opp.c 23.6 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
/*
 * Generic OPP Interface
 *
 * Copyright (C) 2009-2010 Texas Instruments Incorporated.
 *	Nishanth Menon
 *	Romit Dasgupta
 *	Kevin Hilman
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/slab.h>
18
#include <linux/device.h>
19 20 21
#include <linux/list.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
22
#include <linux/pm_opp.h>
23
#include <linux/of.h>
24
#include <linux/export.h>
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

/*
 * Internal data structure organization with the OPP layer library is as
 * follows:
 * dev_opp_list (root)
 *	|- device 1 (represents voltage domain 1)
 *	|	|- opp 1 (availability, freq, voltage)
 *	|	|- opp 2 ..
 *	...	...
 *	|	`- opp n ..
 *	|- device 2 (represents the next voltage domain)
 *	...
 *	`- device m (represents mth voltage domain)
 * device 1, 2.. are represented by dev_opp structure while each opp
 * is represented by the opp structure.
 */

/**
43
 * struct dev_pm_opp - Generic OPP description structure
44 45 46 47 48 49 50 51
 * @node:	opp list node. The nodes are maintained throughout the lifetime
 *		of boot. It is expected only an optimal set of OPPs are
 *		added to the library by the SoC framework.
 *		RCU usage: opp list is traversed with RCU locks. node
 *		modification is possible realtime, hence the modifications
 *		are protected by the dev_opp_list_lock for integrity.
 *		IMPORTANT: the opp nodes should be maintained in increasing
 *		order.
52
 * @dynamic:	not-created from static DT entries.
53 54 55 56
 * @available:	true/false - marks if this OPP as available or not
 * @rate:	Frequency in hertz
 * @u_volt:	Nominal voltage in microvolts corresponding to this OPP
 * @dev_opp:	points back to the device_opp struct this opp belongs to
57
 * @rcu_head:	RCU callback head used for deferred freeing
58 59 60
 *
 * This structure stores the OPP information for a given device.
 */
61
struct dev_pm_opp {
62 63 64
	struct list_head node;

	bool available;
65
	bool dynamic;
66 67 68 69
	unsigned long rate;
	unsigned long u_volt;

	struct device_opp *dev_opp;
70
	struct rcu_head rcu_head;
71 72 73 74 75 76 77 78 79 80
};

/**
 * struct device_opp - Device opp structure
 * @node:	list node - contains the devices with OPPs that
 *		have been registered. Nodes once added are not modified in this
 *		list.
 *		RCU usage: nodes are not modified in the list of device_opp,
 *		however addition is possible and is secured by dev_opp_list_lock
 * @dev:	device pointer
81
 * @srcu_head:	notifier head to notify the OPP availability changes.
82
 * @rcu_head:	RCU callback head used for deferred freeing
83 84 85 86 87 88 89 90 91 92
 * @opp_list:	list of opps
 *
 * This is an internal data structure maintaining the link to opps attached to
 * a device. This structure is not meant to be shared to users as it is
 * meant for book keeping and private to OPP library
 */
struct device_opp {
	struct list_head node;

	struct device *dev;
93
	struct srcu_notifier_head srcu_head;
94
	struct rcu_head rcu_head;
95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140
	struct list_head opp_list;
};

/*
 * The root of the list of all devices. All device_opp structures branch off
 * from here, with each device_opp containing the list of opp it supports in
 * various states of availability.
 */
static LIST_HEAD(dev_opp_list);
/* Lock to allow exclusive modification to the device and opp lists */
static DEFINE_MUTEX(dev_opp_list_lock);

/**
 * find_device_opp() - find device_opp struct using device pointer
 * @dev:	device pointer used to lookup device OPPs
 *
 * Search list of device OPPs for one containing matching device. Does a RCU
 * reader operation to grab the pointer needed.
 *
 * Returns pointer to 'struct device_opp' if found, otherwise -ENODEV or
 * -EINVAL based on type of error.
 *
 * Locking: This function must be called under rcu_read_lock(). device_opp
 * is a RCU protected pointer. This means that device_opp is valid as long
 * as we are under RCU lock.
 */
static struct device_opp *find_device_opp(struct device *dev)
{
	struct device_opp *tmp_dev_opp, *dev_opp = ERR_PTR(-ENODEV);

	if (unlikely(IS_ERR_OR_NULL(dev))) {
		pr_err("%s: Invalid parameters\n", __func__);
		return ERR_PTR(-EINVAL);
	}

	list_for_each_entry_rcu(tmp_dev_opp, &dev_opp_list, node) {
		if (tmp_dev_opp->dev == dev) {
			dev_opp = tmp_dev_opp;
			break;
		}
	}

	return dev_opp;
}

/**
141
 * dev_pm_opp_get_voltage() - Gets the voltage corresponding to an available opp
142 143 144 145 146 147 148 149 150 151 152 153 154
 * @opp:	opp for which voltage has to be returned for
 *
 * Return voltage in micro volt corresponding to the opp, else
 * return 0
 *
 * Locking: This function must be called under rcu_read_lock(). opp is a rcu
 * protected pointer. This means that opp which could have been fetched by
 * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are
 * under RCU lock. The pointer returned by the opp_find_freq family must be
 * used in the same section as the usage of this function with the pointer
 * prior to unlocking with rcu_read_unlock() to maintain the integrity of the
 * pointer.
 */
155
unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
156
{
157
	struct dev_pm_opp *tmp_opp;
158 159 160 161 162 163 164 165 166 167
	unsigned long v = 0;

	tmp_opp = rcu_dereference(opp);
	if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available)
		pr_err("%s: Invalid parameters\n", __func__);
	else
		v = tmp_opp->u_volt;

	return v;
}
168
EXPORT_SYMBOL_GPL(dev_pm_opp_get_voltage);
169 170

/**
171
 * dev_pm_opp_get_freq() - Gets the frequency corresponding to an available opp
172 173 174 175 176 177 178 179 180 181 182 183 184
 * @opp:	opp for which frequency has to be returned for
 *
 * Return frequency in hertz corresponding to the opp, else
 * return 0
 *
 * Locking: This function must be called under rcu_read_lock(). opp is a rcu
 * protected pointer. This means that opp which could have been fetched by
 * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are
 * under RCU lock. The pointer returned by the opp_find_freq family must be
 * used in the same section as the usage of this function with the pointer
 * prior to unlocking with rcu_read_unlock() to maintain the integrity of the
 * pointer.
 */
185
unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp)
186
{
187
	struct dev_pm_opp *tmp_opp;
188 189 190 191 192 193 194 195 196 197
	unsigned long f = 0;

	tmp_opp = rcu_dereference(opp);
	if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available)
		pr_err("%s: Invalid parameters\n", __func__);
	else
		f = tmp_opp->rate;

	return f;
}
198
EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
199 200

/**
201
 * dev_pm_opp_get_opp_count() - Get number of opps available in the opp list
202 203 204 205 206 207 208 209 210
 * @dev:	device for which we do this operation
 *
 * This function returns the number of available opps if there are any,
 * else returns 0 if none or the corresponding error value.
 *
 * Locking: This function must be called under rcu_read_lock(). This function
 * internally references two RCU protected structures: device_opp and opp which
 * are safe as long as we are under a common RCU locked section.
 */
211
int dev_pm_opp_get_opp_count(struct device *dev)
212 213
{
	struct device_opp *dev_opp;
214
	struct dev_pm_opp *temp_opp;
215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230
	int count = 0;

	dev_opp = find_device_opp(dev);
	if (IS_ERR(dev_opp)) {
		int r = PTR_ERR(dev_opp);
		dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r);
		return r;
	}

	list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
		if (temp_opp->available)
			count++;
	}

	return count;
}
231
EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count);
232 233

/**
234
 * dev_pm_opp_find_freq_exact() - search for an exact frequency
235 236
 * @dev:		device for which we do this operation
 * @freq:		frequency to search for
237
 * @available:		true/false - match for available opp
238 239 240
 *
 * Searches for exact match in the opp list and returns pointer to the matching
 * opp if found, else returns ERR_PTR in case of error and should be handled
241 242 243 244
 * using IS_ERR. Error return values can be:
 * EINVAL:	for bad pointer
 * ERANGE:	no match found for search
 * ENODEV:	if device not found in list of registered devices
245 246 247 248 249 250 251 252 253 254 255 256 257 258
 *
 * Note: available is a modifier for the search. if available=true, then the
 * match is for exact matching frequency and is available in the stored OPP
 * table. if false, the match is for exact frequency which is not available.
 *
 * This provides a mechanism to enable an opp which is not available currently
 * or the opposite as well.
 *
 * Locking: This function must be called under rcu_read_lock(). opp is a rcu
 * protected pointer. The reason for the same is that the opp pointer which is
 * returned will remain valid for use with opp_get_{voltage, freq} only while
 * under the locked area. The pointer returned must be used prior to unlocking
 * with rcu_read_unlock() to maintain the integrity of the pointer.
 */
259 260 261
struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
					      unsigned long freq,
					      bool available)
262 263
{
	struct device_opp *dev_opp;
264
	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282

	dev_opp = find_device_opp(dev);
	if (IS_ERR(dev_opp)) {
		int r = PTR_ERR(dev_opp);
		dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r);
		return ERR_PTR(r);
	}

	list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
		if (temp_opp->available == available &&
				temp_opp->rate == freq) {
			opp = temp_opp;
			break;
		}
	}

	return opp;
}
283
EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact);
284 285

/**
286
 * dev_pm_opp_find_freq_ceil() - Search for an rounded ceil freq
287 288 289 290 291 292 293
 * @dev:	device for which we do this operation
 * @freq:	Start frequency
 *
 * Search for the matching ceil *available* OPP from a starting freq
 * for a device.
 *
 * Returns matching *opp and refreshes *freq accordingly, else returns
294 295 296 297 298
 * ERR_PTR in case of error and should be handled using IS_ERR. Error return
 * values can be:
 * EINVAL:	for bad pointer
 * ERANGE:	no match found for search
 * ENODEV:	if device not found in list of registered devices
299 300 301 302 303 304 305
 *
 * Locking: This function must be called under rcu_read_lock(). opp is a rcu
 * protected pointer. The reason for the same is that the opp pointer which is
 * returned will remain valid for use with opp_get_{voltage, freq} only while
 * under the locked area. The pointer returned must be used prior to unlocking
 * with rcu_read_unlock() to maintain the integrity of the pointer.
 */
306 307
struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
					     unsigned long *freq)
308 309
{
	struct device_opp *dev_opp;
310
	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
311 312 313 314 315 316 317 318

	if (!dev || !freq) {
		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
		return ERR_PTR(-EINVAL);
	}

	dev_opp = find_device_opp(dev);
	if (IS_ERR(dev_opp))
319
		return ERR_CAST(dev_opp);
320 321 322 323 324 325 326 327 328 329 330

	list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
		if (temp_opp->available && temp_opp->rate >= *freq) {
			opp = temp_opp;
			*freq = opp->rate;
			break;
		}
	}

	return opp;
}
331
EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil);
332 333

/**
334
 * dev_pm_opp_find_freq_floor() - Search for a rounded floor freq
335 336 337 338 339 340 341
 * @dev:	device for which we do this operation
 * @freq:	Start frequency
 *
 * Search for the matching floor *available* OPP from a starting freq
 * for a device.
 *
 * Returns matching *opp and refreshes *freq accordingly, else returns
342 343 344 345 346
 * ERR_PTR in case of error and should be handled using IS_ERR. Error return
 * values can be:
 * EINVAL:	for bad pointer
 * ERANGE:	no match found for search
 * ENODEV:	if device not found in list of registered devices
347 348 349 350 351 352 353
 *
 * Locking: This function must be called under rcu_read_lock(). opp is a rcu
 * protected pointer. The reason for the same is that the opp pointer which is
 * returned will remain valid for use with opp_get_{voltage, freq} only while
 * under the locked area. The pointer returned must be used prior to unlocking
 * with rcu_read_unlock() to maintain the integrity of the pointer.
 */
354 355
struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
					      unsigned long *freq)
356 357
{
	struct device_opp *dev_opp;
358
	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
359 360 361 362 363 364 365 366

	if (!dev || !freq) {
		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
		return ERR_PTR(-EINVAL);
	}

	dev_opp = find_device_opp(dev);
	if (IS_ERR(dev_opp))
367
		return ERR_CAST(dev_opp);
368 369 370 371 372 373 374 375 376 377 378 379 380 381 382

	list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
		if (temp_opp->available) {
			/* go to the next node, before choosing prev */
			if (temp_opp->rate > *freq)
				break;
			else
				opp = temp_opp;
		}
	}
	if (!IS_ERR(opp))
		*freq = opp->rate;

	return opp;
}
383
EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
384

385 386
static int dev_pm_opp_add_dynamic(struct device *dev, unsigned long freq,
				  unsigned long u_volt, bool dynamic)
387 388
{
	struct device_opp *dev_opp = NULL;
389
	struct dev_pm_opp *opp, *new_opp;
390 391 392
	struct list_head *head;

	/* allocate new OPP node */
393
	new_opp = kzalloc(sizeof(*new_opp), GFP_KERNEL);
394 395 396 397 398 399 400 401
	if (!new_opp) {
		dev_warn(dev, "%s: Unable to create new OPP node\n", __func__);
		return -ENOMEM;
	}

	/* Hold our list modification lock here */
	mutex_lock(&dev_opp_list_lock);

402 403 404 405
	/* populate the opp table */
	new_opp->rate = freq;
	new_opp->u_volt = u_volt;
	new_opp->available = true;
406
	new_opp->dynamic = dynamic;
407

408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426
	/* Check for existing list for 'dev' */
	dev_opp = find_device_opp(dev);
	if (IS_ERR(dev_opp)) {
		/*
		 * Allocate a new device OPP table. In the infrequent case
		 * where a new device is needed to be added, we pay this
		 * penalty.
		 */
		dev_opp = kzalloc(sizeof(struct device_opp), GFP_KERNEL);
		if (!dev_opp) {
			mutex_unlock(&dev_opp_list_lock);
			kfree(new_opp);
			dev_warn(dev,
				"%s: Unable to create device OPP structure\n",
				__func__);
			return -ENOMEM;
		}

		dev_opp->dev = dev;
427
		srcu_init_notifier_head(&dev_opp->srcu_head);
428 429 430 431
		INIT_LIST_HEAD(&dev_opp->opp_list);

		/* Secure the device list modification */
		list_add_rcu(&dev_opp->node, &dev_opp_list);
432 433
		head = &dev_opp->opp_list;
		goto list_add;
434 435
	}

436 437 438 439
	/*
	 * Insert new OPP in order of increasing frequency
	 * and discard if already present
	 */
440 441
	head = &dev_opp->opp_list;
	list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) {
442
		if (new_opp->rate <= opp->rate)
443 444 445 446 447
			break;
		else
			head = &opp->node;
	}

448 449 450 451 452 453 454 455 456 457 458 459 460
	/* Duplicate OPPs ? */
	if (new_opp->rate == opp->rate) {
		int ret = opp->available && new_opp->u_volt == opp->u_volt ?
			0 : -EEXIST;

		dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
			 __func__, opp->rate, opp->u_volt, opp->available,
			 new_opp->rate, new_opp->u_volt, new_opp->available);
		mutex_unlock(&dev_opp_list_lock);
		kfree(new_opp);
		return ret;
	}

461
list_add:
462
	new_opp->dev_opp = dev_opp;
463 464 465
	list_add_rcu(&new_opp->node, head);
	mutex_unlock(&dev_opp_list_lock);

466 467 468 469
	/*
	 * Notify the changes in the availability of the operable
	 * frequency/voltage list.
	 */
470
	srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ADD, new_opp);
471 472
	return 0;
}
473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500

/**
 * dev_pm_opp_add()  - Add an OPP table from a table definitions
 * @dev:	device for which we do this operation
 * @freq:	Frequency in Hz for this OPP
 * @u_volt:	Voltage in uVolts for this OPP
 *
 * This function adds an opp definition to the opp list and returns status.
 * The opp is made available by default and it can be controlled using
 * dev_pm_opp_enable/disable functions.
 *
 * Locking: The internal device_opp and opp structures are RCU protected.
 * Hence this function internally uses RCU updater strategy with mutex locks
 * to keep the integrity of the internal data structures. Callers should ensure
 * that this function is *NOT* called under RCU protection or in contexts where
 * mutex cannot be locked.
 *
 * Return:
 * 0:		On success OR
 *		Duplicate OPPs (both freq and volt are same) and opp->available
 * -EEXIST:	Freq are same and volt are different OR
 *		Duplicate OPPs (both freq and volt are same) and !opp->available
 * -ENOMEM:	Memory allocation failure
 */
int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
{
	return dev_pm_opp_add_dynamic(dev, freq, u_volt, true);
}
501
EXPORT_SYMBOL_GPL(dev_pm_opp_add);
502

503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572
static void kfree_opp_rcu(struct rcu_head *head)
{
	struct dev_pm_opp *opp = container_of(head, struct dev_pm_opp, rcu_head);

	kfree_rcu(opp, rcu_head);
}

static void kfree_device_rcu(struct rcu_head *head)
{
	struct device_opp *device_opp = container_of(head, struct device_opp, rcu_head);

	kfree(device_opp);
}

void __dev_pm_opp_remove(struct device_opp *dev_opp, struct dev_pm_opp *opp)
{
	/*
	 * Notify the changes in the availability of the operable
	 * frequency/voltage list.
	 */
	srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
	list_del_rcu(&opp->node);
	call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, kfree_opp_rcu);

	if (list_empty(&dev_opp->opp_list)) {
		list_del_rcu(&dev_opp->node);
		call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head,
			  kfree_device_rcu);
	}
}

/**
 * dev_pm_opp_remove()  - Remove an OPP from OPP list
 * @dev:	device for which we do this operation
 * @freq:	OPP to remove with matching 'freq'
 *
 * This function removes an opp from the opp list.
 */
void dev_pm_opp_remove(struct device *dev, unsigned long freq)
{
	struct dev_pm_opp *opp;
	struct device_opp *dev_opp;
	bool found = false;

	/* Hold our list modification lock here */
	mutex_lock(&dev_opp_list_lock);

	dev_opp = find_device_opp(dev);
	if (IS_ERR(dev_opp))
		goto unlock;

	list_for_each_entry(opp, &dev_opp->opp_list, node) {
		if (opp->rate == freq) {
			found = true;
			break;
		}
	}

	if (!found) {
		dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n",
			 __func__, freq);
		goto unlock;
	}

	__dev_pm_opp_remove(dev_opp, opp);
unlock:
	mutex_unlock(&dev_opp_list_lock);
}
EXPORT_SYMBOL_GPL(dev_pm_opp_remove);

573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594
/**
 * opp_set_availability() - helper to set the availability of an opp
 * @dev:		device for which we do this operation
 * @freq:		OPP frequency to modify availability
 * @availability_req:	availability status requested for this opp
 *
 * Set the availability of an OPP with an RCU operation, opp_{enable,disable}
 * share a common logic which is isolated here.
 *
 * Returns -EINVAL for bad pointers, -ENOMEM if no memory available for the
 * copy operation, returns 0 if no modifcation was done OR modification was
 * successful.
 *
 * Locking: The internal device_opp and opp structures are RCU protected.
 * Hence this function internally uses RCU updater strategy with mutex locks to
 * keep the integrity of the internal data structures. Callers should ensure
 * that this function is *NOT* called under RCU protection or in contexts where
 * mutex locking or synchronize_rcu() blocking calls cannot be used.
 */
static int opp_set_availability(struct device *dev, unsigned long freq,
		bool availability_req)
{
595
	struct device_opp *tmp_dev_opp, *dev_opp = ERR_PTR(-ENODEV);
596
	struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
597 598 599
	int r = 0;

	/* keep the node allocated */
600
	new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643
	if (!new_opp) {
		dev_warn(dev, "%s: Unable to create OPP\n", __func__);
		return -ENOMEM;
	}

	mutex_lock(&dev_opp_list_lock);

	/* Find the device_opp */
	list_for_each_entry(tmp_dev_opp, &dev_opp_list, node) {
		if (dev == tmp_dev_opp->dev) {
			dev_opp = tmp_dev_opp;
			break;
		}
	}
	if (IS_ERR(dev_opp)) {
		r = PTR_ERR(dev_opp);
		dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r);
		goto unlock;
	}

	/* Do we have the frequency? */
	list_for_each_entry(tmp_opp, &dev_opp->opp_list, node) {
		if (tmp_opp->rate == freq) {
			opp = tmp_opp;
			break;
		}
	}
	if (IS_ERR(opp)) {
		r = PTR_ERR(opp);
		goto unlock;
	}

	/* Is update really needed? */
	if (opp->available == availability_req)
		goto unlock;
	/* copy the old data over */
	*new_opp = *opp;

	/* plug in new node */
	new_opp->available = availability_req;

	list_replace_rcu(&opp->node, &new_opp->node);
	mutex_unlock(&dev_opp_list_lock);
644
	call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, kfree_opp_rcu);
645

646 647
	/* Notify the change of the OPP availability */
	if (availability_req)
648
		srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ENABLE,
649 650
					 new_opp);
	else
651
		srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_DISABLE,
652 653
					 new_opp);

V
Vincent Guittot 已提交
654
	return 0;
655 656 657 658 659 660 661 662

unlock:
	mutex_unlock(&dev_opp_list_lock);
	kfree(new_opp);
	return r;
}

/**
663
 * dev_pm_opp_enable() - Enable a specific OPP
664 665 666 667 668
 * @dev:	device for which we do this operation
 * @freq:	OPP frequency to enable
 *
 * Enables a provided opp. If the operation is valid, this returns 0, else the
 * corresponding error value. It is meant to be used for users an OPP available
669
 * after being temporarily made unavailable with dev_pm_opp_disable.
670 671 672 673 674 675 676
 *
 * Locking: The internal device_opp and opp structures are RCU protected.
 * Hence this function indirectly uses RCU and mutex locks to keep the
 * integrity of the internal data structures. Callers should ensure that
 * this function is *NOT* called under RCU protection or in contexts where
 * mutex locking or synchronize_rcu() blocking calls cannot be used.
 */
677
int dev_pm_opp_enable(struct device *dev, unsigned long freq)
678 679 680
{
	return opp_set_availability(dev, freq, true);
}
681
EXPORT_SYMBOL_GPL(dev_pm_opp_enable);
682 683

/**
684
 * dev_pm_opp_disable() - Disable a specific OPP
685 686 687 688 689 690
 * @dev:	device for which we do this operation
 * @freq:	OPP frequency to disable
 *
 * Disables a provided opp. If the operation is valid, this returns
 * 0, else the corresponding error value. It is meant to be a temporary
 * control by users to make this OPP not available until the circumstances are
691
 * right to make it available again (with a call to dev_pm_opp_enable).
692 693 694 695 696 697 698
 *
 * Locking: The internal device_opp and opp structures are RCU protected.
 * Hence this function indirectly uses RCU and mutex locks to keep the
 * integrity of the internal data structures. Callers should ensure that
 * this function is *NOT* called under RCU protection or in contexts where
 * mutex locking or synchronize_rcu() blocking calls cannot be used.
 */
699
int dev_pm_opp_disable(struct device *dev, unsigned long freq)
700 701 702
{
	return opp_set_availability(dev, freq, false);
}
703
EXPORT_SYMBOL_GPL(dev_pm_opp_disable);
704

705
/**
706
 * dev_pm_opp_get_notifier() - find notifier_head of the device with opp
707 708
 * @dev:	device pointer used to lookup device OPPs.
 */
709
struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev)
710 711 712 713
{
	struct device_opp *dev_opp = find_device_opp(dev);

	if (IS_ERR(dev_opp))
714
		return ERR_CAST(dev_opp); /* matching type */
715

716
	return &dev_opp->srcu_head;
717
}
718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752

#ifdef CONFIG_OF
/**
 * of_init_opp_table() - Initialize opp table from device tree
 * @dev:	device pointer used to lookup device OPPs.
 *
 * Register the initial OPP table with the OPP library for given device.
 */
int of_init_opp_table(struct device *dev)
{
	const struct property *prop;
	const __be32 *val;
	int nr;

	prop = of_find_property(dev->of_node, "operating-points", NULL);
	if (!prop)
		return -ENODEV;
	if (!prop->value)
		return -ENODATA;

	/*
	 * Each OPP is a set of tuples consisting of frequency and
	 * voltage like <freq-kHz vol-uV>.
	 */
	nr = prop->length / sizeof(u32);
	if (nr % 2) {
		dev_err(dev, "%s: Invalid OPP list\n", __func__);
		return -EINVAL;
	}

	val = prop->value;
	while (nr) {
		unsigned long freq = be32_to_cpup(val++) * 1000;
		unsigned long volt = be32_to_cpup(val++);

753
		if (dev_pm_opp_add_dynamic(dev, freq, volt, false))
754 755 756 757 758 759 760
			dev_warn(dev, "%s: Failed to add OPP %ld\n",
				 __func__, freq);
		nr -= 2;
	}

	return 0;
}
761
EXPORT_SYMBOL_GPL(of_init_opp_table);
762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791

/**
 * of_free_opp_table() - Free OPP table entries created from static DT entries
 * @dev:	device pointer used to lookup device OPPs.
 *
 * Free OPPs created using static entries present in DT.
 */
void of_free_opp_table(struct device *dev)
{
	struct device_opp *dev_opp = find_device_opp(dev);
	struct dev_pm_opp *opp, *tmp;

	/* Check for existing list for 'dev' */
	dev_opp = find_device_opp(dev);
	if (WARN(IS_ERR(dev_opp), "%s: dev_opp: %ld\n", dev_name(dev),
		 PTR_ERR(dev_opp)))
		return;

	/* Hold our list modification lock here */
	mutex_lock(&dev_opp_list_lock);

	/* Free static OPPs */
	list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) {
		if (!opp->dynamic)
			__dev_pm_opp_remove(dev_opp, opp);
	}

	mutex_unlock(&dev_opp_list_lock);
}
EXPORT_SYMBOL_GPL(of_free_opp_table);
792
#endif