ohci-at91.c 7.4 KB
Newer Older
1 2 3 4 5 6
/*
 * OHCI HCD (Host Controller Driver) for USB.
 *
 *  Copyright (C) 2004 SAN People (Pty) Ltd.
 *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
 *
7
 * AT91 Bus Glue
8 9 10 11 12 13 14 15 16 17 18 19 20 21
 *
 * Based on fragments of 2.4 driver by Rick Bronson.
 * Based on ohci-omap.c
 *
 * This file is licenced under the GPL.
 */

#include <linux/clk.h>
#include <linux/platform_device.h>

#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/board.h>

22 23
#ifndef CONFIG_ARCH_AT91
#error "CONFIG_ARCH_AT91 must be defined."
24 25 26 27
#endif

/* interface and function clocks */
static struct clk *iclk, *fclk;
28
static int clocked;
29 30 31 32 33 34 35 36 37 38

extern int usb_disabled(void);

/*-------------------------------------------------------------------------*/

static void at91_start_hc(struct platform_device *pdev)
{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	struct ohci_regs __iomem *regs = hcd->regs;

39
	dev_dbg(&pdev->dev, "start\n");
40 41 42 43 44 45

	/*
	 * Start the USB clocks.
	 */
	clk_enable(iclk);
	clk_enable(fclk);
46
	clocked = 1;
47 48 49 50 51 52 53 54 55 56 57 58

	/*
	 * The USB host controller must remain in reset.
	 */
	writel(0, &regs->control);
}

static void at91_stop_hc(struct platform_device *pdev)
{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	struct ohci_regs __iomem *regs = hcd->regs;

59
	dev_dbg(&pdev->dev, "stop\n");
60 61 62 63 64 65 66 67 68 69 70

	/*
	 * Put the USB host controller into reset.
	 */
	writel(0, &regs->control);

	/*
	 * Stop the USB clocks.
	 */
	clk_disable(fclk);
	clk_disable(iclk);
71
	clocked = 0;
72 73 74 75 76 77 78 79 80 81 82 83
}


/*-------------------------------------------------------------------------*/

static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);

/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */


/**
84
 * usb_hcd_at91_probe - initialize AT91-based HCDs
85 86 87 88 89 90
 * Context: !in_interrupt()
 *
 * Allocates basic resources for this USB host controller, and
 * then invokes the start() method for the HCD associated with it
 * through the hotplug entry's driver_data.
 */
91 92
static int usb_hcd_at91_probe(const struct hc_driver *driver,
			struct platform_device *pdev)
93 94 95 96 97 98 99 100 101
{
	int retval;
	struct usb_hcd *hcd = NULL;

	if (pdev->num_resources != 2) {
		pr_debug("hcd probe: invalid num_resources");
		return -ENODEV;
	}

102 103
	if ((pdev->resource[0].flags != IORESOURCE_MEM)
			|| (pdev->resource[1].flags != IORESOURCE_IRQ)) {
104 105 106 107
		pr_debug("hcd probe: invalid resource type\n");
		return -ENODEV;
	}

108
	hcd = usb_create_hcd(driver, &pdev->dev, "at91");
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132
	if (!hcd)
		return -ENOMEM;
	hcd->rsrc_start = pdev->resource[0].start;
	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;

	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
		pr_debug("request_mem_region failed\n");
		retval = -EBUSY;
		goto err1;
	}

	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
	if (!hcd->regs) {
		pr_debug("ioremap failed\n");
		retval = -EIO;
		goto err2;
	}

	iclk = clk_get(&pdev->dev, "ohci_clk");
	fclk = clk_get(&pdev->dev, "uhpck");

	at91_start_hc(pdev);
	ohci_hcd_init(hcd_to_ohci(hcd));

133
	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156
	if (retval == 0)
		return retval;

	/* Error handling */
	at91_stop_hc(pdev);

	clk_put(fclk);
	clk_put(iclk);

	iounmap(hcd->regs);

 err2:
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);

 err1:
	usb_put_hcd(hcd);
	return retval;
}


/* may be called with controller, bus, and devices active */

/**
157
 * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
158 159 160 161 162
 * @dev: USB Host Controller being removed
 * Context: !in_interrupt()
 *
 * Reverses the effect of usb_hcd_at91_probe(), first invoking
 * the HCD's stop() method.  It is always called from a thread
163
 * context, "rmmod" or something similar.
164 165
 *
 */
166 167
static int usb_hcd_at91_remove(struct usb_hcd *hcd,
				struct platform_device *pdev)
168 169 170 171
{
	usb_remove_hcd(hcd);
	at91_stop_hc(pdev);
	iounmap(hcd->regs);
172
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
173
	disable_irq_wake(hcd->irq);
174

175 176 177
	clk_put(fclk);
	clk_put(iclk);
	fclk = iclk = NULL;
178 179 180 181 182 183 184 185 186 187

	dev_set_drvdata(&pdev->dev, NULL);
	return 0;
}

/*-------------------------------------------------------------------------*/

static int __devinit
ohci_at91_start (struct usb_hcd *hcd)
{
188
	struct at91_usbh_data	*board = hcd->self.controller->platform_data;
189
	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
190
	struct usb_device	*root = hcd->self.root_hub;
191 192 193 194 195
	int			ret;

	if ((ret = ohci_init(ohci)) < 0)
		return ret;

196 197
	root->maxchild = board->ports;

198 199 200 201 202 203 204 205 206 207 208 209
	if ((ret = ohci_run(ohci)) < 0) {
		err("can't start %s", hcd->self.bus_name);
		ohci_stop(hcd);
		return ret;
	}
	return 0;
}

/*-------------------------------------------------------------------------*/

static const struct hc_driver ohci_at91_hc_driver = {
	.description =		hcd_name,
210
	.product_desc =		"AT91 OHCI",
211 212 213 214 215 216 217 218 219 220 221 222 223
	.hcd_priv_size =	sizeof(struct ohci_hcd),

	/*
	 * generic hardware linkage
	 */
	.irq =			ohci_irq,
	.flags =		HCD_USB11 | HCD_MEMORY,

	/*
	 * basic lifecycle operations
	 */
	.start =		ohci_at91_start,
	.stop =			ohci_stop,
224
	.shutdown = 		ohci_shutdown,
225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242

	/*
	 * managing i/o requests and associated device resources
	 */
	.urb_enqueue =		ohci_urb_enqueue,
	.urb_dequeue =		ohci_urb_dequeue,
	.endpoint_disable =	ohci_endpoint_disable,

	/*
	 * scheduling support
	 */
	.get_frame_number =	ohci_get_frame,

	/*
	 * root hub support
	 */
	.hub_status_data =	ohci_hub_status_data,
	.hub_control =		ohci_hub_control,
243
	.hub_irq_enable =	ohci_rhsc_enable,
244
#ifdef CONFIG_PM
245 246
	.bus_suspend =		ohci_bus_suspend,
	.bus_resume =		ohci_bus_resume,
247 248 249 250 251 252
#endif
	.start_port_reset =	ohci_start_port_reset,
};

/*-------------------------------------------------------------------------*/

253
static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
254
{
255 256
	device_init_wakeup(&pdev->dev, 1);
	return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
257 258
}

259
static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
260
{
261 262
	device_init_wakeup(&pdev->dev, 0);
	return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
263 264 265 266
}

#ifdef CONFIG_PM

267
static int
268
ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
269
{
270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290
	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);

	if (device_may_wakeup(&pdev->dev))
		enable_irq_wake(hcd->irq);
	else
		disable_irq_wake(hcd->irq);

	/*
	 * The integrated transceivers seem unable to notice disconnect,
	 * reconnect, or wakeup without the 48 MHz clock active.  so for
	 * correctness, always discard connection state (using reset).
	 *
	 * REVISIT: some boards will be able to turn VBUS off...
	 */
	if (at91_suspend_entering_slow_clock()) {
		ohci_usb_reset (ohci);
		clk_disable(fclk);
		clk_disable(iclk);
		clocked = 0;
	}
291 292 293 294

	return 0;
}

295
static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
296
{
297 298 299 300
	if (!clocked) {
		clk_enable(iclk);
		clk_enable(fclk);
	}
301 302 303 304 305 306 307 308

	return 0;
}
#else
#define ohci_hcd_at91_drv_suspend NULL
#define ohci_hcd_at91_drv_resume  NULL
#endif

309
MODULE_ALIAS("at91_ohci");
310

311 312 313
static struct platform_driver ohci_hcd_at91_driver = {
	.probe		= ohci_hcd_at91_drv_probe,
	.remove		= ohci_hcd_at91_drv_remove,
314
	.shutdown	= usb_hcd_platform_shutdown,
315 316 317
	.suspend	= ohci_hcd_at91_drv_suspend,
	.resume		= ohci_hcd_at91_drv_resume,
	.driver		= {
318
		.name	= "at91_ohci",
319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337
		.owner	= THIS_MODULE,
	},
};

static int __init ohci_hcd_at91_init (void)
{
	if (usb_disabled())
		return -ENODEV;

	return platform_driver_register(&ohci_hcd_at91_driver);
}

static void __exit ohci_hcd_at91_cleanup (void)
{
	platform_driver_unregister(&ohci_hcd_at91_driver);
}

module_init (ohci_hcd_at91_init);
module_exit (ohci_hcd_at91_cleanup);