ata_finalize_port_ops(struct ata_port_operations *ops)
{
5783
	static DEFINE_SPINLOCK(lock);
5784 5785 5786 5787 5788 5789 5790 5791 5792 5793 5794 5795 5796 5797 5798 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810
	const struct ata_port_operations *cur;
	void **begin = (void **)ops;
	void **end = (void **)&ops->inherits;
	void **pp;

	if (!ops || !ops->inherits)
		return;

	spin_lock(&lock);

	for (cur = ops->inherits; cur; cur = cur->inherits) {
		void **inherit = (void **)cur;

		for (pp = begin; pp < end; pp++, inherit++)
			if (!*pp)
				*pp = *inherit;
	}

	for (pp = begin; pp < end; pp++)
		if (IS_ERR(*pp))
			*pp = NULL;

	ops->inherits = NULL;

	spin_unlock(&lock);
}

5811 5812 5813 5814 5815 5816 5817
/**
 *	ata_host_start - start and freeze ports of an ATA host
 *	@host: ATA host to start ports for
 *
 *	Start and then freeze ports of @host.  Started status is
 *	recorded in host->flags, so this function can be called
 *	multiple times.  Ports are guaranteed to get started only
5818 5819
 *	once.  If host->ops isn't initialized yet, its set to the
 *	first non-dummy port ops.
5820 5821 5822 5823 5824 5825 5826 5827 5828
 *
 *	LOCKING:
 *	Inherited from calling layer (may sleep).
 *
 *	RETURNS:
 *	0 if all ports are started successfully, -errno otherwise.
 */
int ata_host_start(struct ata_host *host)
{
5829 5830
	int have_stop = 0;
	void *start_dr = NULL;
5831 5832 5833 5834 5835
	int i, rc;

	if (host->flags & ATA_HOST_STARTED)
		return 0;

5836 5837
	ata_finalize_port_ops(host->ops);

5838 5839 5840
	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];

5841 5842
		ata_finalize_port_ops(ap->ops);

5843 5844 5845
		if (!host->ops && !ata_port_is_dummy(ap))
			host->ops = ap->ops;

5846 5847 5848 5849 5850 5851 5852 5853 5854 5855 5856 5857 5858 5859 5860 5861
		if (ap->ops->port_stop)
			have_stop = 1;
	}

	if (host->ops->host_stop)
		have_stop = 1;

	if (have_stop) {
		start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL);
		if (!start_dr)
			return -ENOMEM;
	}

	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];

5862 5863 5864
		if (ap->ops->port_start) {
			rc = ap->ops->port_start(ap);
			if (rc) {
5865
				if (rc != -ENODEV)
A
Andrew Morton 已提交
5866 5867 5868
					dev_printk(KERN_ERR, host->dev,
						"failed to start port %d "
						"(errno=%d)\n", i, rc);
5869 5870 5871 5872 5873 5874
				goto err_out;
			}
		}
		ata_eh_freeze_port(ap);
	}

5875 5876
	if (start_dr)
		devres_add(host->dev, start_dr);
5877 5878 5879 5880 5881 5882 5883 5884 5885 5886
	host->flags |= ATA_HOST_STARTED;
	return 0;

 err_out:
	while (--i >= 0) {
		struct ata_port *ap = host->ports[i];

		if (ap->ops->port_stop)
			ap->ops->port_stop(ap);
	}
5887
	devres_free(start_dr);
5888 5889 5890
	return rc;
}

5891
/**
J
Jeff Garzik 已提交
5892 5893 5894 5895 5896
 *	ata_sas_host_init - Initialize a host struct
 *	@host:	host to initialize
 *	@dev:	device host is attached to
 *	@flags:	host flags
 *	@ops:	port_ops
5897 5898 5899 5900 5901
 *
 *	LOCKING:
 *	PCI/etc. bus probe sem.
 *
 */
5902
/* KILLME - the only user left is ipr */
J
Jeff Garzik 已提交
5903
void ata_host_init(struct ata_host *host, struct device *dev,
5904
		   unsigned long flags, struct ata_port_operations *ops)
5905
{
J
Jeff Garzik 已提交
5906 5907 5908 5909
	spin_lock_init(&host->lock);
	host->dev = dev;
	host->flags = flags;
	host->ops = ops;
5910 5911
}

5912 5913 5914 5915 5916

static void async_port_probe(void *data, async_cookie_t cookie)
{
	int rc;
	struct ata_port *ap = data;
5917 5918 5919 5920 5921

	/*
	 * If we're not allowed to scan this host in parallel,
	 * we need to wait until all previous scans have completed
	 * before going further.
5922 5923
	 * Jeff Garzik says this is only within a controller, so we
	 * don't need to wait for port 0, only for later ports.
5924
	 */
5925
	if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
5926 5927
		async_synchronize_cookie(cookie);

5928 5929 5930 5931 5932 5933 5934 5935 5936 5937 5938 5939 5940 5941 5942 5943 5944 5945 5946 5947 5948 5949 5950 5951 5952 5953 5954 5955 5956 5957 5958 5959 5960 5961 5962 5963
	/* probe */
	if (ap->ops->error_handler) {
		struct ata_eh_info *ehi = &ap->link.eh_info;
		unsigned long flags;

		ata_port_probe(ap);

		/* kick EH for boot probing */
		spin_lock_irqsave(ap->lock, flags);

		ehi->probe_mask |= ATA_ALL_DEVICES;
		ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
		ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;

		ap->pflags &= ~ATA_PFLAG_INITIALIZING;
		ap->pflags |= ATA_PFLAG_LOADING;
		ata_port_schedule_eh(ap);

		spin_unlock_irqrestore(ap->lock, flags);

		/* wait for EH to finish */
		ata_port_wait_eh(ap);
	} else {
		DPRINTK("ata%u: bus probe begin\n", ap->print_id);
		rc = ata_bus_probe(ap);
		DPRINTK("ata%u: bus probe end\n", ap->print_id);

		if (rc) {
			/* FIXME: do something useful here?
			 * Current libata behavior will
			 * tear down everything when
			 * the module is removed
			 * or the h/w is unplugged.
			 */
		}
	}
5964 5965 5966 5967 5968 5969

	/* in order to keep device order, we need to synchronize at this point */
	async_synchronize_cookie(cookie);

	ata_scsi_scan_host(ap, 1);

5970
}
5971 5972 5973 5974 5975 5976 5977 5978 5979 5980 5981 5982 5983 5984 5985 5986 5987 5988 5989 5990 5991 5992 5993 5994 5995 5996 5997 5998 5999 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013
/**
 *	ata_host_register - register initialized ATA host
 *	@host: ATA host to register
 *	@sht: template for SCSI host
 *
 *	Register initialized ATA host.  @host is allocated using
 *	ata_host_alloc() and fully initialized by LLD.  This function
 *	starts ports, registers @host with ATA and SCSI layers and
 *	probe registered devices.
 *
 *	LOCKING:
 *	Inherited from calling layer (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno otherwise.
 */
int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
{
	int i, rc;

	/* host must have been started */
	if (!(host->flags & ATA_HOST_STARTED)) {
		dev_printk(KERN_ERR, host->dev,
			   "BUG: trying to register unstarted host\n");
		WARN_ON(1);
		return -EINVAL;
	}

	/* Blow away unused ports.  This happens when LLD can't
	 * determine the exact number of ports to allocate at
	 * allocation time.
	 */
	for (i = host->n_ports; host->ports[i]; i++)
		kfree(host->ports[i]);

	/* give ports names and add SCSI hosts */
	for (i = 0; i < host->n_ports; i++)
		host->ports[i]->print_id = ata_print_id++;

	rc = ata_scsi_add_hosts(host, sht);
	if (rc)
		return rc;

6014 6015 6016
	/* associate with ACPI nodes */
	ata_acpi_associate(host);

6017 6018 6019 6020 6021 6022 6023 6024 6025 6026
	/* set cable, sata_spd_limit and report */
	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];
		unsigned long xfer_mask;

		/* set SATA cable type if still unset */
		if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA))
			ap->cbl = ATA_CBL_SATA;

		/* init sata_spd_limit to the current value */
6027
		sata_link_init_spd(&ap->link);
T
Tejun Heo 已提交
6028 6029
		if (ap->slave_link)
			sata_link_init_spd(ap->slave_link);
6030

6031
		/* print per-port info to dmesg */
6032 6033 6034
		xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
					      ap->udma_mask);

6035
		if (!ata_port_is_dummy(ap)) {
6036 6037
			ata_port_printk(ap, KERN_INFO,
					"%cATA max %s %s\n",
6038
					(ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
6039
					ata_mode_string(xfer_mask),
6040
					ap->link.eh_info.desc);
6041 6042
			ata_ehi_clear_desc(&ap->link.eh_info);
		} else
6043 6044 6045 6046 6047 6048 6049
			ata_port_printk(ap, KERN_INFO, "DUMMY\n");
	}

	/* perform each probe synchronously */
	DPRINTK("probe begin\n");
	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];
6050
		async_schedule(async_port_probe, ap);
6051
	}
6052
	DPRINTK("probe end\n");
6053 6054 6055 6056

	return 0;
}

6057 6058 6059 6060 6061 6062 6063 6064 6065 6066 6067 6068 6069
/**
 *	ata_host_activate - start host, request IRQ and register it
 *	@host: target ATA host
 *	@irq: IRQ to request
 *	@irq_handler: irq_handler used when requesting IRQ
 *	@irq_flags: irq_flags used when requesting IRQ
 *	@sht: scsi_host_template to use when registering the host
 *
 *	After allocating an ATA host and initializing it, most libata
 *	LLDs perform three steps to activate the host - start host,
 *	request IRQ and register it.  This helper takes necessasry
 *	arguments and performs the three steps in one go.
 *
6070 6071 6072 6073
 *	An invalid IRQ skips the IRQ registration and expects the host to
 *	have set polling mode on the port. In this case, @irq_handler
 *	should be NULL.
 *
6074 6075 6076 6077 6078 6079 6080 6081 6082 6083
 *	LOCKING:
 *	Inherited from calling layer (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno otherwise.
 */
int ata_host_activate(struct ata_host *host, int irq,
		      irq_handler_t irq_handler, unsigned long irq_flags,
		      struct scsi_host_template *sht)
{
6084
	int i, rc;
6085 6086 6087 6088 6089

	rc = ata_host_start(host);
	if (rc)
		return rc;

6090 6091 6092 6093 6094 6095
	/* Special case for polling mode */
	if (!irq) {
		WARN_ON(irq_handler);
		return ata_host_register(host, sht);
	}

6096 6097 6098 6099 6100
	rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
			      dev_driver_string(host->dev), host);
	if (rc)
		return rc;

6101 6102
	for (i = 0; i < host->n_ports; i++)
		ata_port_desc(host->ports[i], "irq %d", irq);
T
Tejun Heo 已提交
6103

6104 6105 6106 6107 6108 6109 6110 6111
	rc = ata_host_register(host, sht);
	/* if failed, just free the IRQ and leave ports alone */
	if (rc)
		devm_free_irq(host->dev, irq, host);

	return rc;
}

6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122
/**
 *	ata_port_detach - Detach ATA port in prepration of device removal
 *	@ap: ATA port to be detached
 *
 *	Detach all ATA devices and the associated SCSI devices of @ap;
 *	then, remove the associated SCSI host.  @ap is guaranteed to
 *	be quiescent on return from this function.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 */
6123
static void ata_port_detach(struct ata_port *ap)
6124 6125 6126 6127
{
	unsigned long flags;

	if (!ap->ops->error_handler)
6128
		goto skip_eh;
6129 6130

	/* tell EH we're leaving & flush EH */
6131
	spin_lock_irqsave(ap->lock, flags);
6132
	ap->pflags |= ATA_PFLAG_UNLOADING;
T
Tejun Heo 已提交
6133
	ata_port_schedule_eh(ap);
6134
	spin_unlock_irqrestore(ap->lock, flags);
6135

T
Tejun Heo 已提交
6136
	/* wait till EH commits suicide */
6137 6138
	ata_port_wait_eh(ap);

T
Tejun Heo 已提交
6139 6140
	/* it better be dead now */
	WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
6141

6142
	cancel_rearming_delayed_work(&ap->hotplug_task);
6143

6144
 skip_eh:
6145
	/* remove the associated SCSI host */
J
Jeff Garzik 已提交
6146
	scsi_remove_host(ap->scsi_host);
6147 6148
}

T
Tejun Heo 已提交
6149 6150 6151 6152 6153 6154 6155 6156 6157 6158 6159 6160 6161 6162 6163
/**
 *	ata_host_detach - Detach all ports of an ATA host
 *	@host: Host to detach
 *
 *	Detach all ports of @host.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 */
void ata_host_detach(struct ata_host *host)
{
	int i;

	for (i = 0; i < host->n_ports; i++)
		ata_port_detach(host->ports[i]);
6164 6165 6166

	/* the host is dead now, dissociate ACPI */
	ata_acpi_dissociate(host);
T
Tejun Heo 已提交
6167 6168
}

6169 6170
#ifdef CONFIG_PCI

L
Linus Torvalds 已提交
6171 6172 6173 6174
/**
 *	ata_pci_remove_one - PCI layer callback for device removal
 *	@pdev: PCI device that was removed
 *
T
Tejun Heo 已提交
6175 6176 6177
 *	PCI layer indicates to libata via this hook that hot-unplug or
 *	module unload event has occurred.  Detach all ports.  Resource
 *	release is handled via devres.
L
Linus Torvalds 已提交
6178 6179 6180 6181
 *
 *	LOCKING:
 *	Inherited from PCI layer (may sleep).
 */
6182
void ata_pci_remove_one(struct pci_dev *pdev)
L
Linus Torvalds 已提交
6183
{
6184
	struct device *dev = &pdev->dev;
J
Jeff Garzik 已提交
6185
	struct ata_host *host = dev_get_drvdata(dev);
L
Linus Torvalds 已提交
6186

T
Tejun Heo 已提交
6187
	ata_host_detach(host);
L
Linus Torvalds 已提交
6188 6189 6190
}

/* move to PCI subsystem */
J
Jeff Garzik 已提交
6191
int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
L
Linus Torvalds 已提交
6192 6193 6194 6195 6196 6197 6198 6199 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 6221 6222
{
	unsigned long tmp = 0;

	switch (bits->width) {
	case 1: {
		u8 tmp8 = 0;
		pci_read_config_byte(pdev, bits->reg, &tmp8);
		tmp = tmp8;
		break;
	}
	case 2: {
		u16 tmp16 = 0;
		pci_read_config_word(pdev, bits->reg, &tmp16);
		tmp = tmp16;
		break;
	}
	case 4: {
		u32 tmp32 = 0;
		pci_read_config_dword(pdev, bits->reg, &tmp32);
		tmp = tmp32;
		break;
	}

	default:
		return -EINVAL;
	}

	tmp &= bits->mask;

	return (tmp == bits->val) ? 1 : 0;
}
J
Jens Axboe 已提交
6223

6224
#ifdef CONFIG_PM
6225
void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
J
Jens Axboe 已提交
6226 6227
{
	pci_save_state(pdev);
6228
	pci_disable_device(pdev);
6229

6230
	if (mesg.event & PM_EVENT_SLEEP)
6231
		pci_set_power_state(pdev, PCI_D3hot);
J
Jens Axboe 已提交
6232 6233
}

6234
int ata_pci_device_do_resume(struct pci_dev *pdev)
J
Jens Axboe 已提交
6235
{
6236 6237
	int rc;

J
Jens Axboe 已提交
6238 6239
	pci_set_power_state(pdev, PCI_D0);
	pci_restore_state(pdev);
6240

T
Tejun Heo 已提交
6241
	rc = pcim_enable_device(pdev);
6242 6243 6244 6245 6246 6247
	if (rc) {
		dev_printk(KERN_ERR, &pdev->dev,
			   "failed to enable device after resume (%d)\n", rc);
		return rc;
	}

J
Jens Axboe 已提交
6248
	pci_set_master(pdev);
6249
	return 0;
6250 6251
}

6252
int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
6253
{
J
Jeff Garzik 已提交
6254
	struct ata_host *host = dev_get_drvdata(&pdev->dev);
6255 6256
	int rc = 0;

J
Jeff Garzik 已提交
6257
	rc = ata_host_suspend(host, mesg);
6258 6259 6260
	if (rc)
		return rc;

6261
	ata_pci_device_do_suspend(pdev, mesg);
6262 6263 6264 6265 6266 6267

	return 0;
}

int ata_pci_device_resume(struct pci_dev *pdev)
{
J
Jeff Garzik 已提交
6268
	struct ata_host *host = dev_get_drvdata(&pdev->dev);
6269
	int rc;
6270

6271 6272 6273 6274
	rc = ata_pci_device_do_resume(pdev);
	if (rc == 0)
		ata_host_resume(host);
	return rc;
J
Jens Axboe 已提交
6275
}
6276 6277
#endif /* CONFIG_PM */

L
Linus Torvalds 已提交
6278 6279
#endif /* CONFIG_PCI */

6280 6281 6282 6283 6284 6285 6286 6287 6288 6289 6290 6291 6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6321 6322 6323 6324 6325 6326 6327 6328 6329 6330 6331 6332 6333
static int __init ata_parse_force_one(char **cur,
				      struct ata_force_ent *force_ent,
				      const char **reason)
{
	/* FIXME: Currently, there's no way to tag init const data and
	 * using __initdata causes build failure on some versions of
	 * gcc.  Once __initdataconst is implemented, add const to the
	 * following structure.
	 */
	static struct ata_force_param force_tbl[] __initdata = {
		{ "40c",	.cbl		= ATA_CBL_PATA40 },
		{ "80c",	.cbl		= ATA_CBL_PATA80 },
		{ "short40c",	.cbl		= ATA_CBL_PATA40_SHORT },
		{ "unk",	.cbl		= ATA_CBL_PATA_UNK },
		{ "ign",	.cbl		= ATA_CBL_PATA_IGN },
		{ "sata",	.cbl		= ATA_CBL_SATA },
		{ "1.5Gbps",	.spd_limit	= 1 },
		{ "3.0Gbps",	.spd_limit	= 2 },
		{ "noncq",	.horkage_on	= ATA_HORKAGE_NONCQ },
		{ "ncq",	.horkage_off	= ATA_HORKAGE_NONCQ },
		{ "pio0",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 0) },
		{ "pio1",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 1) },
		{ "pio2",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 2) },
		{ "pio3",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 3) },
		{ "pio4",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 4) },
		{ "pio5",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 5) },
		{ "pio6",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 6) },
		{ "mwdma0",	.xfer_mask	= 1 << (ATA_SHIFT_MWDMA + 0) },
		{ "mwdma1",	.xfer_mask	= 1 << (ATA_SHIFT_MWDMA + 1) },
		{ "mwdma2",	.xfer_mask	= 1 << (ATA_SHIFT_MWDMA + 2) },
		{ "mwdma3",	.xfer_mask	= 1 << (ATA_SHIFT_MWDMA + 3) },
		{ "mwdma4",	.xfer_mask	= 1 << (ATA_SHIFT_MWDMA + 4) },
		{ "udma0",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 0) },
		{ "udma16",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 0) },
		{ "udma/16",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 0) },
		{ "udma1",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 1) },
		{ "udma25",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 1) },
		{ "udma/25",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 1) },
		{ "udma2",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 2) },
		{ "udma33",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 2) },
		{ "udma/33",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 2) },
		{ "udma3",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 3) },
		{ "udma44",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 3) },
		{ "udma/44",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 3) },
		{ "udma4",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 4) },
		{ "udma66",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 4) },
		{ "udma/66",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 4) },
		{ "udma5",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 5) },
		{ "udma100",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 5) },
		{ "udma/100",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 5) },
		{ "udma6",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
		{ "udma133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
		{ "udma/133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
		{ "udma7",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 7) },
6334 6335 6336
		{ "nohrst",	.lflags		= ATA_LFLAG_NO_HRST },
		{ "nosrst",	.lflags		= ATA_LFLAG_NO_SRST },
		{ "norst",	.lflags		= ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6353 6354 6355 6356 6357 6358 6359 6360 6361 6362 6363 6364 6365 6366 6367 6368 6369 6370 6371 6372 6373 6374 6375 6376 6377 6378 6379 6380 6381 6382 6383 6384 6385 6386 6387 6388 6389 6390 6391 6392 6393 6394 6395 6396 6397 6398 6399 6400 6401 6402 6403 6404 6405 6406 6407 6408 6409 6410 6411 6412 6413 6414 6415 6416 6417 6418 6419 6420 6421 6422 6423 6424 6425 6426 6427 6428 6429 6430 6431 6432 6433 6434 6435 6436 6437 6438 6439 6440 6441 6442 6443 6444 6445 6446 6447 6448 6449 6450 6451 6452 6453 6454 6455 6456
	};
	char *start = *cur, *p = *cur;
	char *id, *val, *endp;
	const struct ata_force_param *match_fp = NULL;
	int nr_matches = 0, i;

	/* find where this param ends and update *cur */
	while (*p != '\0' && *p != ',')
		p++;

	if (*p == '\0')
		*cur = p;
	else
		*cur = p + 1;

	*p = '\0';

	/* parse */
	p = strchr(start, ':');
	if (!p) {
		val = strstrip(start);
		goto parse_val;
	}
	*p = '\0';

	id = strstrip(start);
	val = strstrip(p + 1);

	/* parse id */
	p = strchr(id, '.');
	if (p) {
		*p++ = '\0';
		force_ent->device = simple_strtoul(p, &endp, 10);
		if (p == endp || *endp != '\0') {
			*reason = "invalid device";
			return -EINVAL;
		}
	}

	force_ent->port = simple_strtoul(id, &endp, 10);
	if (p == endp || *endp != '\0') {
		*reason = "invalid port/link";
		return -EINVAL;
	}

 parse_val:
	/* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */
	for (i = 0; i < ARRAY_SIZE(force_tbl); i++) {
		const struct ata_force_param *fp = &force_tbl[i];

		if (strncasecmp(val, fp->name, strlen(val)))
			continue;

		nr_matches++;
		match_fp = fp;

		if (strcasecmp(val, fp->name) == 0) {
			nr_matches = 1;
			break;
		}
	}

	if (!nr_matches) {
		*reason = "unknown value";
		return -EINVAL;
	}
	if (nr_matches > 1) {
		*reason = "ambigious value";
		return -EINVAL;
	}

	force_ent->param = *match_fp;

	return 0;
}

static void __init ata_parse_force_param(void)
{
	int idx = 0, size = 1;
	int last_port = -1, last_device = -1;
	char *p, *cur, *next;

	/* calculate maximum number of params and allocate force_tbl */
	for (p = ata_force_param_buf; *p; p++)
		if (*p == ',')
			size++;

	ata_force_tbl = kzalloc(sizeof(ata_force_tbl[0]) * size, GFP_KERNEL);
	if (!ata_force_tbl) {
		printk(KERN_WARNING "ata: failed to extend force table, "
		       "libata.force ignored\n");
		return;
	}

	/* parse and populate the table */
	for (cur = ata_force_param_buf; *cur != '\0'; cur = next) {
		const char *reason = "";
		struct ata_force_ent te = { .port = -1, .device = -1 };

		next = cur;
		if (ata_parse_force_one(&next, &te, &reason)) {
			printk(KERN_WARNING "ata: failed to parse force "
			       "parameter \"%s\" (%s)\n",
			       cur, reason);
			continue;
		}

		if (te.port == -1) {
			te.port = last_port;
			te.device = last_device;
		}

		ata_force_tbl[idx++] = te;

		last_port = te.port;
		last_device = te.device;
	}

	ata_force_tbl_size = idx;
}
L
Linus Torvalds 已提交
6457 6458 6459

static int __init ata_init(void)
{
6460 6461
	ata_parse_force_param();

L
Linus Torvalds 已提交
6462 6463
	ata_wq = create_workqueue("ata");
	if (!ata_wq)
6464
		goto free_force_tbl;
L
Linus Torvalds 已提交
6465

6466
	ata_aux_wq = create_singlethread_workqueue("ata_aux");
6467 6468
	if (!ata_aux_wq)
		goto free_wq;
6469

L
Linus Torvalds 已提交
6470 6471
	printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
	return 0;
6472 6473 6474 6475 6476 6477

free_wq:
	destroy_workqueue(ata_wq);
free_force_tbl:
	kfree(ata_force_tbl);
	return -ENOMEM;
L
Linus Torvalds 已提交
6478 6479 6480 6481
}

static void __exit ata_exit(void)
{
6482
	kfree(ata_force_tbl);
L
Linus Torvalds 已提交
6483
	destroy_workqueue(ata_wq);
6484
	destroy_workqueue(ata_aux_wq);
L
Linus Torvalds 已提交
6485 6486
}

6487
subsys_initcall(ata_init);
L
Linus Torvalds 已提交
6488 6489
module_exit(ata_exit);

6490
static unsigned long ratelimit_time;
I
Ingo Molnar 已提交
6491
static DEFINE_SPINLOCK(ata_ratelimit_lock);
6492 6493 6494 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6506 6507 6508 6509 6510

int ata_ratelimit(void)
{
	int rc;
	unsigned long flags;

	spin_lock_irqsave(&ata_ratelimit_lock, flags);

	if (time_after(jiffies, ratelimit_time)) {
		rc = 1;
		ratelimit_time = jiffies + (HZ/5);
	} else
		rc = 0;

	spin_unlock_irqrestore(&ata_ratelimit_lock, flags);

	return rc;
}

6511 6512 6513 6514 6515
/**
 *	ata_wait_register - wait until register value changes
 *	@reg: IO-mapped register
 *	@mask: Mask to apply to read register value
 *	@val: Wait condition
6516 6517
 *	@interval: polling interval in milliseconds
 *	@timeout: timeout in milliseconds
6518 6519 6520 6521 6522 6523 6524 6525 6526 6527 6528 6529 6530 6531 6532 6533 6534
 *
 *	Waiting for some bits of register to change is a common
 *	operation for ATA controllers.  This function reads 32bit LE
 *	IO-mapped register @reg and tests for the following condition.
 *
 *	(*@reg & mask) != val
 *
 *	If the condition is met, it returns; otherwise, the process is
 *	repeated after @interval_msec until timeout.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
 *
 *	RETURNS:
 *	The final register value.
 */
u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
6535
		      unsigned long interval, unsigned long timeout)
6536
{
6537
	unsigned long deadline;
6538 6539 6540 6541 6542 6543 6544 6545
	u32 tmp;

	tmp = ioread32(reg);

	/* Calculate timeout _after_ the first read to make sure
	 * preceding writes reach the controller before starting to
	 * eat away the timeout.
	 */
6546
	deadline = ata_deadline(jiffies, timeout);
6547

6548 6549
	while ((tmp & mask) == val && time_before(jiffies, deadline)) {
		msleep(interval);
6550 6551 6552 6553 6554 6555
		tmp = ioread32(reg);
	}

	return tmp;
}

T
Tejun Heo 已提交
6556 6557 6558
/*
 * Dummy port_ops
 */
T
Tejun Heo 已提交
6559
static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
T
Tejun Heo 已提交
6560
{
T
Tejun Heo 已提交
6561
	return AC_ERR_SYSTEM;
T
Tejun Heo 已提交
6562 6563
}

T
Tejun Heo 已提交
6564
static void ata_dummy_error_handler(struct ata_port *ap)
T
Tejun Heo 已提交
6565
{
T
Tejun Heo 已提交
6566
	/* truly dummy */
T
Tejun Heo 已提交
6567 6568
}

6569
struct ata_port_operations ata_dummy_port_ops = {
T
Tejun Heo 已提交
6570 6571
	.qc_prep		= ata_noop_qc_prep,
	.qc_issue		= ata_dummy_qc_issue,
T
Tejun Heo 已提交
6572
	.error_handler		= ata_dummy_error_handler,
T
Tejun Heo 已提交
6573 6574
};

6575 6576 6577 6578
const struct ata_port_info ata_dummy_port_info = {
	.port_ops		= &ata_dummy_port_ops,
};

L
Linus Torvalds 已提交
6579 6580 6581 6582 6583 6584
/*
 * libata is essentially a library of internal helper functions for
 * low-level ATA host controller drivers.  As such, the API/ABI is
 * likely to change as new drivers are added and updated.
 * Do not depend on ABI/API stability.
 */
6585 6586 6587
EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
6588 6589
EXPORT_SYMBOL_GPL(ata_base_port_ops);
EXPORT_SYMBOL_GPL(sata_port_ops);
T
Tejun Heo 已提交
6590
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
6591
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
T
Tejun Heo 已提交
6592 6593
EXPORT_SYMBOL_GPL(ata_link_next);
EXPORT_SYMBOL_GPL(ata_dev_next);
L
Linus Torvalds 已提交
6594
EXPORT_SYMBOL_GPL(ata_std_bios_param);
J
Jeff Garzik 已提交
6595
EXPORT_SYMBOL_GPL(ata_host_init);
6596
EXPORT_SYMBOL_GPL(ata_host_alloc);
6597
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
T
Tejun Heo 已提交
6598
EXPORT_SYMBOL_GPL(ata_slave_link_init);
6599
EXPORT_SYMBOL_GPL(ata_host_start);
6600
EXPORT_SYMBOL_GPL(ata_host_register);
6601
EXPORT_SYMBOL_GPL(ata_host_activate);
T
Tejun Heo 已提交
6602
EXPORT_SYMBOL_GPL(ata_host_detach);
L
Linus Torvalds 已提交
6603
EXPORT_SYMBOL_GPL(ata_sg_init);
6604
EXPORT_SYMBOL_GPL(ata_qc_complete);
6605
EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
T
Tejun Heo 已提交
6606
EXPORT_SYMBOL_GPL(atapi_cmd_type);
L
Linus Torvalds 已提交
6607 6608
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
6609 6610 6611 6612 6613 6614 6615
EXPORT_SYMBOL_GPL(ata_pack_xfermask);
EXPORT_SYMBOL_GPL(ata_unpack_xfermask);
EXPORT_SYMBOL_GPL(ata_xfer_mask2mode);
EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
EXPORT_SYMBOL_GPL(ata_mode_string);
EXPORT_SYMBOL_GPL(ata_id_xfermask);
L
Linus Torvalds 已提交
6616
EXPORT_SYMBOL_GPL(ata_port_start);
6617
EXPORT_SYMBOL_GPL(ata_do_set_mode);
6618
EXPORT_SYMBOL_GPL(ata_std_qc_defer);
6619
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
L
Linus Torvalds 已提交
6620
EXPORT_SYMBOL_GPL(ata_port_probe);
6621
EXPORT_SYMBOL_GPL(ata_dev_disable);
6622
EXPORT_SYMBOL_GPL(sata_set_spd);
6623
EXPORT_SYMBOL_GPL(ata_wait_after_reset);
6624 6625
EXPORT_SYMBOL_GPL(sata_link_debounce);
EXPORT_SYMBOL_GPL(sata_link_resume);
6626
EXPORT_SYMBOL_GPL(ata_std_prereset);
T
Tejun Heo 已提交
6627
EXPORT_SYMBOL_GPL(sata_link_hardreset);
6628
EXPORT_SYMBOL_GPL(sata_std_hardreset);
6629
EXPORT_SYMBOL_GPL(ata_std_postreset);
6630 6631
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_pair);
L
Linus Torvalds 已提交
6632
EXPORT_SYMBOL_GPL(ata_port_disable);
6633
EXPORT_SYMBOL_GPL(ata_ratelimit);
6634
EXPORT_SYMBOL_GPL(ata_wait_register);
L
Linus Torvalds 已提交
6635 6636
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
6637
EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
6638
EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
6639 6640 6641 6642
EXPORT_SYMBOL_GPL(sata_scr_valid);
EXPORT_SYMBOL_GPL(sata_scr_read);
EXPORT_SYMBOL_GPL(sata_scr_write);
EXPORT_SYMBOL_GPL(sata_scr_write_flush);
6643 6644
EXPORT_SYMBOL_GPL(ata_link_online);
EXPORT_SYMBOL_GPL(ata_link_offline);
6645
#ifdef CONFIG_PM
J
Jeff Garzik 已提交
6646 6647
EXPORT_SYMBOL_GPL(ata_host_suspend);
EXPORT_SYMBOL_GPL(ata_host_resume);
6648
#endif /* CONFIG_PM */
6649 6650
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
6651
EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
L
Linus Torvalds 已提交
6652 6653
EXPORT_SYMBOL_GPL(ata_scsi_simulate);

6654
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
6655
EXPORT_SYMBOL_GPL(ata_timing_find_mode);
A
Alan Cox 已提交
6656 6657
EXPORT_SYMBOL_GPL(ata_timing_compute);
EXPORT_SYMBOL_GPL(ata_timing_merge);
6658
EXPORT_SYMBOL_GPL(ata_timing_cycle2mode);
A
Alan Cox 已提交
6659

L
Linus Torvalds 已提交
6660 6661 6662
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
6663
#ifdef CONFIG_PM
6664 6665
EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
J
Jens Axboe 已提交
6666 6667
EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
EXPORT_SYMBOL_GPL(ata_pci_device_resume);
6668
#endif /* CONFIG_PM */
L
Linus Torvalds 已提交
6669
#endif /* CONFIG_PCI */
J
Jens Axboe 已提交
6670

T
Tejun Heo 已提交
6671 6672 6673
EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
6674 6675 6676 6677
EXPORT_SYMBOL_GPL(ata_port_desc);
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
#endif /* CONFIG_PCI */
6678
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
6679
EXPORT_SYMBOL_GPL(ata_link_abort);
6680
EXPORT_SYMBOL_GPL(ata_port_abort);
6681
EXPORT_SYMBOL_GPL(ata_port_freeze);
6682
EXPORT_SYMBOL_GPL(sata_async_notification);
6683 6684
EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
6685 6686
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
6687
EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
T
Tejun Heo 已提交
6688
EXPORT_SYMBOL_GPL(ata_do_eh);
6689
EXPORT_SYMBOL_GPL(ata_std_error_handler);
A
Alan Cox 已提交
6690 6691 6692 6693

EXPORT_SYMBOL_GPL(ata_cable_40wire);
EXPORT_SYMBOL_GPL(ata_cable_80wire);
EXPORT_SYMBOL_GPL(ata_cable_unknown);
T
Tejun Heo 已提交
6694
EXPORT_SYMBOL_GPL(ata_cable_ignore);
A
Alan Cox 已提交
6695
EXPORT_SYMBOL_GPL(ata_cable_sata);