hid-sony.c 22.1 KB
Newer Older
J
Jiri Slaby 已提交
1
/*
2
 *  HID driver for Sony / PS2 / PS3 BD devices.
J
Jiri Slaby 已提交
3 4 5 6 7
 *
 *  Copyright (c) 1999 Andreas Gal
 *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
 *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
 *  Copyright (c) 2008 Jiri Slaby
8 9
 *  Copyright (c) 2012 David Dillow <dave@thedillows.org>
 *  Copyright (c) 2006-2013 Jiri Kosina
10
 *  Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com>
J
Jiri Slaby 已提交
11 12 13 14 15 16 17 18 19
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 */

20 21 22 23 24 25 26
/* NOTE: in order for the Sony PS3 BD Remote Control to be found by
 * a Bluetooth host, the key combination Start+Enter has to be kept pressed
 * for about 7 seconds with the Bluetooth Host Controller in discovering mode.
 *
 * There will be no PIN request from the device.
 */

J
Jiri Slaby 已提交
27 28 29
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
30
#include <linux/slab.h>
J
Jiri Slaby 已提交
31
#include <linux/usb.h>
J
Jiri Kosina 已提交
32
#include <linux/leds.h>
J
Jiri Slaby 已提交
33 34 35

#include "hid-ids.h"

36 37 38 39 40
#define VAIO_RDESC_CONSTANT     BIT(0)
#define SIXAXIS_CONTROLLER_USB  BIT(1)
#define SIXAXIS_CONTROLLER_BT   BIT(2)
#define BUZZ_CONTROLLER         BIT(3)
#define PS3REMOTE		BIT(4)
41

42 43
#define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER_USB | BUZZ_CONTROLLER)

44 45 46 47 48 49
static const u8 sixaxis_rdesc_fixup[] = {
	0x95, 0x13, 0x09, 0x01, 0x81, 0x02, 0x95, 0x0C,
	0x81, 0x01, 0x75, 0x10, 0x95, 0x04, 0x26, 0xFF,
	0x03, 0x46, 0xFF, 0x03, 0x09, 0x01, 0x81, 0x02
};

50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
static const u8 sixaxis_rdesc_fixup2[] = {
	0x05, 0x01, 0x09, 0x04, 0xa1, 0x01, 0xa1, 0x02,
	0x85, 0x01, 0x75, 0x08, 0x95, 0x01, 0x15, 0x00,
	0x26, 0xff, 0x00, 0x81, 0x03, 0x75, 0x01, 0x95,
	0x13, 0x15, 0x00, 0x25, 0x01, 0x35, 0x00, 0x45,
	0x01, 0x05, 0x09, 0x19, 0x01, 0x29, 0x13, 0x81,
	0x02, 0x75, 0x01, 0x95, 0x0d, 0x06, 0x00, 0xff,
	0x81, 0x03, 0x15, 0x00, 0x26, 0xff, 0x00, 0x05,
	0x01, 0x09, 0x01, 0xa1, 0x00, 0x75, 0x08, 0x95,
	0x04, 0x35, 0x00, 0x46, 0xff, 0x00, 0x09, 0x30,
	0x09, 0x31, 0x09, 0x32, 0x09, 0x35, 0x81, 0x02,
	0xc0, 0x05, 0x01, 0x95, 0x13, 0x09, 0x01, 0x81,
	0x02, 0x95, 0x0c, 0x81, 0x01, 0x75, 0x10, 0x95,
	0x04, 0x26, 0xff, 0x03, 0x46, 0xff, 0x03, 0x09,
	0x01, 0x81, 0x02, 0xc0, 0xa1, 0x02, 0x85, 0x02,
	0x75, 0x08, 0x95, 0x30, 0x09, 0x01, 0xb1, 0x02,
	0xc0, 0xa1, 0x02, 0x85, 0xee, 0x75, 0x08, 0x95,
	0x30, 0x09, 0x01, 0xb1, 0x02, 0xc0, 0xa1, 0x02,
	0x85, 0xef, 0x75, 0x08, 0x95, 0x30, 0x09, 0x01,
	0xb1, 0x02, 0xc0, 0xc0,
};

72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187
static __u8 ps3remote_rdesc[] = {
	0x05, 0x01,          /* GUsagePage Generic Desktop */
	0x09, 0x05,          /* LUsage 0x05 [Game Pad] */
	0xA1, 0x01,          /* MCollection Application (mouse, keyboard) */

	 /* Use collection 1 for joypad buttons */
	 0xA1, 0x02,         /* MCollection Logical (interrelated data) */

	  /* Ignore the 1st byte, maybe it is used for a controller
	   * number but it's not needed for correct operation */
	  0x75, 0x08,        /* GReportSize 0x08 [8] */
	  0x95, 0x01,        /* GReportCount 0x01 [1] */
	  0x81, 0x01,        /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */

	  /* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these
	   * buttons multiple keypresses are allowed */
	  0x05, 0x09,        /* GUsagePage Button */
	  0x19, 0x01,        /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */
	  0x29, 0x18,        /* LUsageMaximum 0x18 [Button 24] */
	  0x14,              /* GLogicalMinimum [0] */
	  0x25, 0x01,        /* GLogicalMaximum 0x01 [1] */
	  0x75, 0x01,        /* GReportSize 0x01 [1] */
	  0x95, 0x18,        /* GReportCount 0x18 [24] */
	  0x81, 0x02,        /* MInput 0x02 (Data[0] Var[1] Abs[2]) */

	  0xC0,              /* MEndCollection */

	 /* Use collection 2 for remote control buttons */
	 0xA1, 0x02,         /* MCollection Logical (interrelated data) */

	  /* 5th byte is used for remote control buttons */
	  0x05, 0x09,        /* GUsagePage Button */
	  0x18,              /* LUsageMinimum [No button pressed] */
	  0x29, 0xFE,        /* LUsageMaximum 0xFE [Button 254] */
	  0x14,              /* GLogicalMinimum [0] */
	  0x26, 0xFE, 0x00,  /* GLogicalMaximum 0x00FE [254] */
	  0x75, 0x08,        /* GReportSize 0x08 [8] */
	  0x95, 0x01,        /* GReportCount 0x01 [1] */
	  0x80,              /* MInput  */

	  /* Ignore bytes from 6th to 11th, 6th to 10th are always constant at
	   * 0xff and 11th is for press indication */
	  0x75, 0x08,        /* GReportSize 0x08 [8] */
	  0x95, 0x06,        /* GReportCount 0x06 [6] */
	  0x81, 0x01,        /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */

	  /* 12th byte is for battery strength */
	  0x05, 0x06,        /* GUsagePage Generic Device Controls */
	  0x09, 0x20,        /* LUsage 0x20 [Battery Strength] */
	  0x14,              /* GLogicalMinimum [0] */
	  0x25, 0x05,        /* GLogicalMaximum 0x05 [5] */
	  0x75, 0x08,        /* GReportSize 0x08 [8] */
	  0x95, 0x01,        /* GReportCount 0x01 [1] */
	  0x81, 0x02,        /* MInput 0x02 (Data[0] Var[1] Abs[2]) */

	  0xC0,              /* MEndCollection */

	 0xC0                /* MEndCollection [Game Pad] */
};

static const unsigned int ps3remote_keymap_joypad_buttons[] = {
	[0x01] = KEY_SELECT,
	[0x02] = BTN_THUMBL,		/* L3 */
	[0x03] = BTN_THUMBR,		/* R3 */
	[0x04] = BTN_START,
	[0x05] = KEY_UP,
	[0x06] = KEY_RIGHT,
	[0x07] = KEY_DOWN,
	[0x08] = KEY_LEFT,
	[0x09] = BTN_TL2,		/* L2 */
	[0x0a] = BTN_TR2,		/* R2 */
	[0x0b] = BTN_TL,		/* L1 */
	[0x0c] = BTN_TR,		/* R1 */
	[0x0d] = KEY_OPTION,		/* options/triangle */
	[0x0e] = KEY_BACK,		/* back/circle */
	[0x0f] = BTN_0,			/* cross */
	[0x10] = KEY_SCREEN,		/* view/square */
	[0x11] = KEY_HOMEPAGE,		/* PS button */
	[0x14] = KEY_ENTER,
};
static const unsigned int ps3remote_keymap_remote_buttons[] = {
	[0x00] = KEY_1,
	[0x01] = KEY_2,
	[0x02] = KEY_3,
	[0x03] = KEY_4,
	[0x04] = KEY_5,
	[0x05] = KEY_6,
	[0x06] = KEY_7,
	[0x07] = KEY_8,
	[0x08] = KEY_9,
	[0x09] = KEY_0,
	[0x0e] = KEY_ESC,		/* return */
	[0x0f] = KEY_CLEAR,
	[0x16] = KEY_EJECTCD,
	[0x1a] = KEY_MENU,		/* top menu */
	[0x28] = KEY_TIME,
	[0x30] = KEY_PREVIOUS,
	[0x31] = KEY_NEXT,
	[0x32] = KEY_PLAY,
	[0x33] = KEY_REWIND,		/* scan back */
	[0x34] = KEY_FORWARD,		/* scan forward */
	[0x38] = KEY_STOP,
	[0x39] = KEY_PAUSE,
	[0x40] = KEY_CONTEXT_MENU,	/* pop up/menu */
	[0x60] = KEY_FRAMEBACK,		/* slow/step back */
	[0x61] = KEY_FRAMEFORWARD,	/* slow/step forward */
	[0x63] = KEY_SUBTITLE,
	[0x64] = KEY_AUDIO,
	[0x65] = KEY_ANGLE,
	[0x70] = KEY_INFO,		/* display */
	[0x80] = KEY_BLUE,
	[0x81] = KEY_RED,
	[0x82] = KEY_GREEN,
	[0x83] = KEY_YELLOW,
};

188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226
static const unsigned int buzz_keymap[] = {
	/* The controller has 4 remote buzzers, each with one LED and 5
	 * buttons.
	 * 
	 * We use the mapping chosen by the controller, which is:
	 *
	 * Key          Offset
	 * -------------------
	 * Buzz              1
	 * Blue              5
	 * Orange            4
	 * Green             3
	 * Yellow            2
	 *
	 * So, for example, the orange button on the third buzzer is mapped to
	 * BTN_TRIGGER_HAPPY14
	 */
	[ 1] = BTN_TRIGGER_HAPPY1,
	[ 2] = BTN_TRIGGER_HAPPY2,
	[ 3] = BTN_TRIGGER_HAPPY3,
	[ 4] = BTN_TRIGGER_HAPPY4,
	[ 5] = BTN_TRIGGER_HAPPY5,
	[ 6] = BTN_TRIGGER_HAPPY6,
	[ 7] = BTN_TRIGGER_HAPPY7,
	[ 8] = BTN_TRIGGER_HAPPY8,
	[ 9] = BTN_TRIGGER_HAPPY9,
	[10] = BTN_TRIGGER_HAPPY10,
	[11] = BTN_TRIGGER_HAPPY11,
	[12] = BTN_TRIGGER_HAPPY12,
	[13] = BTN_TRIGGER_HAPPY13,
	[14] = BTN_TRIGGER_HAPPY14,
	[15] = BTN_TRIGGER_HAPPY15,
	[16] = BTN_TRIGGER_HAPPY16,
	[17] = BTN_TRIGGER_HAPPY17,
	[18] = BTN_TRIGGER_HAPPY18,
	[19] = BTN_TRIGGER_HAPPY19,
	[20] = BTN_TRIGGER_HAPPY20,
};

227
struct sony_sc {
228
	struct hid_device *hdev;
229
	struct led_classdev *leds[4];
230
	unsigned long quirks;
231
	struct work_struct state_worker;
232

233 234 235 236 237
#ifdef CONFIG_SONY_FF
	__u8 left;
	__u8 right;
#endif

238
	__u8 led_state;
239 240
};

241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282
static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc,
			     unsigned int *rsize)
{
	*rsize = sizeof(ps3remote_rdesc);
	return ps3remote_rdesc;
}

static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi,
			     struct hid_field *field, struct hid_usage *usage,
			     unsigned long **bit, int *max)
{
	unsigned int key = usage->hid & HID_USAGE;

	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
		return -1;

	switch (usage->collection_index) {
	case 1:
		if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons))
			return -1;

		key = ps3remote_keymap_joypad_buttons[key];
		if (!key)
			return -1;
		break;
	case 2:
		if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons))
			return -1;

		key = ps3remote_keymap_remote_buttons[key];
		if (!key)
			return -1;
		break;
	default:
		return -1;
	}

	hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
	return 1;
}


283
/* Sony Vaio VGX has wrongly mouse pointer declared as constant */
284 285
static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
		unsigned int *rsize)
286 287 288
{
	struct sony_sc *sc = hid_get_drvdata(hdev);

289 290 291 292 293 294 295 296 297 298 299
	/*
	 * Some Sony RF receivers wrongly declare the mouse pointer as a
	 * a constant non-data variable.
	 */
	if ((sc->quirks & VAIO_RDESC_CONSTANT) && *rsize >= 56 &&
	    /* usage page: generic desktop controls */
	    /* rdesc[0] == 0x05 && rdesc[1] == 0x01 && */
	    /* usage: mouse */
	    rdesc[2] == 0x09 && rdesc[3] == 0x02 &&
	    /* input (usage page for x,y axes): constant, variable, relative */
	    rdesc[54] == 0x81 && rdesc[55] == 0x07) {
300
		hid_info(hdev, "Fixing up Sony RF Receiver report descriptor\n");
301
		/* input: data, variable, relative */
302 303
		rdesc[55] = 0x06;
	}
304 305 306 307 308 309 310 311

	/* The HID descriptor exposed over BT has a trailing zero byte */
	if ((((sc->quirks & SIXAXIS_CONTROLLER_USB) && *rsize == 148) ||
			((sc->quirks & SIXAXIS_CONTROLLER_BT) && *rsize == 149)) &&
			rdesc[83] == 0x75) {
		hid_info(hdev, "Fixing up Sony Sixaxis report descriptor\n");
		memcpy((void *)&rdesc[83], (void *)&sixaxis_rdesc_fixup,
			sizeof(sixaxis_rdesc_fixup));
312 313 314 315 316 317
	} else if (sc->quirks & SIXAXIS_CONTROLLER_USB &&
		   *rsize > sizeof(sixaxis_rdesc_fixup2)) {
		hid_info(hdev, "Sony Sixaxis clone detected. Using original report descriptor (size: %d clone; %d new)\n",
			 *rsize, (int)sizeof(sixaxis_rdesc_fixup2));
		*rsize = sizeof(sixaxis_rdesc_fixup2);
		memcpy(rdesc, &sixaxis_rdesc_fixup2, *rsize);
318
	}
319 320 321 322

	if (sc->quirks & PS3REMOTE)
		return ps3remote_fixup(hdev, rdesc, rsize);

323
	return rdesc;
324 325
}

326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344
static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
		__u8 *rd, int size)
{
	struct sony_sc *sc = hid_get_drvdata(hdev);

	/* Sixaxis HID report has acclerometers/gyro with MSByte first, this
	 * has to be BYTE_SWAPPED before passing up to joystick interface
	 */
	if ((sc->quirks & (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)) &&
			rd[0] == 0x01 && size == 49) {
		swap(rd[41], rd[42]);
		swap(rd[43], rd[44]);
		swap(rd[45], rd[46]);
		swap(rd[47], rd[48]);
	}

	return 0;
}

345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373
static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
			struct hid_field *field, struct hid_usage *usage,
			unsigned long **bit, int *max)
{
	struct sony_sc *sc = hid_get_drvdata(hdev);

	if (sc->quirks & BUZZ_CONTROLLER) {
		unsigned int key = usage->hid & HID_USAGE;

		if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
			return -1;

		switch (usage->collection_index) {
		case 1:
			if (key >= ARRAY_SIZE(buzz_keymap))
				return -1;

			key = buzz_keymap[key];
			if (!key)
				return -1;
			break;
		default:
			return -1;
		}

		hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
		return 1;
	}

374 375 376
	if (sc->quirks & PS3REMOTE)
		return ps3remote_mapping(hdev, hi, field, usage, bit, max);

377 378
	/* Let hid-core decide for the others */
	return 0;
379 380
}

381 382 383 384 385 386 387 388 389 390
/*
 * The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
 * like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
 * so we need to override that forcing HID Output Reports on the Control EP.
 *
 * There is also another issue about HID Output Reports via USB, the Sixaxis
 * does not want the report_id as part of the data packet, so we have to
 * discard buf[0] when sending the actual control message, even for numbered
 * reports, humpf!
 */
391 392 393 394 395 396 397 398 399
static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf,
		size_t count, unsigned char report_type)
{
	struct usb_interface *intf = to_usb_interface(hid->dev.parent);
	struct usb_device *dev = interface_to_usbdev(intf);
	struct usb_host_interface *interface = intf->cur_altsetting;
	int report_id = buf[0];
	int ret;

400 401 402 403 404 405
	if (report_type == HID_OUTPUT_REPORT) {
		/* Don't send the Report ID */
		buf++;
		count--;
	}

406 407 408 409 410 411 412
	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
		HID_REQ_SET_REPORT,
		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
		((report_type + 1) << 8) | report_id,
		interface->desc.bInterfaceNumber, buf, count,
		USB_CTRL_SET_TIMEOUT);

413 414 415 416
	/* Count also the Report ID, in case of an Output report. */
	if (ret > 0 && report_type == HID_OUTPUT_REPORT)
		ret++;

417 418 419
	return ret;
}

J
Jiri Slaby 已提交
420 421 422 423 424
/*
 * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
 * to "operational".  Without this, the ps3 controller will not report any
 * events.
 */
425
static int sixaxis_set_operational_usb(struct hid_device *hdev)
J
Jiri Slaby 已提交
426 427 428 429 430 431 432
{
	int ret;
	char *buf = kmalloc(18, GFP_KERNEL);

	if (!buf)
		return -ENOMEM;

433 434
	ret = hdev->hid_get_raw_report(hdev, 0xf2, buf, 17, HID_FEATURE_REPORT);

J
Jiri Slaby 已提交
435
	if (ret < 0)
436
		hid_err(hdev, "can't set operational mode\n");
J
Jiri Slaby 已提交
437 438 439 440 441 442

	kfree(buf);

	return ret;
}

443
static int sixaxis_set_operational_bt(struct hid_device *hdev)
444
{
445
	unsigned char buf[] = { 0xf4,  0x42, 0x03, 0x00, 0x00 };
446 447 448
	return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
}

449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466
static void buzz_set_leds(struct hid_device *hdev, int leds)
{
	struct list_head *report_list =
		&hdev->report_enum[HID_OUTPUT_REPORT].report_list;
	struct hid_report *report = list_entry(report_list->next,
		struct hid_report, list);
	__s32 *value = report->field[0]->value;

	value[0] = 0x00;
	value[1] = (leds & 1) ? 0xff : 0x00;
	value[2] = (leds & 2) ? 0xff : 0x00;
	value[3] = (leds & 4) ? 0xff : 0x00;
	value[4] = (leds & 8) ? 0xff : 0x00;
	value[5] = 0x00;
	value[6] = 0x00;
	hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
}

467 468 469 470 471 472 473 474 475 476 477 478
static void sony_set_leds(struct hid_device *hdev, __u8 leds)
{
	struct sony_sc *drv_data = hid_get_drvdata(hdev);

	if (drv_data->quirks & BUZZ_CONTROLLER) {
		buzz_set_leds(hdev, leds);
	} else if (drv_data->quirks & SIXAXIS_CONTROLLER_USB) {
		drv_data->led_state = leds;
		schedule_work(&drv_data->state_worker);
	}
}

479
static void sony_led_set_brightness(struct led_classdev *led,
480 481 482 483 484 485 486 487 488
				    enum led_brightness value)
{
	struct device *dev = led->dev->parent;
	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
	struct sony_sc *drv_data;

	int n;

	drv_data = hid_get_drvdata(hdev);
489
	if (!drv_data) {
490 491 492 493 494
		hid_err(hdev, "No device data\n");
		return;
	}

	for (n = 0; n < 4; n++) {
495 496
		if (led == drv_data->leds[n]) {
			int on = !!(drv_data->led_state & (1 << n));
497
			if (value == LED_OFF && on) {
498
				drv_data->led_state &= ~(1 << n);
499
				sony_set_leds(hdev, drv_data->led_state);
500
			} else if (value != LED_OFF && !on) {
501
				drv_data->led_state |= (1 << n);
502
				sony_set_leds(hdev, drv_data->led_state);
503 504 505 506 507 508
			}
			break;
		}
	}
}

509
static enum led_brightness sony_led_get_brightness(struct led_classdev *led)
510 511 512 513 514 515 516 517 518
{
	struct device *dev = led->dev->parent;
	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
	struct sony_sc *drv_data;

	int n;
	int on = 0;

	drv_data = hid_get_drvdata(hdev);
519
	if (!drv_data) {
520 521 522 523 524
		hid_err(hdev, "No device data\n");
		return LED_OFF;
	}

	for (n = 0; n < 4; n++) {
525 526
		if (led == drv_data->leds[n]) {
			on = !!(drv_data->led_state & (1 << n));
527 528 529 530 531 532 533
			break;
		}
	}

	return on ? LED_FULL : LED_OFF;
}

534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552
static void sony_leds_remove(struct hid_device *hdev)
{
	struct sony_sc *drv_data;
	struct led_classdev *led;
	int n;

	drv_data = hid_get_drvdata(hdev);
	BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT));

	for (n = 0; n < 4; n++) {
		led = drv_data->leds[n];
		drv_data->leds[n] = NULL;
		if (!led)
			continue;
		led_classdev_unregister(led);
		kfree(led);
	}
}

553
static int sony_leds_init(struct hid_device *hdev)
554 555
{
	struct sony_sc *drv_data;
J
Jiri Kosina 已提交
556 557 558 559
	int n, ret = 0;
	struct led_classdev *led;
	size_t name_sz;
	char *name;
560 561
	size_t name_len;
	const char *name_fmt;
562 563

	drv_data = hid_get_drvdata(hdev);
564 565 566 567 568 569 570 571 572 573 574 575
	BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT));

	if (drv_data->quirks & BUZZ_CONTROLLER) {
		name_len = strlen("::buzz#");
		name_fmt = "%s::buzz%d";
		/* Validate expected report characteristics. */
		if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 7))
			return -ENODEV;
	} else {
		name_len = strlen("::sony#");
		name_fmt = "%s::sony%d";
	}
576

577 578 579
	/* Clear LEDs as we have no way of reading their initial state. This is
	 * only relevant if the driver is loaded after somebody actively set the
	 * LEDs to on */
580
	sony_set_leds(hdev, 0x00);
581

582
	name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1;
583

J
Jiri Kosina 已提交
584 585 586 587
	for (n = 0; n < 4; n++) {
		led = kzalloc(sizeof(struct led_classdev) + name_sz, GFP_KERNEL);
		if (!led) {
			hid_err(hdev, "Couldn't allocate memory for LED %d\n", n);
J
Julia Lawall 已提交
588
			ret = -ENOMEM;
J
Jiri Kosina 已提交
589 590
			goto error_leds;
		}
591

J
Jiri Kosina 已提交
592
		name = (void *)(&led[1]);
593
		snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev), n + 1);
J
Jiri Kosina 已提交
594 595 596
		led->name = name;
		led->brightness = 0;
		led->max_brightness = 1;
597 598
		led->brightness_get = sony_led_get_brightness;
		led->brightness_set = sony_led_set_brightness;
599

J
Julia Lawall 已提交
600 601
		ret = led_classdev_register(&hdev->dev, led);
		if (ret) {
J
Jiri Kosina 已提交
602 603 604
			hid_err(hdev, "Failed to register LED %d\n", n);
			kfree(led);
			goto error_leds;
605
		}
J
Jiri Kosina 已提交
606

607
		drv_data->leds[n] = led;
608 609 610 611 612
	}

	return ret;

error_leds:
613
	sony_leds_remove(hdev);
614 615 616 617

	return ret;
}

618
static void sony_state_worker(struct work_struct *work)
619
{
620
	struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
621 622 623
	unsigned char buf[] = {
		0x01,
		0x00, 0xff, 0x00, 0xff, 0x00,
624
		0x00, 0x00, 0x00, 0x00, 0x00,
625 626 627 628 629 630
		0xff, 0x27, 0x10, 0x00, 0x32,
		0xff, 0x27, 0x10, 0x00, 0x32,
		0xff, 0x27, 0x10, 0x00, 0x32,
		0xff, 0x27, 0x10, 0x00, 0x32,
		0x00, 0x00, 0x00, 0x00, 0x00
	};
631

632
#ifdef CONFIG_SONY_FF
633 634
	buf[3] = sc->right;
	buf[5] = sc->left;
635 636 637
#endif

	buf[10] |= (sc->led_state & 0xf) << 1;
638 639 640 641 642

	sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf),
					HID_OUTPUT_REPORT);
}

643
#ifdef CONFIG_SONY_FF
644 645 646
static int sony_play_effect(struct input_dev *dev, void *data,
			    struct ff_effect *effect)
{
647
	struct hid_device *hid = input_get_drvdata(dev);
648
	struct sony_sc *sc = hid_get_drvdata(hid);
649 650 651 652

	if (effect->type != FF_RUMBLE)
		return 0;

653 654
	sc->left = effect->u.rumble.strong_magnitude / 256;
	sc->right = effect->u.rumble.weak_magnitude ? 1 : 0;
655

656
	schedule_work(&sc->state_worker);
657
	return 0;
658 659 660 661 662 663 664 665 666 667 668 669
}

static int sony_init_ff(struct hid_device *hdev)
{
	struct hid_input *hidinput = list_entry(hdev->inputs.next,
						struct hid_input, list);
	struct input_dev *input_dev = hidinput->input;

	input_set_capability(input_dev, EV_FF, FF_RUMBLE);
	return input_ff_create_memless(input_dev, NULL, sony_play_effect);
}

670 671 672 673
static void sony_destroy_ff(struct hid_device *hdev)
{
	struct sony_sc *sc = hid_get_drvdata(hdev);

674
	cancel_work_sync(&sc->state_worker);
675 676
}

677 678 679 680 681
#else
static int sony_init_ff(struct hid_device *hdev)
{
	return 0;
}
682 683 684 685

static void sony_destroy_ff(struct hid_device *hdev)
{
}
686 687
#endif

J
Jiri Slaby 已提交
688 689 690
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
	int ret;
691 692
	unsigned long quirks = id->driver_data;
	struct sony_sc *sc;
693
	unsigned int connect_mask = HID_CONNECT_DEFAULT;
694

695
	sc = devm_kzalloc(&hdev->dev, sizeof(*sc), GFP_KERNEL);
696
	if (sc == NULL) {
697
		hid_err(hdev, "can't alloc sony descriptor\n");
698 699 700 701 702
		return -ENOMEM;
	}

	sc->quirks = quirks;
	hid_set_drvdata(hdev, sc);
703
	sc->hdev = hdev;
J
Jiri Slaby 已提交
704 705 706

	ret = hid_parse(hdev);
	if (ret) {
707
		hid_err(hdev, "parse failed\n");
708
		return ret;
J
Jiri Slaby 已提交
709 710
	}

711 712 713 714 715 716 717 718
	if (sc->quirks & VAIO_RDESC_CONSTANT)
		connect_mask |= HID_CONNECT_HIDDEV_FORCE;
	else if (sc->quirks & SIXAXIS_CONTROLLER_USB)
		connect_mask |= HID_CONNECT_HIDDEV_FORCE;
	else if (sc->quirks & SIXAXIS_CONTROLLER_BT)
		connect_mask |= HID_CONNECT_HIDDEV_FORCE;

	ret = hid_hw_start(hdev, connect_mask);
J
Jiri Slaby 已提交
719
	if (ret) {
720
		hid_err(hdev, "hw start failed\n");
721
		return ret;
J
Jiri Slaby 已提交
722 723
	}

724 725
	if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
		hdev->hid_output_raw_report = sixaxis_usb_output_raw_report;
726
		ret = sixaxis_set_operational_usb(hdev);
727
		INIT_WORK(&sc->state_worker, sony_state_worker);
728
	}
729 730 731
	else if (sc->quirks & SIXAXIS_CONTROLLER_BT)
		ret = sixaxis_set_operational_bt(hdev);
	else
732 733
		ret = 0;

734
	if (ret < 0)
J
Jiri Slaby 已提交
735 736
		goto err_stop;

737 738 739 740 741 742
	if (sc->quirks & SONY_LED_SUPPORT) {
		ret = sony_leds_init(hdev);
		if (ret < 0)
			goto err_stop;
	}

743 744 745 746
	ret = sony_init_ff(hdev);
	if (ret < 0)
		goto err_stop;

J
Jiri Slaby 已提交
747 748
	return 0;
err_stop:
749 750
	if (sc->quirks & SONY_LED_SUPPORT)
		sony_leds_remove(hdev);
J
Jiri Slaby 已提交
751 752 753 754
	hid_hw_stop(hdev);
	return ret;
}

755 756
static void sony_remove(struct hid_device *hdev)
{
757 758
	struct sony_sc *sc = hid_get_drvdata(hdev);

759
	if (sc->quirks & SONY_LED_SUPPORT)
760
		sony_leds_remove(hdev);
761

762 763
	sony_destroy_ff(hdev);

764 765 766
	hid_hw_stop(hdev);
}

J
Jiri Slaby 已提交
767
static const struct hid_device_id sony_devices[] = {
768 769
	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
		.driver_data = SIXAXIS_CONTROLLER_USB },
770 771
	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER),
		.driver_data = SIXAXIS_CONTROLLER_USB },
772 773
	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
		.driver_data = SIXAXIS_CONTROLLER_BT },
774 775
	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
		.driver_data = VAIO_RDESC_CONSTANT },
776 777
	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE),
		.driver_data = VAIO_RDESC_CONSTANT },
778 779 780 781 782 783
	/* Wired Buzz Controller. Reported as Sony Hub from its USB ID and as
	 * Logitech joystick from the device descriptor. */
	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER),
		.driver_data = BUZZ_CONTROLLER },
	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER),
		.driver_data = BUZZ_CONTROLLER },
784 785 786 787 788 789
	/* PS3 BD Remote Control */
	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE),
		.driver_data = PS3REMOTE },
	/* Logitech Harmony Adapter for PS3 */
	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3),
		.driver_data = PS3REMOTE },
J
Jiri Slaby 已提交
790 791 792 793 794
	{ }
};
MODULE_DEVICE_TABLE(hid, sony_devices);

static struct hid_driver sony_driver = {
795 796 797 798 799 800 801
	.name          = "sony",
	.id_table      = sony_devices,
	.input_mapping = sony_mapping,
	.probe         = sony_probe,
	.remove        = sony_remove,
	.report_fixup  = sony_report_fixup,
	.raw_event     = sony_raw_event
J
Jiri Slaby 已提交
802
};
803
module_hid_driver(sony_driver);
J
Jiri Slaby 已提交
804 805

MODULE_LICENSE("GPL");