au1xxx-ide.c 17.9 KB
Newer Older
P
Pete Popov 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
/*
 * BRIEF MODULE DESCRIPTION
 * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
 *
 * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
 *
 * This program is free software; you can redistribute it and/or modify it under
 * the terms of the GNU General Public License as published by the Free Software
 * Foundation; either version 2 of the License, or (at your option) any later
 * version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
 *       Interface and Linux Device Driver" Application Note.
 */
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
J
Jordan Crouse 已提交
34 35
#include <linux/platform_device.h>

P
Pete Popov 已提交
36 37 38 39 40 41
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/sysdev.h>

#include <linux/dma-mapping.h>

J
Jordan Crouse 已提交
42 43
#include "ide-timing.h"

P
Pete Popov 已提交
44 45 46 47 48 49 50
#include <asm/io.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>

#include <asm/mach-au1x00/au1xxx_ide.h>

#define DRV_NAME	"au1200-ide"
J
Jordan Crouse 已提交
51
#define DRV_AUTHOR	"Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
P
Pete Popov 已提交
52

J
Jordan Crouse 已提交
53 54
/* enable the burstmode in the dbdma */
#define IDE_AU1XXX_BURSTMODE	1
P
Pete Popov 已提交
55

J
Jordan Crouse 已提交
56 57
static _auide_hwif auide_hwif;
static int dbdma_init_done;
P
Pete Popov 已提交
58 59 60

#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)

J
Jordan Crouse 已提交
61
void auide_insw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
62
{
J
Jordan Crouse 已提交
63 64 65
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
66

J
Jordan Crouse 已提交
67 68 69 70 71 72 73 74 75 76
	if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, 
			   DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->rx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
77 78
}

J
Jordan Crouse 已提交
79
void auide_outsw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
80
{
J
Jordan Crouse 已提交
81 82 83
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
84

J
Jordan Crouse 已提交
85 86 87 88 89 90 91 92 93 94
	if(!put_source_flags(ahwif->tx_chan, (void*)addr,
			     count << 1, DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->tx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
95 96 97 98
}

#endif

99
static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
P
Pete Popov 已提交
100
{
101
	int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
J
Jordan Crouse 已提交
102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158

	/* set pio mode! */
	switch(pio) {
	case 0:
		mem_sttime = SBC_IDE_TIMING(PIO0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
		break;

	case 1:
		mem_sttime = SBC_IDE_TIMING(PIO1);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
		break;

	case 2:
		mem_sttime = SBC_IDE_TIMING(PIO2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
		break;

	case 3:
		mem_sttime = SBC_IDE_TIMING(PIO3);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;

		break;

	case 4:
		mem_sttime = SBC_IDE_TIMING(PIO4);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
		break;
	}

	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);
P
Pete Popov 已提交
159 160
}

161
static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
P
Pete Popov 已提交
162
{
163
	int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
P
Pete Popov 已提交
164

J
Jordan Crouse 已提交
165
	switch(speed) {
P
Pete Popov 已提交
166
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196
	case XFER_MW_DMA_2:
		mem_sttime = SBC_IDE_TIMING(MDMA2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;

		break;
	case XFER_MW_DMA_1:
		mem_sttime = SBC_IDE_TIMING(MDMA1);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;

		break;
	case XFER_MW_DMA_0:
		mem_sttime = SBC_IDE_TIMING(MDMA0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;

		break;
P
Pete Popov 已提交
197
#endif
J
Jordan Crouse 已提交
198
	}
199

J
Jordan Crouse 已提交
200 201
	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);
P
Pete Popov 已提交
202 203 204 205 206 207
}

/*
 * Multi-Word DMA + DbDMA functions
 */

J
Jordan Crouse 已提交
208
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
P
Pete Popov 已提交
209 210
static int auide_build_dmatable(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
211 212 213 214 215 216 217 218 219 220 221 222
	int i, iswrite, count = 0;
	ide_hwif_t *hwif = HWIF(drive);

	struct request *rq = HWGROUP(drive)->rq;

	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
	struct scatterlist *sg;

	iswrite = (rq_data_dir(rq) == WRITE);
	/* Save for interrupt context */
	ahwif->drive = drive;

223
	hwif->sg_nents = i = ide_build_sglist(drive, rq);
J
Jordan Crouse 已提交
224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254

	if (!i)
		return 0;

	/* fill the descriptors */
	sg = hwif->sg_table;
	while (i && sg_dma_len(sg)) {
		u32 cur_addr;
		u32 cur_len;

		cur_addr = sg_dma_address(sg);
		cur_len = sg_dma_len(sg);

		while (cur_len) {
			u32 flags = DDMA_FLAGS_NOIE;
			unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;

			if (++count >= PRD_ENTRIES) {
				printk(KERN_WARNING "%s: DMA table too small\n",
				       drive->name);
				goto use_pio_instead;
			}

			/* Lets enable intr for the last descriptor only */
			if (1==i)
				flags = DDMA_FLAGS_IE;
			else
				flags = DDMA_FLAGS_NOIE;

			if (iswrite) {
				if(!put_source_flags(ahwif->tx_chan, 
J
Jens Axboe 已提交
255
						     (void*) sg_virt(sg),
J
Jordan Crouse 已提交
256 257 258
						     tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
259
				}
J
Jordan Crouse 已提交
260
			} else 
P
Pete Popov 已提交
261
			{
J
Jordan Crouse 已提交
262
				if(!put_dest_flags(ahwif->rx_chan, 
J
Jens Axboe 已提交
263
						   (void*) sg_virt(sg),
J
Jordan Crouse 已提交
264 265 266
						   tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
267
				}
J
Jordan Crouse 已提交
268
			}
P
Pete Popov 已提交
269

J
Jordan Crouse 已提交
270 271 272
			cur_addr += tc;
			cur_len -= tc;
		}
J
Jens Axboe 已提交
273
		sg = sg_next(sg);
J
Jordan Crouse 已提交
274 275
		i--;
	}
P
Pete Popov 已提交
276

J
Jordan Crouse 已提交
277 278
	if (count)
		return 1;
P
Pete Popov 已提交
279

J
Jordan Crouse 已提交
280
 use_pio_instead:
281
	ide_destroy_dmatable(drive);
P
Pete Popov 已提交
282

J
Jordan Crouse 已提交
283
	return 0; /* revert to PIO for this request */
P
Pete Popov 已提交
284 285 286 287
}

static int auide_dma_end(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
288
	ide_hwif_t *hwif = HWIF(drive);
P
Pete Popov 已提交
289

J
Jordan Crouse 已提交
290
	if (hwif->sg_nents) {
291
		ide_destroy_dmatable(drive);
J
Jordan Crouse 已提交
292 293
		hwif->sg_nents = 0;
	}
P
Pete Popov 已提交
294

J
Jordan Crouse 已提交
295
	return 0;
P
Pete Popov 已提交
296 297 298 299 300 301 302 303 304
}

static void auide_dma_start(ide_drive_t *drive )
{
}


static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
J
Jordan Crouse 已提交
305 306 307
	/* issue cmd to drive */
	ide_execute_command(drive, command, &ide_dma_intr,
			    (2*WAIT_CMD), NULL);
P
Pete Popov 已提交
308 309 310
}

static int auide_dma_setup(ide_drive_t *drive)
J
Jordan Crouse 已提交
311 312
{       	
	struct request *rq = HWGROUP(drive)->rq;
P
Pete Popov 已提交
313

J
Jordan Crouse 已提交
314 315 316 317
	if (!auide_build_dmatable(drive)) {
		ide_map_sg(drive, rq);
		return 1;
	}
P
Pete Popov 已提交
318

J
Jordan Crouse 已提交
319 320
	drive->waiting_for_dma = 1;
	return 0;
P
Pete Popov 已提交
321 322
}

323
static u8 auide_mdma_filter(ide_drive_t *drive)
P
Pete Popov 已提交
324
{
325 326 327 328 329 330 331 332
	/*
	 * FIXME: ->white_list and ->black_list are based on completely bogus
	 * ->ide_dma_check implementation which didn't set neither the host
	 * controller timings nor the device for the desired transfer mode.
	 *
	 * They should be either removed or 0x00 MWDMA mask should be
	 * returned for devices on the ->black_list.
	 */
J
Jordan Crouse 已提交
333

334
	if (dbdma_init_done == 0) {
J
Jordan Crouse 已提交
335 336 337 338 339 340 341 342
		auide_hwif.white_list = ide_in_drive_list(drive->id,
							  dma_white_list);
		auide_hwif.black_list = ide_in_drive_list(drive->id,
							  dma_black_list);
		auide_hwif.drive = drive;
		auide_ddma_init(&auide_hwif);
		dbdma_init_done = 1;
	}
P
Pete Popov 已提交
343

J
Jordan Crouse 已提交
344
	/* Is the drive in our DMA black list? */
345
	if (auide_hwif.black_list)
J
Jordan Crouse 已提交
346
		printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n",
347
				    drive->name, drive->id->model);
J
Jordan Crouse 已提交
348

349 350 351
	return drive->hwif->mwdma_mask;
}

P
Pete Popov 已提交
352
static int auide_dma_test_irq(ide_drive_t *drive)
J
Jordan Crouse 已提交
353 354 355
{	
	if (drive->waiting_for_dma == 0)
		printk(KERN_WARNING "%s: ide_dma_test_irq \
P
Pete Popov 已提交
356 357
                                     called while not waiting\n", drive->name);

J
Jordan Crouse 已提交
358 359
	/* If dbdma didn't execute the STOP command yet, the
	 * active bit is still set
P
Pete Popov 已提交
360
	 */
J
Jordan Crouse 已提交
361 362 363
	drive->waiting_for_dma++;
	if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
		printk(KERN_WARNING "%s: timeout waiting for ddma to \
P
Pete Popov 已提交
364
                                     complete\n", drive->name);
J
Jordan Crouse 已提交
365 366 367 368
		return 1;
	}
	udelay(10);
	return 0;
P
Pete Popov 已提交
369 370
}

371
static void auide_dma_host_set(ide_drive_t *drive, int on)
P
Pete Popov 已提交
372 373 374
{
}

375
static void auide_dma_lost_irq(ide_drive_t *drive)
P
Pete Popov 已提交
376
{
J
Jordan Crouse 已提交
377
	printk(KERN_ERR "%s: IRQ lost\n", drive->name);
P
Pete Popov 已提交
378 379
}

380
static void auide_ddma_tx_callback(int irq, void *param)
P
Pete Popov 已提交
381
{
J
Jordan Crouse 已提交
382 383
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
P
Pete Popov 已提交
384 385
}

386
static void auide_ddma_rx_callback(int irq, void *param)
P
Pete Popov 已提交
387
{
J
Jordan Crouse 已提交
388 389 390 391 392
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
}

#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
P
Pete Popov 已提交
393

J
Jordan Crouse 已提交
394 395 396 397 398 399 400 401 402
static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
{
	dev->dev_id          = dev_id;
	dev->dev_physaddr    = (u32)AU1XXX_ATA_PHYS_ADDR;
	dev->dev_intlevel    = 0;
	dev->dev_intpolarity = 0;
	dev->dev_tsize       = tsize;
	dev->dev_devwidth    = devwidth;
	dev->dev_flags       = flags;
P
Pete Popov 已提交
403
}
J
Jordan Crouse 已提交
404 405
  
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
P
Pete Popov 已提交
406

407
static void auide_dma_timeout(ide_drive_t *drive)
P
Pete Popov 已提交
408
{
409
	ide_hwif_t *hwif = HWIF(drive);
P
Pete Popov 已提交
410

J
Jordan Crouse 已提交
411
	printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
P
Pete Popov 已提交
412

413 414
	if (hwif->ide_dma_test_irq(drive))
		return;
P
Pete Popov 已提交
415

416
	hwif->ide_dma_end(drive);
P
Pete Popov 已提交
417
}
J
Jordan Crouse 已提交
418
					
P
Pete Popov 已提交
419

J
Jordan Crouse 已提交
420 421 422 423 424
static int auide_ddma_init(_auide_hwif *auide) {
	
	dbdev_tab_t source_dev_tab, target_dev_tab;
	u32 dev_id, tsize, devwidth, flags;
	ide_hwif_t *hwif = auide->hwif;
P
Pete Popov 已提交
425

J
Jordan Crouse 已提交
426
	dev_id   = AU1XXX_ATA_DDMA_REQ;
P
Pete Popov 已提交
427

J
Jordan Crouse 已提交
428 429 430 431 432 433 434 435 436 437 438
	if (auide->white_list || auide->black_list) {
		tsize    = 8;
		devwidth = 32;
	}
	else { 
		tsize    = 1;
		devwidth = 16;
		
		printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model);
		printk(KERN_ERR "            please read 'Documentation/mips/AU1xxx_IDE.README'");
	}
P
Pete Popov 已提交
439

J
Jordan Crouse 已提交
440 441
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
P
Pete Popov 已提交
442
#else
J
Jordan Crouse 已提交
443
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
444 445
#endif

J
Jordan Crouse 已提交
446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* We also need to add a target device for the DMA */
	auide_init_dbdma_dev( &target_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      tsize, devwidth, DEV_FLAGS_ANYUSE);
	auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);	
 
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
						 auide->tx_dev_id,
						 auide_ddma_tx_callback,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 auide->target_dev_id,
						 auide_ddma_rx_callback,
						 (void*)auide);

	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
480
	hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev,
J
Jordan Crouse 已提交
481 482 483 484 485 486 487 488
						PRD_ENTRIES * PRD_BYTES,        /* 1 Page */
						&hwif->dmatable_dma, GFP_KERNEL);
	
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 
	return 0;
} 
P
Pete Popov 已提交
489
#else
J
Jordan Crouse 已提交
490 491 492 493 494
 
static int auide_ddma_init( _auide_hwif *auide )
{
	dbdev_tab_t source_dev_tab;
	int flags;
P
Pete Popov 已提交
495

J
Jordan Crouse 已提交
496 497 498 499
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
#else
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
500 501
#endif

J
Jordan Crouse 已提交
502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
						 auide->tx_dev_id,
						 NULL,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 DSCR_CMD0_ALWAYS,
						 NULL,
						 (void*)auide);
 
	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 	
	return 0;
P
Pete Popov 已提交
534
}
J
Jordan Crouse 已提交
535
#endif
P
Pete Popov 已提交
536 537 538

static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
{
J
Jordan Crouse 已提交
539 540 541 542 543 544 545 546 547 548
	int i;
	unsigned long *ata_regs = hw->io_ports;

	/* FIXME? */
	for (i = 0; i < IDE_CONTROL_OFFSET; i++) {
		*ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET);
	}

	/* set the Alternative Status register */
	*ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET);
P
Pete Popov 已提交
549 550 551 552 553
}

static int au_ide_probe(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
J
Jordan Crouse 已提交
554 555
	_auide_hwif *ahwif = &auide_hwif;
	ide_hwif_t *hwif;
P
Pete Popov 已提交
556 557
	struct resource *res;
	int ret = 0;
558
	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
559
	hw_regs_t hw;
P
Pete Popov 已提交
560 561

#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
J
Jordan Crouse 已提交
562
	char *mode = "MWDMA2";
P
Pete Popov 已提交
563
#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
J
Jordan Crouse 已提交
564
	char *mode = "PIO+DDMA(offload)";
P
Pete Popov 已提交
565 566
#endif

J
Jordan Crouse 已提交
567
	memset(&auide_hwif, 0, sizeof(_auide_hwif));
P
Pete Popov 已提交
568 569 570 571 572 573 574
	ahwif->irq = platform_get_irq(pdev, 0);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	if (res == NULL) {
		pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
575 576 577 578 579
		goto out;
	}
	if (ahwif->irq < 0) {
		pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
P
Pete Popov 已提交
580 581 582
		goto out;
	}

J
Jordan Crouse 已提交
583
	if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
P
Pete Popov 已提交
584
		pr_debug("%s: request_mem_region failed\n", DRV_NAME);
J
Jordan Crouse 已提交
585
		ret =  -EBUSY;
P
Pete Popov 已提交
586
		goto out;
J
Jordan Crouse 已提交
587
	}
P
Pete Popov 已提交
588 589 590 591 592 593 594

	ahwif->regbase = (u32)ioremap(res->start, res->end-res->start);
	if (ahwif->regbase == 0) {
		ret = -ENOMEM;
		goto out;
	}

J
Jordan Crouse 已提交
595 596 597
	/* FIXME:  This might possibly break PCMCIA IDE devices */

	hwif                            = &ide_hwifs[pdev->id];
P
Pete Popov 已提交
598

599 600
	memset(&hw, 0, sizeof(hw));
	auide_setup_ports(&hw, ahwif);
601
	hw.irq = ahwif->irq;
602
	hw.dev = dev;
603 604 605
	hw.chipset = ide_au1xxx;

	ide_init_port_hw(hwif, &hw);
P
Pete Popov 已提交
606

607 608
	hwif->dev = dev;

J
Jordan Crouse 已提交
609
	hwif->ultra_mask                = 0x0;  /* Disable Ultra DMA */
P
Pete Popov 已提交
610
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
611 612
	hwif->mwdma_mask                = 0x07; /* Multimode-2 DMA  */
	hwif->swdma_mask                = 0x00;
P
Pete Popov 已提交
613
#else
J
Jordan Crouse 已提交
614 615 616 617
	hwif->mwdma_mask                = 0x0;
	hwif->swdma_mask                = 0x0;
#endif

B
Bartlomiej Zolnierkiewicz 已提交
618
	hwif->pio_mask = ATA_PIO4;
619
	hwif->host_flags = IDE_HFLAG_POST_SET_MODE;
B
Bartlomiej Zolnierkiewicz 已提交
620

J
Jordan Crouse 已提交
621 622 623 624 625
	hwif->drives[0].unmask          = 1;
	hwif->drives[1].unmask          = 1;

	/* hold should be on in all cases */
	hwif->hold                      = 1;
626 627

	hwif->mmio  = 1;
J
Jordan Crouse 已提交
628 629 630 631 632 633 634 635

	/* If the user has selected DDMA assisted copies,
	   then set up a few local I/O function entry points 
	*/

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA	
	hwif->INSW                      = auide_insw;
	hwif->OUTSW                     = auide_outsw;
P
Pete Popov 已提交
636
#endif
J
Jordan Crouse 已提交
637

638
	hwif->set_pio_mode		= &au1xxx_set_pio_mode;
639
	hwif->set_dma_mode		= &auide_set_dma_mode;
P
Pete Popov 已提交
640 641

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
642
	hwif->dma_timeout		= &auide_dma_timeout;
J
Jordan Crouse 已提交
643

644 645
	hwif->mdma_filter		= &auide_mdma_filter;

646
	hwif->dma_host_set		= &auide_dma_host_set;
J
Jordan Crouse 已提交
647 648 649 650 651
	hwif->dma_exec_cmd              = &auide_dma_exec_cmd;
	hwif->dma_start                 = &auide_dma_start;
	hwif->ide_dma_end               = &auide_dma_end;
	hwif->dma_setup                 = &auide_dma_setup;
	hwif->ide_dma_test_irq          = &auide_dma_test_irq;
652
	hwif->dma_lost_irq		= &auide_dma_lost_irq;
653
#endif
J
Jordan Crouse 已提交
654 655 656 657 658
	hwif->channel                   = 0;
	hwif->select_data               = 0;    /* no chipset-specific code */
	hwif->config_data               = 0;    /* no chipset-specific code */

	hwif->drives[0].autotune        = 1;    /* 1=autotune, 2=noautotune, 0=default */
659
	hwif->drives[1].autotune	= 1;
660

661 662
	hwif->drives[0].no_io_32bit	= 1;
	hwif->drives[1].no_io_32bit	= 1;
P
Pete Popov 已提交
663

J
Jordan Crouse 已提交
664 665
	auide_hwif.hwif                 = hwif;
	hwif->hwif_data                 = &auide_hwif;
P
Pete Popov 已提交
666

J
Jordan Crouse 已提交
667 668 669
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA           
	auide_ddma_init(&auide_hwif);
	dbdma_init_done = 1;
P
Pete Popov 已提交
670 671
#endif

672
	idx[0] = hwif->index;
673

674
	ide_device_add(idx);
675

P
Pete Popov 已提交
676 677
	dev_set_drvdata(dev, hwif);

J
Jordan Crouse 已提交
678
	printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
P
Pete Popov 已提交
679

J
Jordan Crouse 已提交
680 681
 out:
	return ret;
P
Pete Popov 已提交
682 683 684 685 686 687 688
}

static int au_ide_remove(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct resource *res;
	ide_hwif_t *hwif = dev_get_drvdata(dev);
J
Jordan Crouse 已提交
689
	_auide_hwif *ahwif = &auide_hwif;
P
Pete Popov 已提交
690

691
	ide_unregister(hwif->index);
P
Pete Popov 已提交
692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712

	iounmap((void *)ahwif->regbase);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	release_mem_region(res->start, res->end - res->start);

	return 0;
}

static struct device_driver au1200_ide_driver = {
	.name		= "au1200-ide",
	.bus		= &platform_bus_type,
	.probe 		= au_ide_probe,
	.remove		= au_ide_remove,
};

static int __init au_ide_init(void)
{
	return driver_register(&au1200_ide_driver);
}

J
Jordan Crouse 已提交
713
static void __exit au_ide_exit(void)
P
Pete Popov 已提交
714 715 716 717 718 719 720 721 722
{
	driver_unregister(&au1200_ide_driver);
}

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AU1200 IDE driver");

module_init(au_ide_init);
module_exit(au_ide_exit);