m5602_po1030.c 8.9 KB
Newer Older
1 2 3
/*
 * Driver for the po1030 sensor
 *
4
 * Copyright (c) 2008 Erik Andrén
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
 * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
 * Copyright (c) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
 *
 * Portions of code to USB interface and ALi driver software,
 * Copyright (c) 2006 Willem Duinker
 * v4l2 interface modeled after the V4L2 driver
 * for SN9C10x PC Camera Controllers
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation, version 2.
 *
 */

#include "m5602_po1030.h"

int po1030_probe(struct sd *sd)
{
	u8 prod_id = 0, ver_id = 0, i;

	if (force_sensor) {
		if (force_sensor == PO1030_SENSOR) {
			info("Forcing a %s sensor", po1030.name);
			goto sensor_found;
		}
		/* If we want to force another sensor, don't try to probe this
		 * one */
		return -ENODEV;
	}

	info("Probing for a po1030 sensor");

	/* Run the pre-init to actually probe the unit */
	for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) {
		u8 data = preinit_po1030[i][2];
		if (preinit_po1030[i][0] == SENSOR)
			po1030_write_sensor(sd,
				preinit_po1030[i][1], &data, 1);
		else
			m5602_write_bridge(sd, preinit_po1030[i][1], data);
	}

	if (po1030_read_sensor(sd, 0x3, &prod_id, 1))
		return -ENODEV;

	if (po1030_read_sensor(sd, 0x4, &ver_id, 1))
		return -ENODEV;

	if ((prod_id == 0x02) && (ver_id == 0xef)) {
		info("Detected a po1030 sensor");
		goto sensor_found;
	}
	return -ENODEV;

sensor_found:
	sd->gspca_dev.cam.cam_mode = po1030.modes;
	sd->gspca_dev.cam.nmodes = po1030.nmodes;
62 63
	sd->desc->ctrls = po1030.ctrls;
	sd->desc->nctrls = po1030.nctrls;
64 65 66 67 68 69 70 71 72 73 74 75
	return 0;
}

int po1030_read_sensor(struct sd *sd, const u8 address,
			u8 *i2c_data, const u8 len)
{
	int err, i;

	do {
		err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data);
	} while ((*i2c_data & I2C_BUSY) && !err);

76 77 78 79 80 81 82 83 84 85 86 87 88
	err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR,
				 sd->sensor->i2c_slave_id);
	if (err < 0)
		goto out;
	err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address);
	if (err < 0)
		goto out;
	err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x10 + len);
	if (err < 0)
		goto out;
	err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08);
	if (err < 0)
		goto out;
89

90
	for (i = 0; (i < len) && !err; i++) {
91 92
		err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i]));

93
		PDEBUG(D_CONF, "Reading sensor register "
94 95
				"0x%x containing 0x%x ", address, *i2c_data);
	}
96 97
out:
	return err;
98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123
}

int po1030_write_sensor(struct sd *sd, const u8 address,
			u8 *i2c_data, const u8 len)
{
	int err, i;
	u8 *p;
	struct usb_device *udev = sd->gspca_dev.dev;
	__u8 *buf = sd->gspca_dev.usb_buf;

	/* The po1030 only supports one byte writes */
	if (len > 1 || !len)
		return -EINVAL;

	memcpy(buf, sensor_urb_skeleton, sizeof(sensor_urb_skeleton));

	buf[11] = sd->sensor->i2c_slave_id;
	buf[15] = address;

	p = buf + 16;

	/* Copy a four byte write sequence for each byte to be written to */
	for (i = 0; i < len; i++) {
		memcpy(p, sensor_urb_skeleton + 16, 4);
		p[3] = i2c_data[i];
		p += 4;
124
		PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x",
125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146
		       address, i2c_data[i]);
	}

	/* Copy the footer */
	memcpy(p, sensor_urb_skeleton + 20, 4);

	/* Set the total length */
	p[3] = 0x10 + len;

	err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
			      0x04, 0x40, 0x19,
			      0x0000, buf,
			      20 + len * 4, M5602_URB_MSG_TIMEOUT);

	return (err < 0) ? err : 0;
}

int po1030_init(struct sd *sd)
{
	int i, err = 0;

	/* Init the sensor */
147
	for (i = 0; i < ARRAY_SIZE(init_po1030) && !err; i++) {
148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177
		u8 data[2] = {0x00, 0x00};

		switch (init_po1030[i][0]) {
		case BRIDGE:
			err = m5602_write_bridge(sd,
				init_po1030[i][1],
				init_po1030[i][2]);
			break;

		case SENSOR:
			data[0] = init_po1030[i][2];
			err = po1030_write_sensor(sd,
				init_po1030[i][1], data, 1);
			break;

		case SENSOR_LONG:
			data[0] = init_po1030[i][2];
			data[1] = init_po1030[i][3];
			err = po1030_write_sensor(sd,
				init_po1030[i][1], data, 2);
			break;
		default:
			info("Invalid stream command, exiting init");
			return -EINVAL;
		}
	}

	if (dump_sensor)
		po1030_dump_registers(sd);

178
	return err;
179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196
}

int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_H,
				 &i2c_data, 1);
	if (err < 0)
		goto out;
	*val = (i2c_data << 8);

	err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_M,
				 &i2c_data, 1);
	*val |= i2c_data;

197
	PDEBUG(D_V4L2, "Exposure read as %d", *val);
198
out:
199
	return err;
200 201 202 203 204 205 206 207
}

int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

208
	PDEBUG(D_V4L2, "Set exposure to %d", val & 0xffff);
209 210

	i2c_data = ((val & 0xff00) >> 8);
211
	PDEBUG(D_V4L2, "Set exposure to high byte to 0x%x",
212 213 214 215 216 217 218 219
	       i2c_data);

	err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_H,
				  &i2c_data, 1);
	if (err < 0)
		goto out;

	i2c_data = (val & 0xff);
220
	PDEBUG(D_V4L2, "Set exposure to low byte to 0x%x",
221 222 223 224 225
	       i2c_data);
	err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_M,
				  &i2c_data, 1);

out:
226
	return err;
227 228 229 230 231 232 233 234 235 236 237
}

int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN,
				 &i2c_data, 1);
	*val = i2c_data;
238
	PDEBUG(D_V4L2, "Read global gain %d", *val);
239

240
	return err;
241 242
}

243 244 245 246 247 248 249 250 251 252 253 254 255
int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	err = po1030_read_sensor(sd, PO1030_REG_CONTROL2,
				 &i2c_data, 1);

	*val = (i2c_data >> 7) & 0x01 ;

	PDEBUG(D_V4L2, "Read hflip %d", *val);

256
	return err;
257 258 259 260 261 262 263 264 265 266 267 268 269 270 271
}

int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	PDEBUG(D_V4L2, "Set hflip %d", val);

	i2c_data = (val & 0x01) << 7;

	err = po1030_write_sensor(sd, PO1030_REG_CONTROL2,
				  &i2c_data, 1);

272
	return err;
273 274 275 276 277 278 279 280 281 282 283 284 285 286 287
}

int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN,
				 &i2c_data, 1);

	*val = (i2c_data >> 6) & 0x01;

	PDEBUG(D_V4L2, "Read vflip %d", *val);

288
	return err;
289 290 291 292 293 294 295 296 297 298 299 300 301 302 303
}

int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	PDEBUG(D_V4L2, "Set vflip %d", val);

	i2c_data = (val & 0x01) << 6;

	err = po1030_write_sensor(sd, PO1030_REG_CONTROL2,
				  &i2c_data, 1);

304
	return err;
305 306
}

307 308 309 310 311 312 313
int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	i2c_data = val & 0xff;
314
	PDEBUG(D_V4L2, "Set global gain to %d", i2c_data);
315 316
	err = po1030_write_sensor(sd, PO1030_REG_GLOBALGAIN,
				  &i2c_data, 1);
317
	return err;
318 319 320 321 322 323 324 325 326 327 328
}

int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	err = po1030_read_sensor(sd, PO1030_REG_RED_GAIN,
				 &i2c_data, 1);
	*val = i2c_data;
329
	PDEBUG(D_V4L2, "Read red gain %d", *val);
330
	return err;
331 332 333 334 335 336 337 338 339
}

int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	i2c_data = val & 0xff;
340
	PDEBUG(D_V4L2, "Set red gain to %d", i2c_data);
341 342
	err = po1030_write_sensor(sd, PO1030_REG_RED_GAIN,
				  &i2c_data, 1);
343
	return err;
344 345 346 347 348 349 350 351 352 353 354
}

int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;

	err = po1030_read_sensor(sd, PO1030_REG_BLUE_GAIN,
				 &i2c_data, 1);
	*val = i2c_data;
355
	PDEBUG(D_V4L2, "Read blue gain %d", *val);
356

357
	return err;
358 359 360 361 362 363 364 365
}

int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 i2c_data;
	int err;
	i2c_data = val & 0xff;
366
	PDEBUG(D_V4L2, "Set blue gain to %d", i2c_data);
367 368 369
	err = po1030_write_sensor(sd, PO1030_REG_BLUE_GAIN,
				  &i2c_data, 1);

370
	return err;
371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409
}

int po1030_power_down(struct sd *sd)
{
	return 0;
}

void po1030_dump_registers(struct sd *sd)
{
	int address;
	u8 value = 0;

	info("Dumping the po1030 sensor core registers");
	for (address = 0; address < 0x7f; address++) {
		po1030_read_sensor(sd, address, &value, 1);
		info("register 0x%x contains 0x%x",
		     address, value);
	}

	info("po1030 register state dump complete");

	info("Probing for which registers that are read/write");
	for (address = 0; address < 0xff; address++) {
		u8 old_value, ctrl_value;
		u8 test_value[2] = {0xff, 0xff};

		po1030_read_sensor(sd, address, &old_value, 1);
		po1030_write_sensor(sd, address, test_value, 1);
		po1030_read_sensor(sd, address, &ctrl_value, 1);

		if (ctrl_value == test_value[0])
			info("register 0x%x is writeable", address);
		else
			info("register 0x%x is read only", address);

		/* Restore original value */
		po1030_write_sensor(sd, address, &old_value, 1);
	}
}