cpuidle.c 6.5 KB
Newer Older
J
Jaecheol Lee 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13
/* linux/arch/arm/mach-exynos4/cpuidle.c
 *
 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/cpuidle.h>
14
#include <linux/cpu_pm.h>
J
Jaecheol Lee 已提交
15
#include <linux/io.h>
16 17
#include <linux/export.h>
#include <linux/time.h>
18
#include <linux/platform_device.h>
J
Jaecheol Lee 已提交
19 20

#include <asm/proc-fns.h>
21 22 23
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <asm/unified.h>
24
#include <asm/cpuidle.h>
25 26

#include <plat/cpu.h>
27
#include <plat/pm.h>
28

29 30
#include <mach/map.h>

31
#include "common.h"
32
#include "regs-pmu.h"
33

34 35 36 37 38 39 40 41
#define REG_DIRECTGO_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
			(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
#define REG_DIRECTGO_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
			(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))

#define S5P_CHECK_AFTR		0xFCBA0D10
J
Jaecheol Lee 已提交
42

43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
#define EXYNOS5_PWR_CTRL1			(S5P_VA_CMU + 0x01020)
#define EXYNOS5_PWR_CTRL2			(S5P_VA_CMU + 0x01024)

#define PWR_CTRL1_CORE2_DOWN_RATIO		(7 << 28)
#define PWR_CTRL1_CORE1_DOWN_RATIO		(7 << 16)
#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)

#define PWR_CTRL2_DIV2_UP_EN			(1 << 25)
#define PWR_CTRL2_DIV1_UP_EN			(1 << 24)
#define PWR_CTRL2_DUR_STANDBY2_VAL		(1 << 16)
#define PWR_CTRL2_DUR_STANDBY1_VAL		(1 << 8)
#define PWR_CTRL2_CORE2_UP_RATIO		(1 << 4)
#define PWR_CTRL2_CORE1_UP_RATIO		(1 << 0)

62 63 64
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
				struct cpuidle_driver *drv,
				int index);
J
Jaecheol Lee 已提交
65 66 67 68

static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);

static struct cpuidle_driver exynos4_idle_driver = {
69 70
	.name			= "exynos4_idle",
	.owner			= THIS_MODULE,
71 72 73 74 75 76 77 78 79 80 81 82 83
	.states = {
		[0] = ARM_CPUIDLE_WFI_STATE,
		[1] = {
			.enter			= exynos4_enter_lowpower,
			.exit_latency		= 300,
			.target_residency	= 100000,
			.flags			= CPUIDLE_FLAG_TIME_VALID,
			.name			= "C1",
			.desc			= "ARM power down",
		},
	},
	.state_count = 2,
	.safe_state_index = 0,
J
Jaecheol Lee 已提交
84 85
};

86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos4_set_wakeupmask(void)
{
	__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
}

static unsigned int g_pwr_ctrl, g_diag_reg;

static void save_cpu_arch_register(void)
{
	/*read power control register*/
	asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
	/*read diagnostic register*/
	asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
	return;
}

static void restore_cpu_arch_register(void)
{
	/*write power control register*/
	asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
	/*write diagnostic register*/
	asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
	return;
}

static int idle_finisher(unsigned long flags)
{
	cpu_do_idle();
	return 1;
}

static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
				struct cpuidle_driver *drv,
				int index)
{
	unsigned long tmp;

	exynos4_set_wakeupmask();

	/* Set value of power down register for aftr mode */
127
	exynos_sys_powerdown_conf(SYS_AFTR);
128

129
	__raw_writel(virt_to_phys(exynos_cpu_resume), REG_DIRECTGO_ADDR);
130 131 132 133 134 135 136 137 138 139 140 141 142
	__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);

	save_cpu_arch_register();

	/* Setting Central Sequence Register for power down mode */
	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);

	cpu_pm_enter();
	cpu_suspend(0, idle_finisher);

#ifdef CONFIG_SMP
143 144
	if (!soc_is_exynos5250())
		scu_enable(S5P_VA_SCU);
145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164
#endif
	cpu_pm_exit();

	restore_cpu_arch_register();

	/*
	 * If PMU failed while entering sleep mode, WFI will be
	 * ignored by PMU and then exiting cpu_do_idle().
	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
	 * in this situation.
	 */
	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
		tmp |= S5P_CENTRAL_LOWPWR_CFG;
		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
	}

	/* Clear wakeup state register */
	__raw_writel(0x0, S5P_WAKEUP_STAT);

165
	return index;
J
Jaecheol Lee 已提交
166 167
}

168 169 170 171 172 173
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
				struct cpuidle_driver *drv,
				int index)
{
	int new_index = index;

174 175
	/* AFTR can only be entered when cores other than CPU0 are offline */
	if (num_online_cpus() > 1 || dev->cpu != 0)
176 177 178
		new_index = drv->safe_state_index;

	if (new_index == 0)
179
		return arm_cpuidle_simple_enter(dev, drv, new_index);
180 181 182 183
	else
		return exynos4_enter_core0_aftr(dev, drv, new_index);
}

184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215
static void __init exynos5_core_down_clk(void)
{
	unsigned int tmp;

	/*
	 * Enable arm clock down (in idle) and set arm divider
	 * ratios in WFI/WFE state.
	 */
	tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
	      PWR_CTRL1_CORE1_DOWN_RATIO | \
	      PWR_CTRL1_DIV2_DOWN_EN	 | \
	      PWR_CTRL1_DIV1_DOWN_EN	 | \
	      PWR_CTRL1_USE_CORE1_WFE	 | \
	      PWR_CTRL1_USE_CORE0_WFE	 | \
	      PWR_CTRL1_USE_CORE1_WFI	 | \
	      PWR_CTRL1_USE_CORE0_WFI;
	__raw_writel(tmp, EXYNOS5_PWR_CTRL1);

	/*
	 * Enable arm clock up (on exiting idle). Set arm divider
	 * ratios when not in idle along with the standby duration
	 * ratios.
	 */
	tmp = PWR_CTRL2_DIV2_UP_EN	 | \
	      PWR_CTRL2_DIV1_UP_EN	 | \
	      PWR_CTRL2_DUR_STANDBY2_VAL | \
	      PWR_CTRL2_DUR_STANDBY1_VAL | \
	      PWR_CTRL2_CORE2_UP_RATIO	 | \
	      PWR_CTRL2_CORE1_UP_RATIO;
	__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
}

216
static int exynos_cpuidle_probe(struct platform_device *pdev)
J
Jaecheol Lee 已提交
217
{
218
	int cpu_id, ret;
J
Jaecheol Lee 已提交
219
	struct cpuidle_device *device;
220

221 222 223
	if (soc_is_exynos5250())
		exynos5_core_down_clk();

224 225 226
	if (soc_is_exynos5440())
		exynos4_idle_driver.state_count = 1;

227 228
	ret = cpuidle_register_driver(&exynos4_idle_driver);
	if (ret) {
229
		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
230
		return ret;
231
	}
J
Jaecheol Lee 已提交
232

233
	for_each_online_cpu(cpu_id) {
J
Jaecheol Lee 已提交
234 235 236
		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
		device->cpu = cpu_id;

237 238
		ret = cpuidle_register_device(device);
		if (ret) {
239
			dev_err(&pdev->dev, "failed to register cpuidle device\n");
240
			return ret;
J
Jaecheol Lee 已提交
241 242
		}
	}
243

J
Jaecheol Lee 已提交
244 245
	return 0;
}
246 247 248 249 250 251 252 253 254 255

static struct platform_driver exynos_cpuidle_driver = {
	.probe	= exynos_cpuidle_probe,
	.driver = {
		.name = "exynos_cpuidle",
		.owner = THIS_MODULE,
	},
};

module_platform_driver(exynos_cpuidle_driver);