setup_64.c 16.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
/*
 * 
 * Common boot and setup code.
 *
 * Copyright (C) 2001 PPC64 Team, IBM Corp
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 */

#undef DEBUG

#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/utsname.h>
#include <linux/tty.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/unistd.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
34
#include <linux/bootmem.h>
35
#include <linux/pci.h>
36
#include <linux/lockdep.h>
Y
Yinghai Lu 已提交
37
#include <linux/memblock.h>
38
#include <asm/io.h>
39
#include <asm/kdump.h>
40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/machdep.h>
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/btext.h>
#include <asm/nvram.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/firmware.h>
P
Paul Mackerras 已提交
61
#include <asm/xmon.h>
D
David Gibson 已提交
62
#include <asm/udbg.h>
63
#include <asm/kexec.h>
64
#include <asm/mmu_context.h>
65

S
Stephen Rothwell 已提交
66 67
#include "setup.h"

68 69 70 71 72 73 74 75 76
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif

int boot_cpuid = 0;
u64 ppc64_pft_size;

77 78 79 80
/* Pick defaults since we might want to patch instructions
 * before we've read this from the device tree.
 */
struct ppc64_caches ppc64_caches = {
81 82 83 84
	.dline_size = 0x40,
	.log_dline_size = 6,
	.iline_size = 0x40,
	.log_iline_size = 6
85
};
86 87 88 89 90 91 92 93 94 95 96 97
EXPORT_SYMBOL_GPL(ppc64_caches);

/*
 * These are used in binfmt_elf.c to put aux entries on the stack
 * for each elf executable being started.
 */
int dcache_bsize;
int icache_bsize;
int ucache_bsize;

#ifdef CONFIG_SMP

98
static char *smt_enabled_cmdline;
99 100 101 102 103

/* Look for ibm,smt-enabled OF option */
static void check_smt_enabled(void)
{
	struct device_node *dn;
104
	const char *smt_option;
105

106 107
	/* Default to enabling all threads */
	smt_enabled_at_boot = threads_per_core;
108

109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
	/* Allow the command line to overrule the OF option */
	if (smt_enabled_cmdline) {
		if (!strcmp(smt_enabled_cmdline, "on"))
			smt_enabled_at_boot = threads_per_core;
		else if (!strcmp(smt_enabled_cmdline, "off"))
			smt_enabled_at_boot = 0;
		else {
			long smt;
			int rc;

			rc = strict_strtol(smt_enabled_cmdline, 10, &smt);
			if (!rc)
				smt_enabled_at_boot =
					min(threads_per_core, (int)smt);
		}
	} else {
		dn = of_find_node_by_path("/options");
		if (dn) {
			smt_option = of_get_property(dn, "ibm,smt-enabled",
						     NULL);

			if (smt_option) {
				if (!strcmp(smt_option, "on"))
					smt_enabled_at_boot = threads_per_core;
				else if (!strcmp(smt_option, "off"))
					smt_enabled_at_boot = 0;
			}

			of_node_put(dn);
		}
	}
140 141 142 143 144
}

/* Look for smt-enabled= cmdline option */
static int __init early_smt_enabled(char *p)
{
145
	smt_enabled_cmdline = p;
146 147 148 149
	return 0;
}
early_param("smt-enabled", early_smt_enabled);

P
Paul Mackerras 已提交
150 151
#else
#define check_smt_enabled()
152 153 154 155 156 157 158 159
#endif /* CONFIG_SMP */

/*
 * Early initialization entry point. This is called by head.S
 * with MMU translation disabled. We rely on the "feature" of
 * the CPU that ignores the top 2 bits of the address in real
 * mode so we can access kernel globals normally provided we
 * only toy with things in the RMO region. From here, we do
Y
Yinghai Lu 已提交
160
 * some early parsing of the device-tree to setup out MEMBLOCK
161 162 163 164 165 166 167 168 169 170 171 172 173 174
 * data structures, and allocate & initialize the hash table
 * and segment tables so we can start running with translation
 * enabled.
 *
 * It is this function which will call the probe() callback of
 * the various platform types and copy the matching one to the
 * global ppc_md structure. Your platform can eventually do
 * some very early initializations from the probe() routine, but
 * this is not recommended, be very careful as, for example, the
 * device-tree is not accessible via normal means at this point.
 */

void __init early_setup(unsigned long dt_ptr)
{
175 176
	/* -------- printk is _NOT_ safe to use here ! ------- */

177
	/* Identify CPU type */
178
	identify_cpu(0, mfspr(SPRN_PVR));
179

180
	/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
181 182
	initialise_paca(&boot_paca, 0);
	setup_paca(&boot_paca);
183

184 185 186
	/* Initialize lockdep early or else spinlocks will blow */
	lockdep_init();

187 188
	/* -------- printk is now safe to use ------- */

189 190 191
	/* Enable early debugging if any specified (see udbg.h) */
	udbg_early_init();

192
 	DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
193 194

	/*
195 196 197
	 * Do early initialization using the flattened device
	 * tree, such as retrieving the physical memory map or
	 * calculating/retrieving the hash table size.
198 199 200
	 */
	early_init_devtree(__va(dt_ptr));

201
	/* Now we know the logical id of our boot cpu, setup the paca. */
202
	setup_paca(&paca[boot_cpuid]);
203 204 205 206

	/* Fix up paca fields required for the boot cpu */
	get_paca()->cpu_start = 1;

207 208
	/* Probe the machine type */
	probe_machine();
209

210
	setup_kdump_trampoline();
211

212 213
	DBG("Found, Initializing memory management...\n");

214 215
	/* Initialize the hash table or TLB handling */
	early_init_mmu();
216 217 218 219

	DBG(" <- early_setup()\n");
}

220 221 222
#ifdef CONFIG_SMP
void early_setup_secondary(void)
{
223
	/* Mark interrupts enabled in PACA */
224
	get_paca()->soft_enabled = 0;
225

226 227
	/* Initialize the hash table or TLB handling */
	early_init_mmu_secondary();
228 229 230
}

#endif /* CONFIG_SMP */
231

232 233 234
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
void smp_release_cpus(void)
{
235
	unsigned long *ptr;
236 237 238 239 240 241 242

	DBG(" -> smp_release_cpus()\n");

	/* All secondary cpus are spinning on a common spinloop, release them
	 * all now so they can start to spin on their individual paca
	 * spinloops. For non SMP kernels, the secondary cpus never get out
	 * of the common spinloop.
243
	 */
244

245 246
	ptr  = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
			- PHYSICAL_START);
247
	*ptr = __pa(generic_secondary_smp_init);
248 249 250 251 252 253
	mb();

	DBG(" <- smp_release_cpus()\n");
}
#endif /* CONFIG_SMP || CONFIG_KEXEC */

254
/*
255 256
 * Initialize some remaining members of the ppc64_caches and systemcfg
 * structures
257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275
 * (at least until we get rid of them completely). This is mostly some
 * cache informations about the CPU that will be used by cache flush
 * routines and/or provided to userland
 */
static void __init initialize_cache_info(void)
{
	struct device_node *np;
	unsigned long num_cpus = 0;

	DBG(" -> initialize_cache_info()\n");

	for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
		num_cpus += 1;

		/* We're assuming *all* of the CPUs have the same
		 * d-cache and i-cache sizes... -Peter
		 */

		if ( num_cpus == 1 ) {
276
			const u32 *sizep, *lsizep;
277 278 279 280
			u32 size, lsize;

			size = 0;
			lsize = cur_cpu_spec->dcache_bsize;
281
			sizep = of_get_property(np, "d-cache-size", NULL);
282 283
			if (sizep != NULL)
				size = *sizep;
284 285 286 287
			lsizep = of_get_property(np, "d-cache-block-size", NULL);
			/* fallback if block size missing */
			if (lsizep == NULL)
				lsizep = of_get_property(np, "d-cache-line-size", NULL);
288 289 290 291 292 293
			if (lsizep != NULL)
				lsize = *lsizep;
			if (sizep == 0 || lsizep == 0)
				DBG("Argh, can't find dcache properties ! "
				    "sizep: %p, lsizep: %p\n", sizep, lsizep);

294 295
			ppc64_caches.dsize = size;
			ppc64_caches.dline_size = lsize;
296 297 298 299 300
			ppc64_caches.log_dline_size = __ilog2(lsize);
			ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;

			size = 0;
			lsize = cur_cpu_spec->icache_bsize;
301
			sizep = of_get_property(np, "i-cache-size", NULL);
302 303
			if (sizep != NULL)
				size = *sizep;
304 305 306
			lsizep = of_get_property(np, "i-cache-block-size", NULL);
			if (lsizep == NULL)
				lsizep = of_get_property(np, "i-cache-line-size", NULL);
307 308 309 310 311 312
			if (lsizep != NULL)
				lsize = *lsizep;
			if (sizep == 0 || lsizep == 0)
				DBG("Argh, can't find icache properties ! "
				    "sizep: %p, lsizep: %p\n", sizep, lsizep);

313 314
			ppc64_caches.isize = size;
			ppc64_caches.iline_size = lsize;
315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331
			ppc64_caches.log_iline_size = __ilog2(lsize);
			ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
		}
	}

	DBG(" <- initialize_cache_info()\n");
}


/*
 * Do some initial setup of the system.  The parameters are those which 
 * were passed in from the bootloader.
 */
void __init setup_system(void)
{
	DBG(" -> setup_system()\n");

332 333
	/* Apply the CPUs-specific and firmware specific fixups to kernel
	 * text (nop out sections not relevant to this CPU or this firmware)
334
	 */
335
	do_feature_fixups(cur_cpu_spec->cpu_features,
336
			  &__start___ftr_fixup, &__stop___ftr_fixup);
337 338
	do_feature_fixups(cur_cpu_spec->mmu_features,
			  &__start___mmu_ftr_fixup, &__stop___mmu_ftr_fixup);
339 340
	do_feature_fixups(powerpc_firmware_features,
			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
K
Kumar Gala 已提交
341 342
	do_lwsync_fixups(cur_cpu_spec->cpu_features,
			 &__start___lwsync_fixup, &__stop___lwsync_fixup);
343

344 345 346 347 348 349 350
	/*
	 * Unflatten the device-tree passed by prom_init or kexec
	 */
	unflatten_device_tree();

	/*
	 * Fill the ppc64_caches & systemcfg structures with informations
351
 	 * retrieved from the device-tree.
352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371
	 */
	initialize_cache_info();

#ifdef CONFIG_PPC_RTAS
	/*
	 * Initialize RTAS if available
	 */
	rtas_initialize();
#endif /* CONFIG_PPC_RTAS */

	/*
	 * Check if we have an initrd provided via the device-tree
	 */
	check_for_initrd();

	/*
	 * Do some platform specific early initializations, that includes
	 * setting up the hash table pointers. It also sets up some interrupt-mapping
	 * related options that will be used by finish_device_tree()
	 */
372 373
	if (ppc_md.init_early)
		ppc_md.init_early();
374

375 376 377 378 379 380 381
 	/*
	 * We can discover serial ports now since the above did setup the
	 * hash table management for us, thus ioremap works. We do that early
	 * so that further code can be debugged
	 */
	find_legacy_serial_ports();

382 383 384 385 386
	/*
	 * Register early console
	 */
	register_early_udbg_console();

387 388 389 390
	/*
	 * Initialize xmon
	 */
	xmon_setup();
391

P
Paul Mackerras 已提交
392
	smp_setup_cpu_maps();
393
	check_smt_enabled();
394

395
#ifdef CONFIG_SMP
396 397 398 399
	/* Release secondary cpus out of their spinloops at 0x60 now that
	 * we can map physical -> logical CPU ids
	 */
	smp_release_cpus();
400
#endif
401

402
	printk("Starting Linux PPC64 %s\n", init_utsname()->version);
403 404

	printk("-----------------------------------------------------\n");
405
	printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
Y
Yinghai Lu 已提交
406
	printk("physicalMemorySize            = 0x%llx\n", memblock_phys_mem_size());
407 408 409 410 411 412
	if (ppc64_caches.dline_size != 0x80)
		printk("ppc64_caches.dcache_line_size = 0x%x\n",
		       ppc64_caches.dline_size);
	if (ppc64_caches.iline_size != 0x80)
		printk("ppc64_caches.icache_line_size = 0x%x\n",
		       ppc64_caches.iline_size);
413
#ifdef CONFIG_PPC_STD_MMU_64
414 415
	if (htab_address)
		printk("htab_address                  = 0x%p\n", htab_address);
416
	printk("htab_hash_mask                = 0x%lx\n", htab_hash_mask);
417
#endif /* CONFIG_PPC_STD_MMU_64 */
418
	if (PHYSICAL_START > 0)
419 420
		printk("physical_start                = 0x%llx\n",
		       (unsigned long long)PHYSICAL_START);
421 422 423 424 425
	printk("-----------------------------------------------------\n");

	DBG(" <- setup_system()\n");
}

426 427 428 429 430 431 432 433
static u64 slb0_limit(void)
{
	if (cpu_has_feature(CPU_FTR_1T_SEGMENT)) {
		return 1UL << SID_SHIFT_1T;
	}
	return 1UL << SID_SHIFT;
}

434 435
static void __init irqstack_early_init(void)
{
436
	u64 limit = slb0_limit();
437 438 439 440 441 442
	unsigned int i;

	/*
	 * interrupt stacks must be under 256MB, we cannot afford to take
	 * SLB misses on them.
	 */
443
	for_each_possible_cpu(i) {
444
		softirq_ctx[i] = (struct thread_info *)
Y
Yinghai Lu 已提交
445
			__va(memblock_alloc_base(THREAD_SIZE,
446
					    THREAD_SIZE, limit));
447
		hardirq_ctx[i] = (struct thread_info *)
Y
Yinghai Lu 已提交
448
			__va(memblock_alloc_base(THREAD_SIZE,
449
					    THREAD_SIZE, limit));
450 451 452
	}
}

453 454 455 456 457 458 459
#ifdef CONFIG_PPC_BOOK3E
static void __init exc_lvl_early_init(void)
{
	unsigned int i;

	for_each_possible_cpu(i) {
		critirq_ctx[i] = (struct thread_info *)
Y
Yinghai Lu 已提交
460
			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
461
		dbgirq_ctx[i] = (struct thread_info *)
Y
Yinghai Lu 已提交
462
			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
463
		mcheckirq_ctx[i] = (struct thread_info *)
Y
Yinghai Lu 已提交
464
			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
465 466 467 468 469 470
	}
}
#else
#define exc_lvl_early_init()
#endif

471 472 473 474 475 476
/*
 * Stack space used when we detect a bad kernel stack pointer, and
 * early in SMP boots before relocation is enabled.
 */
static void __init emergency_stack_init(void)
{
477
	u64 limit;
478 479 480 481 482 483 484 485 486 487 488
	unsigned int i;

	/*
	 * Emergency stacks must be under 256MB, we cannot afford to take
	 * SLB misses on them. The ABI also requires them to be 128-byte
	 * aligned.
	 *
	 * Since we use these as temporary stacks during secondary CPU
	 * bringup, we need to get at them in real mode. This means they
	 * must also be within the RMO region.
	 */
489
	limit = min(slb0_limit(), ppc64_rma_size);
490

491 492
	for_each_possible_cpu(i) {
		unsigned long sp;
Y
Yinghai Lu 已提交
493
		sp  = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
494 495 496
		sp += THREAD_SIZE;
		paca[i].emergency_sp = __va(sp);
	}
497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521
}

/*
 * Called into from start_kernel, after lock_kernel has been called.
 * Initializes bootmem, which is unsed to manage page allocation until
 * mem_init is called.
 */
void __init setup_arch(char **cmdline_p)
{
	ppc64_boot_msg(0x12, "Setup Arch");

	*cmdline_p = cmd_line;

	/*
	 * Set cache line size based on type of cpu as a default.
	 * Systems with OF can look in the properties on the cpu node(s)
	 * for a possibly more accurate value.
	 */
	dcache_bsize = ppc64_caches.dline_size;
	icache_bsize = ppc64_caches.iline_size;

	/* reboot on panic */
	panic_timeout = 180;

	if (ppc_md.panic)
522
		setup_panic();
523

524
	init_mm.start_code = (unsigned long)_stext;
525 526 527 528 529
	init_mm.end_code = (unsigned long) _etext;
	init_mm.end_data = (unsigned long) _edata;
	init_mm.brk = klimit;
	
	irqstack_early_init();
530
	exc_lvl_early_init();
531 532
	emergency_stack_init();

533
#ifdef CONFIG_PPC_STD_MMU_64
534
	stabs_alloc();
535
#endif
536 537 538 539
	/* set up the bootmem stuff with available memory */
	do_init_bootmem();
	sparse_init();

540 541 542 543
#ifdef CONFIG_DUMMY_CONSOLE
	conswitchp = &dummy_con;
#endif

544 545
	if (ppc_md.setup_arch)
		ppc_md.setup_arch();
546 547

	paging_init();
548 549 550 551

	/* Initialize the MMU context management stuff */
	mmu_context_init();

552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579
	ppc64_boot_msg(0x15, "Setup Done");
}


/* ToDo: do something useful if ppc_md is not yet setup. */
#define PPC64_LINUX_FUNCTION 0x0f000000
#define PPC64_IPL_MESSAGE 0xc0000000
#define PPC64_TERM_MESSAGE 0xb0000000

static void ppc64_do_msg(unsigned int src, const char *msg)
{
	if (ppc_md.progress) {
		char buf[128];

		sprintf(buf, "%08X\n", src);
		ppc_md.progress(buf, 0);
		snprintf(buf, 128, "%s", msg);
		ppc_md.progress(buf, 0);
	}
}

/* Print a boot progress message. */
void ppc64_boot_msg(unsigned int src, const char *msg)
{
	ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg);
	printk("[boot]%04x %s\n", src, msg);
}

580
#ifdef CONFIG_SMP
581 582 583
#define PCPU_DYN_SIZE		()

static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
584
{
585 586 587
	return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align,
				    __pa(MAX_DMA_ADDRESS));
}
588

589 590 591 592
static void __init pcpu_fc_free(void *ptr, size_t size)
{
	free_bootmem(__pa(ptr), size);
}
593

594 595 596 597 598 599 600 601
static int pcpu_cpu_distance(unsigned int from, unsigned int to)
{
	if (cpu_to_node(from) == cpu_to_node(to))
		return LOCAL_DISTANCE;
	else
		return REMOTE_DISTANCE;
}

602 603 604
unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(__per_cpu_offset);

605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628
void __init setup_per_cpu_areas(void)
{
	const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
	size_t atom_size;
	unsigned long delta;
	unsigned int cpu;
	int rc;

	/*
	 * Linear mapping is one of 4K, 1M and 16M.  For 4K, no need
	 * to group units.  For larger mappings, use 1M atom which
	 * should be large enough to contain a number of units.
	 */
	if (mmu_linear_psize == MMU_PAGE_4K)
		atom_size = PAGE_SIZE;
	else
		atom_size = 1 << 20;

	rc = pcpu_embed_first_chunk(0, dyn_size, atom_size, pcpu_cpu_distance,
				    pcpu_fc_alloc, pcpu_fc_free);
	if (rc < 0)
		panic("cannot initialize percpu area (err=%d)", rc);

	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
629 630 631 632
	for_each_possible_cpu(cpu) {
                __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
		paca[cpu].data_offset = __per_cpu_offset[cpu];
	}
633 634
}
#endif
635 636 637 638 639 640 641


#ifdef CONFIG_PPC_INDIRECT_IO
struct ppc_pci_io ppc_pci_io;
EXPORT_SYMBOL(ppc_pci_io);
#endif /* CONFIG_PPC_INDIRECT_IO */