au1000_dma.h 11.1 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125
/*
 * BRIEF MODULE DESCRIPTION
 *	Defines for using and allocating dma channels on the Alchemy
 *      Au1000 mips processor.
 *
 * Copyright 2000 MontaVista Software Inc.
 * Author: MontaVista Software, Inc.
 *         	stevel@mvista.com or source@mvista.com
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *  You should have received a copy of the  GNU General Public License along
 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 *  675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */
#ifndef __ASM_AU1000_DMA_H
#define __ASM_AU1000_DMA_H

#include <asm/io.h>		/* need byte IO */
#include <linux/spinlock.h>	/* And spinlocks */
#include <linux/delay.h>
#include <asm/system.h>

#define NUM_AU1000_DMA_CHANNELS	8

/* DMA Channel Base Addresses */
#define DMA_CHANNEL_BASE	0xB4002000
#define DMA_CHANNEL_LEN		0x00000100

/* DMA Channel Register Offsets */
#define DMA_MODE_SET		0x00000000
#define DMA_MODE_READ		DMA_MODE_SET
#define DMA_MODE_CLEAR		0x00000004
/* DMA Mode register bits follow */
#define DMA_DAH_MASK		(0x0f << 20)
#define DMA_DID_BIT		16
#define DMA_DID_MASK		(0x0f << DMA_DID_BIT)
#define DMA_DS			(1<<15)
#define DMA_BE			(1<<13)
#define DMA_DR			(1<<12)
#define DMA_TS8			(1<<11)
#define DMA_DW_BIT		9
#define DMA_DW_MASK		(0x03 << DMA_DW_BIT)
#define DMA_DW8			(0 << DMA_DW_BIT)
#define DMA_DW16		(1 << DMA_DW_BIT)
#define DMA_DW32		(2 << DMA_DW_BIT)
#define DMA_NC			(1<<8)
#define DMA_IE			(1<<7)
#define DMA_HALT		(1<<6)
#define DMA_GO			(1<<5)
#define DMA_AB			(1<<4)
#define DMA_D1			(1<<3)
#define DMA_BE1			(1<<2)
#define DMA_D0			(1<<1)
#define DMA_BE0			(1<<0)

#define DMA_PERIPHERAL_ADDR       0x00000008
#define DMA_BUFFER0_START         0x0000000C
#define DMA_BUFFER1_START         0x00000014
#define DMA_BUFFER0_COUNT         0x00000010
#define DMA_BUFFER1_COUNT         0x00000018
#define DMA_BAH_BIT 16
#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
#define DMA_COUNT_BIT 0
#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)

/* DMA Device ID's follow */
enum {
	DMA_ID_UART0_TX = 0,
	DMA_ID_UART0_RX,
	DMA_ID_GP04,
	DMA_ID_GP05,
	DMA_ID_AC97C_TX,
	DMA_ID_AC97C_RX,
	DMA_ID_UART3_TX,
	DMA_ID_UART3_RX,
	DMA_ID_USBDEV_EP0_RX,
	DMA_ID_USBDEV_EP0_TX,
	DMA_ID_USBDEV_EP2_TX,
	DMA_ID_USBDEV_EP3_TX,
	DMA_ID_USBDEV_EP4_RX,
	DMA_ID_USBDEV_EP5_RX,
	DMA_ID_I2S_TX,
	DMA_ID_I2S_RX,
	DMA_NUM_DEV
};

/* DMA Device ID's for 2nd bank (AU1100) follow */
enum {
	DMA_ID_SD0_TX = 0,
	DMA_ID_SD0_RX,
	DMA_ID_SD1_TX,
	DMA_ID_SD1_RX,
	DMA_NUM_DEV_BANK2
};

struct dma_chan {
	int dev_id;		// this channel is allocated if >=0, free otherwise
	unsigned int io;
	const char *dev_str;
	int irq;
	void *irq_dev;
	unsigned int fifo_addr;
	unsigned int mode;
};

/* These are in arch/mips/au1000/common/dma.c */
extern struct dma_chan au1000_dma_table[];
extern int request_au1000_dma(int dev_id,
			      const char *dev_str,
126
			      irqreturn_t (*irqhandler)(int, void *),
L
Linus Torvalds 已提交
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445
			      unsigned long irqflags,
			      void *irq_dev_id);
extern void free_au1000_dma(unsigned int dmanr);
extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
				int length, int *eof, void *data);
extern void dump_au1000_dma_channel(unsigned int dmanr);
extern spinlock_t au1000_dma_spin_lock;


static __inline__ struct dma_chan *get_dma_chan(unsigned int dmanr)
{
	if (dmanr >= NUM_AU1000_DMA_CHANNELS
	    || au1000_dma_table[dmanr].dev_id < 0)
		return NULL;
	return &au1000_dma_table[dmanr];
}

static __inline__ unsigned long claim_dma_lock(void)
{
	unsigned long flags;
	spin_lock_irqsave(&au1000_dma_spin_lock, flags);
	return flags;
}

static __inline__ void release_dma_lock(unsigned long flags)
{
	spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
}

/*
 * Set the DMA buffer enable bits in the mode register.
 */
static __inline__ void enable_dma_buffer0(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	au_writel(DMA_BE0, chan->io + DMA_MODE_SET);
}
static __inline__ void enable_dma_buffer1(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	au_writel(DMA_BE1, chan->io + DMA_MODE_SET);
}
static __inline__ void enable_dma_buffers(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
}

static __inline__ void start_dma(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;

	au_writel(DMA_GO, chan->io + DMA_MODE_SET);
}

#define DMA_HALT_POLL 0x5000

static __inline__ void halt_dma(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	int i;
	if (!chan)
		return;

	au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
	// poll the halt bit
	for (i = 0; i < DMA_HALT_POLL; i++)
		if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
			break;
	if (i == DMA_HALT_POLL)
		printk(KERN_INFO "halt_dma: HALT poll expired!\n");
}


static __inline__ void disable_dma(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;

	halt_dma(dmanr);

	// now we can disable the buffers
	au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
}

static __inline__ int dma_halted(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return 1;
	return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
}

/* initialize a DMA channel */
static __inline__ void init_dma(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	u32 mode;
	if (!chan)
		return;

	disable_dma(dmanr);

	// set device FIFO address
	au_writel(CPHYSADDR(chan->fifo_addr),
		  chan->io + DMA_PERIPHERAL_ADDR);

	mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
	if (chan->irq)
		mode |= DMA_IE;

	au_writel(~mode, chan->io + DMA_MODE_CLEAR);
	au_writel(mode, chan->io + DMA_MODE_SET);
}

/*
 * set mode for a specific DMA channel
 */
static __inline__ void set_dma_mode(unsigned int dmanr, unsigned int mode)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	/*
	 * set_dma_mode is only allowed to change endianess, direction,
	 * transfer size, device FIFO width, and coherency settings.
	 * Make sure anything else is masked off.
	 */
	mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
	chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
	chan->mode |= mode;
}

static __inline__ unsigned int get_dma_mode(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return 0;
	return chan->mode;
}

static __inline__ int get_dma_active_buffer(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return -1;
	return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
}


/*
 * set the device FIFO address for a specific DMA channel - only
 * applicable to GPO4 and GPO5. All the other devices have fixed
 * FIFO addresses.
 */
static __inline__ void set_dma_fifo_addr(unsigned int dmanr,
					 unsigned int a)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;

	if (chan->mode & DMA_DS)	/* second bank of device ids */
		return;

	if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
		return;

	au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR);
}

/*
 * Clear the DMA buffer done bits in the mode register.
 */
static __inline__ void clear_dma_done0(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
}
static __inline__ void clear_dma_done1(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
}

/*
 * This does nothing - not applicable to Au1000 DMA.
 */
static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
{
}

/*
 * Set Buffer 0 transfer address for specific DMA channel.
 */
static __inline__ void set_dma_addr0(unsigned int dmanr, unsigned int a)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	au_writel(a, chan->io + DMA_BUFFER0_START);
}

/*
 * Set Buffer 1 transfer address for specific DMA channel.
 */
static __inline__ void set_dma_addr1(unsigned int dmanr, unsigned int a)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	au_writel(a, chan->io + DMA_BUFFER1_START);
}


/*
 * Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
 */
static __inline__ void set_dma_count0(unsigned int dmanr,
				      unsigned int count)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	count &= DMA_COUNT_MASK;
	au_writel(count, chan->io + DMA_BUFFER0_COUNT);
}

/*
 * Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
 */
static __inline__ void set_dma_count1(unsigned int dmanr,
				      unsigned int count)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	count &= DMA_COUNT_MASK;
	au_writel(count, chan->io + DMA_BUFFER1_COUNT);
}

/*
 * Set both buffer transfer sizes (max 64k) for a specific DMA channel.
 */
static __inline__ void set_dma_count(unsigned int dmanr,
				     unsigned int count)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return;
	count &= DMA_COUNT_MASK;
	au_writel(count, chan->io + DMA_BUFFER0_COUNT);
	au_writel(count, chan->io + DMA_BUFFER1_COUNT);
}

/*
 * Returns which buffer has its done bit set in the mode register.
 * Returns -1 if neither or both done bits set.
 */
static __inline__ unsigned int get_dma_buffer_done(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return 0;

    return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
}


/*
 * Returns the DMA channel's Buffer Done IRQ number.
 */
static __inline__ int get_dma_done_irq(unsigned int dmanr)
{
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return -1;

	return chan->irq;
}

/*
 * Get DMA residue count. Returns the number of _bytes_ left to transfer.
 */
static __inline__ int get_dma_residue(unsigned int dmanr)
{
	int curBufCntReg, count;
	struct dma_chan *chan = get_dma_chan(dmanr);
	if (!chan)
		return 0;

	curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ?
	    DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT;

	count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK;

	if ((chan->mode & DMA_DW_MASK) == DMA_DW16)
		count <<= 1;
	else if ((chan->mode & DMA_DW_MASK) == DMA_DW32)
		count <<= 2;

	return count;
}

#endif /* __ASM_AU1000_DMA_H */