sdhci-esdhc-imx.c 15.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
/*
 * Freescale eSDHC i.MX controller driver for the platform bus.
 *
 * derived from the OF-version.
 *
 * Copyright (c) 2010 Pengutronix e.K.
 *   Author: Wolfram Sang <w.sang@pengutronix.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License.
 */

#include <linux/io.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
18
#include <linux/gpio.h>
19
#include <linux/module.h>
20
#include <linux/slab.h>
21
#include <linux/mmc/host.h>
22 23
#include <linux/mmc/mmc.h>
#include <linux/mmc/sdio.h>
24
#include <linux/mmc/slot-gpio.h>
25 26 27
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
28
#include <linux/pinctrl/consumer.h>
29
#include <linux/platform_data/mmc-esdhc-imx.h>
30 31 32
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"

33
#define	ESDHC_CTRL_D3CD			0x08
34
/* VENDOR SPEC register */
35 36 37 38
#define ESDHC_VENDOR_SPEC		0xc0
#define  ESDHC_VENDOR_SPEC_SDIO_QUIRK	(1 << 1)
#define ESDHC_WTMK_LVL			0x44
#define ESDHC_MIX_CTRL			0x48
39

R
Richard Zhu 已提交
40 41 42 43 44 45
/*
 * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
 * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
 * but bit28 is used as the INT DMA ERR in fsl eSDHC design.
 * Define this macro DMA error INT for fsl eSDHC
 */
46
#define ESDHC_INT_VENDOR_SPEC_DMA_ERR	(1 << 28)
R
Richard Zhu 已提交
47

48 49 50 51 52 53 54 55 56 57 58 59
/*
 * The CMDTYPE of the CMD register (offset 0xE) should be set to
 * "11" when the STOP CMD12 is issued on imx53 to abort one
 * open ended multi-blk IO. Otherwise the TC INT wouldn't
 * be generated.
 * In exact block transfer, the controller doesn't complete the
 * operations automatically as required at the end of the
 * transfer and remains on hold if the abort command is not sent.
 * As a result, the TC flag is not asserted and SW  received timeout
 * exeception. Bit1 of Vendor Spec registor is used to fix it.
 */
#define ESDHC_FLAG_MULTIBLK_NO_INT	(1 << 1)
60

61 62 63 64 65
enum imx_esdhc_type {
	IMX25_ESDHC,
	IMX35_ESDHC,
	IMX51_ESDHC,
	IMX53_ESDHC,
66
	IMX6Q_USDHC,
67 68
};

69 70 71
struct pltfm_imx_data {
	int flags;
	u32 scratchpad;
72
	enum imx_esdhc_type devtype;
73
	struct pinctrl *pinctrl;
74
	struct esdhc_platform_data boarddata;
75 76 77
	struct clk *clk_ipg;
	struct clk *clk_ahb;
	struct clk *clk_per;
78 79
};

80 81 82 83 84 85 86 87 88 89 90 91 92
static struct platform_device_id imx_esdhc_devtype[] = {
	{
		.name = "sdhci-esdhc-imx25",
		.driver_data = IMX25_ESDHC,
	}, {
		.name = "sdhci-esdhc-imx35",
		.driver_data = IMX35_ESDHC,
	}, {
		.name = "sdhci-esdhc-imx51",
		.driver_data = IMX51_ESDHC,
	}, {
		.name = "sdhci-esdhc-imx53",
		.driver_data = IMX53_ESDHC,
93 94 95
	}, {
		.name = "sdhci-usdhc-imx6q",
		.driver_data = IMX6Q_USDHC,
96 97 98 99 100 101
	}, {
		/* sentinel */
	}
};
MODULE_DEVICE_TABLE(platform, imx_esdhc_devtype);

102 103 104 105 106
static const struct of_device_id imx_esdhc_dt_ids[] = {
	{ .compatible = "fsl,imx25-esdhc", .data = &imx_esdhc_devtype[IMX25_ESDHC], },
	{ .compatible = "fsl,imx35-esdhc", .data = &imx_esdhc_devtype[IMX35_ESDHC], },
	{ .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], },
	{ .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], },
107
	{ .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], },
108 109 110 111
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);

112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131
static inline int is_imx25_esdhc(struct pltfm_imx_data *data)
{
	return data->devtype == IMX25_ESDHC;
}

static inline int is_imx35_esdhc(struct pltfm_imx_data *data)
{
	return data->devtype == IMX35_ESDHC;
}

static inline int is_imx51_esdhc(struct pltfm_imx_data *data)
{
	return data->devtype == IMX51_ESDHC;
}

static inline int is_imx53_esdhc(struct pltfm_imx_data *data)
{
	return data->devtype == IMX53_ESDHC;
}

132 133 134 135 136
static inline int is_imx6q_usdhc(struct pltfm_imx_data *data)
{
	return data->devtype == IMX6Q_USDHC;
}

137 138 139 140 141 142 143 144
static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
{
	void __iomem *base = host->ioaddr + (reg & ~0x3);
	u32 shift = (reg & 0x3) * 8;

	writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
}

145 146 147 148
static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
{
	u32 val = readl(host->ioaddr + reg);

R
Richard Zhu 已提交
149 150 151 152 153 154 155 156 157 158 159 160 161 162 163
	if (unlikely(reg == SDHCI_CAPABILITIES)) {
		/* In FSL esdhc IC module, only bit20 is used to indicate the
		 * ADMA2 capability of esdhc, but this bit is messed up on
		 * some SOCs (e.g. on MX25, MX35 this bit is set, but they
		 * don't actually support ADMA2). So set the BROKEN_ADMA
		 * uirk on MX25/35 platforms.
		 */

		if (val & SDHCI_CAN_DO_ADMA1) {
			val &= ~SDHCI_CAN_DO_ADMA1;
			val |= SDHCI_CAN_DO_ADMA2;
		}
	}

	if (unlikely(reg == SDHCI_INT_STATUS)) {
164 165
		if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) {
			val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR;
R
Richard Zhu 已提交
166 167 168 169
			val |= SDHCI_INT_ADMA_ERROR;
		}
	}

170 171 172 173 174
	return val;
}

static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
{
175 176
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct pltfm_imx_data *imx_data = pltfm_host->priv;
177 178 179 180 181 182 183 184 185 186 187 188 189
	u32 data;

	if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
		if (val & SDHCI_INT_CARD_INT) {
			/*
			 * Clear and then set D3CD bit to avoid missing the
			 * card interrupt.  This is a eSDHC controller problem
			 * so we need to apply the following workaround: clear
			 * and set D3CD bit will make eSDHC re-sample the card
			 * interrupt. In case a card interrupt was lost,
			 * re-sample it by the following steps.
			 */
			data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
190
			data &= ~ESDHC_CTRL_D3CD;
191
			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
192
			data |= ESDHC_CTRL_D3CD;
193 194 195
			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
		}
	}
196

197 198 199 200
	if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
				&& (reg == SDHCI_INT_STATUS)
				&& (val & SDHCI_INT_DATA_END))) {
			u32 v;
201 202 203
			v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
			v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK;
			writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
204 205
	}

R
Richard Zhu 已提交
206 207 208
	if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
		if (val & SDHCI_INT_ADMA_ERROR) {
			val &= ~SDHCI_INT_ADMA_ERROR;
209
			val |= ESDHC_INT_VENDOR_SPEC_DMA_ERR;
R
Richard Zhu 已提交
210 211 212
		}
	}

213 214 215
	writel(val, host->ioaddr + reg);
}

216 217
static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
{
218 219 220
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct pltfm_imx_data *imx_data = pltfm_host->priv;

221
	if (unlikely(reg == SDHCI_HOST_VERSION)) {
222 223 224 225 226 227 228 229
		reg ^= 2;
		if (is_imx6q_usdhc(imx_data)) {
			/*
			 * The usdhc register returns a wrong host version.
			 * Correct it here.
			 */
			return SDHCI_SPEC_300;
		}
230
	}
231 232 233 234 235 236 237

	return readw(host->ioaddr + reg);
}

static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
238
	struct pltfm_imx_data *imx_data = pltfm_host->priv;
239 240 241 242 243 244 245

	switch (reg) {
	case SDHCI_TRANSFER_MODE:
		/*
		 * Postpone this write, we must do it together with a
		 * command write that is down below.
		 */
246 247 248 249 250
		if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
				&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
				&& (host->cmd->data->blocks > 1)
				&& (host->cmd->data->flags & MMC_DATA_READ)) {
			u32 v;
251 252 253
			v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
			v |= ESDHC_VENDOR_SPEC_SDIO_QUIRK;
			writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
254
		}
255
		imx_data->scratchpad = val;
256 257
		return;
	case SDHCI_COMMAND:
258 259 260
		if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
		     host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
	            (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
261
			val |= SDHCI_CMD_ABORTCMD;
262 263

		if (is_imx6q_usdhc(imx_data)) {
264
			u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
265
			m = imx_data->scratchpad | (m & 0xffff0000);
266
			writel(m, host->ioaddr + ESDHC_MIX_CTRL);
267 268 269 270 271 272
			writel(val << 16,
			       host->ioaddr + SDHCI_TRANSFER_MODE);
		} else {
			writel(val << 16 | imx_data->scratchpad,
			       host->ioaddr + SDHCI_TRANSFER_MODE);
		}
273 274 275 276 277 278 279 280 281 282
		return;
	case SDHCI_BLOCK_SIZE:
		val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
		break;
	}
	esdhc_clrset_le(host, 0xffff, val, reg);
}

static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
{
283 284
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct pltfm_imx_data *imx_data = pltfm_host->priv;
285 286 287 288 289 290 291 292 293 294
	u32 new_val;

	switch (reg) {
	case SDHCI_POWER_CONTROL:
		/*
		 * FSL put some DMA bits here
		 * If your board has a regulator, code should be here
		 */
		return;
	case SDHCI_HOST_CONTROL:
295 296
		/* FSL messed up here, so we need to manually compose it. */
		new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
M
Masanari Iida 已提交
297
		/* ensure the endianness */
298
		new_val |= ESDHC_HOST_CONTROL_LE;
299 300 301 302 303
		/* bits 8&9 are reserved on mx25 */
		if (!is_imx25_esdhc(imx_data)) {
			/* DMA mode bits are shifted */
			new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
		}
304 305 306 307 308

		esdhc_clrset_le(host, 0xffff, new_val, reg);
		return;
	}
	esdhc_clrset_le(host, 0xff, val, reg);
309 310 311 312 313 314 315 316 317 318 319

	/*
	 * The esdhc has a design violation to SDHC spec which tells
	 * that software reset should not affect card detection circuit.
	 * But esdhc clears its SYSCTL register bits [0..2] during the
	 * software reset.  This will stop those clocks that card detection
	 * circuit relies on.  To work around it, we turn the clocks on back
	 * to keep card detection circuit functional.
	 */
	if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1))
		esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL);
320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335
}

static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);

	return clk_get_rate(pltfm_host->clk);
}

static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);

	return clk_get_rate(pltfm_host->clk) / 256 / 16;
}

336 337
static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
{
338 339 340
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct pltfm_imx_data *imx_data = pltfm_host->priv;
	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
341 342 343

	switch (boarddata->wp_type) {
	case ESDHC_WP_GPIO:
344
		return mmc_gpio_get_ro(host->mmc);
345 346 347 348 349 350 351 352 353 354
	case ESDHC_WP_CONTROLLER:
		return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
			       SDHCI_WRITE_PROTECT);
	case ESDHC_WP_NONE:
		break;
	}

	return -ENOSYS;
}

355
static struct sdhci_ops sdhci_esdhc_ops = {
356
	.read_l = esdhc_readl_le,
357
	.read_w = esdhc_readw_le,
358
	.write_l = esdhc_writel_le,
359 360 361 362 363
	.write_w = esdhc_writew_le,
	.write_b = esdhc_writeb_le,
	.set_clock = esdhc_set_clock,
	.get_max_clock = esdhc_pltfm_get_max_clock,
	.get_min_clock = esdhc_pltfm_get_min_clock,
364
	.get_ro = esdhc_pltfm_get_ro,
365 366
};

367
static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
R
Richard Zhu 已提交
368 369 370
	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT
			| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
			| SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC
371 372 373 374
			| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
	.ops = &sdhci_esdhc_ops,
};

375
#ifdef CONFIG_OF
B
Bill Pemberton 已提交
376
static int
377 378 379 380 381 382 383 384
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
			 struct esdhc_platform_data *boarddata)
{
	struct device_node *np = pdev->dev.of_node;

	if (!np)
		return -ENODEV;

A
Arnd Bergmann 已提交
385
	if (of_get_property(np, "non-removable", NULL))
386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412
		boarddata->cd_type = ESDHC_CD_PERMANENT;

	if (of_get_property(np, "fsl,cd-controller", NULL))
		boarddata->cd_type = ESDHC_CD_CONTROLLER;

	if (of_get_property(np, "fsl,wp-controller", NULL))
		boarddata->wp_type = ESDHC_WP_CONTROLLER;

	boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
	if (gpio_is_valid(boarddata->cd_gpio))
		boarddata->cd_type = ESDHC_CD_GPIO;

	boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
	if (gpio_is_valid(boarddata->wp_gpio))
		boarddata->wp_type = ESDHC_WP_GPIO;

	return 0;
}
#else
static inline int
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
			 struct esdhc_platform_data *boarddata)
{
	return -ENODEV;
}
#endif

B
Bill Pemberton 已提交
413
static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
414
{
415 416
	const struct of_device_id *of_id =
			of_match_device(imx_esdhc_dt_ids, &pdev->dev);
417 418 419
	struct sdhci_pltfm_host *pltfm_host;
	struct sdhci_host *host;
	struct esdhc_platform_data *boarddata;
420
	int err;
421
	struct pltfm_imx_data *imx_data;
422

423 424 425 426 427 428
	host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata);
	if (IS_ERR(host))
		return PTR_ERR(host);

	pltfm_host = sdhci_priv(host);

429
	imx_data = devm_kzalloc(&pdev->dev, sizeof(*imx_data), GFP_KERNEL);
430 431
	if (!imx_data) {
		err = -ENOMEM;
432
		goto free_sdhci;
433
	}
434

435 436
	if (of_id)
		pdev->id_entry = of_id->data;
437
	imx_data->devtype = pdev->id_entry->driver_data;
438 439
	pltfm_host->priv = imx_data;

440 441 442
	imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
	if (IS_ERR(imx_data->clk_ipg)) {
		err = PTR_ERR(imx_data->clk_ipg);
443
		goto free_sdhci;
444
	}
445 446 447 448

	imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
	if (IS_ERR(imx_data->clk_ahb)) {
		err = PTR_ERR(imx_data->clk_ahb);
449
		goto free_sdhci;
450 451 452 453 454
	}

	imx_data->clk_per = devm_clk_get(&pdev->dev, "per");
	if (IS_ERR(imx_data->clk_per)) {
		err = PTR_ERR(imx_data->clk_per);
455
		goto free_sdhci;
456 457 458 459 460 461 462
	}

	pltfm_host->clk = imx_data->clk_per;

	clk_prepare_enable(imx_data->clk_per);
	clk_prepare_enable(imx_data->clk_ipg);
	clk_prepare_enable(imx_data->clk_ahb);
463

464 465 466
	imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
	if (IS_ERR(imx_data->pinctrl)) {
		err = PTR_ERR(imx_data->pinctrl);
467
		goto disable_clk;
468 469
	}

470
	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
471

472
	if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
473
		/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
R
Richard Zhu 已提交
474 475
		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
			| SDHCI_QUIRK_BROKEN_ADMA;
476

477
	if (is_imx53_esdhc(imx_data))
478 479
		imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;

480 481 482 483 484
	/*
	 * The imx6q ROM code will change the default watermark level setting
	 * to something insane.  Change it back here.
	 */
	if (is_imx6q_usdhc(imx_data))
485
		writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL);
486

487
	boarddata = &imx_data->boarddata;
488 489 490 491
	if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
		if (!host->mmc->parent->platform_data) {
			dev_err(mmc_dev(host->mmc), "no board data!\n");
			err = -EINVAL;
492
			goto disable_clk;
493 494 495 496
		}
		imx_data->boarddata = *((struct esdhc_platform_data *)
					host->mmc->parent->platform_data);
	}
497 498 499

	/* write_protect */
	if (boarddata->wp_type == ESDHC_WP_GPIO) {
500
		err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
501
		if (err) {
502 503 504
			dev_err(mmc_dev(host->mmc),
				"failed to request write-protect gpio!\n");
			goto disable_clk;
505
		}
506
		host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
507 508 509 510 511
	}

	/* card_detect */
	switch (boarddata->cd_type) {
	case ESDHC_CD_GPIO:
512
		err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio);
513
		if (err) {
514
			dev_err(mmc_dev(host->mmc),
515
				"failed to request card-detect gpio!\n");
516
			goto disable_clk;
517
		}
518
		/* fall through */
519

520 521
	case ESDHC_CD_CONTROLLER:
		/* we have a working card_detect back */
522
		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
523 524 525 526 527 528 529 530
		break;

	case ESDHC_CD_PERMANENT:
		host->mmc->caps = MMC_CAP_NONREMOVABLE;
		break;

	case ESDHC_CD_NONE:
		break;
531
	}
532

533 534
	err = sdhci_add_host(host);
	if (err)
535
		goto disable_clk;
536

537
	return 0;
538

539
disable_clk:
540 541 542
	clk_disable_unprepare(imx_data->clk_per);
	clk_disable_unprepare(imx_data->clk_ipg);
	clk_disable_unprepare(imx_data->clk_ahb);
543
free_sdhci:
544 545
	sdhci_pltfm_free(pdev);
	return err;
546 547
}

B
Bill Pemberton 已提交
548
static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
549
{
550
	struct sdhci_host *host = platform_get_drvdata(pdev);
551
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
552
	struct pltfm_imx_data *imx_data = pltfm_host->priv;
553 554 555
	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);

	sdhci_remove_host(host, dead);
556

557 558 559 560
	clk_disable_unprepare(imx_data->clk_per);
	clk_disable_unprepare(imx_data->clk_ipg);
	clk_disable_unprepare(imx_data->clk_ahb);

561 562 563
	sdhci_pltfm_free(pdev);

	return 0;
564 565
}

566 567 568 569
static struct platform_driver sdhci_esdhc_imx_driver = {
	.driver		= {
		.name	= "sdhci-esdhc-imx",
		.owner	= THIS_MODULE,
570
		.of_match_table = imx_esdhc_dt_ids,
571
		.pm	= SDHCI_PLTFM_PMOPS,
572
	},
573
	.id_table	= imx_esdhc_devtype,
574
	.probe		= sdhci_esdhc_imx_probe,
B
Bill Pemberton 已提交
575
	.remove		= sdhci_esdhc_imx_remove,
576
};
577

578
module_platform_driver(sdhci_esdhc_imx_driver);
579 580 581 582

MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
MODULE_LICENSE("GPL v2");