tpm_infineon.c 16.1 KB
Newer Older
1 2 3
/*
 * Description:
 * Device Driver for the Infineon Technologies
4
 * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module
5 6
 * Specifications at www.trustedcomputinggroup.org
 *
7
 * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com>
8
 * Sirrix AG - security technologies, http://www.sirrix.com and
9 10 11 12 13 14 15 16 17
 * Applied Data Security Group, Ruhr-University Bochum, Germany
 * Project-Homepage: http://www.prosec.rub.de/tpm
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation, version 2 of the
 * License.
 */

18
#include <linux/init.h>
19
#include <linux/pnp.h>
20 21 22 23 24 25 26 27 28 29 30
#include "tpm.h"

/* Infineon specific definitions */
/* maximum number of WTX-packages */
#define	TPM_MAX_WTX_PACKAGES 	50
/* msleep-Time for WTX-packages */
#define	TPM_WTX_MSLEEP_TIME 	20
/* msleep-Time --> Interval to check status register */
#define	TPM_MSLEEP_TIME 	3
/* gives number of max. msleep()-calls before throwing timeout */
#define	TPM_MAX_TRIES		5000
31 32
#define	TPM_INFINEON_DEV_VEN_VALUE	0x15D1

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86
#define TPM_INF_IO_PORT		0x0
#define TPM_INF_IO_MEM		0x1

#define TPM_INF_ADDR		0x0
#define TPM_INF_DATA		0x1

struct tpm_inf_dev {
	int iotype;

	void __iomem *mem_base;		/* MMIO ioremap'd addr */
	unsigned long map_base;		/* phys MMIO base */
	unsigned long map_size;		/* MMIO region size */
	unsigned int index_off;		/* index register offset */

	unsigned int data_regs;		/* Data registers */
	unsigned int data_size;

	unsigned int config_port;	/* IO Port config index reg */
	unsigned int config_size;
};

static struct tpm_inf_dev tpm_dev;

static inline void tpm_data_out(unsigned char data, unsigned char offset)
{
	if (tpm_dev.iotype == TPM_INF_IO_PORT)
		outb(data, tpm_dev.data_regs + offset);
	else
		writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
}

static inline unsigned char tpm_data_in(unsigned char offset)
{
	if (tpm_dev.iotype == TPM_INF_IO_PORT)
		return inb(tpm_dev.data_regs + offset);
	else
		return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
}

static inline void tpm_config_out(unsigned char data, unsigned char offset)
{
	if (tpm_dev.iotype == TPM_INF_IO_PORT)
		outb(data, tpm_dev.config_port + offset);
	else
		writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
}

static inline unsigned char tpm_config_in(unsigned char offset)
{
	if (tpm_dev.iotype == TPM_INF_IO_PORT)
		return inb(tpm_dev.config_port + offset);
	else
		return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
}
87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133

/* TPM header definitions */
enum infineon_tpm_header {
	TPM_VL_VER = 0x01,
	TPM_VL_CHANNEL_CONTROL = 0x07,
	TPM_VL_CHANNEL_PERSONALISATION = 0x0A,
	TPM_VL_CHANNEL_TPM = 0x0B,
	TPM_VL_CONTROL = 0x00,
	TPM_INF_NAK = 0x15,
	TPM_CTRL_WTX = 0x10,
	TPM_CTRL_WTX_ABORT = 0x18,
	TPM_CTRL_WTX_ABORT_ACK = 0x18,
	TPM_CTRL_ERROR = 0x20,
	TPM_CTRL_CHAININGACK = 0x40,
	TPM_CTRL_CHAINING = 0x80,
	TPM_CTRL_DATA = 0x04,
	TPM_CTRL_DATA_CHA = 0x84,
	TPM_CTRL_DATA_CHA_ACK = 0xC4
};

enum infineon_tpm_register {
	WRFIFO = 0x00,
	RDFIFO = 0x01,
	STAT = 0x02,
	CMD = 0x03
};

enum infineon_tpm_command_bits {
	CMD_DIS = 0x00,
	CMD_LP = 0x01,
	CMD_RES = 0x02,
	CMD_IRQC = 0x06
};

enum infineon_tpm_status_bits {
	STAT_XFE = 0x00,
	STAT_LPA = 0x01,
	STAT_FOK = 0x02,
	STAT_TOK = 0x03,
	STAT_IRQA = 0x06,
	STAT_RDA = 0x07
};

/* some outgoing values */
enum infineon_tpm_values {
	CHIP_ID1 = 0x20,
	CHIP_ID2 = 0x21,
134
	TPM_DAR = 0x30,
135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155
	RESET_LP_IRQC_DISABLE = 0x41,
	ENABLE_REGISTER_PAIR = 0x55,
	IOLIMH = 0x60,
	IOLIML = 0x61,
	DISABLE_REGISTER_PAIR = 0xAA,
	IDVENL = 0xF1,
	IDVENH = 0xF2,
	IDPDL = 0xF3,
	IDPDH = 0xF4
};

static int number_of_wtx;

static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo)
{
	int status;
	int check = 0;
	int i;

	if (clear_wrfifo) {
		for (i = 0; i < 4096; i++) {
156
			status = tpm_data_in(WRFIFO);
157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175
			if (status == 0xff) {
				if (check == 5)
					break;
				else
					check++;
			}
		}
	}
	/* Note: The values which are currently in the FIFO of the TPM
	   are thrown away since there is no usage for them. Usually,
	   this has nothing to say, since the TPM will give its answer
	   immediately or will be aborted anyway, so the data here is
	   usually garbage and useless.
	   We have to clean this, because the next communication with
	   the TPM would be rubbish, if there is still some old data
	   in the Read FIFO.
	 */
	i = 0;
	do {
176 177
		status = tpm_data_in(RDFIFO);
		status = tpm_data_in(STAT);
178 179 180 181 182 183 184 185 186 187 188 189
		i++;
		if (i == TPM_MAX_TRIES)
			return -EIO;
	} while ((status & (1 << STAT_RDA)) != 0);
	return 0;
}

static int wait(struct tpm_chip *chip, int wait_for_bit)
{
	int status;
	int i;
	for (i = 0; i < TPM_MAX_TRIES; i++) {
190
		status = tpm_data_in(STAT);
191 192 193 194 195 196 197
		/* check the status-register if wait_for_bit is set */
		if (status & 1 << wait_for_bit)
			break;
		msleep(TPM_MSLEEP_TIME);
	}
	if (i == TPM_MAX_TRIES) {	/* timeout occurs */
		if (wait_for_bit == STAT_XFE)
198
			dev_err(chip->dev, "Timeout in wait(STAT_XFE)\n");
199
		if (wait_for_bit == STAT_RDA)
200
			dev_err(chip->dev, "Timeout in wait(STAT_RDA)\n");
201 202 203 204 205 206 207 208
		return -EIO;
	}
	return 0;
};

static void wait_and_send(struct tpm_chip *chip, u8 sendbyte)
{
	wait(chip, STAT_XFE);
209
	tpm_data_out(sendbyte, WRFIFO);
210 211 212 213 214 215 216 217 218 219 220 221 222
}

    /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more
       calculation time, it sends a WTX-package, which has to be acknowledged
       or aborted. This usually occurs if you are hammering the TPM with key
       creation. Set the maximum number of WTX-packages in the definitions
       above, if the number is reached, the waiting-time will be denied
       and the TPM command has to be resend.
     */

static void tpm_wtx(struct tpm_chip *chip)
{
	number_of_wtx++;
223
	dev_info(chip->dev, "Granting WTX (%02d / %02d)\n",
224 225 226 227 228 229 230 231 232 233
		 number_of_wtx, TPM_MAX_WTX_PACKAGES);
	wait_and_send(chip, TPM_VL_VER);
	wait_and_send(chip, TPM_CTRL_WTX);
	wait_and_send(chip, 0x00);
	wait_and_send(chip, 0x00);
	msleep(TPM_WTX_MSLEEP_TIME);
}

static void tpm_wtx_abort(struct tpm_chip *chip)
{
234
	dev_info(chip->dev, "Aborting WTX\n");
235 236 237 238 239 240 241 242 243 244 245 246 247
	wait_and_send(chip, TPM_VL_VER);
	wait_and_send(chip, TPM_CTRL_WTX_ABORT);
	wait_and_send(chip, 0x00);
	wait_and_send(chip, 0x00);
	number_of_wtx = 0;
	msleep(TPM_WTX_MSLEEP_TIME);
}

static int tpm_inf_recv(struct tpm_chip *chip, u8 * buf, size_t count)
{
	int i;
	int ret;
	u32 size = 0;
248
	number_of_wtx = 0;
249 250 251 252 253 254 255

recv_begin:
	/* start receiving header */
	for (i = 0; i < 4; i++) {
		ret = wait(chip, STAT_RDA);
		if (ret)
			return -EIO;
256
		buf[i] = tpm_data_in(RDFIFO);
257 258 259
	}

	if (buf[0] != TPM_VL_VER) {
260
		dev_err(chip->dev,
261 262 263 264 265 266 267 268 269 270
			"Wrong transport protocol implementation!\n");
		return -EIO;
	}

	if (buf[1] == TPM_CTRL_DATA) {
		/* size of the data received */
		size = ((buf[2] << 8) | buf[3]);

		for (i = 0; i < size; i++) {
			wait(chip, STAT_RDA);
271
			buf[i] = tpm_data_in(RDFIFO);
272 273 274
		}

		if ((size == 0x6D00) && (buf[1] == 0x80)) {
275
			dev_err(chip->dev, "Error handling on vendor layer!\n");
276 277 278 279 280 281 282 283 284 285 286
			return -EIO;
		}

		for (i = 0; i < size; i++)
			buf[i] = buf[i + 6];

		size = size - 6;
		return size;
	}

	if (buf[1] == TPM_CTRL_WTX) {
287
		dev_info(chip->dev, "WTX-package received\n");
288 289 290 291 292 293 294 295 296 297
		if (number_of_wtx < TPM_MAX_WTX_PACKAGES) {
			tpm_wtx(chip);
			goto recv_begin;
		} else {
			tpm_wtx_abort(chip);
			goto recv_begin;
		}
	}

	if (buf[1] == TPM_CTRL_WTX_ABORT_ACK) {
298
		dev_info(chip->dev, "WTX-abort acknowledged\n");
299 300 301 302
		return size;
	}

	if (buf[1] == TPM_CTRL_ERROR) {
303
		dev_err(chip->dev, "ERROR-package received:\n");
304
		if (buf[4] == TPM_INF_NAK)
305
			dev_err(chip->dev,
306 307 308 309 310 311 312 313 314 315 316 317 318 319
				"-> Negative acknowledgement"
				" - retransmit command!\n");
		return -EIO;
	}
	return -EIO;
}

static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count)
{
	int i;
	int ret;
	u8 count_high, count_low, count_4, count_3, count_2, count_1;

	/* Disabling Reset, LP and IRQC */
320
	tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
321 322 323

	ret = empty_fifo(chip, 1);
	if (ret) {
324
		dev_err(chip->dev, "Timeout while clearing FIFO\n");
325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361
		return -EIO;
	}

	ret = wait(chip, STAT_XFE);
	if (ret)
		return -EIO;

	count_4 = (count & 0xff000000) >> 24;
	count_3 = (count & 0x00ff0000) >> 16;
	count_2 = (count & 0x0000ff00) >> 8;
	count_1 = (count & 0x000000ff);
	count_high = ((count + 6) & 0xffffff00) >> 8;
	count_low = ((count + 6) & 0x000000ff);

	/* Sending Header */
	wait_and_send(chip, TPM_VL_VER);
	wait_and_send(chip, TPM_CTRL_DATA);
	wait_and_send(chip, count_high);
	wait_and_send(chip, count_low);

	/* Sending Data Header */
	wait_and_send(chip, TPM_VL_VER);
	wait_and_send(chip, TPM_VL_CHANNEL_TPM);
	wait_and_send(chip, count_4);
	wait_and_send(chip, count_3);
	wait_and_send(chip, count_2);
	wait_and_send(chip, count_1);

	/* Sending Data */
	for (i = 0; i < count; i++) {
		wait_and_send(chip, buf[i]);
	}
	return count;
}

static void tpm_inf_cancel(struct tpm_chip *chip)
{
362 363 364 365
	/*
	   Since we are using the legacy mode to communicate
	   with the TPM, we have no cancel functions, but have
	   a workaround for interrupting the TPM through WTX.
366 367 368
	 */
}

369 370
static u8 tpm_inf_status(struct tpm_chip *chip)
{
371
	return tpm_data_in(STAT);
372 373
}

374 375 376 377 378 379 380 381 382 383 384 385 386 387 388
static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL);
static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);

static struct attribute *inf_attrs[] = {
	&dev_attr_pubek.attr,
	&dev_attr_pcrs.attr,
	&dev_attr_caps.attr,
	&dev_attr_cancel.attr,
	NULL,
};

static struct attribute_group inf_attr_grp = {.attrs = inf_attrs };

389
static const struct file_operations inf_ops = {
390 391 392 393 394 395 396 397
	.owner = THIS_MODULE,
	.llseek = no_llseek,
	.open = tpm_open,
	.read = tpm_read,
	.write = tpm_write,
	.release = tpm_release,
};

398
static const struct tpm_vendor_specific tpm_inf = {
399 400 401
	.recv = tpm_inf_recv,
	.send = tpm_inf_send,
	.cancel = tpm_inf_cancel,
402
	.status = tpm_inf_status,
403 404 405 406 407 408
	.req_complete_mask = 0,
	.req_complete_val = 0,
	.attr_group = &inf_attr_grp,
	.miscdev = {.fops = &inf_ops,},
};

409 410 411 412 413 414
static const struct pnp_device_id tpm_pnp_tbl[] = {
	/* Infineon TPMs */
	{"IFX0101", 0},
	{"IFX0102", 0},
	{"", 0}
};
415

416
MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
417

418
static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
419
				       const struct pnp_device_id *dev_id)
420 421 422 423 424 425
{
	int rc = 0;
	u8 iol, ioh;
	int vendorid[2];
	int version[2];
	int productid[2];
426
	char chipname[20];
427
	struct tpm_chip *chip;
428

429 430 431
	/* read IO-ports through PnP */
	if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
	    !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
432 433 434 435 436 437 438 439

	    	tpm_dev.iotype = TPM_INF_IO_PORT;

		tpm_dev.config_port = pnp_port_start(dev, 0);
		tpm_dev.config_size = pnp_port_len(dev, 0);
		tpm_dev.data_regs = pnp_port_start(dev, 1);
		tpm_dev.data_size = pnp_port_len(dev, 1);
		if ((tpm_dev.data_size < 4) || (tpm_dev.config_size < 2)) {
440 441 442
			rc = -EINVAL;
			goto err_last;
		}
443 444
		dev_info(&dev->dev, "Found %s with ID %s\n",
			 dev->name, dev_id->id);
445
		if (!((tpm_dev.data_regs >> 8) & 0xff)) {
446 447 448
			rc = -EINVAL;
			goto err_last;
		}
449
		/* publish my base address and request region */
450 451
		if (request_region(tpm_dev.data_regs, tpm_dev.data_size,
				   "tpm_infineon0") == NULL) {
452 453 454
			rc = -EINVAL;
			goto err_last;
		}
455 456 457
		if (request_region(tpm_dev.config_port, tpm_dev.config_size,
				   "tpm_infineon0") == NULL) {
			release_region(tpm_dev.data_regs, tpm_dev.data_size);
458 459
			rc = -EINVAL;
			goto err_last;
460
		}
461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494
	} else if (pnp_mem_valid(dev, 0) &&
	           !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) {

	    	tpm_dev.iotype = TPM_INF_IO_MEM;

		tpm_dev.map_base = pnp_mem_start(dev, 0);
		tpm_dev.map_size = pnp_mem_len(dev, 0);

		dev_info(&dev->dev, "Found %s with ID %s\n",
			 dev->name, dev_id->id);

		/* publish my base address and request region */
		if (request_mem_region(tpm_dev.map_base, tpm_dev.map_size,
				       "tpm_infineon0") == NULL) {
			rc = -EINVAL;
			goto err_last;
		}

		tpm_dev.mem_base = ioremap(tpm_dev.map_base, tpm_dev.map_size);
		if (tpm_dev.mem_base == NULL) {
			release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
			rc = -EINVAL;
			goto err_last;
		}

		/*
		 * The only known MMIO based Infineon TPM system provides
		 * a single large mem region with the device config
		 * registers at the default TPM_ADDR.  The data registers
		 * seem like they could be placed anywhere within the MMIO
		 * region, but lets just put them at zero offset.
		 */
		tpm_dev.index_off = TPM_ADDR;
		tpm_dev.data_regs = 0x0;
495
	} else {
496 497
		rc = -EINVAL;
		goto err_last;
498 499
	}

500
	/* query chip for its vendor, its version number a.s.o. */
501 502 503 504 505 506 507 508 509 510 511 512 513
	tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
	tpm_config_out(IDVENL, TPM_INF_ADDR);
	vendorid[1] = tpm_config_in(TPM_INF_DATA);
	tpm_config_out(IDVENH, TPM_INF_ADDR);
	vendorid[0] = tpm_config_in(TPM_INF_DATA);
	tpm_config_out(IDPDL, TPM_INF_ADDR);
	productid[1] = tpm_config_in(TPM_INF_DATA);
	tpm_config_out(IDPDH, TPM_INF_ADDR);
	productid[0] = tpm_config_in(TPM_INF_DATA);
	tpm_config_out(CHIP_ID1, TPM_INF_ADDR);
	version[1] = tpm_config_in(TPM_INF_DATA);
	tpm_config_out(CHIP_ID2, TPM_INF_ADDR);
	version[0] = tpm_config_in(TPM_INF_DATA);
514 515 516

	switch ((productid[0] << 8) | productid[1]) {
	case 6:
517
		snprintf(chipname, sizeof(chipname), " (SLD 9630 TT 1.1)");
518 519
		break;
	case 11:
520
		snprintf(chipname, sizeof(chipname), " (SLB 9635 TT 1.2)");
521 522
		break;
	default:
523
		snprintf(chipname, sizeof(chipname), " (unknown chip)");
524 525 526 527
		break;
	}

	if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) {
528

529
		/* configure TPM with IO-ports */
530 531 532 533
		tpm_config_out(IOLIMH, TPM_INF_ADDR);
		tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
		tpm_config_out(IOLIML, TPM_INF_ADDR);
		tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
534 535

		/* control if IO-ports are set correctly */
536 537 538 539
		tpm_config_out(IOLIMH, TPM_INF_ADDR);
		ioh = tpm_config_in(TPM_INF_DATA);
		tpm_config_out(IOLIML, TPM_INF_ADDR);
		iol = tpm_config_in(TPM_INF_DATA);
540

541
		if ((ioh << 8 | iol) != tpm_dev.data_regs) {
542
			dev_err(&dev->dev,
543 544
				"Could not set IO-data registers to 0x%x\n",
				tpm_dev.data_regs);
545 546
			rc = -EIO;
			goto err_release_region;
547 548 549
		}

		/* activate register */
550 551 552
		tpm_config_out(TPM_DAR, TPM_INF_ADDR);
		tpm_config_out(0x01, TPM_INF_DATA);
		tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
553 554

		/* disable RESET, LP and IRQC */
555
		tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
556 557

		/* Finally, we're done, print some infos */
558
		dev_info(&dev->dev, "TPM found: "
559 560
			 "config base 0x%lx, "
			 "data base 0x%lx, "
561 562 563
			 "chip version 0x%02x%02x, "
			 "vendor id 0x%x%x (Infineon), "
			 "product id 0x%02x%02x"
564
			 "%s\n",
565 566 567 568 569 570
			 tpm_dev.iotype == TPM_INF_IO_PORT ?
				tpm_dev.config_port :
				tpm_dev.map_base + tpm_dev.index_off,
			 tpm_dev.iotype == TPM_INF_IO_PORT ?
				tpm_dev.data_regs :
				tpm_dev.map_base + tpm_dev.data_regs,
571 572
			 version[0], version[1],
			 vendorid[0], vendorid[1],
573
			 productid[0], productid[1], chipname);
574

575
		if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf)))
576
			goto err_release_region;
577

578 579
		return 0;
	} else {
580 581
		rc = -ENODEV;
		goto err_release_region;
582
	}
583 584

err_release_region:
585 586 587 588 589 590 591
	if (tpm_dev.iotype == TPM_INF_IO_PORT) {
		release_region(tpm_dev.data_regs, tpm_dev.data_size);
		release_region(tpm_dev.config_port, tpm_dev.config_size);
	} else {
		iounmap(tpm_dev.mem_base);
		release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
	}
592 593 594

err_last:
	return rc;
595 596
}

597
static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev)
598
{
599
	struct tpm_chip *chip = pnp_get_drvdata(dev);
600

601
	if (chip) {
602 603 604 605 606 607 608 609
		if (tpm_dev.iotype == TPM_INF_IO_PORT) {
			release_region(tpm_dev.data_regs, tpm_dev.data_size);
			release_region(tpm_dev.config_port,
				       tpm_dev.config_size);
		} else {
			iounmap(tpm_dev.mem_base);
			release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
		}
610
		tpm_remove_hardware(chip->dev);
611
	}
612 613
}

R
Randy Dunlap 已提交
614
static struct pnp_driver tpm_inf_pnp_driver = {
615 616 617 618 619 620 621 622
	.name = "tpm_inf_pnp",
	.driver = {
		.owner = THIS_MODULE,
		.suspend = tpm_pm_suspend,
		.resume = tpm_pm_resume,
	},
	.id_table = tpm_pnp_tbl,
	.probe = tpm_inf_pnp_probe,
623
	.remove = __devexit_p(tpm_inf_pnp_remove),
624 625 626 627
};

static int __init init_inf(void)
{
R
Randy Dunlap 已提交
628
	return pnp_register_driver(&tpm_inf_pnp_driver);
629 630 631 632
}

static void __exit cleanup_inf(void)
{
R
Randy Dunlap 已提交
633
	pnp_unregister_driver(&tpm_inf_pnp_driver);
634 635 636 637 638
}

module_init(init_inf);
module_exit(cleanup_inf);

639
MODULE_AUTHOR("Marcel Selhorst <m.selhorst@sirrix.com>");
640
MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
641
MODULE_VERSION("1.9");
642
MODULE_LICENSE("GPL");